Install Epson L222 Printer Without Installation Disc

How to start the printer without the installation disk. How to install a printer on a computer without an installation disc in Windows 7-10

It is a sad situation when your printing device is without a driver disk or if there is no disk drive in the PC. In this article, we will show you how to install the printer in this case. It is more difficult to do this without an installation disk, but it is possible even for an ordinary user.

There is a special difference. if you want to connect to a laptop or Install on a computer, all the steps to connect the printer will be identical. In fact, the solution to the problem rests on the ability to install the driver. We will consider how to do this procedure using the example of Windows 7 and models from HP, Canon and others.

Manual installation

The easiest way to add a local printer to your computer is to manually install its drivers.

If you have a Windows operating system, the procedure should be as follows:

We go to the section “Devices and Printers”. To do this, click the “Start” button and then select “Devices and Printers”.

If you have Win10 installed, then the procedure for entering the “Control Panel” is described in this subsection of this article.

In the window that opens, look for the button for adding a new printer. Depending on the version of your Windows, its name may differ slightly.

Click on the “Add Printer” button at the top left. In the next window, select “Add a local printer”.

DO NOT make any changes in the port selection window. Leave the LPT port and click “Next”.

In the window that opens on the left, select the manufacturer of your device. After that, a choice of models will be available. Among them, you should find the desired model.

If your device model is listed on the left, then click the “Windows Update” button to download the missing devices.

After selecting the desired printer from the list, click “Next” and Change its name, if necessary.

Then the software installation process will start. After its completion, a little adjustment will be needed.

This step configures sharing of the installed printing device.

Oddly enough, but the further action will be to remove this device from the list in the “Devices and Printers” window. Select it, right-click and from the menu that appears, select “Remove device”.

We connect the previously disconnected cable. We are waiting for a little time and printing from a computer or laptop should work.

Downloading drivers

If the above described option does not work, then you should try to download it directly through the official website of the product manufacturer.

How to install a printer without an installation disc

If you are installing the printer on your computer and you have an installation disc at hand, there is nothing to worry about.

Here is a Step-by-Step Guide to Installing a Disc-less Printer.

USB connection

Most modern printers support USB connection, which helps to install the Corresponding drivers. Make sure your computer or device is connected to the Internet. To install drivers from the operating system Connect the printer via USB and turn on the printer.

If the printer does not have a USB connection, go to step three.

Start the installation process

Some printers automatically search for the correct drivers as soon as the device is connected via USB. Just follow the instructions on the screen to complete the installation process.

If the drivers are not installed automatically, you can manually search and start the installation:
Windows. Open “Control Panel” and click “Devices and Printers.” Click “Add Printer” and the system will start searching for a printer. When the printer you want to install is displayed, select it from the list and follow the instructions on the screen.

Mac OS X. Apple menu Click System Preferences. Select “Print & Fax” and press the “” button on the screen at the bottom of the printer list. Select your selected printer and follow the onscreen instructions to complete the installation.

Download drivers for specific printers

Printer manufacturers post drivers for their products on their websites so that all customers have access to all the software they need, allowing users to use all the features of their printers. To find the required drivers:

If your computer has an Internet connection, download the drivers to another computer and copy them to a USB flash drive with 200MB or more memory. Connect USB stick to computer and copy drivers.

For more information on printers and our fantastic selection of offerings Visit the Printerland homepage or call our dedicated sales team on 0800 840 1992.

How to install an HP printer without an installation disc

How to install an HP printer without an installation disc. HP. Famous company in the world. The company deals with various segments of technical devices such as printers, telephones and other devices. The most demanded and best-selling product. It’s a printer. Latest embedded technology, improved and high performance. Key features of HP printers. THESE gadgets require installation in accordance with their specifications, and there are different installation methods. In this blog, we will discuss how to install an HP printer without an installation disc. These are the various ways that we will discuss in the following sections.

To use such gadgets, install. This is the initial step, without installation we will NOT be able to use printers. Various types of procedures are available for installation. When it comes to How to Install an HP Printer Without Installation Disc. Other methods such as USB, booting from the Internet, etc. Become useful.Technical support specialists are ready to explain every step.

Tech Support Expert. It is a highly professional and experienced help center. We offer our services to solve problems with your tech gadgets. Our professional on-call service is very helpful for users. To contact us, you need to dial the toll free number 800-742-9005. Our helplines work around the clock and seven days a week.

Here are the sections that guide you through how to install your HP printer without an installation disc. We will help you install your HP printer using a USB cable and download the software.

Solution: 1. Installing an HP printer using a USB cable

  • Connect the USB printer cable to your computer
  • Turn on your HP printer
  • Now click the start computer button
  • Now click on settings
  • Then enter “Printers & Scanners” and click
  • Now click on add printer or scanner.
  • Then the name of your printer will be displayed on the screen, Click on it
  • Finally, follow the on-screen installation instructions

When the installation process is complete, the printer is ready to use. Issue a command and check.

