Install Canon mf3010 printer without disk

Automatic software download

In order for the operating system to always automatically load drivers and pictures for connected devices, you can do the following.

We call the context menu with the right mouse button on the computer icon and select Device installation settings.

install, Canon, mf3010, printer, disk

In the window that opens, select the recommended setting and “Save Changes”.

Now, when a new device is connected, Windows will automatically search for a driver in its database.

Windows Update

Windows has a huge software base for almost all peripheral devices, including printers. We use it.

We connect the printer or MFP to the computer and wait a couple of minutes. The device will be identified or detected and Windows will try to install the driver. Since you are reading this article, then most likely this method did not work. Let’s start the update manually.

Control Panel Hardware and Sound Devices and Printer

Control Panel Hardware and Sound Devices and Printers

Click on the computer icon with the right mouse button and select. Windows Update.

In the window that opens, click “Check for updates”.

This will search for software for your devices. If something is found, it will either be downloaded and installed automatically, or you will need to give permission. In my case, everything is done automatically.

You may need to restart your computer. Run and see if the printer is installed. If the device is installed, but does not print, then I would connect it to a different USB port. (If the printer does not print in principle, you can see this article).

Manual download and installation (.exe)

Take the HP DeskJet F380 for example. If you do not know the model of your printer or MFP, then carefully study the identification labels on the case. You can also find the model on the sticker on the back or bottom of the device.

We open a browser and in Google or Yandex we write “HP DeskJet F380 driver”. You substitute your model.

In most cases, in the first place, or on the first page of the issue, there will be a link to the equipment support page on the manufacturer’s official website.

You can understand that this is the official website at.

It is more convenient to download from the official website for two reasons:

  • No malicious code;
  • There is the freshest software.

If there is no link to the official website on the first page of the issue, then you can find it yourself. We set “HP” and immediately select “Drivers” or “Support and drivers”.

In the section “Drivers and downloads” set your model (for example, “F380”) and click “Go”.

Or, you can click Find Now on the right side of the Define Product section and follow the instructions in the wizard. (This option is still available for Windows XP / Vista / 7 with browsers: Internet Explorer (IE) 6.0; Firefox 3.6.x, 12.0; Google Chrome).

Select our device from the search results.

Select your operating system from the drop-down list and click “Send”.

There may be several software options here. For example, full featured software and basic driver. If you need advanced capabilities of the device and image processing. download the full-featured software.

The files will be unpacked and the installation wizard will start. Click “Install” and follow the further instructions described in detail in the article about installing a printer from a disk.

How to install a printer without a disk

In the last article, we figured out how to install a printer from the installation disk, in this one we will figure out how to be if there is no disk.

  • Windows Update;
  • Download the driver yourself.

Windows Update installs basic drivers. They only allow printing and / or scanning. Additional functions, such as image processing before printing, adjusting colors and others, will not be available.

The advantages of the second method are that we will download the latest software for the device and all specific functions will be available.

Manual download and installation (.zip)

How to install the driver from the update center (for example, HP 1015)

  • Disconnecting the HP 1015 from the computer.
  • Start Menu Devices and Printers.
  • “Setting up a printer”.
  • “Add a local printer”

We don’t need the printer itself. We need software that installs with it.

  • We connect the HP 1015 to the computer and wait until the unit “grabs” the already installed driver.

[youtubegallery]
Configuring Automatic Updates on Windows 8 | http: //www.YouTube.com/watch? V = 5wn6VBS26gQ
Driver for Epson LX-300 under Windows 7/8 / 8.1 / 10 | http: //www.YouTube.com/watch? V = pbdhDJi4GpA
Installing the HP LASERJET 1015 driver via Windows Update | http: //www.YouTube.com/watch? V = rCceydYLbjI
[/ youtubegallery]

Installing a driver from another printer

Let’s look at the example of Windows 7 64-bit and the Xerox Phaser 3116 printer.

There is no software manufacturer for this system on the website. You can try from Xerox Phaser 3117.

  • Download the driver for the Phaser 3117 and unpack it.
  • We connect the device to the computer.
  • Open Start in the search field and write “Device Manager”. We launch it.
  • Right-click on the unknown device / printer, call the context menu, and select “Update drivers”.
  • Search for drivers on this computer.
  • Select a driver from the list of already installed drivers.
  • Selecting “Printers” and “Next”.
  • Click “Install from disk”.
  • Pointing to the XRxb7.inf file in the unpacked folder.

