How to turn on, turn off, and restart iPhone 11, iPhone 11 Pro, and iPhone 11 Pro Max?
Freezing your iPhone, especially if it costs more than 1000, is not the most pleasant case. Apple technology has never been 100 percent perfect, and that’s a fact.
Therefore, sometimes it becomes necessary to reboot the device. If you do this on iPhone 11, iPhone 11 Pro or iPhone 11 Pro Max, then you already need to know a certain key combination.
Let’s go through in order how to properly turn on, turn off and, if necessary, hard restart your brand new “iPhone 11”.
How to turn on / off iPhone 11 / iPhone 11 Pro / iPhone 11 Pro Max?
The number of buttons is getting smaller and this is both good and bad. Poor because it takes a little time to get used to new gestures.
But as soon as you get used to it, everything becomes very simple and clear. As practice shows, Apple changes only for the better.
If you have used the iPhone X even a little, then this information will not be new to you. However, there is another category of users.
- Power on iPhone 11/11 Pro / 11 Pro Max. You need to hold down the button on the right until the Apple logo appears. Then, after a few seconds, the device is turned on and everything is ready to work.
- Restart / Shutdown iPhone 11/11 Pro / Pro Max. In the case when your device is just a little, you can get by with a regular reboot.
To do this, you just need to hold down the same button on the right until the slider appears and then swipe it to the right side (this is also the shutdown process).
15-20 seconds pass and then you can turn on the device by holding the button on the right.
If this button does not work for some reason, you can always carry out this procedure through Settings. General. Disable.
How to Force Restart iPhone 11 / iPhone 11 Pro / iPhone 11 Pro Max?
Situations are completely different, especially if you are using the beta version of iOS and therefore, often a simple restart may not help.
After all, if the screen is completely frozen and you cannot do anything, then you have to resort to a hard reboot.
My iPhone 11, 11 Pro, or 11 Pro Max Won’t Turn On! Here’s The Fix.
On the iPhone 11, iPhone 11 Pro, and iPhone 11 Pro Max, it works in a very specific way:
- press and release the Volume Up button;
- press and release the Volume Down button;
- press and hold the Lock button (button on the right) until the recovery screen appears.
As you probably guessed, the same method works for the iPhone XS as well. Basically, it fits all iPhones with cutouts.
Create a quick command to turn on the flashlight
In 2018, in iOS 12, Apple added a new Teams app. With it, you can perform complex chains of actions with voice commands and more. Here you can also create a command to turn on the flashlight and add it to your home screen or even a screen with widgets.
If you don’t have the Teams app on your iPhone, download it from the App Store.
Open the Teams app and click the New Team button.
In the search bar on the next screen, enter “flashlight” and select On / Off from the results. flashlight.
In the upper right corner of the window, click on the radio buttons.
Here name the command as it is convenient for you, select an icon for it. You can also select the “Show in Widget” and “Show on Export” options to have access to the command from anywhere.
Now click Add to Home Screen. Follow the instructions on the screen.
A team icon appears on your home screen with the name and icon of your choice. Tap it to turn the flashlight on or off.
You can also add the Commands app widget to the widget screen and control your flashlight from there.
Not sure how to turn off the flashlight on iPhone now? Everything is very simple. For almost every method above, a repetitive action will work. For example, you need to tap the flashlight icon in Control Center again, or ask Siri to turn off the flashlight on your iPhone.
Close the Camera app
If you have the Camera app open, the flashlight will not work. Open the app switcher and then swipe the Camera to force close it.
- On iPhone X and later, swipe up from the bottom edge and stop in the center of the screen.
- On iPhone 8 and older, double-tap the Home button.
How To Turn OFF The iPhone 11 Pro Max, 11 Pro, 11
How to turn on the flashlight through the Control Center
By default, there is also a flashlight icon in Control Center. Swipe down from the top-right corner (up from the bottom edge on older models) to open Control Center. Tap the flashlight icon to turn it on. You can also long press to adjust the light intensity.
If you don’t have a flashlight icon in Control Center, go to Settings Control Center Customize Element. management. Here, select Flashlight from the list below to add it to Control Center. The position of the icon can be changed by dragging in the top list.
Why iPhone Flashlight Doesn’t Work
Now you know how to use a flashlight on your iPhone, which means you can always be sure that it will help you out at the right time. But what to do if iPhone flashlight doesn’t work?
Well, there are several ways to solve this problem, and below we will tell about them.
How to ask Siri to turn on the flashlight
With each new version of iOS, Apple is adding more and more new features to its personal assistant Siri. Starting with iOS 12, you can ask Siri to turn the flashlight on or off on iPhone.
Activate Siri by holding down the power button or using the phrase “Hey Siri.” Then say “turn on the flashlight” or “turn off the flashlight.” Siri cannot be used to adjust light intensity.
You can also control the flashlight using other voice commands, so you can experiment.
There is one caveat. Siri requires an active internet connection to turn the flashlight on and off on iPhone.
Charge your iPhone
If your smartphone is almost empty, the flashlight may not work therefore. This also happens if the device is too hot or overcooled. Charge your iPhone, let it warm up or cool down, then try again.
How to turn on the flashlight on iPhone through the lock screen
Apple has added two icons to the lock screen: a flashlight and a camera. They can be used even without unlocking the iPhone. Activate your smartphone screen and then long tap on the flashlight icon to turn it on.
This is the fastest way to turn on the flashlight on iPhone 11 or any other with the new version of iOS when it is locked. Unfortunately, you cannot change the position of the icon on the screen.
How to enable / set up Siri in Apple iPhone 11 Pro Max?