Solution: 2 Install the HP printer using the software

It is important to read the manuals for your HP printer prior to installation. There is a special section in the manual that mentions the model name and number, and also mentions the name of the supporting software, following which you can download the software. Here are the steps.

install, epson, l222, printer, installation, disc
  • Go to the official website of the HP printer manufacturer
  • Then Click the printer tab
  • Now find your printer model name and number
  • Now check the software download link and check also the compatible systems.
  • Click on the download link and wait for the file to download
  • After the files are fully downloaded, it comes in Zip format, so the program unpacks and extracts the software to the specified location.
  • Now double click the software installation files.
  • It took a little time, then follow the instructions on the screen
  • Finally, connect the printer via Wi-Fi or cable according to your printer and you will see that you can now access your printer.

To test the workflow, issue a print command. These are the methods to install HP printer without installation disc.

Why the help of technical support experts is important to install an HP printer without an installation disc?

You can expect first class service from us. Our team is well trained and has expert level knowledge. Our quick response and simple solutions are sure to solve your problems.

To contact us at any time, you need to dial our number 800-742-9005. This is our toll free number, so you can call us around the clock. Our lines are open on July 24.

Experience in other segments of gadgets

Our services are NOT limited to printers, we also provide recommendations for second gadgets. Here is our list in which we offer our expert assistance.

Get an economical survey for your gadgets only here.

How to install a Brother printer without an installation disc

How to install a Brother printer without an installation disc. Printers. The most important device of modern labor culture. Whether we are talking about school, college, or office projects, printers are essential. There are several printer companies available on the market. But Brother is the market leader in printers. Advanced technology, clean printing and easy maintenance. Here are the features of Brother printer. Every time you buy a new printer, you will receive an installation guide and a CD. In case you lost the CD, the question is: How to install a Brother printer without the installation CD. So, here we explain the installation process without CD.

Currently, new computers and laptops have a CD-ROM and you need to use other methods to install. Here on this blog, we will walk you through the procedures for How to install a Brother printer without an installation disc. Our company’s technical support specialists have tested and performed alternative installation methods, and we will discuss them here.

If you need help related to devices and gadgets, please contact us at 800-742-9005. This is our toll free number.

Ways to Install Brother Printer Without Installation Disc

There are several ways to install your Brother printer without the CD. It depends on your choice of how you want to install. For CD-less installation, you need a USB cable, wireless connection and required software, here are three alternative ways to install your Brother printer without CD-ROM.

Installing a Brother Printer Using a USB Cable

In this method, you will need a USB cable that supports your computer and printer. This cable is included with the printer. If you don’t have one, buy a new one and follow these steps:

  • Connect the printer and turn it on
  • Now plug the USB cable into the USB port of your computer and printer
  • On your computer, click the Start button and click it
  • Now Click on Devices and Printers.
  • At the top there is an option Add Printer
  • Now it asks for search, click on search and find your printer
  • Your printer name and connection instructions will now appear. So follow the instructions to add. Then the printer is ready for use.

Installing a Brother Printer with Online Software

Internet access is required to install the printer. So that you can access the official Brother Printer website to install software that supports your printer Here are the steps to download the software.

  • Turn on your computer and open a working browser.
  • Now enter the official website of the Brother printer in the search bar.
  • When you enter this search, find your printer model and click the download support software button
  • When the download links appear, download
  • Now the download process starts, so wait a little.
  • After the download is complete Click the installation files and proceed with the installation.
  • It took a little while, so wait.

Now check that your printer is installed and ready to use.

These are very easy ways to install Brother printers. All steps are checked and tested by our team of experts.

Why a tech support technician to troubleshoot devices and gadgets?

Our Economical practices make us excellent and trustworthy. To contact us, you need to call the toll free number 800-742-9005. Without waiting, we will answer your call within 30 seconds and provide you with professional service. Our helplines work around the clock and seven days a week throughout the year.

Experience with other gadgets

Our service criteria are broad and broad. We offer our services for the second gadgets. Any problems, call us now. We are always ready to help.

  • Router help
  • Apple and iOS Help
  • Antivirus help
  • Tablets and mobile phones
  • Microsoft Windows Help
  • Outlook email and help
  • Smart devices

For all problems, you can find a solution in just one call. So, without wasting time, call us on our free phone number. We are happy to help you.

How to install printer driver without CD / disk?

You want to install the printer on your computer without using CD / Disc?

This happens if you lose the printer driver CD, your CD drive does NOT detect the printer driver CD and there are a lot of scratches on it. Anyway, don’t worry, we have a solution. How to install printer driver without CD / disk. You can easily install the printer without using a CD.

