Eliminate software errors
If the tablet does not boot due to hardware problems, then there is a high probability that the user will immediately understand this. The device will be completely inoperative, so even before loading an apple it will not come. If your iPad does not turn on, but only an apple is on, then try to fix the problem yourself. What to do:
- Force restart the tablet.
- Update or Reflash iPad via iTunes.
To force restart the device, press the Power and Home buttons. Keep them squeezed for 8-10 seconds until the tablet turns off completely. Then release the keys and wait for the system to boot. This method helps, even if the system is frozen tightly, or when turned on, the apple is on and the screen goes out.
What if, after a forced restart, the system stalled again during the boot phase? Try to update the system via iTunes while saving the data:
- Connect iPad to Computer with iTunes.
- Force restart by holding the keys until a recovery window appears in iTunes.
- Select the “Update” option.
The program will automatically download the latest version of iOS and install it on the tablet without touching the user’s personal data. If, for some reason, the update process takes more than 15 minutes, the tablet will exit recovery mode. In this case, repeat the procedure.
See also the earlier post on how to turn on your iPad if it doesn’t respond to normal boot. Right here.
Causes of the problem
Before proceeding with self-repair, you need to understand the reason why the tablet does not start. Among the most common reasons:
- Discharging the battery to zero. In such a case, the iPad boots up to the apple and then turns off.
- Operating system problems. If the screen lights up, but the tablet does not work, try returning it to a working state by a forced reboot or flashing.
- Hardware problems caused by mechanical stress, moisture ingress or other negative factors.
What to do if iPad does not turn on after mechanical impact, or the screen goes blank after turning on? It is recommended to contact a service center. Hardware problems can be very different:
- Defective power button. Find the breakage easily. Connect the charger to the device. if the indicator lights up, then the power button is faulty.
- Short circuit with damaged components. It will not be possible to identify the damaged area on your own.
- Liquid penetration into the housing.
Self-repair will result in the iPad being void of warranty, if any. In addition, you can damage other components by adding new problems to the existing ones.
iPad won’t turn on beyond the apple logo
If iPad does not turn on, apple is on, then serious hardware problems may be the reason. However, sometimes the problem occurs due to software errors and other failures that can be fixed without contacting a service center.
If after updating the problem is not resolved, the option remains with a flashing through iTunes. This operation will erase the user’s personal data from the iPad, so make sure you have a backup to iTunes or iCloud.
- Download the file with the latest iOS version for your model.
- Connect your tablet to iTunes.
- Open the device sync page.
- Hold the Shift key on your keyboard and click “Restore”.
- Specify the path to the firmware file and confirm the restore request.
iTunes will delete the content that was stored on the tablet and download the new firmware to the internal memory. The settings will be reset to the factory state, so that all software problems will no longer interfere with the normal operation of the device.
If you can’t restore iPad in normal mode, you can try the same steps in DFU mode. To convert your tablet to DFU:
- Connect iPad to iTunes.
- Turn off your tablet.
- Hold Power, after 3 seconds, hold Home.
- Release Power after 10 seconds while continuing to hold Home.
You need to keep Home until iTunes reports that the device is in recovery mode. Then you can start flashing iPad.
Other publications that will help you reflash iPad:
If the iPad has turned off and does not respond to touch after jailbreak, update, installation of a previous version of iOS, or an apple hangs on the screen, then you need to restore the device. But before proceeding with this procedure, make sure that a backup copy of the data is stored on your computer or in iCloud: when flashing, all information from the iPad will be deleted.
First try to restore iPad Air or Mini in Recovery Mode:
- Connect iPad to computer, launch iTunes.
- Click “Restore iPad”.
- Wait for iTunes to download and install the latest iOS.
If the tablet does not respond to actions and still turns off and does not turn on, then you need to do a recovery in DFU mode. To put the tablet in DFU mode, connect it to a computer with iTunes open, and then hold down the Power and Home keys for 10 seconds. After 10 seconds, release the Power button but hold Home until this message appears:
Recovery is performed according to the algorithm described above. You can also download the firmware yourself and select it by clicking “Restore” while holding down the Shift key.
iPad Won’t Turn On: Diagnostics and Troubleshooting
If the iPad won’t turn on, the problem could be due to both software glitches and hardware malfunctions. With the first, the user can cope independently, but in case of breakdown of individual components of the tablet, it is recommended to immediately contact the service center.
iPhone turns on and off immediately: how to restore a smartphone
Contacting the service center
If the firmware did not help return the iPad Air or Mini to a working state, it still turns off and does not respond to touch, then take the tablet to a service center. Why is it not recommended to do it yourself? Troubles such as moisture, damage to components, breakage of the power button, etc. require qualified repair. It is almost impossible to make it at home.
Do not forget to read the Комментарии и мнения владельцев, there is also a lot of useful information. If there is no answer to your question, and there is an answer to later Комментарии и мнения владельцев, then the answer to your question is contained in the article, respect someone else’s time.
Disconnecting iPhone during a call: finding and fixing the cause
Causes of the problem
If iPad won’t turn on, first try to determine the likely cause of the problem. Problems can arise due to the following factors:
- Software glitch.
- Firmware errors resulting from incorrect update, recovery, jailbreak.
- Breakage of the power button.
- Failure of tablet components.
- Moisture ingress.
- Short circuit.
