HP laserjet p1102 printer won’t install

If the device works with Windows XP, Vista, Windows 7, 8

If you are having problems with an HP printer that interacts with Windows XP, Vista, Windows 7, or Windows 8, you can use the HP Print and Scan Doctor, developed by Hewlett Packard device manufacturers. It was created to support users of HP devices (for printing, scanning).

You can also check why your printer is not printing by checking the configuration of the print drivers. That is, if by default you have one device installed, and you use several, you need to check each time that the configurations of the access point and the device match.

If the printer does not print, check the correctness of a functioning application. If you cannot print a document from the specified program, you need to check the correctness of its work. To do this, try sending a document to print from another program. For example, after typing a few lines in Notepad, try to print them. If the operation went without problems, then the original application is not working correctly.

Printer crashes can occur due to insufficient virtual memory. In order to print a specified document, the HP LaserJet p1102 printer pre-processes it in a virtual area on a PC. If this area is not enough (not less than the declared 200 MB), the printer will produce blank sheets of paper. In order for the printer to start printing again, you can increase this volume through the OS settings (for each of them the procedure may be different).

If your machine is running Mac OS X 10.6, OS X 10.7 Lion, OS X10.8 Mountain Lion

If the printer does not print with Mac OS X 10.6, OS X 10.7 Lion, OS X 10.8 Mountain Lion, you also need to rule out connection problems, problems with the USB cable, check if the “print queue” function is disabled.

To return the printer to work, you can delete and resume the device in the printer list. To do this, the Apple sign opens and through it the user enters the “Print Settings” section. Having found the section “Print and Fax”, through it we enter “Printers” and select “Your printer” (HP LaserJet p1102). After removing the device (“-“), disconnect it from the PC and restart the latter. Then you need to go through the same scheme and connect the device again by clicking “”. Try to print the page again.

laserjet, p1102, printer, install

What to do if the HP laserjet p1102 printer does not print?

Any of the peripheral devices that make it easier to perform many printing tasks can fail, which can lead to a decrease in the quality of the processed documents. And if your HP LaserJet P1102 printer stops printing or prints faintly, there are a series of steps you can take to help you troubleshoot.

Some device models from the same manufacturer (for example, HP LaserJet 1018, HP LaserJet 1020, HP LaserJet 1022, HP LaserJet p1102) may show the same errors. Why this happens can be explained by the similarity of printing technologies. However, it will be necessary to solve the problem in each individual case on an individual basis.

How to reinstall the driver?

After eliminating hardware problems (unstable voltage on the line, blinking of light indicators, error message, etc.), it is worth trying to reinstall the driver.

You will be able to pay 30-50% less for light, depending on what kind of electrical appliances you use.

If the HP LaserJet p1102 printer used to work and now does not print, you should find a new driver, download it to your PC, and prepare the printer for manipulating the drivers. First, the printing device is disconnected from the computer. Then through the “Start” you need to open the “Devices and Printers” section and remove from it the driver installed for your printer model (HP LaserJet p1102). After that, you can run the file with the driver, downloaded previously, and install it, following the wizard’s prompts.

With your printer connected to your PC, try printing your document. If the device does not print again, you can reinstall the driver again or check through the operating system why the printer stopped printing.

List of basic actions

A sequential troubleshooting checklist allows you to one by one eliminate different causes of the printer not printing.

Initially, if the HP LaserJet p1102 product does not print, you need to check all connections. If the printer is connected to the network, try starting it by enabling the start button. Next, make sure the machine is connected with a cable or wirelessly to your PC. The reliability of this connection should also be checked. Then you can check the connection settings (compare the routing protocol of the device and the access point).

In cases where a printing device with a wireless connection does not print, you need to make sure that the connection is secure. If the printer is searching, the light will blink. In this case, you can wait while it connects to the specified access point, having previously checked the settings and the connection path. If the light is not blinking, it may indicate that there is no wireless connection. For such situations, you can force the device to connect or run a program that will be used to configure and connect. To check how the printer prints, you can then start printing a document with configurations.

READ  Is it possible to print from a tablet to a printer

If the unit does not print the specified page, you will need to remove it from the system, after which you should try to install it again.

If these steps are not enough for the printer to start printing, you can contact the Consumer Care Center with the model of the device.

There are other reasons why the printer may stop functioning. First of all, this is the wrong position of the paper in the input tray. This is probably why the device does not print. You also need to determine what the paper specifications you are using and whether it meets the consumables requirements for the HP LaserJet p1102 product.

On the technical side, the printer may stop printing if:

  • the wrong software is installed;
  • the print driver is not installed;
  • the driver is not compatible with the device model.

In such cases, you can check why the device has failed by trying to print a configuration page. If the print does not reproduce, you should perform the same actions from another PC on which the corresponding drivers are installed, software.

If the print quality has decreased

For situations where the printer has become faint to print, it is worth rechecking the print settings with the parameters of the media used. Also, the reasons for faint printing can be hidden in the components of the cartridge and the features of the toner.