It doesn’t really matter because these days, printer driver installation packages are readily available on their own official website. So, just download the installation package from your official website, and follow the installation procedure. Described below. In this article, we will share with you a step-by-step guide on how to do this. Follow these steps:

READ  The Printer Writes No Toner And The Cartridge Is Full

Steps to Install Printer Driver Without CD / Disk

Follow the instructions below to set up the printer.

  • First download the printer driver package from its own official website (Canon, Dell, Epson, Lexmark, Brother, Samsung)
    Note: You can also download drivers from our website: www.Freeprinterdriverdownload.Org.
  • DO NOT turn off the printer and disconnect the USB cable from the back of the computer and from the printer.
    Note: Keep the USB cable disconnected until the setup wizard asks you to connect it.
  • After downloading, double click the downloaded driver package.
  • Click Run or YES to allow UAC to start the installation process and then start extracting driver files to run.
  • Click “Next” to accept the installation terms and agreement. Then follow the instructions of the installation wizard on the screen.
  • Click Next.
  • The installation will start and wait for it to complete.
  • The installation wizard will ask you to connect your printer to your computer. Connect the USB printer cable to your computer. Make sure the printer is turned on. (See screenshot below)
  • Wait for it to automatically detect the printer. This will go to the next window as soon as the printer detects it.
  • Click Next and your printer will be detected here if you see a green check mark.
  • Click the “Finish” button to complete the installation.

Here on this page, we learned how to install a printer if we do not have its driver CD (no CD). If you have any questions regarding this installation process, please share your experience in the comments section below.

Questions and answers

Find answers / ask a question. You will receive an answer as soon as possible. It’s free

Question: I need new drivers for my Samsung clp315w and brothermfc7340 printers

Question: The Epson l360 driver is free on the web.

Answer: Yes, in the download section of this page above you will find a link to download the driver for supported operating systems.

Q: How to install printer without CD?

Answer: Very simple. We have followed all the steps above. We will give you a step by step guide how to do it if you can provide the printer model number.

Q: How to install windows 7 printer model no dcp-l2541dw?

Question: How to connect to mobile

Let us know if you liked the post. It’s the only way to get better.

How to install a printer on a laptop without an installation disk. How to install a printer without an installation disc for free

In most cases, when buying a printer, drivers are provided for it. If you have lost them or scratched the disc, and you need to use the device urgently, then you need to look for a way out of the situation. Many users are starting to wonder how to install a printer without a disc. This is more than real, and there is nothing difficult here. The main thing is to have patience and have a USB cable at your disposal.

Some general information

The fact is that most users, even if they are not beginners, naively believe that installation without a special disk is impossible, but this is a fundamentally wrong point of view. over, there are several ways that you can use. The easiest is to use the Internet, if available. You need to go to the official website of the developer of your printer and find the latest drivers for it. Then download them to your computer. And since it’s easy to install drivers on the printer in the future, you will figure it out yourself. You just need to follow the instructions and restart your computer at the end. For now, let’s talk about how to install the printer in one of the ways discussed below. Everything about everything will take no more than 10 minutes.

How to install a printer without a Windows XP disc

Go to the Start menu. If you are using the Windows XP operating system, then you need to go to the “Control Panel” and select “Printers and Other Hardware”. A new window will appear in front of you, here we need the “Printers and Faxes” tab. The next step is to go to the section “Printing Tasks”, “Add Printer Wizard”. In the window that appears, you need to start the installation, for this it will be enough to name the item “Printer Installation”. After that, the process will start, maybe you will still need to click on “Installing a local printer”, if the system suggests it. Since installing a Canon or HP printer is quite simple, and the process is completely similar, you should not have any problems with this. Now let’s see how these actions are performed for the second operating systems.

How to install a printer: Windows 8, Vista and 7

Go to “Start”, here on the right side of the window that opens you will see a tab called “Devices and Printers”, which we need. We go along it and see the button “Add printer”. After that, the process is similar to that described above, with the only difference being that there is a wireless installation option. To do this, you must have either Wi-Fi or Bluetooth. Since it is much easier to install the printer on a laptop in this way, it is recommended to use it. First you need to select the printer connection port, and then its model and go further. You need to come up with a name for the device, after which the installation will start automatically. To check if everything worked out, print a test page. If all is well, congratulations. you know how to install a Canon, HP or any other printer without the necessary software.

Another good method

As already noted, if for some reason the method that we described above does not suit you, then use the alternative option. To do this, go to the developer’s site. This could be Canon, HP, Epson, and so on. You need to find a page with the latest drivers for your device. As a rule, they are located on the support tab, where it is recommended that you follow. Now all that remains is to find the required driver and install it. There is one small nuance here: it is necessary to take into account the capacity (bitness) of the system. So, there are drivers for x32 (x86) and x64 systems. To find out what you need, right-click on “My Computer”, then “Properties” and there you will see the necessary information. Since it is not difficult to install the drivers on the printer further, just follow the instructions of the installer. Restart your computer, and you’re done.

