How to wake up your brother printer

The fix instructions in this resource include faulty connection cables, printer settings, paper and cartridge problems, and printer software updates. When, for this reason, the network device is idle or often goes offline, then you should additionally pay attention to the update of the operating system and the SNMP protocol.

Poll Options are limited because JavaScript is disabled in your browser.

    Network printer problem

    We figured out the local option, but what to do if the network printer is offline. It will take a number of additional steps to restore it to work. And if the connection is made through another PC, then you need to perform manipulations on it, and not on your “PC”.

    Open “Printer Properties” in advance.

    wake, brother, printer

    Out of consumables

    Some printer models are configured in such a way that they can go offline when ink or toner in their consumables begins to run out. Remember when you made the last refueling and how many sheets were printed after that. Compare the figure obtained with the resource of your cartridge. If the difference is small, then most likely the ink supply should be updated.

    Instructions on how to properly refill the printer cartridge yourself.

    Print queue hung

    If you send a lot of documents to the printer, and even a large one, then a print queue is likely to form. It is prone to accumulation and freezing, which is fraught with the transition of the printer to an offline state and could happen to yours. Now the user is faced with the task of clearing it. The easiest and fastest way to do this is through the printer properties. According to the instructions above, go to the drop-down menu and select “Clear print queue”.

    Solved: Printer won’t wake up. HP Support Community

    Welcome to the HP Support Community!

    Updating the printer’s firmware and manually assigning an IP address to the printer may resolve this issue. Let’s try these steps:

    Update the printer firmware

    Click here to download and install the latest firmware from your computer.

    Click here. to learn about the different methods for updating printer firmware.

    On the printer control panel display, swipe left and select Settings. Click on “Settings” and turn off auto shutdown.

    If the problem is not resolved, go to the next step.

    Assign an IP address to the printer manually

    Obtain the IP address of the printer. To obtain an IP address, touch the wireless icon on the printer control panel.

    Enter the IP address at the top of the web browser to get the printer EWS page on your computer.

    Click on the “Network” tab. Are common. select “Network Protocols”. select Enable IPv4 Only (or similar). Apply settings.

    Go to “Network Settings” “Ethernet / Wireless Settings” “Advanced Settings” “IP Settings” “Select an IP Address Manually”.

    You will be prompted to enter IP address, default gateway, subnet mask, preferred and alternate DNS

    As an IP, say if your printer’s IP is 192.168.0.3, try assigning a different IP that is slightly out of range, like 192.168.0.88

    Enter the default gateway and subnet mask values ​​obtained from the network configuration page.

    For preferred DNS use 8.8.8.8 and alternate DNS as 8.8.8.4

    To watch a video on how to manually assign an IP, click here

    If you think my post resolved your problem, click “Accept as a solution” to help others find a solution. Click “Kudos / Thumbs Up” in the lower right corner to say “Thank you” for your help!

    KUMAR0307
    I’m an HP employee

    Driver needs to be updated

    A printer driver is special software that allows it to print text documents, pictures, and photographs. They should be updated periodically. This is one of the reasons why drivers can become the culprit for the autonomous operation of the device.

    Possible damage to files by malicious files or due to unskilled user actions cannot be ruled out. Updating the software to the latest version will help to solve both variants of the malfunction. To do this, start the device manager of a personal computer or laptop with the command “devmgmt.msc” in the “Run” snap-in window (press the WindowsR keys simultaneously).

    In the list that opens, find your printer, and right-click to open its menu. In it select “Update Drivers”.

    In the next window, first try to make an automatic update, and if it fails, then use the manual method. To use it, you first need to download the package of the necessary files from the software repository on the website of the manufacturer of the printing equipment or from our database using the “direct” link.

    Disable the “auto power off” mode through the menu

    • Press “Menu”.
    • Press the “up arrow” or “down arrow” so that the “General” appears on the screen. settings “.
    • Click “OK”.
    • Press “up arrow” or “down arrow” so that “Ecology” appears on the screen.
    • Click “OK”.
    • Press the “up arrow” or “down arrow” so that the “Waiting time” appears on the screen.
    • Click “OK”.
    • While the sleep time is displayed on the screen, simultaneously press the “Down Arrow” and “Stop / Exit”.
    • Using the “up arrow” or “down arrow”, disable deep sleep.
    • Click “OK” to save.

    For models with a touch screen, there should be a similar sequence of actions.

    Trying to reinstall / update drivers

    If the device does not come readily available when sending non-printing, then you can try to reinstall the drivers. A newer (latest) or even a later version of the driver should be selected.

    It will not be superfluous to try to select a different type of driver, for example: PCL5, PCL6 or UPD.