How to enable Siri in Apple iPhone 11 Pro Max? How to use Siri in Apple iPhone 11 Pro Max? How to enable Siri in Apple iPhone 11 Pro Max? How to enable Siri in Apple iPhone 11 Pro Max? How to add Siri to Apple iPhone 11 Pro Max? How to set up Siri in Apple iPhone 11 Pro Max? How to set up Siri in Apple iPhone 11 Pro Max? How to Control iOS Using Voice in Apple iPhone 11 Pro Max? How to enable voice control in Apple iPhone 11 Pro Max? How to enable Siri with “Hey Siri” in Apple iPhone 11 Pro Max? How to enable siri using home button in Apple iPhone 11 Pro Max? How to turn off Hey Siri voice prompt in Apple iPhone 11 Pro Max? How to disable Siri from turning on with the home button of Apple iPhone 11 Pro Max? How to enable Voice Assistant in Apple iPhone 11 Pro Max? How to change Siri’s voice in Apple iPhone 11 Pro Max? How to change Siri language in Apple iPhone 11 Pro Max? How to Allow Siri on Locked Phone in Apple iPhone 11 Pro Max?
Siri. an assistant that uses voice prompts and a natural language user interface to answer questions, make recommendations, and take action, delegating requests to a number of Internet services. It is a very useful tool that makes our life easier and more convenient, it is worth keeping it on your Apple device. Today we are going to explain to you how to enable Siri, you can activate it with the Home button or simply by calling Hey Siri. Follow our instructions and install Siri in a few easy steps!
- In the first step, open Settings.
- Second, go to Siri Search.
- Now you have the opportunity to enable Siri and choose how to activate it.
- Select activation method or both and confirm by clicking Enable in the notification window.
- There you can also adjust some of the options to suit your needs, such as language, voice feedback, Siri voice, or turning it on on a locked device.
- amazing work!
If this solution helped you, share it with others to help them, and subscribe to our pages at. and Instagram
How to turn off iPhone 11 with buttons
As I said above, the device has a side power button. With its help, you can turn it off, but there is a little trick!
To turn off iPhone 11, do the following in sequence:
Press the side button and one of the volume buttons at the same time. Any. even an increase in volume, even a decrease. The main thing is not to release the buttons immediately after pressing, otherwise a screenshot of the screen will be taken.
The shutdown menu should appear on the smartphone screen, where you need to move the shutdown slider to the right.
If you suddenly change your mind about turning off the iPhone 11, then just click the “Cancel” button at the bottom of the screen.
How to turn off iPhone 11, iPhone 11 Pro and Max
Do you know what my wife’s first question was when she got the iPhone 11? How to turn off or restart your phone! I laughed for a long time, then took the device in my hands, pressed the side power button, held it longer but the iPhone was not going to turn off. Here my wife laughed for a long time, looking at my futile attempts. As it turned out, the developers of the “apple” company, for some reason, changed everything, which made those who switched to the iPhone 11 or iPhone 11 Pro from older models such as the iPhone 6s, iPhone 7 or iPhone 8, as well as smartphones on Android. So it turns out that the usual side shutdown button is there, and it is not clear what to do with it.
The fact is that the way to disable on the iPhone 11 and iPhone 11 Pro is significantly different from previous models. There are two ways to turn off this phone and I will show each of them in detail.
Shutting down iPhone 11 through settings
The developers of the iOS operating system have made another fairly simple way to disable the iPhone 11 (pro, max, etc.). To do this, go to its settings and open the “Basic” section.
Scroll down the menu. At the very end there will be an item “Turn off”. Click it:
The iPhone shutdown menu appears. There, just drag the slider with your finger from left to right.
It remains to wait until the smartphone turns off.
Of course, there is no point in turning off your iPhone often. For some, it works without turning off for months, but situations arise differently and you need to know the main features of your phone! Good luck to all!
How to turn off or restart iPhone X, XS, XS Max, XR, 11, 11 Pro, and 11 Pro Max
Working with the interface of Apple’s bezelless smartphones is very different from controlling devices with a physical Home button. Since pressing the Power key on the iPhone X, XR, XS, XS Max, 11, 11 Pro and 11 Pro Max calls Siri, the button has lost its main function. off. How can I restart or disconnect my new iPhone then? We share with readers in all available ways.
Due to the lack of a Home button on the bezel-less iPhones (from iPhone X to iPhone 11 Pro Max), the keyboard shortcut used to take a screenshot on new Apple smartphones has changed compared to the iPhone 7, 8 and other older models of the company. details in a separate article.
How to turn off iPhone X, XR, XS, XS Max, and iPhone 11, 11 Pro, and 11 Pro Max using hardware keys
While the power button now launches Siri and Apple Pay, new iPhones can still bring up the shutdown slider using the physical keys. Press and hold the power button and one of the volume keys for a couple of seconds.
Two sliders will appear on the screen. Slide the top one to the right and the smartphone turns off.
Shutting down iPhone from the settings menu
This option is present on all Apple smartphones. Go to “Settings”, select “General”, go down to the bottom of the list and click “Turn off”. A window with a slider will open. Drag it to the right to disconnect the device.
Reboot via AssistiveTouch
With AssistiveTouch, you can display a touch-sensitive floating button on your iPhone. By pressing it, a menu with options opens, including taking a screenshot, controlling the volume, switching programs, etc. Reboot can be added to this list.
Go to “Settings” → “General”, click on the item “Accessibility” and select “AssistiveTouch”.
Activate the toggle switch, after which a touch button will appear on the screen. Restart isn’t one of the 6 default options in AssistiveTouch. you’ll have to add it. To do this, in the same window, open the “Top-level menu”.