A little about how to install the driver from disk

Some users, especially beginners, cannot understand the disc. In principle, this is quite normal, since there is a bunch of additional software that you are unlikely to use, you must install it. After you insert the disc into the drive, it will start and you will be prompted to select a package that will be automatically installed. You have the choice of partial or complete installation. It is recommended to give preference to the first option, and now we will tell you why. The fact is that by installing the entire package, you will have a lot of superfluous programs, which you will hardly ever use. This is both an instruction for use, and a utility that allows you to view photos, by the way, is not the most convenient, etc. Do not forget to connect the printer and then start it, only after that the installation will be completed. Reboot the system and you can use.

About installing HP printers

It is worth considering the process of installing a device from this manufacturer. This is due to the fact that there are several fundamental points, which can lead to a dead end. In principle, how to install a printer without a disk is clear, but sometimes, even with a driver for HP, it is very difficult to do it. In the first stages, everything is done by simply pressing the “Next” button. When you are prompted to select the type of connection, check the box next to “Via network, network, wireless network”. This is only needed when the installer itself has not found the parameters it needs. Please note that the name may differ depending on the driver. It so happens that you need the printer to be available on several computers in the office. To implement this, you must turn on the device, then the software will detect it, and everything will be configured automatically. If the web search was successful, then everything was done correctly. In the event that the device cannot be found, it is recommended to perform an advanced search by the IP address assigned to the device. This is where we end. It remains only to reboot the system, and you can work. If something went wrong, it is best to contact Support on the developer’s official website. Since it may not be possible to install an HP printer for other reasons, you need to print a log file or send a bug report to the developers.

Some more alternative methods

We have already discussed several good ways above, which are effective anyway. However, if for some reason they do not suit you, then there are several more options for solving the auto products problem. Proceed as follows. Connect the USB cable to the printer and plug it into the port. The search for the printer starts. Then click “The printer that I want is not in the list of found”. A new Dialog box will open in front of you, in which there will be several visual examples of how to register the device address. When you do this, then click “Next”. It so happens that the program displays the following: “There is no driver” or “The driver could not be found.” Do not panic. In this case, it is recommended to first click “OK”, and then specify the correct file search path. Of course, you must first download it from the Internet. The required package extension must be.Inf. Now print a test page and check that the device works.

What else do you need to know?

Do not forget that some printer drivers are installed along with the operating system, but this is only if they are included in this Windows assembly. In addition, it is recommended that you DO NOT forget to update them, as this will greatly simplify your life. Since you can install a printer without a disk, it is better to do this using Windows Update, again, this is only for the software that was installed along with the OS. In the second cases, you need to download a special utility that will display the status of your software on your computer. In simple words, outdated drivers will be automatically updated, but you can do it manually. It so happens that everything seems to work, but the device does not find it. You think that this is due to another “broken” driver, and you start reinstalling it, but the reason often lies far from this. If the USB port has been in use for a long time, then it is quite possible that it has failed. It is for this simple reason that it is recommended to first try to change the socket, and only then reinstall something.

A lot of information has been written in this article that will be useful to you in the event that you do not have an installation disc. Even if there is one, then read this material, because sooner or later it may come in handy. I would like to note that you should disable the antivirus while installing the drivers, but this can not always be done, but only when it blocks content. Well, that’s all on this topic. Now you know how to properly install the printer and make it work even in the absence of software. As you can see, there is absolutely nothing difficult here. Take a few minutes of your time and everything will definitely work at its best.

Actionteaser.Ru. Teaser advertisement

How to install a printer without an installation disc on a windows 8 laptop

Take the HP DeskJet F380 as an example. If you do not know the model of your printer or all-in-one printer, then carefully study the identification labels on the case. You can also find the model on the stickers on the back or bottom of the device.

We open a browser and in Google or Yandex we write “HP DeskJet F380 driver”. You Substituting Your Model.

In most cases, in the first place, or on the first page of the issue, there will be a link to the equipment support page on the manufacturer’s official website.

You can understand that this is the official website at.

It is more convenient to download from the official website for two reasons:

  • There is malicious code;
  • There is also fresh software.

If there was NO link to the official site on the first page of the issue, then you can find it yourself. We set “HP” and immediately select “Drivers” or “Support and drivers”.

In the section “Drivers and downloads” set your model (for example, “F380”) and click “Go”.

Or, you can click Find Now in the “Define a Product” section and follow the instructions in the wizard. (This option is still available for Windows XP / Vista / 7 with browsers: Internet Explorer (IE) 6.0; Firefox 3.6.X, 12.0; Google Chrome).

Select our device from the search results.

Select your operating system from the drop-down list and click “Send”.

In the “Driver” section, click “Download”.

There may be several software options here. For example, full featured software and basic driver. If you need Advanced device and imaging capabilities. download full-featured software.

READ  How To Install A Printer On A Laptop Without A Disk

Run the downloaded file.

