iOS video conferencing applications
Using iPhone as a webcam for a computer requires the installation of the corresponding application on the smartphone. It is worth running this program and checking its performance, as well as the corresponding program (links below) on a Windows or Mac computer. Sometimes you can do without a computer at all. In this case, you need to use the usual instant messenger applications.
If you want to use your webcam to make Skype calls, chat with colleagues on Zoom or Slack, or just chat with friends via WhatsApp or Viber, try downloading the appropriate iPhone app. These apps are specially designed for mobile devices, so they work great on a small screen.
If you want to use speakerphone with your iPhone, then you will need to purchase an inexpensive tripod. There are quite a few smartphone tripod mounts on the market that allow you to conveniently place any video equipment you have. Almost everything you need will allow you to carry out a high-quality spider tripod, which you can install on almost any surface.
The main disadvantage of this arrangement is that you will be dependent on the iPhone’s microphone and speaker. Wireless headphones are the best way to deal with this problem. The sound quality will be quite good, and it will be much easier for you to deal with the microphone so close to your face.
Of course, sometimes you have to work at the computer. In this case, there is little that can replace a separate webcam. Fortunately, the iPhone does a good job of playing the role of an alternative.
How to use iPhone as a webcam for your computer
Using an iPhone as a webcam will require a dedicated application to be installed on both your phone and your computer. Unfortunately, the iPhone does not support this feature out of the box, so you need third-party software to implement it.
We tested several apps and read reviews on them. As a result, two options can be distinguished: EpocCam (for iPhone, iPad, Windows and Mac) and iVCam (for iPhone, iPad and Windows). Both products can be attributed to the premium class with numerous free options, you are given the opportunity to try out the functionality of the program before purchasing it. Windows 7, 8 and 10 versions are supported.
In addition to versions for Mac and PC, EpocCam also offers three versions of the application for the iPhone. The free version has limitations, the high-resolution version costs 749 rubles. The free version is limited to a camera resolution of 640×480 pixels and watermarks over the camera image.
iVCam works almost identically, but only a Windows version is available. The iPhone app and accompanying software are free to download. The free version of iVCam supports HD resolution, but also contains a watermark over the video stream. To remove this picture, you will have to pay 749 rubles using an in-app purchase.
Both of these apps allow you to use both wireless and USB connections. You can choose from front or rear cameras, use different lenses, and even turn on the flash on your device to better illuminate the scene. If you decide that you like a particular application and want to unlock the full version, then both options are relatively inexpensive (599 rubles and 749 rubles) relative to the average quality of webcams.
In addition, there is an application called iCam (379 rubles). Unfortunately, you will not be able to test it before purchasing. The program is also based on UPnP for wireless connection, which may not work with all routers. Another solution is NDI | HX Camera, a free app for video producers. However, this program may seem daunting to most users.
Whichever application you choose, you need to leave it running and open on the iPhone screen, which will act as a webcam. After installing the app and setting up your iPhone, you will need to go to the video conferencing app settings on your computer, where you need to select the virtual webcam as the video source device.
How to use iPhone as a webcam for your computer
A good webcam can be quite expensive, and it may simply not be at hand at the right time. And the camera quality of such a device is likely to be worse than that of your iPhone. Why not use your smartphone as a webcam for video communication? And it’s really easy to do.
Tips for Using iPhone as a Webcam on Computer
A wired connection will always be better than a wireless one. If you want the most reliable webcam solution, turn off wireless and select USB. Both apps we have selected support USB connectivity. If you are not walking around the house while chatting, using Wi-Fi in this case does not make much sense.
If you want to use your iPhone as a webcam, you’ll also need a stationary positioning method. The best solution is a smartphone tripod or an existing standard tripod.
The aforementioned universal spider tripods are perfect for this because you can mount them almost anywhere.
If you already have a tripod, but only a smartphone mount is missing, pay attention to this option.
Both apps allow you to use a rear view camera, which you should definitely use. Not only can you use a flash when needed, but the iPhone cameras on the back are vastly superior to the selfie camera.
You can use EpocCam and iVCam to capture audio as well, but that would not be the best idea. Headphones are a nice accessory, but a quality desktop microphone will sound 10x better. We advise you to adjust the lighting (even with a table lamp) before the call to make sure that your face does not appear too dark (in detail).
Using your iPhone as a webcam will drain your battery. If you are not using a USB connection (which also charges your phone while chatting), make sure to plug your smartphone into a power outlet.
Epocam, an app to turn your iPhone into a webcam
Compatible with both iOS and Android, Epocam. perfect app to convert your mobile device to a webcam. It can be very easily connected via Wi-Fi to a Windows or macOS computer for streaming in one of the many compatible apps.
The first thing to do is to have your iPhone connected to the same WI-FI network as your computer. The USB cable connection also works if there is a case when you are not in a room with Wi-Fi and only over a local network. After connecting both teams, you should download the drivers, which we will find on the official developer site. They are available for both macOS and Windows Thus, the iPhone can communicate with these two operating systems without any problems. These drivers open and work in a very simple and fast way with very little weight.
With the drivers already installed, you just need to go to the App Store and install the EpocCam app, which will allow you to have all the camcorder controls on your iPhone.
Once you run the application, we will see how the instructions are given. But if you have the drivers installed, it will instantly track a compatible device nearby and start displaying the camera image. You only need to configure in the app that you want to use this camera as if it were a traditional connected camera. There are many applications compatible with this service, such as Skype, OBS, Zoom, among others. This is why there will be no problem and the usage is really simple, as when you execute it, the broadcast will start and you can always switch between the front and rear cameras.
Why it is recommended to use iPhone as a webcam?
It’s a reality that a Mac camera isn’t all that great. Sometimes you need to realize that a device as expensive as a Mac doesn’t have a decent video conferencing camera. It can also happen that the camera on Mac and even on PC is broken or missing. This is why the iPhone itself can be used as a webcam.