Automatic installation

The latest OS versions from Microsoft. Windows 10, 8.1 and others, provide a wide range of software for various plug-in units. It is often sufficient to simply connect the device for correct operation. After a few minutes, it will already be possible to use it.

Setting up the MFP

After successfully installing the drivers, your printer is ready to use. Now you can print, scan, create copies on it. If you do not yet have practical experience with an MFP, you still do not know how to scan, then it is useful for you to familiarize yourself with the Canon i-SENSYS MF3010 manual, indicating how to scan any document. We can also help you understand how scanning works with the Canon i-SENSYS MF3010.

We focus on what changes to the settings can be made to ensure maximum results.

Canon i-SENSYS MF3010 which driver to install?

For the PC to communicate with the printer, you need to install drivers. With the help of drivers, we control the printer, send print jobs from the computer. A driver is a special program that runs in the operating system and interacts with the printer.

Before downloading and installing drivers on your computer, you need to determine which driver is suitable for your operating system. You can’t just take and install any first driver that comes across, in the hope that the printer will work. Even if it is a driver for Canon i-SENSYS MF3010.

READ  Win 10 can't see Canon printer

The choice of software is influenced by a number of factors: the make and model of the printer, the operating system (Windows, Linux, Mac) and other factors.

How to install a printer without a disk?

If the Canon i-SENSYS MF3010 driver disk is missing or defective, you can install the printer without the disk. An Internet connection is required. Open the Canon official website, select the driver you want, download to your computer. Run the installer and follow the prompts.

Practical use of MFPs

After your printer is ready for use, you can print a test page. And also you can print any document you created earlier. A properly configured printer will flawlessly perform all the tasks you designate.

You can also not immediately send the document to print, but initially go to the “Properties” of the device. In this window, you can change the factory settings, orient the MFP to perform actions that are important to you at a particular moment:

  • printing multiple copies at the same time;
  • printing not the entire document, but a separate fragment or certain pages;
  • selection of a specific sheet format;
  • choosing a different page orientation;
  • setting different levels of print quality.

If the majority of users can print, then not everyone had to scan before. For this reason, initially, when it becomes necessary to scan documents, some users experience a stupor. They do not understand how such actions are carried out. In fact, the scanning process is simple, just read our recommendations or the corresponding section of the user manual.

So, if it is important for you to start scanning documents, go to “Start”, go to the already familiar menu item “Devices and Printers”. After the main window opens, you will find in it the listed printers that are ready to work, select your MFP, click on it once to make it highlighted. Now, just below the address bar, you will see a menu bar with several parameters.

You need to find the “Start Scan” option, click on it, and the automatic process will start. Another window will appear where you, as a user, can make some changes. However, such changes do not need to be made initially, at the initial introductory stages. Click on the button below “Scan”, and the device will perform the tasks you set in front of it.

As you can see, the scanning process is also straightforward. It is even easier to copy documents, just place the document, close the top cover and press the corresponding button located on the body of the MFP itself. It will be easy to find such a button, since it is accompanied by an icon that shows two copies of the document, and also below this icon there is a corresponding name.

In addition, the problem may arise against the background of a viral interference. Viruses often leave behind negative traces, including severely damaging drivers. In this case, you will have to reinstall the drivers in order to restore the normal functioning of the multifunctional device.

So, the installation and subsequent configuration of the Canon i-SENSYS MF3010 multifunctional device is not accompanied by difficulties, if the user followed the recommendations, got acquainted with the aLGorithm of actions and, based on them, carried out all the manipulations.

Driver for Canon i-SENSYS MF3010 Free?

On the official website of the printer manufacturer, the devices are structured, you can quickly and easily select the required driver. It is enough to enter the printer model number in the search field and the system will display the desired driver, as well as all the necessary software, information and instructions for installing and operating the printer.

You can also select the operating system there. Typically, the script automatically detects the OS. You just have to decide on the version, paying attention to the update date, language, size of the downloaded file.

On the official resource, you can download the driver for the Canon i-SENSYS MF3010 printer for free. Use only software from official developer resources. Remember, when using files from unverified sources, the chances of the normal operation of the printer are low, the risk of infection of the computer increases.

Canon i-SENSYS MF3010 Installation Disc

Insert the disc into your computer and follow the instructions on the screen. If the disc contains drivers for different operating systems, during the installation process, select the appropriate one for your system.