The files will be unpacked and the installation wizard will start. Click “Install” and follow the further instructions detailed in the article about installing a printer from a disk.

How to install a printer on a computer without an installation disc on windows 8

Printer setup for Windows 8 can be subdivided according to two pairing paths. This is a manual and automatic way to recognize a device. It is also worth more specifically to dwell on the types of connection. local and network. We will consider all the options for how the printer is installed on Windows 8.

Local and network devices

A local printer is a device that you install and configure at home. You will hardly find it in a large office, since there are more and more network models of such devices being used. If it is equipped with a special bus that is directly connected to the system unit, then there is no need to have problems with setting and pairing. Even a schoolboy can cope with this, since all configuration work is done automatically by the Windows 8 system itself, which will detect and install the device almost independently.

In recent years, this type of printer connection, such as setting up via a Wi-Fi router, has become very popular. If you use the Internet at home through such a device, then you should know that almost all models of modern printing devices are connected to a computer via Wi-Fi. Unlike the wired connection method, in our version you will need to search for a new device.

To do this, first check if the Wi-Fi router is turned on and the corresponding indicator button on the device itself. details about where this indicator is located and how it works can be found in the instructions attached to each specific model. As soon as you turn on Wi-Fi access, you need to find the “Add networks” section on your computer. Directly within its framework, a search for a new connection is made. If access is initially configured correctly, then Windows 8 will immediately detect a new device.

If the search failed, then you need:

  • Check if the copier is on and is not “sleeping”;
  • Check if you have already added it to Windows 8 earlier. If such manipulations are repeated, the system will not add it a second time;
  • Check if there is a Wi-Fi signal and how available it is. That is, even if the devices (printer and computer) are in different rooms, the computer system may NOT pick up the signal;
  • Other devices in the house emitting certain waves can interfere with the connection. These include microwaves, cell phones, and the like.
  • Check how accurately the Wi-Fi router is paired with the computer. To do this, you need to go to the Internet and open any page. It should be fully displayed.
  • As a last resort, you can visit the copier manufacturer’s website. Perhaps there may be certain features that a particular model has.

To install the network model, you need to follow all the same recommendations as in the case of the local option. You just need to take into account that in the network case, you will have to wait a while until Windows 8 detects the device. You should also make sure when looking for a network printer that it has the correct IP address information.

Automatic connection method

If we focus on the automatic method, then we can say with precision that there is nothing difficult here. Windows 8 will automatically detect the device you want, as described above. If a connection is made to a networked device, the system can detect several models at once. You just need to select the one you want (by name) and make Pairing.

During the communication phase, there may be a problem with the driver. It will be required to be installed by the system during the search. The driver can be downloaded automatically, or included on a disk with the printer. If you have NOT installed the driver for connection, then this can be done later, when the system itself requests it by means of a message on the screen.

Manual connection

The manual method is used only in cases where the automatic installation has not been carried out itself. To do this, you need to select the footnote “The device could not be found” in the “Add printer” window. Then the Windows Setup Wizard will start on its own. You will need to identify your device model. If we are talking about a network type of interface, then you need to accurately determine the IP. addresses.

Basically, there are no problems with detecting new devices in the form of a printer on modern models. This can only happen if the device model is already quite outdated. If so, then you will need to go to the website of the manufacturer of this model, and read in detail the description of the installation.

In general, we can say that the manual method of connecting printers in Windows is used very rarely, only in extreme situations when there are no more second ways to solve the problem.

Actionteaser.Ru. Teaser advertisement

How to install a printer on a laptop without a windows 8 installation disc

Printer setup for Windows 8 can be subdivided according to two pairing paths. This is a manual and automatic way to recognize a device. It is also worth more specifically to dwell on the types of connection. local and network. We will consider all the options for how the printer is installed on Windows 8.

Local and network devices

A local printer is a device that you install and configure at home. You will hardly find it in a large office, since there are more and more network models of such devices being used. If it is equipped with a special bus that is directly connected to the system unit, then there is no need to have problems with setting and pairing. Even a schoolboy can cope with this, since all configuration work is done automatically by the Windows 8 system itself, which will detect and install the device almost independently.

In recent years, this type of printer connection, such as setting up via a Wi-Fi router, has become very popular. If you use the Internet at home through such a device, then you should know that almost all models of modern printing devices are connected to a computer via Wi-Fi. Unlike the wired connection method, in our version you will need to search for a new device.

To do this, first check if the Wi-Fi router is turned on and the corresponding indicator button on the device itself. details about where this indicator is located and how it works can be found in the instructions attached to each specific model. As soon as you turn on Wi-Fi access, you need to find the “Add networks” section on your computer. Directly within its framework, a search for a new connection is made. If access is initially configured correctly, then Windows 8 will immediately detect a new device.