Whether you have a Mac or Windows PC, you can use your mobile phone or webcam to offer us much more quality in all aspects. The ability to use the phone’s own flash, and obviously the quality it offers for photography, we will have to do with video conferencing. The problem will be that while we are using a mobile phone as a webcam, the rest of the functions cannot be used. But it can be worth it if we need a webcam and we don’t have one on our PC, or if we want better quality than what the Mac offers.
How to use iPhone as a webcam on Mac and Windows PC
Videoconferencing meetings are becoming more common. If you don’t have a webcam, this can be a problem, but on an iPhone, you always have a more than decent camera that can become a webcam. In this article, we will discuss how to do this easily through the app.
Benefits of the pro version
In the free version, you will have all these basic functions. But if you want to go a little further and have 1080p quality, you have to pay for a subscription to open up the range of possibilities. In addition to providing higher quality, the board allows manual selection of the connection type, audio support, and use of the flashlight in the dark.
Autofocus and the ability to switch between the lenses of the main camera. this is something incredibly interesting. Obviously, this update is worth doing if you’re going to make heavy use of the webcam feature. If it is for a certain moment, it makes no sense to make this type of payment, since we will not use it.
use iphone as WEB-camera
Mobile-review. com Dual-SIM HTC Desire V Review | | russian | Phone Search: size = ”1 ″ brand name Acer Alcatel AnyDATA Asus Benefon BenQ Bird Bosch DAEWOO Eastcom Eishi Enol Ericsson Eten Fly Fly Bird Garmin Haier Handspring Hitachi HTC Huawei Hyundai Hyundai Electronics I-mate I-node Imt Innostream Kenwood Kyocera LG Magcom Maxon Miracle MiTAc Mitsubishi Mobiado Motorola MTS NEC Neonode Neopoint Newgen Nextel Nokia Nortel O2 Okwap Orange Panasonic Pantech Pantech-Curitel PCEphone Philips Possio Qool Qtek Qualcomm Rolsen Rover Sagem Samsung Sanyo Sendo Sensei Sharp Siemens Sony Sony Ericsson Ubtec Soutecu Spectonronics Symbian Teleponga Telit Telit Telme VK Voxtel Vtech Xircom RSS Editorials News Samsung Galaxy Note.
First Look Today, large companies, especially corporate giants like Samsung, do not surprise users with extraordinary products
Sony ST21i Tapioca Microsoft Windows Phone 7: Reasons for Failure First Look at Samsung Galaxy S3 as a 2012 Flagship Reviews Editorials Mobile Phones Editorials MP3 Forum Advertise About us Print this article Dual-SIM HTC Desire V Review Live photos of HTC Desire V Contents: In the box Design materials Build quality Dimensions Controls Screen Camera Battery life Performance Connectivity Dual SIM operation Navigation Software Sound Conclusion In the box: Handset Wired stereo earphones (with flat cable and phone call control button) Charger USB-microUSB cable Brief manuals On the one hand. the new HTC’s One smartphone line looked intriguing when it was announced, and it suggested optimistic feelings about the company’s future.
And HTC is really trying to make something.
Probably, the Desire V represents exactly this kind of an attempt in a new market segment, as this is not only their first dual-SIM handset ever, but also one of the few middle-end dual-SIM smartphones on the market, while all the dual-SIM handsets available today belong to the low-end sector.
Design materials The design of the HTC Desire V is easily recognizable.
The handset resembles other models by HTC due to the slightly curved lower part of its body, to its gradually rounded corners, and some other design details that can be found in a lot of HTC products.
I liked the handset appearance: it looks ascetic and business-like, but it’s not boring though, so I can’t say the design is dull or drab.
In Russia, only black model is available now. Probably, the white version is coming later.
The black handset is made of soft-touch plastic.
It’s comfortable to hold it in the hand; the handset doesn’t slip out and feels fairly nice to the touch.
The frame around the screen is made of black metal, while the camera eyelet is embedded into a rim and located on a small platform made of grooved plastic.
The handset body is not too easily soiled, although if you peer at it closely enough, some traces and worn spots become visible at certain angles.
Back to the table of contents Build quality I don’t know whether it was my bad luck or the handset’s specific design feature, but the battery cover in the sample I tested, which occupies the entire backside of the handset, didn’t cling tightly enough to the rest of the body.
Judged by eye, the gap between the body and the cover is less than a millimeter, but if you press the cover, some crackling can be heard.
I can’t say this is a serious downside, but on the other hand, my sample showed it right after the cover had been removed and placed back for the first time, so no one can say what it will look like after 6 or 12 months of usage, if the brand new handset already has this “specific” feature.
There are no other complaints about the build or design quality.
Back to the table of contents Dimensions The Desire V resembles other middle-end HTC models with its dimensions.
It fits comfortably in the hand during phone conversations and when you operate the device.
It’s not too heavy, and you can put it practically in any kind of
HTC Desire V. 118.5 x 62.3 x 9.3 mm, 114 g HTC Desire C. 107.2 x 60.6 x 12.3 mm, 100 g HTC Wildfire S. 101 x 59 x 12 mm, 108 g Apple iPhone 4S. 115.2 x 58.6 x 9.3 mm, 140 g Back to the table of contents Controls The smartphone runs Android 4.0, so all the controls are made in accordance with the requirements of the operating system.
Like in the other HTC models running the same OS, we have only three buttons under the screen instead of four (as before): Back, Home and Recent Apps.
The touch buttons are quite distanced from each other, while their marks are simple and clear.
There is white illumination that turns on when you operate the smartphone in the dark.
Every time you touch the buttons, the handset produces a hardly noticeable vibration.
It was stronger in the HTC models released last year, but now it is weaker, which is quite an unpleasant trend.
In some Android 4.0 applications, a software button is used to open the menu, but some other applications don’t have it, so you have to hold the Recent Apps button for a couple of seconds to open the menu.