HP monochrome printers often experience printing problems (the printer prints faintly) due to wear on some parts of the cartridge. First of all, this is a metering blade and a magnetic shaft, which it is desirable to change at the same time in order to extend the operating life of the consumable. To understand why the product prints faintly and whether such parts need to be replaced, you can send a completely gray document to print. If the result is unsatisfactory, replace the specified parts. After the procedure, the result should improve significantly.

Faint printing on the printer can be eliminated by replacing the drum. But this manipulation will be effective if the new drum, according to the specifications stated by the manufacturer, is able to attract toner more actively than the previous drum, or the drum wear cycle has almost reached the end.

Below is helpful

HP P1102 printer won’t print? Restoration of performance!

Having problems with your HP P1102 Printer? Malfunctions in the operation of a printing device can occur for various reasons: from general malfunctions to more serious problems that cannot be dealt with without the help of a specialist.

If the HP P1102 printer does not print, the first step is to reinstall or update the driver on your PC. This can be done by installing the software from the included disk. You can also download the desired product on the official HP website in the “Support” section.

HP P1102 Universal Recovery Instructions

Seeing a problem with your HP P1102 Printer? The specialists of the MosToner service center recommend acting according to the step-by-step instructions for resolving faults. If at a specific stage a way to solve the problem is found, it means that there is no need to perform other operations.

  • Step Check the correctness of the printer settings, including the connection of the power cable to the network.
    • Check how the consumable is installed.
    • Start up the printing device by pressing the “Start” button.
    • Step Establish a reliable connection between the printer and the computer.
    • Step If a characteristic blinking of indicators was noticed on the control panel, to eliminate the error, refer to the information from the table.
    • Step Select paper of appropriate quality and other parameters for a specific printing device and correctly insert it into the feed tray.
    • Step Verify Software: Install the required software and print driver for your printer model.
    • Step Print a self-test page or print any document in a different format. You can also try using a different PC to print the test document.

    What to do if the HP laserjet p1102 printer does not print?

    Any of the peripheral devices that make it easier to perform many printing tasks can fail, which can lead to a decrease in the quality of the processed documents. And if your HP LaserJet P1102 printer stops printing or prints faintly, there are a series of steps you can take to help you troubleshoot.

    Some device models from the same manufacturer (for example, HP LaserJet 1018, HP LaserJet 1020, HP LaserJet 1022, HP LaserJet p1102) may show the same errors. Why this happens can be explained by the similarity of printing technologies. However, it will be necessary to solve the problem in each individual case on an individual basis.

    READ  How to Install Printer Cartridges

    HP P1102 prints slowly? Checklist of factors that affect print speed!

    Typically, the following factors will affect the performance of your HP P1102 printing device:

    • use for printing of different types of paper (including sheets of increased density);
    • size and format of images for printing;
    • computer power;
    • unstable connection between devices: PC printer.

    Need to restore your HP P1102 to work? MosToner service center. free visit of the master within the Moscow Ring Road!

    The computer does not see the HP laserjet p1102 printer

    START COPY CONFERENCE
    Printers, copiers, MFPs, faxes and other office equipment:
    issues of repair, maintenance, refueling, selection

    Good day to all. They brought HP P1102 with a problem. the computer does not see. The device is almost new (I did not know how and why this happened) I tried to warm up the board according to the principle of HP 2015. it did not help, zero emotsy. Can anyone tell me. thank.

    Blow off CR1 and CR2 for a start. Only without them it is not safe to poke USB into a hot one. A little further, the diode is also questionable.

    (2) Port intact checked everything rang.

    (1) Sorry, but what are CR1 and CR2 responsible for? While a little tight with trace elements.

    protection-static and other imbalances, cr1 interface, cr2 on power supply

    this is their disease, although some of those who came with such a troubles for some reason worked for me. here on canons it is worse, the controller itself crashes there.

    I returned this one to a client the other day. Thunderstorm flashed to the controller. The client started thinking about replacing the formatter.

    (7) Who is CR1 himself? Found here on the datasheet “pnp dig”, and did not enter what it is.
    And the printer is such an ideal option for refuellers, check cartridges.

    UPD: Ugh, I asked myself. I will answer myself. Digital transistors (with built-in resistor)

    (8) diode assembly, they have bad markings

    (9) Omg. Every day news) And the design of the protection scheme is different in different devices, or you can safely transplant CR and VR?