    READ  Printer Writes Paper Jam What To Do

    Disable the “auto power off” mode through the menu

    • Press “Menu”.
    • Press the “up arrow” or “down arrow” so that the “General” appears on the screen. settings “.
    • Click “OK”.
    • Press “up arrow” or “down arrow” so that “Ecology” appears on the screen.
    • Click “OK”.
    • Press the “up arrow” or “down arrow” so that “Auto power off” appears on the screen.
    • Click “OK”.
    • Press “up arrow” or “down arrow” so that “Disabled” appears on the screen.
    • Click “OK”.
    • To exit the menu settings, press “Stop / Exit”.

    For models with a touchscreen display, there should be a similar sequence of actions.

    Using a different USB cable

    If you are using a long cable, then it is worth trying to connect using a cable up to 3 meters or even just another cable.

    In custody

    If none of the methods worked for you or you found a new one, please leave a comment below. So that other users can use your information.

    You may also be interested in:

    A fairly common problem with Brother machines is that they turn off after a while. they go into a deep sleep. After going to sleep, in Windows the printer is marked as “disabled”.

    Disable the “auto power off” mode through the menu

    • Press “Menu”.
    • Press the “up arrow” or “down arrow” so that “General” appears on the screen. settings “.
    • Click “OK”.
    • Press “up arrow” or “down arrow” so that “Ecology” appears on the screen.
    • Click “OK”.
    • Press the “up arrow” or “down arrow” so that the “Waiting time” appears on the screen.
    • Click “OK”.
    • While the sleep time is displayed on the screen, simultaneously press “Stop / Exit” and “Start”.
    • Using the “up arrow” or “down arrow”, disable deep sleep.
    • Click “OK” to save.

    For models with a touch screen, there should be a similar sequence of actions.

    Turn off your printer brother

    A fairly common problem with Brother machines is that they turn off after a while. they go into a deep sleep. After going to sleep, in Windows the printer is marked as “disabled”.

    Trying to reinstall / update drivers

    If the device does not come readily available when sending non-printing, then you can try to reinstall the drivers. A newer (latest) or even a later version of the driver should be selected.

    It will not be superfluous to try to select a different type of driver, for example: PCL5, PCL6 or UPD.

    It is certainly a good thing that the manufacturer of printing equipment is concerned about the environment and implements energy-saving modes in its devices. But this technology also has its drawbacks.

    When receiving data, the device should go from sleep mode to ready mode, but this often does not happen. None of the indicators, such as “Ready”, are blinking, and in addition, the error “Failed to print the document” may appear.

    After the printer has gone into “deep sleep”, you have to press the “ON” button for the printer to seal. Therefore, when sending to print, the printer often refuses to wake up on its own at the call of the computer.

    Searching for this function in the driver settings often does not bring any result. It remains to deal with the device itself.

    Next, I will provide several solutions to the problem so that the printer does not go into deep sleep. Different devices work with different shutdown methods.

    In most cases, the problem is related to the settings of the device itself.

    Turn off your printer brother

    A fairly common problem with Brother machines is that they turn off after a while. they go into a deep sleep. After going to sleep, in Windows the printer is marked as “disabled”.

    Enabling / Disabling Toner Save Mode

    You can configure Toner Save mode using the product control panel or the printer driver. Default setting Off

    You can save toner by setting the Toner Save Mode to On. Note that if the Toner Save Mode is set to On, your prints will look lighter. We do not recommend using the toner save feature when printing color photos or grayscale images.

    Setting from the device control panel
    If your Brother machine has a touchscreen display, follow the instructions “For touchscreen models”.

    • Press Menu.
    • Press or to select General Setup and press OK.
    • Use the arrows or to select Ecology and press OK.
    • Use or to select Economy. toner and press OK.
    • Press or to select On. or Off. and click OK.
    • Press Stop / Exit.
    • Press Menu on the touchscreen.
    • Use the arrows or to select General. nast-ki. Click General Settings.
    • Use the arrows or to select Ecology. Click Ecology.
    • Click Economy. toner.
    • Click Off. or On
    • Press Stop / Exit.

    Setting in the printer driver
    NOTE: The illustrations below are of the typical machine and operating system and may differ from your Brother model and your operating system.