Canon i-SENSYS MF3010 cartridge, driver, installation, setup

For normal, trouble-free printing of documents using the Canon i-SENSYS MF3010 printer, there are some product requirements that must be met. The main ones are the presence of an installed driver and a refilled cartridge. In this article, you will learn how to install a driver on a printer. where to download it, solve possible problems with connecting, installing and configuring the printer.

Installing Drivers

Most often, the drivers are included. However, not all computers and laptops have floppy drives in their composition, so a disc from the manufacturer may be useless.

In this case, the user can go to the official website in the support section, select the driver there and enter the name of his model. You can also find the section you need on the Canon website. After selecting the model, a window will appear with the choice of the operating system. Here you should carefully indicate your OS, not forgetting about the bit depth. Then it remains to click on download, after which you can proceed with the installation. In some cases, the drivers are available as archives, then they should be unpacked and only then run the executable file.

Towards the end of the installation, you may need to connect a cable to a computer, if during the installation a wired connection option was selected (for devices that work via WI-FI or a local network, the corresponding item will be available during installation). At this point, you should make sure that the printer is turned on and connected to the computer. After that, you may need to reboot and you can start working.

How to install a printer without a disk

In some cases, you can do without a disk and drivers. First, you will also need to connect the printer to the computer, then go to start and find the section devices and printers, you can also go through the control panel.

In this section, you need to click on add a device, after which the system will show all found printers that are ready for installation.

After that, she will prompt you to specify the location of the drivers or continue automatically, you should choose the second option. After that it will be possible to print, however, it is better to use the drivers from the official site.

Adjusting color and brightness

This section is available under color intensity / brightness settings.

Here you can adjust the values ​​of a particular color, however, the final result can only be seen after printing. It should also be borne in mind that the result on glossy and matte paper can be very different.

How to connect a printer

First you need to decide on a place to install your Canon printer. It should be located near the computer, the device should be in a stable position, all wires should be free to reach the desired sockets, it is advisable to avoid tension on the wires. It is also undesirable to install equipment in direct sunlight and near heating devices in order to avoid overheating or other damage.

After choosing a place, it remains only to connect the wires to the outlet and to the computer, most of the data exchange goes through the USB port, which is in every computer, some older models use LPT ports that are absent in modern devices. In these cases, you just need to plug the cables into the necessary ports and you can proceed to the next item.

READ  Canon Ts5040 Printer Does Not Print

Multifunctional devices can have connectors for connecting to a local network or the Internet rj-45, this will provide access to them for several users at once, which is useful for offices. Modern models can also communicate over Wi-Fi. In these cases, it will not be enough just to connect the wires and install the drivers, you will need to go to the Canon printer menu and connect to Wi-Fi by entering the network password and specifying the device name or to connect to the local network in the same way.

Operating system print settings

This is the setting that is called when you click on the file. print or by pressing the CtrlP buttons. There are also a couple of interesting points here, but, basically, here you can select the number of required copies, paper size and its orientation, you can also select and specify individual pages for printing.

Here you can also select a printer if the user has several of them.

Connecting, installing and setting up the MF 3010 printer and other Canon models

Most users who print documents more or less often, sooner or later decide to buy a printer for themselves, because printing in other places, especially paid ones, is not very convenient and time-consuming. However, after the choice has been made and the printer has been brought home, it is not possible to print immediately; there remains a need for its correct setup. This article will talk about installing and configuring the Canon i-SENSYS MF3010 printer, however, the instructions are also suitable for other printers from this manufacturer, only when searching and installing programs you will need to focus on your model.

How to set up a Canon printer

Most of the parameters are identical for all models, it is carried out through the standard utility. In order to open it, you can go to devices and printers, then find the installed printer, right-click on it and select the Printing Preferences section.

Instructions for installing a printer without disc

If the kit does not include a driver disc for the Canon i-SENSYS MF3010 MFP, beginners do not know how to set up the printer, so they start to guess. In fact, the printer can be installed even in the absence of drivers, and there is no need to first search and download them in advance.

To use this method of installing the MFP, first connect the printer to the computer. After that, click on the “Start” item, on the right side you will find the line “Devices and Printers”. The same line can be found by going to the “Control Panel”.

In the “Devices and Printers” window that opens, you can easily find the “Add a device” button, click on it. Next, the installation wizard will determine all the printers that it will be ready to connect. You just have to click on the printer that you are currently trying to connect.

After completing these steps, a new window will open in which you will be prompted to install the drivers from the disk or continue their automatic installation. Of course, you must click on the “Next” button, the wizard, in this case, will independently find the necessary drivers and install them.