The list of functions consists of six items. To include a reboot, add an empty cell or replace one of the options. In the second case, click on the icon of the unnecessary function, select the “Restart” item and click “Finish”.
Now, to restart your iPhone, click on the AssistiveTouch button and select “Restart”.
All that remains is to confirm the selection by clicking “Restart”.
Change the aspect ratio for a photo to 16 to 9
Before the release of the iPhone 11 and 11 Pro, Apple smartphones had only two aspect ratios for photography: 4: 3 and 1: 1. On current gadgets, they also added the ability to shoot in 16: 9 format. The new format allows you to capture more of the environment in the frame. space in height or width. With the help of it, it will come out to get an excellent picture of any hills, stretching in breadth of mountain ranges, local attractions in historical cities and not only. Interestingly, the new aspect ratio can also be used in conjunction with the ultra wide-angle camera.
How to do it: open the “Camera”, expand the quick settings menu by swiping up from the bottom edge of the screen, press the button to change the aspect ratio, select the option “16: 9”.
Monitor the use of Deep Fusion mode
“IOS 13.2 introduces the advanced Deep Fusion imaging engine, which uses the Neural Engine built into the A13 Bionic chip to capture photos with improved detail and texture and reduce noise in low-light photos on the iPhone 11 iPhone 11 Pro and iPhone 11 Pro Max ”. (Apple)
One of the main innovations of the “Camera” iPhone 11 and 11 Pro was the Deep Fusion mode, which at the presentation of new gadgets Apple forced especially tightly. But right after the launch of sales of new smartphones, it did not appear. the company postponed it until iOS 13.2. Using neural networks and a mode that automatically starts in low light conditions, new smartphones can create images with as many fine details as possible. Only a few people know that it does not work with an ultra-wide-angle camera, so even its indirect use should be excluded.
How to do it: open “Settings”, go to the “Camera” section, switch to inactive position the switch “Capture photo outside the frame”.
Start shooting video as quickly as possible
The camera app, which has been noticeably updated in the iPhone 11 and 11 Pro, has changed the way it interacts with the shutter button. Previously, a long press on it launched the burst mode, with the help of which it was possible to take a whole set of frames in order to choose the most successful one. This turned out to be useful if there was a desire to capture an interesting moment in active sports. Nevertheless, high-speed shooting with a forced minimum shutter speed killed the quality of photos, which often turned out to be too blurry and noisy. Now the same action starts video recording, which is much more practical.
The quick recording mode is especially useful when you need to create a short video for social networks or instant messengers. There is a possibility that the developers from Apple have spied on the implementation of this feature on Instagram. this is how stories are created there.
How to do it: open the “Camera”, hold your finger on the shutter button to start video recording and release it to stop it.
By the way, if you swipe the shutter button to the right corner of the screen, the video recording mode can be locked in order to continue shooting without holding your finger.
Adjust exposure time for night mode
In extremely low ambient light conditions, the iPhone 11 and 11 Pro activate night mode. this is one of the most anticipated features of the new Apple smartphones. It simulates using a slow shutter speed to get the best possible photo. takes multiple shots and stitches them together using neural networks. The output is a very good quality picture. The shutter speed “Camera” can set automatically, but you can change it to get a creative effect. for example, draw something with a light source right in the air.
How to do it: open the “Camera”, make sure that the night mode is active (the yellow icon at the top of the screen), press the corresponding button and adjust the shutter speed. the maximum level will change depending on the intensity of ambient light.
Switch between modes for the front camera
At the presentation of the iPhone 11, iPhone 11 Pro and iPhone 11 Pro Max, special attention was paid to the increased resolution of the front cameras of new smartphones. Instead of 7 megapixels, which were previously used, they received 12 megapixels. the same as all other matrices that are equipped with gadgets. The only pity is that the company practically did not explain that now users have the ability to switch between modes: use wide angle and 7 megapixels or ultra wide angle and 12 megapixels. Switching between them is carried out automatically during the flip of the gadget: wide for a vertical format and ultra-wide for a horizontal one. But you can also manually.
How to do it: open the “Camera”, switch to selfie mode, click on the button with the image of two arrows in the central part of the screen from the bottom.
Which to choose. iTunes or iCloud?
You may prefer to use iTunes backup instead of iCloud backup. If you do this, keep in mind that it can take much longer. Also make sure you check the box in iTunes to encrypt the backup.
If you have a fast internet connection, it is better to do the recovery using iCloud. it is much faster. Otherwise, iTunes recovery might be the way to go. Remember, if your Mac is running macOS Catalina, you’ll have to use Finder instead of iTunes for backups and restores.
These are the three main ways to set up your new iPhone. Of course, advanced users probably already know all the subtleties, but sometimes experienced owners need to spy on certain points, not to mention newbies (if you have any questions, you can find the answers in our Telegram chat). The latter will be much more after these holidays.
How to set up your new iPhone 11, iPhone 11 Pro, or iPhone 11 Pro Max
Many people prefer to update their smartphone on New Year’s holidays (or give iPhones to loved ones). But it’s one thing if the transition occurs from the iPhone XS to the iPhone 11 Pro, and completely different if the owner of the new smartphone previously had, for example, an iPhone SE or iPhone 6. In recent years, the process of setting up an iPhone has changed as much as ourselves. iPhone. Apple just makes the process easier. And setting up your new iPhone 11 from scratch is just as easy as it used to be. gone are the days of manually copying passwords just to get to your home screen.
Many people find it difficult to set up an iPhone. But everything is very simple
However, there are a few more tricks to get you started using your phone quickly. Let’s see how to properly set up your new iPhone.