    • Open Print Preferences. (Click here for how to open Print Preferences.)
    • Select the Advanced tab.
    • Select or clear the Toner Save Mode check box. Click Apply = OK.
    • Open Print Preferences. (Click here for how to open Print Preferences.)
    • Click Advanced
    • Select On. (On) or Off. (Off) for Toner Save under Printer Features and click OK.
    • Open the Print window. (Click here to learn how to open the Print window.)
    • Select Print Settings from the drop-down menu and click the Basic tab.
    • Check or uncheck the Toner Save Mode checkbox.
    • Open the Print window. (Click here to learn how to open the Print window.)
    • Select Printer Features from the drop-down menu and select General 1 (Set 1 for Mac OS X 10.4) in the Feature Sets field.
    • Check or uncheck the Toner Save box.
    • Homepage
    • Russia
    • DCP-7055R
    • Frequently asked questions and troubleshooting
    • Printing
    • Print Settings / Print Management
    • faq00000020_008
    • Date: 03.24.2011
    • Number: faq00000020_008
    • Printing
    • Email
    READ  How To Print Without Wire On A Printer

    In custody

    If none of the methods worked for you or you found a new one, please leave a comment below. So that other users can use your information.

    You may also be interested in:

    • Homepage
    • Russia
    • DCP-7055R
    • Frequently asked questions and troubleshooting
    • Printing
    • Print Settings / Print Management
    • faq00000020_008
    • Date: 03.24.2011
    • Number: faq00000020_008
    • Printing
    • Email

    Disable the “auto power off” mode through the menu

    • Press “Menu”.
    • Press the “up arrow” or “down arrow” so that the “General” appears on the screen. settings “.
    • Click “OK”.
    • Press “up arrow” or “down arrow” so that “Ecology” appears on the screen.
    • Click “OK”.
    • Press the “up arrow” or “down arrow” so that the “Waiting time” appears on the screen.
    • Click “OK”.
    • While the sleep time is displayed on the screen, simultaneously press “Stop / Exit” and “Start”.
    • Using the “up arrow” or “down arrow”, disable deep sleep.
    • Click “OK” to save.

    For models with a touchscreen display, there should be a similar sequence of actions.

    Disable the “auto power off” mode through the menu

    • Press “Menu”.
    • Press the “up arrow” or “down arrow” so that the “General” appears on the screen. settings “.
    • Click “OK”.
    • Press “up arrow” or “down arrow” so that “Ecology” appears on the screen.
    • Click “OK”.
    • Press the “up arrow” or “down arrow” so that “Auto power off” appears on the screen.
    • Click “OK”.
    • Press “up arrow” or “down arrow” so that “Disabled” appears on the screen.
    • Click “OK”.
    • To exit the menu settings, press “Stop / Exit”.

    For models with a touchscreen display, there should be a similar sequence of actions.

    Disable the “auto power off” mode through the menu

    • Press “Menu”.
    • Press the “up arrow” or “down arrow” so that the “General” appears on the screen. settings “.
    • Click “OK”.
    • Press “up arrow” or “down arrow” so that “Ecology” appears on the screen.
    • Click “OK”.
    • Press the “up arrow” or “down arrow” so that the “Waiting time” appears on the screen.
    • Click “OK”.
    • While the sleep time is displayed on the screen, simultaneously press the “Down Arrow” and “Stop / Exit”.
    • Using the “up arrow” or “down arrow”, disable deep sleep.
    • Click “OK” to save.

    For models with a touchscreen display, there should be a similar sequence of actions.

    Option 2: Set the default printer

    You may need to manually specify the default printer settings. Follow these steps to resolve this issue for Windows 10. Before starting, make sure you have downloaded and installed all updates for the Windows 10 operating system.

    For Windows 10 users

    • Use the search box or ask Cortana to open Devices
    • Select Printers & Scanners
    • Make sure the next to “Let Windows manage my default printer” is unchecked. If necessary, click a field to deselect it
    • Select your printer from the list provided
    • If your printer is listed multiple times, select the version that shows a standby or online
    • Click Manage
    • Click Set as default

    For Windows 8 users

    Select your printer from the devices shown. If there is more than one version, select the version that is not greyed out. Right click and select “Set as default printer”.

    Now try printing again. If your device still appears offline, skip to the next section.

    Doesn’t see paper

    The printer uses a sensor to detect the presence of paper in the tray. If the device is old or is used intensively enough, then such a “spare part” could well fail. It will be necessary to contact the service center in your city without fail.

    It will not be superfluous to check that there are enough sheets visually and their correct placement in the tray. Load more, if necessary. Try any other paper manufacturer’s product. Compare the types that the printer can handle, listed in its specifications, with the data on the sheet box. Type, format, thickness and weight must match.

    How to take a printer offline

    These instructions solve several problems. If the problem is resolved, don’t feel like you have to follow all the steps. However, it is best to do them in that order, because the simplest fixes are listed first and require a minimum of effort and technical knowledge.

    Basic troubleshooting sequence

    Check all cable connections between the printer and the network router or computer, depending on the method used to connect to the printer. Make sure none of the cables are disconnected and the printer is turned on.

    Check the printer tray for paper jams. Make sure there is enough paper in the printer and it is correctly aligned in the printer. If you see a “Low Ink” message on the printer, replace the empty cartridges.