Installing and configuring the Canon i-SENSYS MF3010 printer

If you are the proud owner of the Canon i-SENSYS MF3010 printer, you should worry about its correct connection to the PC, as well as the correct installation of the appropriate drivers. Unfortunately, without performing such manipulations, your MFP will not be able to please you with quality work.

How to install and configure the Canon i-SENSYS MF3010 printer yourself.

It’s good when the Canon i-SENSYS MF3010 is a power user. It will be quite easy for him to independently figure out all the nuances that arise when working with multifunctional devices. It is a different matter when installing the Canon i-SENSYS MF3010 printer is necessary for a beginner who is not familiar with any technical issue related to such a device. We recommend such beginners to carefully read the instructions, which must be included in the kit if the Canon i-SENSYS MF3010 is purchased at a retail outlet.

If you are offered to buy an MFP from hand at a tempting cost, do not be alarmed if after purchasing you did not find such an important user manual for you. We will help you navigate the steps associated with installing and configuring the MFP, after which the printer will be able to please you with quality work.

MFP connection

If you have purchased the Canon i-SENSYS MF3010 MFP, for its correct operation it is important to fulfill initially two basic requirements:

  • install drivers correctly;
  • install a refilled cartridge.

You cannot ignore the installation of the driver for the MFP, since the driver is a special program that allows you to control the device, send print jobs. Accordingly, each printer comes with its own specific driver. Otherwise, installing the wrong driver will prevent the computer from communicating with the printer.

Setting up the MFP

After successfully installing the drivers, your printer is ready to use. Now you can print, scan, create copies on it. If you do not yet have practical experience with an MFP, you still do not know how to scan, then it is useful for you to familiarize yourself with the Canon i-SENSYS MF3010 manual, indicating how to scan any document. We can also help you understand how scanning works with the Canon i-SENSYS MF3010.

We focus on what changes to the settings can be made to ensure maximum results.

Installing the driver

So, realizing that the driver is the most important tool that allows you to ensure reliable communication between the PC and the MFP, first of all, after purchasing the device, the user must install this special program.

Most often, the driver is included in the kit, so it is enough to review the packaging and find the stored disk in it. In very rare cases, the printer can be sold in retail establishments without such a disk. However, in these cases, the manufacturer does not forget about his customers, he puts the appropriate drivers on his official website. And also drivers can be found and downloaded from other sources on the Internet.

Before directly downloading the installation files, it is recommended to restore information in your memory about the operating system installed on your PC. At the time of selection, users will be offered several options for download archives, suitable:

  • for Windows 7 or Windows 8;
  • 32 or 64-bit system.

When visiting some resources, you will only need to enter the printer model, and the built-in plugins will automatically detect your operating system and its bit. After that, they will immediately offer you a file to download. Most often, drivers are downloaded in an archive, so before using them, first unzip the archive.

Now, disconnect your printer from your computer, go to the folder where you unzipped the driver. In this folder you will find a Setup file with the extension.exe. It is on this file that you double-click to activate it and start the installation process. Now the installation wizard window will appear on the screen. As a matter of fact, you should obey the recommendations of this wizard, do everything he asks and press the “Next” button.

When the wizard approaches the final stage of the installation, it will definitely tell the user to connect your device to the PC. Connect the printer to your computer using a USB cable. This completes the installation of the drivers, respectively, the printer will be ready to perform tasks. Sometimes a reboot of the operating system may be required for all changes to take effect. If such a request is received, do not be lazy, restart your computer.

READ  Reset counter on Canon pixma printer

Practical use of MFPs

After your printer is ready for use, you can print a test page. And also you can print any document you created earlier. A properly configured printer will flawlessly perform all the tasks you designate.

You can also not immediately send the document to print, but initially go to the “Properties” of the device. In this window, you can change the factory settings, orient the MFP to perform actions that are important to you at a particular moment:

  • printing multiple copies at the same time;
  • printing not the entire document, but a separate fragment or certain pages;
  • selection of a specific sheet format;
  • choosing a different page orientation;
  • setting different levels of print quality.

If the majority of users can print, then not everyone had to scan before. For this reason, initially, when it becomes necessary to scan documents, some users experience a stupor. They do not understand how such actions are carried out. In fact, the scanning process is simple, just read our recommendations or the corresponding section of the user manual.

So, if it is important for you to start scanning documents, go to “Start”, go to the already familiar menu item “Devices and Printers”. After the main window opens, you will find in it the listed printers that are ready to work, select your MFP, click on it once to make it highlighted. Now, just below the address bar, you will see a menu bar with several parameters.