Automatic iPhone setup
This fantastic feature was introduced in iOS 11. Just bring your old and new devices close together when prompted, and auto setup will copy your Apple ID and all settings. It’s kind of like AirDrop, with only one specific purpose.
This window appears automatically as soon as you bring up your new iPhone.
When you start your new iPhone for the first time, any nearby iOS devices will detect it and prompt for automatic setup. The new device will display a cloud-like dot pattern on the screen. Just use your old device’s camera to “scan” this pattern as a QR code. Your iCloud login, Wi-Fi passwords and everything else you need are transferred automatically. This is really amazing.
To use migration, you must have an iPhone with iOS 12.4 or later
If you can’t use your current iPhone’s camera, tap Manual Authentication and follow the onscreen instructions. Both iPhones must be nearby and connected to a power source until the data migration process is complete.
Restoring iPhone from Backup
This is the easiest way to switch from your old iPhone to a new one. All you have to do is make sure you have a recent backup from your existing iPhone (or even iPad) and then point your new iPhone 11 to that iCloud backup. It will then download all your settings, apps, passwords, even your wallpapers. When the process is complete. it may take a while, depending on your internet speed and the size of your backup. it will be like you’ve never sold an old iPhone. Even your Safari tabs will stay in place.
The backup time depends on the amount of information on the iPhone
To do this, first go to the iCloud settings on your iPhone and make sure there is a recent automatic backup. If not, just make a new copy manually.
Transfer Data from Android to iPhone
For this there is the Move to iOS application. It can only be installed by users of devices running Android. Move to iOS app lets you quickly transfer contacts, photos, and other data from your Android device to your iOS device. In other words, it is intended for those who decide to switch to iPhone.
It is enough to download this application and follow the instructions
Longreads for you
Previously, it was impossible to transfer chats from WhatsApp to Telegram, but then Pavel Durov’s team decided that it was wrong and implemented this opportunity. Understanding how the export of chats from one messenger to another works
Apple changed the terms of service for the iPhone 12 and began changing the Face ID sensors, back panel, and motherboard. Now, with such damage, you can only apply for repair, without the right to replace
If your Apple Watch won’t charge in Eco Mode, Apple will repair it for free. The company has launched a new repair program for Apple Watch Series 5 and Apple Watch SE. We tell you who it applies to, and how to repair Apple Watch under warranty.
bono_denis, No, it won’t. A week ago, I quietly switched from iPhone 3gs (iOS 6.1.6) to iPhone 5s (iOS 12.4.4)
How to turn off iPhone 11
Holding down the power button on iPhone X and newer devices, which is common on previous models, does not bring up the shutdown menu. Instead, the Siri voice assistant will be activated.
If you turn off Siri or turn off the activation by pressing the side button, then a long press on it will not work at all. You need to turn off your iPhone in one of the following ways:
Shutdown via settings
The shutdown button for this case has long been hidden in the bowels of the system.
Go to Settings. General and at the very bottom of the page we see the Disable button. After pressing, the usual slider appears, one swipe and the smartphone turns off.
When it helps: when you need to turn off your smartphone for a while so that it does not lose battery power.
Switching off via the emergency call menu
Holding down the power button and any of the volume keys on an iPhone with Face ID brings up the emergency call menu. So you can call the rescue service without unlocking your smartphone, look at the owner’s medical record and, of course, restart your iPhone.
When it helps: when to turn off iPhone even without entering an unlock password or face scan.
How to restart or shutdown iPhone 11, X and XS. All ways
After buying a new iPhone 11 or iPhone 11 Pro, many users are wondering how to turn off or restart this smartphone. This information will be especially relevant for those who purchase an Apple smartphone for the first time or switch from an iPhone 8 or older devices.
The methods for rebooting and shutting down these models are slightly different.
How to restart iPhone 11
There are three ways to reboot at once:
Switching off and on
Just hold down any volume button paired with the side button on the opposite side of the smartphone until the shutdown slider appears, move the slider and wait for the iPhone to turn off. After disconnecting, press the power button to re-enable.
When it helps: this method will come in handy if the iPhone starts to glitch, some application does not start, or Bluetooth headphones are not connected. The first and most effective remedy for such failures is to turn off and then turn on the smartphone.
Such a reset also helps to get rid of all sorts of glitches and problems with the iPhone. It can be performed both on a working smartphone and when it freezes.
If the gadget is not responding or you just want to quickly restart your smartphone: press and quickly release the volume up button, press and quickly release the volume down button, then hold down the side button and do not release until the iPhone restarts.
When it helps: This is the only way that helps when iPhone freezes. You can use it to combat glitches and system malfunctions.
Dedicated button for reboot
Using the AssistiveTouch menu, you can create a virtual button to restart your smartphone.
Go to Settings. Accessibility. Touch. AssistiveTouch and activate the main switch. Now add the Restart button to the menu.
You can add it to the top-level menu, set restart on a long press or double tap.
When it helps: this feature is convenient to use if you want to operate your smartphone with one hand. Add volume control buttons, shutdown buttons and others to this menu, after which you can perform manipulations without pressing physical keys.
As noted, the iPhone 11 Pro Max has three rear cameras: wide-angle, ultra-wide-angle, and telephoto. Also, just like the iPhone 11, it has a night mode. We took comparison shots on the iPhone 11 Pro Max and XS Max. The results were commented on by Anton Soloviev.
Gallery iPhone 11 Pro Max (26mm)
IPhone XS Max Gallery (26mm):
We have already discussed the main camera in detail in the article about the iPhone 11. As you can see from the laboratory test results shown in the graph below, the main cameras in smartphones are the same. Perhaps the Pro Max was a little more fortunate when testing night mode.