    (10) for nutrition, you can, probably. although. H.Z. each is invented for its own. capacity is critical on the data bus. Diodes in CR are tricky.
    “TVS (transient voltage supressor) diode is a semiconductor component designed to limit surges of voltages that exceed the avalanche breakdown voltage of the diode.
    Under normal conditions, the TVS diode is in a high impedance state. When the voltage across the diode exceeds the operating voltage, the impedance of the diode decreases and the discharge current begins to flow through it. When the voltage across the TVS diode drops, it returns to a high-impedance state again.
    The current-voltage characteristic of a TVS diode is similar to that of a zener diode, so they are sometimes confused with each other. In fact, these are different devices. TVS diodes were designed specifically to protect circuits from overvoltage surges, while zener diodes are designed to stabilize voltage and are not designed to withstand significant current surges.
    TVS diodes have fast response times, low operating voltage and low capacitance, making them ideal components for protecting semiconductor components from ESD. “

    Will replacing pay solve the problem? Or are there any other pitfalls? (The fee, in principle, is not expensive about 40)

    (ten)
    Protection schemes differ from device to device in terms of the types of parts used.
    In principle, you can transplant and construct a canopy from those available at hand, you just need to be aware of what is being done.
    So, there are parts that can be thrown away and will work. (All of (12)).
    And there are almost the same, but they are placed in a chain break. For example CM1231.
    (in a tc printer, it seems to be worth it).
    Accordingly, when they are thrown away, it will stop working.

    (12)
    The assembly with the A7 marking code, by the way, is not an ECD. This is a common diode assembly.

    Kroha_Ru (14): The assembly with the A7 marking code, by the way, is not an ECD. This is a common diode assembly.

    this is from a student’s essay. And I finally can be a mechanic by education.

    (15)
    What am I? I’m nothing. To clarify, simply.

    Kroha_Ru (16): I am nothing
    for me Duc shone. in electronics.
    lan. flood. sorry.

    (17) Will replacing pay solve the problem? Or are there any other pitfalls?

    The information received is simply invaluable! thank.

    Doorkiss (13): And replacing the pay will solve the problem?
    will decide

    If the print quality has decreased

    For situations where the printer has become faint to print, it is worth rechecking the print settings with the parameters of the media used. Also, the reasons for faint printing can be hidden in the components of the cartridge and the features of the toner.

    HP monochrome printers often experience printing problems (the printer prints faintly) due to wear on some parts of the cartridge. First of all, this is a metering blade and a magnetic shaft, which it is desirable to change at the same time in order to extend the operating life of the consumable. To understand why the product prints faintly and whether such parts need to be replaced, you can send a completely gray document to print. If the result is unsatisfactory, replace the specified parts. After the procedure, the result should improve significantly.

    READ  How to connect a printer to HP Wi-Fi

    Faint printing on the printer can be eliminated by replacing the drum. But this manipulation will be effective if the new drum, according to the specifications stated by the manufacturer, is able to attract toner more actively than the previous drum, or the drum wear cycle has almost reached the end.

    Below is helpful

    Technical specifications

    The HP P1102’s specifications are solid enough for an entry-level laser printing solution. As noted earlier, it is based on the laser method of obtaining prints. Therefore, the print quality in this case is rather low, but it is more than enough for displaying text information, tables and diagrams. You can also count on getting pictures of mediocre quality. The advantages of this printing method include a large volume of printing for 30 days. about 5000 pages for HP P1102, and high-speed performance. 18 single-sided pages within a minute. Additionally, it should be noted that the cost of consumables and accessories in this case is minimal. The maximum page size for printing is 210×297, or the most widespread at the moment A4 format. In addition to this, it is possible to print on pages of arbitrary size: setting the printer properly allows this to be done without any problems. The density of the paper for printing should be in the range from 60 to 160 g / m 2. There is only one connection method in this case. USB 2.0, but you can also use other compatible modifications of this universal interface for this purpose.

    Cartridge

    The next step is to install the cartridge into the HP LaserJet P1102 printer. To do this, remove it from the protective case. Then open the front panel of the printer. In the next step, carefully install the cartridge inside. The original package contains a cartridge of the CE285A model with a print resource of 500 pages. After refilling, this number increases to 700 single-sided sheets. There is also an improved modification of this cartridge. its model CE785D. In this case, you can count on printing 1500 pages from one filling.

    Installation at the place of use. Connection

    Positioning

    This HP laser printer is an entry-level printing solution. First of all, this is indicated by a fairly democratic cost. But additional arguments in this case are the average quality of the output documents and the minimum set of methods for connecting. Also, this positioning of this product is indicated by the fact that its monthly page yield does not exceed 5000 pages. As a result, this peripheral solution is perfect for creating a printing subsystem in a small office with no more than 10 workstations. It can also be used quite successfully in a workgroup with a similar number of PCs. Another possible area of ​​its use is home. In all other cases, this laser printer must be supplemented by another printing device for the reason that its monthly print volume will certainly not be enough.

    The cost

    This printer is marketed by the manufacturer as an entry-level product. As a result, such a cost is fully consistent with its parameters and specifications.

    Equipment

    The HP laser printer of this modification is completed as follows:

    Disk with application software and electronic versions of documentation for this peripheral device.

    Hardcopy Quick Setup Guide.

    The manufacturer did not include an interface cord in the documentation set, which is used to connect to the system unit of a personal computer. The new owner will have to buy this accessory separately and for an additional fee.

    Installing Drivers

    The next step is to run the HP LaserJet P1102 printer installer from the CD. Then, following the instructions of the setup wizard, we install the drivers. In this case, the printer will be configured in automatic mode, and no actions should come from the user, except for those that will be requested by the wizard. As a rule, at this stage the printer is turned on.