    Click the Apple menu and select Software Update to install all available updates.

    Click the Apple menu and choose Restart from the drop-down menu.

    Click “System Preferences” in the Dock and select “Print & Scan.” “Double-click your printer in the list of printers if the yellow light next to the printer name turns on. Click “Resume”.

    Open the document you want to print and try to print the document by pressing Ctrl-P. Select your printer by clicking the Change button and select your printer from the list. Click “Print”.

    Option 4. Check the connection

    Depending on how your printer is connected to your device, you could have any number of reasons why the printer is still not working. If you are using a USB cable to connect, make sure it is securely attached. If the problem persists, consider using a different USB cable.

    READ  How to connect to a printer from an iPhone

    If you are using a wireless network to connect to the printer, follow these steps:

    • Restart the printer by turning it off, wait 10 seconds and unplugging the power cord from the printer
    • Then shut down your computer
    • Connect the printer power cord to the printer and turn the printer back on
    • Disconnect the power cord from the wireless router
    • Wait 10 seconds before plugging it back in
    • To restore access to the Internet on
    • it may take a few minutes When this happens, turn on the computer.
    • Use the HP Wireless Setup Wizard or HP Smart software to connect the printer to the network.
    • Print a wireless network report to see what connection issues are still there.
    • Find this report online. the wireless settings or menus of your printer

    If the problem persists, it may be the job of the router manufacturer or network administrator. Connection problems can be difficult to diagnose beyond these steps, so contact a technician if you are still unable to connect the printer to the network.

    Disable deep sleep (auto power off) on Brother machines

    A fairly common problem with Brother machines is that they turn off after a while. go into deep sleep. After going to sleep, in Windows the printer is marked as “disabled”.

    Disable the “auto power off” mode through the menu

    • Press “Menu”.
    • Press the “up arrow” or “down arrow” so that the “General” appears on the screen. settings “.
    • Click “OK”.
    • Press “up arrow” or “down arrow” so that “Ecology” appears on the screen.
    • Click “OK”.
    • Press the “up arrow” or “down arrow” so that “Auto power off” appears on the screen.
    • Click “OK”.
    • Press “up arrow” or “down arrow” so that “Disabled” appears on the screen.
    • Click “OK”.
    • To exit the menu settings, press “Stop / Exit”.

    For models with a touchscreen display, there should be a similar sequence of actions.

    Disable the “auto power off” mode through the menu

    • Press “Menu”.
    • Press the “up arrow” or “down arrow” so that the “General” appears on the screen. settings “.
    • Click “OK”.
    • Press “up arrow” or “down arrow” so that “Ecology” appears on the screen.
    • Click “OK”.
    • Press the “up arrow” or “down arrow” so that the “Waiting time” appears on the screen.
    • Click “OK”.
    • While the sleep time is displayed on the screen, simultaneously press the “Down Arrow” and “Stop / Exit”.
    • Using the “up arrow” or “down arrow”, disable deep sleep.
    • Click “OK” to save.

    For models with a touchscreen display, there should be a similar sequence of actions.

    It is certainly a good thing that the manufacturer of printing equipment is concerned about the environment and implements energy-saving modes in its devices. But this technology also has its drawbacks.

    When receiving data, the device should go from sleep mode to ready mode, but this often does not happen. None of the indicators, such as “Ready”, are blinking, and in addition, the error “Failed to print the document” may appear.

    After the printer has gone into “deep sleep”, you have to press the “ON” button for the printer to seal. Therefore, when sending to print, the printer often refuses to wake up on its own at the call of the computer.

    Searching for this function in the driver settings often does not bring any result. It remains to deal with the device itself.

    Next, I will provide several solutions to the problem so that the printer does not go into deep sleep. Different devices work with different shutdown methods.

    In most cases, the problem is related to the settings of the device itself.

    Using a different USB cable

    If you are using a long cable, then it is worth trying to connect using a cable up to 3 meters or even just another cable.

    Trying to reinstall / update drivers

    It will not be superfluous to try to select a different type of driver, for example: PCL5, PCL6 or UPD.

    Disable the “auto power off” mode through the menu

    • Press “Menu”.
    • Press the “up arrow” or “down arrow” so that the “General” appears on the screen. settings “.
    • Click “OK”.
    • Press “up arrow” or “down arrow” so that “Ecology” appears on the screen.
    • Click “OK”.
    • Press the “up arrow” or “down arrow” so that the “Waiting time” appears on the screen.
    • Click “OK”.
    • While the sleep time is displayed on the screen, simultaneously press “Stop / Exit” and “Start”.
    • Using the “up arrow” or “down arrow”, disable deep sleep.
    • Click “OK” to save.

    For models with a touchscreen display, there should be a similar sequence of actions.