If the search failed, then you need:

  • Check if the copier is on and is not “sleeping”;
  • Check if you have already added it to Windows 8 earlier. If such manipulations are repeated, the system will not add it a second time;
  • Check if there is a Wi-Fi signal and how available it is. That is, even if the devices (printer and computer) are in different rooms, the computer system may NOT pick up the signal;
  • Other devices in the house emitting certain waves can interfere with the connection. These include microwaves, cell phones, and the like.
  • Check how accurately the Wi-Fi router is paired with the computer. To do this, you need to go to the Internet and open any page. It should be fully displayed.
  • As a last resort, you can visit the copier manufacturer’s website. Perhaps there may be certain features that a particular model has.

To install the network model, you need to follow all the same recommendations as in the case of the local option. You just need to take into account that in the network case, you will have to wait a while until Windows 8 detects the device. You should also make sure when looking for a network printer that it has the correct IP address information.

Automatic connection method

If we focus on the automatic method, then we can say with precision that there is nothing difficult here. Windows 8 will automatically detect the device you want, as described above. If a connection is made to a networked device, the system can detect several models at once. You just need to select the one you want (by name) and make Pairing.

During the communication phase, there may be a problem with the driver. It will be required to be installed by the system during the search. The driver can be downloaded automatically, or included on a disk with the printer. If you have NOT installed the driver for connection, then this can be done later, when the system itself requests it by means of a message on the screen.

Manual connection

The manual method is used only in cases where the automatic installation has not been carried out itself. To do this, you need to select the footnote “The device could not be found” in the “Add printer” window. Then the Windows Setup Wizard will start on its own. You will need to identify your device model. If we are talking about a network type of interface, then you need to accurately determine the IP. addresses.

Basically, there are no problems with detecting new devices in the form of a printer on modern models. This can only happen if the device model is already quite outdated. If so, then you will need to go to the website of the manufacturer of this model, and read the detailed description of the installation.

In general, we can say that the manual method of connecting printers in Windows is used very rarely, only in extreme situations when there are no more second ways to solve the problem.

Actionteaser.Ru. Teaser advertisement

How to install a printer without an installation disc on a laptop

Hello dear readers of my blog. Have you had any problems installing the printer? Has it ever happened that it was necessary to urgently install the printer, the installation disk would not be at hand? Then here are some tips on how to set up your printer without an installation disc.

Most people assume that a CD is required to install the printer. But this is not the case. It is easy and simple to install your printing device with or without a disk. There are two ways to install a printer without an installation disc, here they are:

Method one

In Windows XP, in the window that opens, click “Control Panel” and select “Printers and Other Hardware” or “Printers and Faxes”.

In Windows Vista or Windows 7, select “Printers” or “Devices and Printers” from the right side of the Start menu.

Click the Add Printer button.

In Windows XP, it is located in the Print Tasks column. The Add Printer Wizard will open.

For Windows Vista or Windows 7, the Add Printer button is located on the toolbar. The Add Printer window opens.

Click Next to start the wizard in Windows XP.

In all operating systems, select “Add a local printer” if you are installing a printer that is connected directly to the computer.

Or select “Add network printer” to add a printer connected to your home or office network.

Windows Vista and Windows 7 also provide the ability to wirelessly connect the printer to a computer via Wi-Fi or using Bluetuth.

Select the printer connection port from the drop-down menu (most likely it will be USB001). Click Next. List the printer manufacturer in the Manufacturer list. Select your printer model from the Printers list. Click “Next”.

In the next window, enter the name of the printer you come up with, or leave the default printer name. Click Next. Windows will install the printer on your computer.

To check the functionality in the window that opens, you can click the “Print Test Page” button. When finished Click Finish. Printer installation completed.

Method two

If you don’t have a driver disc for your printer, don’t worry, just visit the manufacturer’s website (HP, Dell, Epson, Canon, etc.).

Go to the support page, where you can find all the drivers for the products of this company. The address of THESE pages for some manufacturers I posted at the end of the article.

Find and download drivers for your printer model, note their compatibility with your operating system.

Usually the downloaded file is an archive. Unzipping it.

If as a result of unzipping you got a folder with files of different types, find and run the SETUP file. If the downloaded drivers represent one or more executable (extension.Exe) files, run the one that is most suitable for your operating system (usually the OS type is indicated in the file name, for example: Dell_AAY_Vista_x64_PS_sys_en).

Follow the instructions in the installer window and in a few minutes the printer drivers will be successfully installed on your operating system. Please note that for some models, the printer must be turned off during driver installation.

Using one of THESE methods, you will be able to install the printer yourself without an installation disc. Here is the address of the support pages on the websites of some printer manufacturers where you can find and download the drivers you need:

How to install a printer on a computer without an installation disc. How to install a printer without a driver disc

If you do not have a disk with drivers from the printer, you will have to look for the driver on the Internet. This can be done very simply, just know where and how to look. In this article, we will tell you how to install a printer driver without a driver disk, that is, how to find a driver on the Internet.