The right side of the smartphone accommodates the volume control button; it’s quite comfortable and easy to press it without looking at it. On the left side we have the microUSB jack.
The power button is in the center of the top side of the handset; the 3.5-mm audio jack is nearby.
Holding the power button launches a menu that allows turning the handset off, switching it to the flight mode, or rebooting the device.
At the top of the front side, we find the voice speaker; the light and proximity sensors are nearby.
It is red when the battery is being charged or when the handset is connected to a PC; it blinks green if you have missed calls, unread text or email messages.
At the top of the backside, we see the eyelet of a 5-megapixel camera; a nicely designed grid of the ringing speaker and the Beats Audio logo are at the bottom.
The memory card slot and the SIM card slots are under the battery cover.
The slot for the main SIM card is to the left of the camera module (underneath it); the one for the additional SIM card (marked) is to the right.
And the microSD slot is a little higher.
Back to the table of contents Screen The HTC Desire V features a capacitive Super-LCD screen with a diagonal of 4 ″ and resolution of 800 x 480 pixels (WVGA).
The specifications of this screen are absolutely the same as those of the screen in the HTC Incredible S: for instance, the screen ensures maximum viewing angles and natural color reproduction (as far as I can judge).
The screen is capable of rendering up to 16 million colors and supports 4 touches at a time.
It is covered with the protective Gorilla Glass: it is scratch resistant and if you take scissors and run them across the screen surface without pressing too hard, you won’t notice any traces of it. But still, after some period of usage some small scratches and worn spots may appear.
It’s pretty comfortable to control the screen with fingers, as the surface provides excellent sliding.
The screen remains more or less readable in the sun, but under direct sunlight it gets totally unreadable though.
In general, as for a middle-end smartphone, the screen of the HTC Desire V is surprisingly good.
Of course, it represents the previous generation used in the flagship model released last year, but the screen still produces a pretty high picture quality.
Back to the table of contents Camera The smartphone sports a 5 MP camera with auto FOCUS and LED flash.
The interface of the camera application is exactly the same as in the HTC One X and One S models, so the screenshots below are the ones taken for the One S. The maximum picture resolution is 2,592 x 1,552 pixels (in the widescreen mode).
You can also select the resolution for the 4: 3 side ratio.
There are settings for white balance, ISO, exposure, contrast, sharpness, and saturation.
You can apply special effects to your pictures.
The maximum video resolution is 800 x 480 pixels.
Effects are also available for videos, as well as white balance, exposure, contrast, saturation, and sharpness settings.
When recording a video, you can zoom in and out and change the point of FOCUS manually.
There is neither tracking auto FOCUS nor the opportunity to take pictures when shooting a video.
You can judge about the picture and video quality by the samples below.
As for me, the camera of the HTC Desire V is not bad, but not more than that.
Sample video (MP4, 10 MB) Back to the table of contents Battery life The handset uses a 1,650-mAh Li-Ion battery.
During the test, the battery was capable of lasting for a day at the following daily usage conditions: 2 to 3 hours of listening to music, 10 to 20 text messages, Gmail account with the Push-mail function on, 10 to 20 camera shots. reviewing and accounts from time to time, and about an hour of talking on the phone.
The smartphone has two SIM cards, both being active simultaneously.
However, without any special efforts, I was able to exhaust the battery within half a day by listening to music for 4 or 5 hours, by surfing the web all the time, posting various stuff to Instagram and. and replying to emails.
Hence, if you start to use the fully charged device at 9 in the morning, constantly handling the smartphone this or that way for about half of that half-a-day time, the battery level will get down to 10% by 4 or 5 p. m. Anyway, for a dual-SIM smartphone, a whole day of more or less active use seems quite good to me, especially if you remember that the handset has a good large screen and a fine interface, the latter being not too fast though
Back to the table of contents Performance The smartphone is built on the Qualcomm MSM7227A platform and has a 1-GHz CPU. The handset has 512 MB of RAM and 4 GB of internal storage for user data.
Before describing the performance of the smartphone, I suggest you should take a look at the results produced by some benchmarks: Basemark ES 2.0 Taiji Power Board Vellamo KFS Nenamark Smartbench 2012 AnTuTu To put it briefly, the smartphone is not very fast.
When the most ordinary tasks like opening a performing menu, launching the email application or opening contacts, the handset may lag or hang for some time.
Actually, it often takes the handset about a second to respond to a tap. If you have a lot of applications running, the performance becomes too poor, so you have to reboot the smartphone to make it work in an acceptable way. Removing the active applications from the memory by using the Task Manager doesn’t help at all. The poor performance is what disappointed me most about this handset.
But when you buy it, you always expect comfortable operation of all of its features, and your general impressions may get spoilt by the smartphone lagging and working just not so fast.
Here I would also like to say that if you switch to the HTC Desire V from some really low-end smartphones, even those running Android, most likely you won’t notice how slowly it works.
But if you had a flagship before, even one of an earlier generation, or the iPhone or a Windows Phone device, the interface lags will certainly be too obvious.
Back to the table of contents Connectivity The smartphone operates in the GSM (850/900/1800/1900) and UMTS (900/2100) networks and supports the two high-speed data transfer standards: EDGE and HSDPA.
You can turn the connection modules on and off using the menu settings or one of the tabs on the system panel falling down from the top of the screen, or through the widgets.
There is a special widget presenting a line of icons for controlling the connections, as well as individual widgets and the standard Android one. The HSDPA data transfer protocol is only supported by the main SIM card installed into the first slot.
The second SIM card only provides EDGE connection.
To synchronize the handset with a PC and for data transfer you have to use the bundled microUSB cable.
The USB interface is 2.0. When connected to a computer, there appears a menu where you can select one of the five connection options: charging only, Drive (the internal memory is visible), HTC Sync, Modem (for using the handset as a modem for internet access), and connection to a PC providing access to the Internet from the handset via the computer.