The higher result of Pro Max “in the night” is really an accident, since the cameras of the younger and older models work in this mode in the same way. In the last article, we have already discussed the so-called “night mode” and the simplicity of obtaining snapshots of this mode from the snapshots of last year’s flagship using the simplest graphics editor. It is likely that the new cameras’ night mode is trying to use stabilization to shoot at slower shutter speeds at lower sensitivity. In theory, this should increase detail, in practice, the difference with the iPhone XS Max camera is barely noticeable even though the XS Max JPEG was processed.
The new addition to the focal length range. 14 mm. we again talked about in the article about the iPhone 11. Apart from the results of the laboratory test given above, there is nothing more to add. At first glance, 70% resolution at 130 lux is not a bad result. However, it’s all about the contrasting world, which the sharpening algorithm handles well. At the same time, the program does not cope with real small details, such as grass and foliage, and we get a mess of low-contrast details even in good lighting. However, for Instagram this quality will be enough.
Gallery iPhone 11 Pro Max (14mm):
But the telemodule remained only in the top versions. Over the past year, it has been thoroughly worked on, and now it is almost 10% better in a lab test than the iPhone XS a year ago. The difference is also visible in field shots: the lens is now noticeably less soapy, and the sensor is less noisy. over, judging by the characteristics, the module has practically not changed: the sensor diagonal is still the same 1 / 3.4 ″, and the aperture has become a little larger. f / 2.0 instead of f / 2.4. Lack of lighting is still critical for the camera, but not so much.
Gallery iPhone 11 Pro Max (52mm):
IPhone XS Max Gallery (52mm):
Since bokeh in portrait mode is created programmatically, the result is practically independent of the focal length. However, over the years, the program has become smarter, and now the result looks really good. This is still synthetic, obvious to any seasoned photographer, but it looks believable on a small screen.
Also note that the front camera now shoots 4K video and 12 megapixel photos.
We tested the iPhone 11 Pro Max. Hereinafter, we will talk about this particular model. However, the iPhone 11 Pro should differ from it only in the battery life and, of course, in the screen size / resolution. Everything else is identical.
So, the appearance of the novelty largely inherits the iPhone XS Max, it is almost impossible to distinguish them from the front. All visual differences are concentrated on the back. First of all, of course, this is a block with cameras. It is located on a transparent glass platform that rises slightly above the level of the main glass. But the cameras themselves protrude a little.
Immediately after the presentation, the Internet was filled with memes that played up their location. The iPhone 11 Pro has not been compared to anything else: with a stove where the cameras are burners, with an electric razor, with the Terminator’s weapon. I must admit that this decision really looks rather extravagant. But on the other hand, this ensures one hundred percent recognition of the model.
The second feature of the Pro is the body materials. The device is made of stainless steel and polished frosted glass. Those who don’t like the slippery surface of the iPhone XS Max should love the new design. Firstly, it is assumed that it is more reliable in terms of holding the smartphone in hand, and secondly, it is simply beautiful. We had a silver version on testing, and in it the back has an almost pearlescent shade.
Apple claims the new case is also more durable. We, of course, did not dare to arrange a crash test for the device for 132 thousand rubles.
The location of the buttons, slots and connectors has not changed at all compared to the XS Max, so we won’t even dwell on that. But what you immediately feel when you take the Pro Max in your hands is that it has become heavier. Maybe not very much, but you can feel it right away.
Is this good or bad? Everyone decides for himself. Many, as you know, love heavier devices. “so that the hand can feel.” Some, on the contrary, prefer light weight and compactness. In general, this is a matter of taste. But we liked it.
Like the iPhone 11, the Pro models run on a new platform. now the Apple A13. The amount of RAM in the iPhone 11 Pro Max, according to Geekbench 5, is 3.65 GB. the same as the iPhone XS Max. There we have ideal conditions for comparing the performance of two SoCs.
Let’s start with the browser benchmarks: SunSpider 1.0.2, Octane Benchmark, Kraken Benchmark and JetStream of the second version. We used the Safari browser on all smartphones. At the same time, iOS on the iPhone XS Max was updated to the current version 13.1.
|104 ms||124 ms|
|49137 points||34019 points|
|611 ms||750 ms|
|129 points||113 points|
The novelty is noticeably faster, and this can be seen in all browser benchmarks. The average growth is 20 percent, but that’s not bad either.
In the complex benchmarks AnTuTu and Geekbench 5, the results are also clear and predictable. In Geekbench, the new product is faster by about 20%.30%. But in AnTuTu, the gap is even wider: almost twice.
The last group of benchmarks is dedicated to GPU performance testing. We used 3DMark, GFXBenchmark Metal, and Basemark Metal, designed specifically for devices with Metal technology.
In GFXBenchmark Metal, all Offscreen tests render images at a fixed resolution, regardless of the actual screen resolution (this makes it convenient to compare devices with different screens).
|40 fps||22 fps|
|27 fps||16 fps|
|58 fps||37 fps|
|75 fps||48 fps|
|48 fps||31 fps|
|63 fps||40 fps|
|56 fps||36 fps|
|59 fps||49 fps|
|100 fps||63 fps|
|60 fps||59 fps|
|157 fps||97 fps|
As you remember, when testing the iPhone 11, we found a lot of oddities in the GFX Benchmark results. Here everything is exactly as it should be. The difference is about one and a half times, and in almost all tests!
The next test is 3DMark. All results are in points.
Not everything went smoothly with 3DMark. Sling Shot didn’t work on both smartphones, API Overhead stuck on XS Max, but at least the comparison in Sling Shot Extreme was successful. And the picture turned out to be very flattering for a novelty.