The Windows operating system provides an opportunity to find out, the so-called “Device Code”, of almost any device in the system, even not identified. With such a code on hand, you can easily find the driver you need. So, in order to find out the special code of the desired device, you should open the “Device Manager”.

READ  Canon Capt USB Device Does Not See Printer

Start the control panel, then type in the search “Device Manager” and in the search results select the Corresponding item.

After that, the “Device Manager” will open. Next, open the corresponding list and find your printer in it. Open the printer properties, for this, right-click on the printer icon and select “Properties”. In the window that appears, open the “Details” tab, and in the “Property” list, select “Equipment ID”.

In Windows XP, the name is different, there the code we need is called “Hardware Code”.

Copy this code (if there are more than 1, then take the first one) by pressing the CtrlC key combination, or RMB-Copy. Now, go to the site https://www.Devid.Info and in the search field enter the copied hardware code and click the “Search” button.

A list of search results will appear, select the very first from the list. The driver download page will open, click on this page the button indicated in the screenshot (it may differ from the one in the screenshot).

After the download is finished, start the driver installation. After installation, restart your computer and enjoy the printer.

Perhaps you will be interested in the programs on the site:

How to install a printer without an installation disc

In most cases, when buying a printer, drivers are provided for it. If you have lost them or scratched the disc, and you need to use the device urgently, then you need to look for a way out of the situation. Many users are starting to wonder how to install a printer without a disc. This is more than real, and there is nothing difficult here. The main thing is to have patience and have a USB cable at your disposal.

Some general information

The fact is that most users, even if they are not beginners, naively believe that installation without a special disk is impossible, but this is a fundamentally wrong point of view. over, there are several ways that you can use. The easiest is to use the Internet, if available. You need to go to the official website of the developer of your printer and find the latest drivers for it. Then download them to your computer. And since it’s easy to install drivers on the printer in the future, you will figure it out yourself. You just need to follow the instructions and restart your computer at the end. For now, let’s talk about how to install the printer in one of the ways discussed below. Everything about everything will take no more than 10 minutes.

How to install a printer without a Windows XP disc

Go to the Start menu. If you are using the Windows XP operating system, then you need to go to the “Control Panel” and select “Printers and Other Hardware”. A new window will appear in front of you, here we need the “Printers and Faxes” tab. The next step is to go to the section “Printing Tasks”, “Add Printer Wizard”. In the window that appears, you need to start the installation, for this it will be enough to name the item “Printer Installation”. After that, the process will start, maybe you will still need to click on “Installing a local printer”, if the system suggests it. Since installing a Canon or HP printer is quite simple, and the process is completely similar, you should not have any problems with this. Now let’s see how these actions are performed for the second operating systems.

How to install a printer: Windows 8, Vista and 7

Go to “Start”, here on the right side of the window that opens you will see a tab called “Devices and Printers”, which we need. We go along it and see the button “Add printer”. After that, the process is similar to that described above, with the only difference being that there is a wireless installation option. To do this, you must have either Wi-Fi or Bluetooth. Since it is much easier to install the printer on a laptop in this way, it is recommended to use it. First you need to select the printer connection port, and then its model and go further. You need to come up with a name for the device, after which the installation will start automatically. To check if everything worked out, print a test page. If all is well, congratulations. you know how to install a Canon, HP or any other printer without the necessary software.

Another good method

As already noted, if for some reason the method that we described above does not suit you, then use the alternative option. To do this, go to the developer’s site. This could be Canon, HP, Epson, and so on. You need to find a page with the latest drivers for your device. As a rule, they are located on the support tab, where it is recommended that you follow. Now all that remains is to find the required driver and install it. There is one small nuance here: it is necessary to take into account the capacity (bitness) of the system. So, there are drivers for x32 (x86) and x64 systems. To find out what you need, right-click on “My Computer”, then “Properties” and there you will see the necessary information. Since it is not difficult to install the drivers on the printer further, just follow the instructions of the installer. Restart your computer, and you’re done.

A little about how to install the driver from disk

Some users, especially beginners, cannot understand the disc. In principle, this is quite normal, since there is a bunch of additional software that you are unlikely to use, you must install it. After you insert the disc into the drive, it will start and you will be prompted to select a package that will be automatically installed. You have the choice of partial or complete installation. It is recommended to give preference to the first option, and now we will tell you why. The fact is that by installing the entire package, you will have a lot of superfluous programs, which you will hardly ever use. This is both an instruction for use, and a utility that allows you to view photos, by the way, is not the most convenient, etc. Do not forget to connect the printer and then start it, only after that the installation will be completed. Reboot the system and you can use.