The handset features an in-built Bluetooth 3.0 module supporting A2DP and EDR, as well as all other major profiles.
Wi-Fi (802.11b / g / n). There are no complaints about the operation of the Wi-Fi module.
The settings allow adjusting the rules of switching to sleep mode, using a static IP only, and adding security certificates.
Use Your Phone as a Webcam | iPhone, Mac, PC (2020)
There is also a special mode for the maximum performance of the Wi-Fi connection.
With Wi-Fi on, the handset practically doesn’t get warm.
The HTC Desire V has a feature of sharing 2G / 3G internet connection via Wi-Fi. It works as follows.
You go to the wireless connections menu and enable the Wi-Fi Router option, which opens the settings menu.
Then you select the network name, password and connection type (WEP, WPA, WPA2).
Besides, you can set the maximum number of allowed connections to your handset, or you can allow or ban every new connection individually.
Back to the table of contents Dual SIM operation What I liked about this device right from the start is the elegant and convenient way the dual SIM support is implemented.
I can’t say I’m a very experienced user of dual-SIM mobile phones, but still, comparing to the few devices I have ever used, the dual SIM support at the user interface level provided in the HTC Desire V is the best and the most convenient implementation.
You can set the main and the additional SIM card and provide a name of up to 4 characters for each of them.
It’s not too long, but in various menus those names will be shown fully, without any contractions.
In the dialer window, you can see two buttons showing the names of the SIM cards instead of the ordinary Dial key. After you have found the necessary phone number in your phonebook using the SmartDial function, all you have to do is tap on it and then press the SIM card button you want to use, so there is no need to hold buttons or use any pop- up menus.
In the call log, every phone call is marked with the SIM card number, which is also very helpful.
In the list of received messages, you can also see which of the SIM cards was used.
In the window for sending text messages, you have two Send buttons instead of one: they show the SIM card names and you make your selection by simply tapping on one of them.
In the phone call settings, you can set an individual ringtone for each of the SIM cards or select the common ringtone for both of them, but you can’t select different notification sounds for the two SIM cards.
The major downside of this handset as a phone supporting dual SIM operation is that it has only one radio module.
It means that when you are making a call using one of the SIM cards, the other one gets automatically disconnected, so no one will be able to call you to its number at the time.
Back to the table of contents Navigation The smartphone uses a Qualcomm gpsOne chip.
Finding the satellites takes 10 to 15 seconds.
For the navigation the handset uses the standard Google applications: Google Maps and Google Navigation, as well as the НТС Locations application based on Route 66. Google Maps allow building routes and finding addresses by street or location names.
Google Navigation provides route tracking and voice hints.
The HTC Navigation software is launched with the help of the Locations application.
It is a full-blown navigation application supporting points of interest (POI), route log and route building.
The handset is supplied with a general map of Russia and a demo version of the map for the Russian cities with a 30-day trail period.
You can buy any maps available for this software directly from the application interface, paying with your plastic card (VISA, Master Card, American Express, Diners Club).
Besides, you can also buy maps online at the developer’s website, and then you will have to enter a special voucher code in your handset and download the maps you have paid for. The good thing is that you can select one of the available license versions: 30 days, one year, or unlimited.
Back to the table of contents Software The smartphone runs Android 4.0.3 and features the HTC Sense 4.0 interface extension.
The interface looks the same as in the more expensive models, but still some functions are curtailed.
For example, some of the widgets available in the One Series handsets are absent (why HTC decided to remove almost all clock widgets seems unclear).
Besides, you can’t call the matrix of the desktops to quickly switch between them.
The weather application doesn’t have HTC’s usual animation.
There are a few even more annoying restrictions introduced for some absolutely uncertain reasons.
For example, in the more expensive models with Sense, the user has the opportunity to switch to the music player right from the lock screen by simply dragging the window with the album cover to the lock ring or, on the contrary, by dragging the lock ring to the music player window.
The Sense version of the HTC Desire V doesn’t allow that.
First, I thought it was conditioned by the complicated animation and by the manufacturer’s wish to minimize the interface load or something like that.
However, in the Desire V you can switch to a missed call or an unread message by dragging the notification through the center of the screen to the lock ring.
Although the animation and the general mechanics of all those three operations. quick switching to messages, calls and music from the lock screen. are absolutely the same.
The interface itself, as usual, is beautiful and enjoyable, at least if we leave the lagging aside.
The Recent Apps button calls up miniatures of the recent application Windows instead of their screenshots, so the switching system resembles the one used in the tablet version of Android 3.0. The set of available applications is standard for HTC: news reader, Adobe Reader. trial version of Polaris Office, and a free version of SoundHound.
And here, a few more words about the sound.
Back to the table of contents Sound The smartphone is decorated with the Beats Audio nameplate, while the package contains nice-looking but simple earphones with a flat cable.
I’ve tested the sound quality in comparison with that of the HTC One X that I had at hand at the moment, using a Chinese earphone set, the Awei es900i, bought in Hong Kong at some 5-7, that ensures surprisingly good sound (as some connoisseurs say). With the Beats Audio effect turned off, the sound produced by the HTC Desire V is clear but flat and inexpressive.
I liked the sound of the HTC One X, also with the improvers turned off, much better: the sound is much deeper and has more volume.
When the Beats Audio is on, the sound became slightly different, but I can’t say if it’s better or worse.
Hence, the general thought I’m trying to express is that the One X sounds far better than the Desire V, regardless of the fact that the Beats Audio logo is also present on the body of the latter.
Back to the table of contents Conclusion The handset works quite well with the mobile network, although during the two-week period of my testing it, there had been a few similar occasions when one of the SIM cards lost its signal without any reasons, while the other one was still showing the best reception possible.
The mobile operator was the same and the SIM cards were nearly of the same age. The voice reproduction quality is not bad; the voice speaker loudness is slightly above the average level, but without any reserve.