Finally. Basemark Metal. And here we see a completely similar picture.
|3463 points||2162 points|
Based on the results of all tests, we can conclude that Apple has provided a stable performance gain, which is evident in all benchmarks. Not everywhere it is huge. in most cases we can talk about about 20 percent superiority of the new product in terms of CPU and 40 percent in terms of GPU, but this is a good result. We cannot say that we are amazed, but yes, everything is as it should be in the new generation of iPhone.
The protagonist of Apple’s September presentation was undoubtedly the new iPhone 11 Pro Max. For the first time, three rear cameras are used here, for the first time it is allowed to submerge in water to a depth of four meters, and the name itself is different from previous generations: the Pro prefix was not added to the iPhone before. So how did the flagship go??
We presented and analyzed the general information and all the details voiced by Apple in the report following the September presentation, so we will not repeat ourselves and move on to testing. Let’s just recall the characteristics of the novelty for a start.
Autonomous work and heating
We used the iPhone 11 Pro Max for about a week in normal mode, using it exactly as the main smartphone. The result was the following: he lives for two days, hardly more. We did not notice a fundamental increase in comparison with its predecessor.
The results of tests of autonomous operation in different modes with a screen brightness of 100 cd / m2 are presented in the table.
|22 hours 40 minutes||21 hours 10 minutes|
|11 hours 30 minutes||10 hours 35 minutes|
|4 hours 28 minutes||4 hours 15 minutes|
Well, the new product demonstrates a good result. But there is no radical payoff that would seriously impact the user experience. In addition, in everyday life we use a smartphone differently: no one plays on the iPhone for several hours and does not watch a dozen hours of video. That is, it is not a fact that you will feel the difference.
Another thing is that the fast charging mode really works and allows you to recharge the device by 50% in about half an hour. But to charge the entire iPhone, it will take at least one and a half hours.
Now let’s talk about heating. Below is a thermal image of the rear surface taken after 15 minutes of running the Manhattan 3.1 battery test in the GFX Benchmark Metal:
The heating is localized on the right side of the device, which, apparently, corresponds to the location of the SoC chip. According to the heat chamber, the maximum heating was 45 degrees (at an ambient temperature of 24 degrees). Apple iPhone XS Max has the same heating.
The iPhone 11 Pro Max has a 6.5 ″ OLED screen with a resolution of 2436 × 1125, which gives a decent 458 ppi pixel density. Same options as iPhone XS Max. However, we decided to test the display of the novelty to the fullest extent of our methodology. Alexey Kudryavtsev, editor of the “Monitors” and “Projectors and TV” sections, got down to business.
The front surface of the screen is made in the form of a glass plate with a mirror-smooth surface, resistant to scratches. Judging by the reflection of objects, the anti-glare properties of the screen are slightly better than that of the Google Nexus 7 (2013) (hereinafter simply Nexus 7). For clarity, here is a photo in which a white surface is reflected in the turned off screens (on the left. Nexus 7, on the right. Apple iPhone 11 Pro Max, then they can be distinguished by their size):
The screen of the Apple iPhone 11 Pro Max is slightly darker (brightness in photographs is 107 versus 111 for the Nexus 7). The doubling of reflected objects in the screen of the Apple iPhone 11 Pro Max is very weak, which indicates that there is no air gap between the layers of the screen (more specifically, between the outer glass and the surface of the matrix). Due to the smaller number of boundaries (such as glass / air) with very different refractive indices, such screens look better in conditions of intense ambient light, but their repair in the case of cracked outer glass is much more expensive, since the entire screen has to be changed. On the outer surface of the screen there is a special oleophobic (grease-repellent) coating (effective, better than that of the Nexus 7), so fingerprints are much easier to remove, and appear at a slower speed than in the case of ordinary glass.
With manual brightness control and when displaying a white field in full screen, the maximum long-term brightness value was about 750 cd / m2 (up to 800 cd / m2 in normal mode and up to 1200 cd / m2 in HDR mode), the minimum. 1.9 cd / m2 m². The maximum brightness is very high and, given the excellent anti-glare properties, readability even on a sunny day outdoors will be good. In complete darkness, the brightness can be lowered to a comfortable value. In the presence of automatic brightness control according to the light sensor (it is located above the slot of the front speaker), which is enabled by default. In automatic mode, when the ambient light conditions change, the screen brightness both increases and decreases. The operation of this function depends on the position of the brightness adjustment slider: with it, the user sets the desired brightness level for the current conditions. If nothing is changed, then in complete darkness, the brightness drops to 1.9 cd / m2 (very dark), in an office illuminated with artificial light (about 550 lx), the screen brightness is set to 100-115 cd / m2 (acceptable), in very in bright surroundings (corresponds to illumination on a clear day outdoors, but without direct sunlight. 20,000 lux or a little more) rises to 750 cd / m² (up to the maximum, which is necessary). The result did not quite suit us, so first in the dark, and then in the office, we slightly moved the brightness slider up (in the quick access menu), and for the three conditions indicated above, we got 13, 130 and 750 cd / m² (ideal). It turns out that the automatic brightness control function works adequately, and it is possible to adjust the nature of the brightness change to the user’s requirements. At any brightness level, modulation is present with a frequency of about 240 Hz. The figure below shows the dependence of brightness (vertical axis) on time (horizontal axis) for several brightness settings (approximate values):
It can be seen that at maximum and average brightness, the modulation amplitude is not very large, as a result, there is no visible flicker. However, with a strong decrease in brightness, modulation appears with a large relative amplitude, its presence can already be seen in the test for the presence of a stroboscopic effect or simply with rapid eye movement. Depending on individual sensitivity, such flickering can cause increased fatigue. However, the modulation phase differs across the screen area, so the negative effect of flickering is reduced.