You need to find the “Start Scan” option, click on it, and the automatic process will start. Another window will appear where you, as a user, can make some changes. However, such changes do not need to be made initially, at the initial introductory stages. Click on the button below “Scan”, and the device will perform the tasks you set in front of it.

As you can see, the scanning process is also straightforward. It is even easier to copy documents, just place the document, close the top cover and press the corresponding button located on the body of the MFP itself. It will be easy to find such a button, since it is accompanied by an icon that shows two copies of the document, and also below this icon there is a corresponding name.

In addition, the problem may arise against the background of a viral interference. Viruses often leave behind negative traces, including severely damaging drivers. In this case, you will have to reinstall the drivers in order to restore the normal functioning of the multifunctional device.

So, the installation and subsequent configuration of the Canon i-SENSYS MF3010 multifunctional device is not accompanied by difficulties, if the user followed the recommendations, got acquainted with the aLGorithm of actions and, based on them, carried out all the manipulations.

Installing the software

Drivers are downloaded as an installation package with the exe extension. If you had an installation disc, you would find the exact same file inside it. Accordingly, the installation order does not change either:

  • Run the downloaded installation file, usually Setup.exe.
  • With the help of the installation wizard, go through all the steps.
  • Restart your computer (if the wizard prompts you to do this).

After rebooting, go to the “Devices and Printers” section to make sure that the printer is correctly detected by the system and is used by default.

Diskless Printer Installation: Finding the Right Driver for the Right Place

Have you figured out how to install the printer, but you don’t have a driver disc on hand? Or have you figured out how to connect a printer to a laptop, but the laptop does not have a drive to insert the software media? Situations may be different, but one problem unites them. the need to install drivers on the printer without a disk.

Equipment ID

If you do not want to search for drivers on the official website (or for some reason the required software is not there), you can use another method:

  • Right click on “Computer”.
  • Open the Manage tool.
  • Go to “Device Manager”.
  • Right click on the printer you have connected.
  • Go to the “Details” tab.
  • Open the “Equipment ID”.
  • Copy the first value (if nothing was found for this code, try the second one).
  • Paste it into the search box on devid.info.

Select the appropriate driver version (according to the version and bitness of the system) and click on the floppy disk to download the software.

Note: The ID of the equipment must be determined even if the device is not fully identified by the system. Simply put, if the printer is installed, then you can easily find out its code through the device manager.

How to find out which driver you need?

For the connected hardware to work correctly, you need to find the correct drivers. To successfully complete this task, you need to know:

  • Printer model.
  • Operating system version and bitness.

Look for the exact model on the device case, box or user manual. You can find out the version and bitness in the system properties:

  • Right click on “Computer”.
  • Open “Properties”.
  • Check the system type and edition. Knowing these parameters, you can download the driver from the manufacturer’s website for printing. If you have a Canon printer, go to the Canon.ru website and go to the “Support” section. For HP Laserjet drivers can be found on HP.com, etc.

Driver download

To quickly download Windows 7 printer drivers from the official website, use the search by model. Let’s take a Canon driver as an example:

  • Go to the manufacturer’s website.
  • Go to the section “Support”. “For individual users”.
  • Click “View All Products”.
  • Enter the exact printer model in the search box to find and download the installation disc.

Smart Search will find the software you need and automatically detect your operating system. Let’s say you need drivers for Windows 7. check that not only the version matches, but also the bitness (32 or 64 bit), then click “Download”. For HP, drivers are located and downloaded in the same way as for printers of other brands, Epson, Brother, etc.

Update centre

You can try installing the printer through Windows Update. There is nothing complicated here:

  • Disconnect the printer from the computer.
  • Open the “Devices and Printers” section.
  • Click on the “Install” button.
  • Select “Add Local”.
  • Leave the port unchanged.
  • Click on the “Update Center” button.
  • Wait until the available drivers are loaded and select the software for your model (or at least a series).
  • Leave the printer name unchanged and wait for it to install. You don’t need to allow sharing.

After installation, you will see the added hardware icon in the “Devices and Printers” section. Right-click on it and select “Delete.” Then connect the printer and wait until it “grabs” the previously installed software.

Do not forget to rate the entry and share it with your friends on social networks by clicking the special buttons below.
Don’t forget to leave a comment and subscribe to our YouTube channel

NNCXV.INFO 2021