The ringing speaker is loud, so almost in every situation I set the volume to 60% or 70%, and that was enough for me. The vibration alert level is moderate.
The smartphone is already available on the shelves.
The large retailers sell it at about 490. There are no unofficial supplies yet, as the sales are only at the starting point.
On the one hand, if the HTC Desire V had appeared a month earlier, we could say it had no quality alternatives.
The majority of dual-SIM Android smartphones have either a lower-end screen (the diagonal and resolution are lower) or a simpler design and build quality, or both.
The device looks simpler and more ordinary than the HTC Desire V, and the body materials are not so attractive (regular patterned plastic).
But it also features a 4-inch screen with the resolution of 800 x 480 pixels, though with an obviously lower quality (color reproduction and viewing angles) than the one in the HTC model.
It doesn’t have the HTC Sense interface and runs Android 2.3. these are disadvantages too. But in the rest the both smartphones look quite similar: 1-GHz CPU, 512 MB of RAM, a microSD slot, and a 5 MP camera.
Certainly, if you need a really beautiful Android smartphone that wouldn’t look cheap but would support dual SIM operation and feature a nice design and a good build quality, then the HTC Desire V is beyond the competition.
However, you should remember that you will have to overpay quite a lot for this exterior (design) and interior (software) beauty.
Actually, you will pay twice as much as for any other device with similar technical specifications offered by other manufacturers.
Specifications: Type: smartphone Form factor: candybar Materials: matt plastic, metallic frame Operating system: Android 4.0.3, proprietary HTC Sense 4.0 interface Network: GSM / EDGE 850/900/1800/1900 MHz, UMTS / HSDPA 900/2100 Dual SIM operation: alternating in talking mode (single radio module) CPU: 1 GHz, Qualcomm MSM7227A platform RAM: 512 MB Internal storage: 4 GB, microSD card slot Connectivity: Wi-Fi (b / g / n /), Bluetooth 3.0 ( A2DP), microUSB (USB 2.0) for charging and synchronizing, 3.5-mm audio jack Screen: capacitive, S-LCD, 4 ″, 800 x 480 pixels (WVGA), automatic brightness level Camera: 5 MP, autoFOCUS, WVGA (800 x 480 pixels) video recording, flash (flashlight) Navigation: GPS, Qualcomm platform gpsOne chip (A-GPS support) Miscellaneous: accelerometer, light sensor, proximity sensor, FM radio Battery: removable, Li-Ion, 1650 mAh Dimensions: 118.5 x 62.3 x 9.3 mm Weight: 114 g Do you want to talk about this?
Please, go to our Forum and let your opinion to be known to the author and everybody else.
Back to the table of contents Artem Lutfullin (artem @ mobile-review.
com) Translated by Serge Gomelsky (s_gomelsky @ mail.
ru) Published ?? 24 July 2012 Tweet Have something to add ?! Write us… eldar @ mobile-review.
com News: [31-07 16:21] Sir Jony Ive: Apple Isn’t In It For The Money [31-07 13:34] Video: Nokia Designer Interviews [31-07 13:10] RIM To Layoff 3,000 Employees [30-07 20:59] Video: iPhone 5 Housing Shown Off [30-07 19:12] Android Fortunes Decline In US [25-07 16:18] Why Apple Is Suing Samsung?
[25-07 15:53] A Few Choice Quotes About Apple
By Samsung [23-07 20:25] Russian iOS Hacker Calls It A Day [23-07 17:40] Video: It’s Still Not Out, But Galaxy Note 10.1 Gets An Ad [19-07 19:10] Another Loss For Nokia: 1 Billion Down In Q2 [19-07 17:22] British Judge Orders Apple To Run Ads Saying Samsung Did Not Copy Them [19-07 16:57] iPhone 5 To Feature Nano-SIM Cards [18-07 14: 20] What The iPad Could Have Looked Like
[18-07 13:25] App Store Hack Is Still Going Strong Despite Apple’s Best Efforts [13-07 12:34] Infographic: The (Hypothetical) Sale Of RIM [13-07 11:10] Video: iPhone Hacker Makes In.App Purchases Free [12-07 19:50] iPhone 5 Images Leak Again [12-07 17:51] Android Takes 50% Of US And Europe [11-07 16:02] Apple Involved In 60% Of Patent Suits [ 11-07 13:14] Video: Kindle Fire Gets A Jelly Bean Subscribe Register | Lost password?
Using iPhone as a webcam on Mac
First you need to download the EpocCam application (App Store) on your iPhone.
On your Mac, go to kinoni.com and download the application drivers for macOS. After that, install the downloaded files on the Mac. Drivers allow you to select EpocCam as default camera in Skype and Zoom.
Now download the EpocCam Viewer (Mac App Store) on your Mac.
Open the EpocCam app on your iPhone and you will see a blank screen asking you to connect your Mac to the same Wi-Fi network or with a USB cable.
Use a USB cable to connect your iPhone to Mac, or just connect both devices to the same Wi-Fi network.
You will see the image from the smartphone camera in the EpocCam Viewer on Mac.
After installing the EpocCam drivers, you will be able to select the program as the default camera for Skype and Zoom. For example, you can open Skype, go to the audio and video settings and select EpocCam as your default camera.
The EpocCam program and application are free. There is also a version for Windows. It allows you to use both the main and front camera of the device, but there is a resolution limitation of 640 x 480.
There is a paid version of EpocCam for a computer that will upscale video to 1080p HD, allow you to use the iPhone microphone, remove ads and watermarks.
How to use iPhone as a webcam for PC and Mac
The coronavirus pandemic has forced millions of people to work from home. Many have switched to video conferencing software such as Zoom, Microsoft Teams, and Skype for workshops. Because of this, many began to buy themselves good webcams. Even MacBooks have poor cameras. Fortunately, the iPhone can be used as a webcam.