This screen uses a Super AMOLED matrix. an active matrix on organic light-emitting diodes. A full-color image is created using subpixels of three colors. red (R), green (G) and blue (B), but there are half the red and blue subpixels, which can be referred to as RGBG. This is confirmed by a fragment of a micrograph:
For comparison, you can see the gallery of photomicrographs of screens used in mobile technology.
In the fragment above, you can count 4 green subpixels, 2 red (4 halves) and 2 blue (1 whole and 4 quarters), while repeating these fragments, you can lay out the entire screen without gaps and overlaps. For such matrices, Samsung has introduced the name PenTile RGBG. The manufacturer considers the screen resolution for green subpixels, for the other two it will be two times lower.
The screen has excellent viewing angles. True, when deviated even at small angles, the white color acquires a slight bluish tint, but the black color remains simply black at any angle. It is so black that the contrast setting is not applicable in this case. For comparison, we present photographs in which the screens of the Apple iPhone 11 Pro Max and the second participant of the comparison show the same images, while the brightness of the screens was initially set to about 200 cd / m2, and the color balance on the camera was forced to 6500 K.
Note the good uniformity of brightness and color tone of the white field.
The color balance is slightly different, the color saturation is normal. Recall that a photograph cannot serve as a reliable source of information about the quality of color rendition and is provided only for a conditional visual illustration. In particular, the pronounced reddish tint of white and gray fields present in the photographs of the screen of the Apple iPhone 11 Pro Max is visually absent when viewed from a perpendicular view, which is confirmed by hardware tests using a spectrophotometer. The reason is that the spectral sensitivity of the camera matrix does not exactly match this characteristic of human vision.
Now at an angle of approximately 45 degrees to the plane and to the side of the screen. White box:
The brightness at an angle on both screens has noticeably decreased (to avoid strong darkening, the shutter speed is increased compared to previous photos), but in the case of the Apple iPhone 11 Pro Max, the drop in brightness is much less pronounced. As a result, with formally the same brightness, the screen of the Apple iPhone 11 Pro Max visually looks much brighter (in comparison with LCD screens), since you often have to look at the screen of a mobile device at least from a slight angle.
It can be seen that the colors have not changed much on both screens and the brightness of the Apple iPhone 11 Pro Max smartphone is noticeably higher at an angle. The switching of the state of the matrix elements is performed almost instantly, but at the turn-on front there may be a step with a width of about 17 ms (which corresponds to a screen refresh rate of 60 Hz). For example, this is how the dependence of brightness on time looks like when switching from black to white and vice versa:
In some conditions, the presence of such a step can lead to plumes trailing behind moving objects. However, dynamic scenes in films on OLED screens are distinguished by high definition and even some “jerky” movements.
The gamma curve, plotted using 32 points at equal intervals in terms of the numerical value of the shade of gray, showed no blockage in either the highlights or the shadows. The exponent of the approximating power function is 2.20, which is equal to the standard value of 2.2. At the same time, the real gamma curve deviates very little from the power dependence:
Such spectra are typical for OLEDs. the components are well separated, which allows achieving a wide color gamut. However, in this case, the gamut is neatly adjusted to the sRGB borders. As a result, visually the colors have natural saturation.
This applies to images that have an sRGB profile or no profile at all. However, native to modern top-end Apple devices is the Display P3 color space with slightly richer greens and reds. Display P3 is based on SMPTE DCI-P3 but has a D65 white point and a gamma curve of approximately 2.2. In addition, the manufacturer claims that since iOS 9.3 color management is supported at the system level, which makes it easier for iOS applications to correctly display images with a prescribed color profile. Indeed, adding the Display P3 profile to the test images (JPG and PNG files), we got a wider color gamut than sRGB (output in Safari):
Note that the coordinates of the primary colors almost exactly coincided with those prescribed for the DCI-P3 standard. Let’s look at the spectra in the case of test images with the Display P3 profile:
It can be seen that in this case there is a slight cross-mixing of components in the red area, that is, the color space native to the Apple iPhone 11 Pro Max screen is slightly wider than Display P3.
The grayscale balance is very good, as the color temperature is close to the standard 6500 K, and the deviation from Spectra of absolute black body (ΔE) is less than 10, which is considered acceptable for a consumer device. At the same time, the color temperature and ΔE vary little from shade to shade. this has a positive effect on the visual assessment of the color balance. (The darkest areas of the gray scale can be ignored, since the color balance there is not very important, and the error in measuring color characteristics at low brightness is large.)
This Apple device has a Night Shift function that makes the picture warmer at night (how much warmer. the user indicates). For a description of why this might be useful, see the iPad Pro 9.7 ″ article. In any case, when having fun with a tablet or smartphone at night, it is better to lower the screen brightness to a minimum, but still comfortable level, and there is no point in turning the screen yellow with the Night Shift setting.
There is a True Tone function, which, if enabled, adjusts the color balance to the environmental conditions.
For example, we activated it and placed the tablet under LED lights with cool white light, resulting in values of 2.1 for ΔE and 6800 K for color temperature. Under a halogen incandescent lamp (warm light). 3.2 and 4900 K, respectively, that is, the color temperature has become lower. The function works as expected. Note that the current standard is to calibrate display devices to a white point of 6500 K, but in principle, correction for the color temperature of external light can be useful if you want to achieve a better match of the image on the screen with what is seen on paper (or on any medium. on which colors are formed by the reflection of incident light) in the current conditions.