About installing HP printers

It is worth considering the process of installing a device from this manufacturer. This is due to the fact that there are several fundamental points, which can lead to a dead end. In principle, how to install a printer without a disk is clear, but sometimes, even with a driver for HP, it is very difficult to do it. In the first stages, everything is done by simply pressing the “Next” button. When you are prompted to select the type of connection, check the box next to “Via network, network, wireless network”. This is only needed when the installer itself has not found the parameters it needs. Please note that the name may differ depending on the driver. It so happens that you need the printer to be available on several computers in the office. To implement this, you must turn on the device, then the software will detect it, and everything will be configured automatically. If the web search was successful, then everything was done correctly. In the event that the device cannot be found, it is recommended to perform an advanced search by the IP address assigned to the device. This is where we end. It remains only to reboot the system, and you can work. If something went wrong, it is best to contact Support on the developer’s official website. Since it may not be possible to install an HP printer for other reasons, you need to print a log file or send a bug report to the developers.

Some more alternative methods

We have already discussed several good ways above, which are effective anyway. However, if for some reason they do not suit you, then there are several more options for solving the auto products problem. Proceed as follows. Connect the USB cable to the printer and plug it into the port. The search for the printer starts. Then click “The printer that I want is not in the list of found”. A new Dialog box will open in front of you, in which there will be several visual examples of how to register the device address. When you do this, then click “Next”. It so happens that the program displays the following: “There is no driver” or “The driver could not be found.” Do not panic. In this case, it is recommended to first click “OK”, and then specify the correct file search path. Of course, you must first download it from the Internet. The required package extension must be.Inf. Now print a test page and check that the device works.

What else do you need to know?

Do not forget that some printer drivers are installed along with the operating system, but this is only if they are included in this Windows assembly. In addition, it is recommended that you DO NOT forget to update them, as this will greatly simplify your life. Since you can install a printer without a disk, it is better to do this using Windows Update, again, this is only for the software that was installed along with the OS. In the second cases, you need to download a special utility that will display the status of your software on your computer. In simple words, outdated drivers will be automatically updated, but you can do it manually. It so happens that everything seems to work, but the device does not find it. You think that this is due to another “broken” driver, and you start reinstalling it, but the reason often lies far from this. If the USB port has been in use for a long time, then it is quite possible that it has failed. It is for this simple reason that it is recommended to first try to change the socket, and only then reinstall something.

A lot of information has been written in this article that will be useful to you in the event that you do not have an installation disc. Even if there is one, then read this material, because sooner or later it may come in handy. I would like to note that you should disable the antivirus while installing the drivers, but this can not always be done, but only when it blocks content. Well, that’s all on this topic. Now you know how to properly install the printer and make it work even in the absence of software. As you can see, there is absolutely nothing difficult here. Take a few minutes of your time and everything will definitely work at its best.

Actionteaser.Ru. Teaser advertisement

How to install a printer from disk

Connecting the Printer to a Computer

I’ll tell you using the example of the HP DeskJet F4180. With printers or all-in-one printer from third parties, everything is approximately the same.

If you have an installation disk, please see the article “How to install a printer on a computer without a disk”.

In the article I will tell you using the example of Windows 7. For Windows 8 / 8.1 / 10. similarly.

Installation

Disconnect the printing device from the computer.

Insert the disc into the drive.

Autoplay may start. It must be immediately disabled for all devices for greater security.

Go to the “Start” menu and select “Computer”.

Go to the CD and run the file with the extension. [.Exe]. It can be called in different ways. If there is a request for permission to launch the application (UAC). I allow.

Then follow the instructions of the wizard.

In my case, files are being extracted.

The initial window may (and most likely will) be different. But the essence remains. Click “Settings”.

We are warned that, possibly, during the installation process, additional windows will appear in which it is necessary to allow the execution of all programs. Click “Next”.

We accept the license agreement = Check the box and “Next”.

Connect the device and turn it on.

If at the moment it is NOT desirable to do this (for example, you brought the printer from the cold and you need it to stand for an hour), Check the box and “Next”.

While taking screenshots, an offer of help appeared.

The software is installed. Click “Finish”.

If you, like me, did not connect the device right away, then launch the shortcut on the desktop and connect.

I hope I was able to tell you as much as possible about installing the printer and you realized that the most difficult thing is to wait for the process to complete. There is also a video, please see. If you have any questions, ask in the comments. Let’s try to figure it out together.

Enjoy printing.

How to install a printer on windows 7 without an installation disc

How to install a printer without a disk with original drivers, if it is lost, I will honestly say not very much on the Internet, the device is not an old EPSON Stylus C79, if not difficult to help, the operating system is Windows 7. Sincerely Anatoly.

How to install a printer without a disk and the point here is not even a disk, for example, I have a disk, and on it there are original drivers, only they are for the Windows XP operating system, and the device is not quite old and works well, or rather worked, the operating system I reinstalled also to the new Windows 7, they are not suitable, what to do?

Copyright (c) 2020 HTFI. Copying of information is allowed provided that active links to sources are indicated.