Firstly, the setup process is very simple, and secondly, the camera on the iPhone is much better than on most laptops. Below, we’ll show you how to use your iPhone as a webcam for PC and Mac.
Even if you have a MacBook with a camera, it is better to use an iPhone for video calls. The video quality will be much better. There are several applications that allow you to do this, but we will tell you about EpocCam. The application is simple and convenient.
How to use an iPhone instead of a webcam on a Windows PC
EpocCam works with Windows too, but the free version is limited. IVCam supports HD video and has a nicer interface.
Download the iVCam application (App Store) for iPhone.
Download iVCam software on your Windows PC (download).
Install the program on your computer and then connect your iPhone and PC to the same Wi-Fi network.
Open the app on the iPhone and the program on the computer. They will sync automatically and you will see the video from the iPhone camera on the PC.
over, iVCam has effects, it is possible to take screenshots and record video, as well as support for flash. You can upscale video quality up to 1920 x 1080 at 60 fps. And yes, it’s all in the free version. Paid only removes ads and watermarks.
iVCam works great with Skype and Zoom, it can also be selected as the default camera through the settings.
For even more convenient communication, use your smartphone stand.
It is worth noting that using the iPhone as a camera quickly consumes battery power, so it’s best to plug it into a power source right away.
What to do if your iPhone doesn’t act as a webcam
If you don’t see iPhone videos on your computer, there might be an issue with iPhone limitations. If necessary, you can check and change these restrictions on your iPhone as follows.
Allow apps to use your iPhone’s camera
You need to enable the option on your iPhone, if you haven’t already, to allow installed apps to use your camera.
- Launch the Settings app, scroll down and tap on Privacy.
- Select Camera on the next screen to change camera settings.
- Turn the switch for webcam applications to ON. This will allow these apps to use your iPhone‘s camera.
Allow apps to use your iPhone’s microphone
If you can’t hear your iPhone sound on your computer, make sure your webcam apps allow you to use the microphone.
- Open the Settings app on your iPhone and click on Privacy.
- Click “Microphone” to view the applications that can use your microphone.
- Turn on the toggle for webcam apps so they can use the iPhone microphone.
Use your iPhone as a webcam on Mac
If you’re a Mac user, you have an app called EpocCam that lets you use your iPhone as a webcam for your car. The free version of the application supports video resolutions up to 640 x 480 pixels and works over both wired and wireless (WI-FI) connections.
In addition, in the free version, you will have a watermark and some advertisements. If you’re okay, you can set up the app as follows and start using your iPhone as a webcam for video calls.
- Launch the iOS App Store on your iPhone, search for EpocCam, and install it.
- On your Mac, open your browser and go to the Kinoni website.
- Scroll down and click the button that says Download MacOS Drivers. You need these drivers to use your iPhone as a webcam on your Mac.
- Extract the downloaded archive by double clicking the archive file. Then double click the extracted package file to start installation.
- Go through the setup wizard and click Install to install the webcam drivers on your Mac.
- Enter your account password and click Install Software to install the package on your Mac.
- Connect your iPhone to the same Wi-Fi network as your Mac, or use a USB cable to connect iPhone to Mac.
- Launch the EpocCam app on your iPhone.
- Click Launchpad on your Mac, search for FaceTime and open it.
- You will see live footage of your iPhone’s camera on your screen.
Use your iPhone as a webcam on Windows
The ability to use the iPhone as a webcam is not limited to the Mac. If you are a Windows user, you have an application called iVCam to stream your iPhone’s camera content to your Windows computer.
Like a Mac, you need to install the tool and app on your iPhone to start using your phone as a webcam on your computer.
- Open a browser on your computer, go to iVCam and download the iVCam software to your computer.
- Install the iVCam software and restart your computer when it is fully installed.
- Open the iOS App Store on your iPhone, search for iVCam and install it.
- Launch iVCam app on iPhone and Windows computer.
- Accept the invitation by pressing OK on your iPhone. This will allow the app to use your iPhone’s camera.
- You will immediately see live footage of your iPhone’s camera on your computer.
- IVCam has features such as the ability to take screenshots and record videos from your iPhone. You can use the icons in the application toolbar on your computer to access these functions.
- The iPhone app has features such as turning the flashlight on and off, changing the camera angle, and switching cameras. You can click the X icon if you want to stop streaming video to your PC.
How to use your iPhone as a webcam on PC / Mac
If you have an iPhone, you don’t need to buy a webcam to make video calls from your Windows and Mac computers. There are ways to turn your iOS device into a webcam that allows you to see the contents of your iPhone‘s camera on your computer screen.
These apps, which allow you to use your iPhone as a webcam, are free but limited in functionality. You can always upgrade to the paid professional versions and access all the features they have to offer.
How to set your iPhone as the default webcam in various applications
If you want to use your iPhone as the Primary webcam on your computer, you will want to set your phone as the default webcam in your video calling apps.
Shown below is how to set iPhone as the default webcam in various video calling apps on Mac. The steps for this procedure should be the same for Windows.
Setting your iPhone as the default webcam in Skype
- Launch Skype on your computer.
- Click the Skype menu at the top and select “Settings”.
- Select Audio & Video in the sidebar on the left.
- In the right pane, select the Camera drop-down menu and select your webcam application from the list.
- Scroll down and click the Microphone dropdown to select the webcam application as the microphone for your computer.
- Click Make a free test call at the bottom to make sure the camera and microphone are working.
Using iPhone as default webcam zoomed in
- Launch Zoom on your computer.
- Click Zoom at the top and select Preferences.
- Click the Videos tab on the left sidebar.
- Select your webcam application from the Camera drop-down menu.
- Click Audio on the left sidebar.
- Click the Microphone drop-down menu and select your webcam application from the list.
Using iPhone as your default FaceTime camera
- Open the FaceTime app on your Mac.
- Click the “Video” menu at the top and select your webcam application under “Camera”.
Did you know you could use your iPhone as a webcam to record yourself on your computer? This saves you time spent recording video with your camera and transferring the video to your computer.