According to the criterion for outputting frames, the quality of video playback on the screen of the device itself is very good, since frames (or groups of frames) can be output with a more or less uniform alternation of intervals and without frame drops up to 4K files and 60 fps. When playing video files with a resolution of 1920 by 1080 (1080p) on a smartphone screen, the image of the video file itself is displayed exactly at the height of the screen (in landscape orientation). The clarity of the picture is high, but not perfect, since there is no escape from interpolation to the screen resolution. The brightness range displayed on the screen corresponds to the actual for this video file, except that in the shadows a couple of shades merge with black. Note that this smartphone has support for hardware decoding of H.265 files with a color depth of 10 bits per color, while displaying gradients on the screen is carried out with much better quality than in the case of 8-bit files. Display of HDR files is also supported: colors are saturated, the number of gradations is not reduced.
Let’s summarize. The screen has a very high maximum brightness and has excellent anti-reflective properties, so the device can be used outdoors without any problems, even on a sunny summer day. In complete darkness, the brightness can be lowered to a comfortable value. It is permissible to use the mode with automatic brightness adjustment, which works adequately. The advantages of the screen also include an effective oleophobic coating, support for sRGB color gamut (with the participation of the OS) and a very good color balance. At the same time, let’s recall the general advantages of OLED screens: true black color (if nothing is reflected in the screen), noticeably less than that of an LCD, the drop in image brightness when viewed from an angle. The disadvantages include the modulation of the screen brightness, which appears at low brightness. Users who are particularly sensitive to flicker may experience increased fatigue due to this. However, the overall screen quality is very high.
Specifications Apple iPhone 11 Pro Max
And here is the traditional comparison of the characteristics of new items with other Apple smartphones.
|5.8 ″, OLED, 2436 × 1125, 458 ppi / 6.5 ″, OLED, 2688 × 1242, 458 ppi||5.8 ″, OLED, 2436 × 1125, 458 ppi / 6.5 ″, OLED, 2688 × 1242, 458 ppi||6.1 ″, IPS, 1792 × 828, 326 ppi|
|SoC Apple A13 Bionic, 6 cores 3rd generation Neural Engine||SoC Apple A12 Bionic, 6 cores 2nd generation Neural Engine||SoC Apple A13 Bionic, 6 cores 3rd generation Neural Engine|
|64/256/512 GB||64/256/512 GB||64/128/256 GB|
|Gigabit LTE, Wi-Fi 802.11ax (Wi-Fi 6)||LTE Advanced, Wi-Fi 802.11ac||Gigabit LTE, Wi-Fi 802.11ax (Wi-Fi 6)|
|3 modules of 12 megapixels (video. 4K 60 fps): standard, telephoto and wide-angle (120 degrees)||2 modules of 12 megapixels (video. 4K 60 fps): standard and with a telephoto lens||2 modules of 12 megapixels (video. 4K 60 fps): standard and wide-angle (120 degrees)|
|12MP (4K 60fps video), enhanced FaceID||7 MP (video. Full HD), FaceID face recognition||12 MP (video. 4K 60 fps), FaceID face recognition|
|IP68 (enhanced protection against water and dust)||IP68 (enhanced protection against water and dust)||IP68 (enhanced protection against water and dust)|
|iPhone 11 Pro Max up to 5 hours longer than iPhone XS Max / iPhone 11 Pro up to 4 hours longer than iPhone XS||–||up to 1 hour longer than iPhone XR|
|there is||not||there is|
|144 × 71 × 8.1 / 158 × 78 × 8.1||144 × 71 × 7.7 / 157 × 77 × 7.7||151 × 76 × 8.3|
As a result of the presentation, we analyzed all the details of the characteristics, so now we will proceed directly to testing.
How to see the percentage of battery charge on iPhone 12, iPhone 12 Pro, iPhone 11, iPhone 11 Pro, iPhone XS, iPhone XR, iPhone X from Control Center
Touch your finger to the right “ear” at the top of the screen, where the battery indicator is located.
Swipe down to bring up Control Center.
An icon will appear in the upper right corner indicating the battery charge as a percentage.
Swipe up the screen to close Control Center.
Of course, this method takes some time, unlike other iPhones, where the percentages are always visible on the screen.
Despite the absence of the corresponding option in the “Settings”, you can still find out how much charge remains in percentage.
How to see iPhone 12, iPhone 12 Pro, iPhone 11, iPhone 11 Pro, iPhone XS, iPhone XR, iPhone X Battery Percentage on Home Screen
Press and hold your finger on an empty spot on the iPhone home screen.
Click on the appeared button “” in the upper left corner.
Scroll to the bottom of the widget screen and select Batteries.
Select the type of widget display and click Add widget.
Move the widget to the desired location on the screen and tap Done in the upper right corner of the home screen to apply the settings.
Battery level on iPhone 12, 12 Pro, 11, 11 Pro, XS, XR, X as a percentage: how to turn it on. 3 ways
It is very easy to find out the battery charge level on all old iPhone models, just go to “Settings” → “Battery” and enable the “Charge percentage” option.
How to find out the percentage of battery charge on iPhone 12, iPhone 12 Pro, iPhone 11, iPhone 11 Pro, iPhone XS, iPhone XR, iPhone X using Siri
Call your personal assistant Siri and say, for example, “How much charge does the iPhone have?”, After which you will receive an answer as a percentage of the charge of the iPhone.
Is it possible to turn on battery percentage on iPhone 12, iPhone 12 Pro, iPhone 11, iPhone 11 Pro, iPhone XS, iPhone XR, iPhone X on all screens?
Unfortunately, no. the “ears” in the iPhone equipped with a Face ID scanner do not leave room for displaying percentages. Many other arguments can be given, but this will not change the fact that people are used to always seeing the battery level as a percentage on their screen, at least optionally. The lack of such an opportunity causes discomfort for many iPhone owners.