How to use your smartphone as a webcam: 3 ways to help
Even if the PC is without a webcam, there is no need to purchase one. Alternative. having a smartphone.
Enough Internet access, USB-cable and a couple of minutes of your time don’t miss basic life hacks.
Connecting your smartphone as a webcam to macOS
The principle of pairing iOS devices is approximately the same as in devices on Android. The difference is in the applications and the number of steps to complete the connection. Let’s consider in more detail.
Setting up and connecting a smartphone to a computer
How to use your smartphone as a webcam? Take advantage of:
Download the DroidCam Wireless Webcam application to a mobile phone, for a computer. DroidCam client (you can download it from the official website https://www.dev47apps.com/droidcam/Windows/). On a smart phone, activate the “USB Debugging” mode (in the settings, select the “For Developers” item).
On the computer in the program, select the icon that resembles a cable. Confirm the inclusion of “Video” and “Audio” by ticks, press “Start”.
Use the program for smartphone and PC as with the cable version.
You will need to activate Wi-Fi on your mobile, mark the appropriate icon in the PC program. In the Device IP line, insert the address that is displayed on the main screen of the smart in the application.
Check the boxes next to “Video” and “Audio” and confirm the activation with the “Start” button.
Device pairing platforms
Take the IP Webcam app, for example. After uploading to Android, the settings screen will open at the bottom of the application, where you need to confirm the launch.
After that, the address will be displayed on the smartphone screen (this is the required camera access). It must be entered in the browser line on a PC that is connected to the same network as the mobile phone. As a result, a page should open in a browser on a PC (see the first photo below).
In the menu on the page, go to the item about drivers for chats and click on “IP Camera Adapter”. Download and install the driver on your PC (use the link at https://ip-webcam.appspot.com/). Run the driver and enter the IP address from the mobile. Be sure to write video at the end of the line, for example, http://192.343.1.555:1225/video, and click on “Ok”.
After that, on a laptop, you can open a platform that supports video broadcasting, for example, Skype (select MJPEG Camera in the camera settings), and use your phone as a basis.
Applications to download and install on your smartphone and computer
EpocCam (also suitable for Android smartphones)
Presents a minimum of functions, you can use any iPhone camera. You will need to download the application to your phone and PC (client program). The connection is automatic.
iVCam. no need to use an IP address to pair PC and gadget
Everything happens automatically. It is possible to select the screen orientation, frame rate and resolution. As with the first program, you need to install 2 applications: on macOS and a phone.
iCam. video broadcast can be recorded in the cloud
No PC installation software required. The brightness and contrast of the video are adjustable, there is a flash. Viewing images, videos is carried out through the browser.
Connecting your smartphone as a webcam to Windows
This process depends on the method of connecting the devices and the applications used for this. How the phone is connected as a webcam for a computer. read the material.
Setting up and connecting a smartphone to a computer
Choose one of the methods that suits you.
You will need the iVCam program. Download it for iPhone and MacBook (iVCam client). After launching the application on iPhone, select the ability to transfer sound in the settings. The program may request access to the camera and the Internet connection, which will need to be confirmed. After starting the program on the PC, make sure that both gadgets are connected to the same network.
The first step is to connect the cable from the iPhone to the computer. Unlike Android devices, the iPhone does not need to enable debug mode. Next, install the same applications for PC and mobile as in the case of a Wi-Fi connection. The start-up steps are the same as in the first option.
For example, EpocCam. Download it to your phone, and on the MacBook install the webcam drivers (you can download it here https://www.eLGato.com/en/epoccam, applications are also available for Windows and Android users).
- connect Wi-Fi, making sure that the same network is offered for both gadgets;
- open an iPhone application suitable for video streaming;
- in the camera settings select the name EpocCam.
A notification will appear on the laptop screen that the camera is connected via Wi-Fi.
As you can see, there is no difficulty in connecting your phone to your computer as a webcam. Decide which connection method suits you best and make video calls from your PC.
Important! For everything to work wirelessly, your smartphone and computer must be connected to the same network / router. over, a PC can be connected via cable, and a smartphone via Wi-Fi. everything will work.
Install the application on your phone or tablet, and install a special program on your computer using the links above.
Launch the application on your smartphone, the main window will display the IP address and port. they must be entered in the program on the computer. In the app, you can choose which camera you want to use. rear or front.
Interesting! Also, the device can be used as a network camera, when it will simply transmit video in real time. To do this, just enter the address in any browser from the application. IP Cam Access.
Now, in any communication program or in the same browser, just select. DroidCam Source as the signal source. All videos will be streamed immediately.
DroidCam. how to use your phone as a WEB camera on Android
One of the best free Android apps that allows you to use your smartphone or tablet as a WEB camera on your computer or laptop. Easy to operate and configure, this is what most users choose.
For everything to work, you just need to install the application on your smartphone / tablet and put a special program on your computer. Setup does not take much time, the camera will work in the future when connected via a USB cable or Wi-Fi connection, which is very convenient.
- Free and in Russian
- High-quality video and sound
- Easy setup and management
- Allows you to configure your smartphone as a WEB-camera as soon as possible
- Works on WI-FI and USB
- The application does not block other programs, they can also be used
- There is a noise suppression function
Setup. via USB
In order for the camera to work via cable, you first need to enable developer mode on the phone and activate the USB debugging function there.
Open the smartphone settings, go to the “System” section and then “About phone”, here click 7 times in a row on the build number until a message appears that the corresponding mode is activated.
Return to the “System” section and open the “For Developers” subsection. Activate the “USB Debugging” function here.
Connect the smartphone to the computer and specify the USB connection type in the Windows program. click on the corresponding icon. Next, check if the audio and video items are ticked.
The signal will immediately be transmitted and your device will work like a webcam. On some models of Android devices, when you turn off and turn on the device, the debugging function is disabled and you need to start it again.
How to use your phone as a WEB-camera: instruction
It is quite easy to use your phone as a WEB-camera on your computer or laptop, it is convenient if you do not want to buy a separate device.
This can be done using special applications and programs for Android and IOS. So, after downloading and installing them, in a couple of minutes your smartphone will work like a webcam.
In the previous article, we examined the causes and solutions to the problem why the phone does not see the memory card. Now we will analyze in detail and with explanatory pictures how to use the phone as a WEB-camera via USB and WI-FI.
Interesting! Let’s consider how to do this on smartphones and tablets Android and iPhone, both via USB connection and WI-FI wireless connection.
IVCam. how to make a WEB camera from your phone on iPhone
A quality iPhone solution with many possibilities. The program is very easy to use, it is quickly configured and allows you to choose any image quality you like. Works absolutely free and is fully translated into Russian.
For everything to work, the devices must be connected to the same network / router. Install the application on your iPhone and the program on your computer, and launch them. They will immediately see each other, and the picture with sound will already begin to be transmitted without any additional action. Everything here is as simple as possible. Opening the settings, you can set the quality of the transmitted video, resolution and frame rate.
- Free and in Russian
- Simple controls
- Quick setup
- Selecting video resolution
- Choosing the video quality
- Choosing FPS, if the iPhone supports 60 frames, then you can put 60
- Virtually no latency over Wi-Fi even with low quality and resolution
- Video recording function
It is quite easy to use your phone as a WEB-camera. The whole setup together with the installation does not take more than two minutes in time and it is convenient.
IPhone apps like webcams
When connected to a USB port on your Mac on your iPhone, it will not immediately perform the function you specified. To do this, you have to install an application.
Let’s consider the functions of this application, the rules of use and introduce several alternatives.
EpocCam is perfect for iPhone, iPad, as well as Windows and Mac. A multifunctional application with many free options, and it is also in demand among the rest. Belongs to the premium class.
You can use many functions in your work, such as front and rear cameras, the presence of a flash for good light and quality, as well as the use of different objects.
Free version pros and cons
EpocCam Free provides users with both a free demo version and a paid full-featured release of the application. The free version has USB connectivity, front and rear cameras, and Wi-Fi connectivity. The video resolution is 640 × 480. But the free version has watermarks and ads in the application.
How to turn iPhone into a webcam for Mac?
Did you know that the iPhone camera can completely replace your webcam? Yes, it is, and it is quite simple to do it. Typically, a webcam with excellent functionality comes with a high price tag. Many have an old camera at hand, which is of very poor quality, it is usually extremely out of date in work. And then the conclusion: why not use a smartphone for this need? After all, it is very convenient and not difficult at all.
In order to use a phone instead of a webcam, you need to install special applications, respectively.
Paid version and its benefits
The Pro version will provide you with more convenience. For example, no watermarks or ads. Also, an important advantage of the Pro version is the increased video resolution, which jumps from 640 × 480 to 1,920 × 1,080. Most functions are available to users of the Apple desktop operating system.
The advantages of the professional version of the application are:
- manual focus;
- flashlight support;
- dual camera as well as dim screen;
- HDR video;
The application of your choice will have to be started and not closed, this is necessary in order for it to serve as your camera. After installing and enabling the desired features in the iPhone settings, you need to go to the configuration of the video conferencing application itself on the Mac. Choose a virtual webcam as a video source device.
Tips and rules for using your iPhone camera as a camera on Mac
To use your phone as a camera, for convenience, as well as a better and clearer picture, you will need to fix it in a stationary state. The best solution to this problem is a tripod.
Simple and quick use of iPhone as a webcam
Developers from Apple offer to make video calls on iPhone, iPad or iPod Touch in different ways. using standard tools like FaceTime, and third-party clients of social networks and instant messengers (Skype, Viber and dozens of other options). But what about situations when a smartphone, tablet or player is not enough for the full transfer of information? When is it still important to additionally display the screen during communication or launch broadcasts through corporate platforms to which access from mobile technology is prohibited? Of course, use a computer with a webcam. Well, if such an accessory is not at hand, then immediately use the iPhone as a webcam
The innovative and technical tool iVCam, which is ahead of the competition both in terms of available functions and due to a small number of errors (for example, Cam has thousands of problems with sound, and also a paid limitation on the transmission of a color picture, will help to deal with the set). if you don’t pay, you will have to communicate in black and white).
How to install and configure iVCam
Turning an iPhone, iPad or iPod Touch into a webcam is possible in the following scenario:
Go to the App Store from a smartphone, tablet or player, and using the search, find iVCam;
After preparing the mobile equipment. return to the computer;
First of all, you will have to follow the link to the main site of the tool and, without changing the language in the upper right corner to “English” (you will have to look at the Chinese characters, but redirecting to the page of another tool MyCam will not work, which, although it is similar in function, but partially lags behind point of view of design and convenience), find an image of a smartphone and a laptop and click on the link that is located under the familiar words “Win7 / 8/10” and start downloading;
Logically, the search for the desired distribution could be simplified by using a link to the cloud storage, but due to the extraordinary activity of developers and the frequent change of stable versions, it is better to agree with the official website;
After the download is complete, the distribution will have to start and, following the installer’s prompts, complete the unpacking and mandatory preparation (no surprises. select a directory, put a checkmark in front of the items with autorun and shortcuts, and press the “Next” button a couple of times);
The installation is completed with a trial run of iVCam, which immediately begins to search for a suitable device that can become a webcam;
So, all that remains is to launch iVCam on an iPhone, iPad or iPod Touch and connect to the same wireless Wi-Fi point to which the PC is connected or distributed;
The way to turn a smartphone, tablet or player into a webcam is possible in other ways. through WebCamera, iCam or Cam, but, as practice shows, no one can compare with iVCam, even from paid copies. The settings are too complex for competitors and unpredictable functionality with a bunch of restrictions.