You don’t need to do anything about hardware problems on your own: it is highly likely that after an unqualified repair, the situation will only get worse. But you can try to cope with software errors on your own.
Flashing the gadget via iTunes
This is a rather aggressive way of dealing with software bugs, but if the iPad “hangs on the apple” and stubbornly does not turn on, then flashing is the last thing you can try at home. The bad method is that you run the risk of erasing all or part of the data on your device after updating the iPad. This will happen if you have not backed up iPad to iTunes in the recent past.
Re-flashing in situations where the iPads freeze when turned on is performed in several stages:
- install the latest version of iTunes on your computer
- connect to the PC iPad, which turns off or constantly reboots on the “apple”
- select the appropriate device type in the program settings and wait for the program to download the latest software version for it
- simultaneously press and hold the power and Home buttons on the iPad. an “apple” will appear on the iPad screen, which will go out
- follow the instructions in the iTunes dialog that opens on the PC screen
The program will prompt you to set up an iPad that is frozen and does not turn on as brand new (with a return to factory settings and a complete loss of all data) or restore the last backup.
Reboot the device
Another way to restore any Apple smartphones, when the iPad does not turn on, the “apple” is on and off “, is to reboot the device. This is done in three steps:
- press the Home and Sleep keys at the same time
- hold them for 10-15 minutes until the “apple” logo appears on the display
- wait for the tablet to reboot
This reboot method restores almost all Apple gadgets in case of any software failure. This method is often used after installing a tweak from Cydia or a jailbreak, after which the iPad freezes quite often.
The very first thing to do, if the iPad does not turn on, the “apple” lights up, then goes out, is to check the state of charge of the device. It is possible that you missed the signal on the iPad screen that its battery is in a low state. At the same time, the charging icon itself may not blink. the iPad will react to a full discharge with a completely black display, on which the apple logo will appear for only a second. Even if the tablet “hangs on an apple”, the cause of the malfunction may be the same.
- connect an iPad, which has an “apple” on and then turns off, to a “native” charger (charging from phones, iPad mini and other Apple gadgets is not suitable)
- wait at least 20 minutes
- start iPad again
The use of the “native” charger is extremely important. Analog chargers are capable of overheating the iPad while it is connected to the network, which leads to various problems in its operation. Incorrectly used iPads freeze when turned on and stop charging at all. IPhone and iPod freeze in the same way.
If after charging your iPad still does not turn on, also check that the charging cable and outlet are working properly. connect some other phone or smartphone to them and make sure that they are charging. If gadgets work with this cable and outlet, please go to other iPad recovery methods.
iPad won’t turn on, apple is on and off
If you are faced with a situation where your favorite iPad does not turn on, the “apple” is on and off, do not rush to carry the device to the service center. There are several ways in which it is possible to restore the tablet to work at home.
Repair for mechanical damage
All described methods are suitable for home DIY repair of an iPad that is frozen and will not turn on, provided that the damage to the device was not mechanical. If your tablet has turned off and no longer boots after it fell, then the reason for the constant reboot of the device may be an interrupted cable.
Additional signs of this are the following interference:
- when turned on, the screen lights up and flashes
- there are streaks and other imperfections in the image before it fades
- the appearing “apple” has a fuzzy white color
If your iPad goes out due to mechanical damage, do not repair the device yourself. Try restarting your tablet or charging it as described above, then flashing the device. If none of the methods helped, and the iPad restarts and goes dead, take it to the service center.
The most profitable option is to entrust the repair of a non-bootable iPad to the Yuda performers. They will restore the tablet, which does not turn on and does not charge, as quickly as possible right at your home:
- solder the dangling cable
- will replace the broken glass of the screen
- carry out professional software installation
iPhone 6/7/8 / X / 12 does not turn on lights apple on and off, how to solve?
Sometimes a glowing apple on the iPhone screen is on, it hangs and turns off, then the screen will be black, it does not respond to pressing. There are quite a few probable reasons for the appearance of this trouble. Today we’ll look at the most common iPhone won’t turn on problems and try to find a solution.
What to do if the iPhone does not turn on and the apple hangs
An easy way to solve the problem is to reboot the device using the Home and Power buttons, which must be pressed and held for 10 seconds. If the reboot does not help, then an update or flashing of the device will be required. To do this, run iTunes on your PC.
Step 1: Launch iTunes on your computer and connect the USB cable (you don’t need to connect the USB cable to the phone yet). Turn off the iPhone while holding the HOME POWER buttons (on iPhone 7, you must hold HOME and. Volume)
Hold down the HOME button and connect the USB cable to the device. Hold the HOME button until the iTunes logo and a plug image are displayed on the device screen.
A notification will appear on the computer screen that the device is in recovery mode
Step 4. Now just click on the Restore button Before restoring your iPhone to factory settings, your computer will need to download the latest version of iOS from Apple’s servers. In this case, the phone will lie with the screen off and show no signs of life. Even with a good fast internet connection, the download process can take 40 minutes or more. If your internet connection is unstable or slow, the process may never complete. Connect to a faster Wi-Fi connection.
The reasons why the apple burns but the iPhone does not turn on
Before referring to the instructions, you need to understand what caused the iPhone to not turn on and the apple on the black screen burns. The following reasons are listed:
Sometimes the battery is discharged, the phone is completely discharged, so an apple appears. Try plugging in your charger and after waiting 20 minutes, try turning your iPhone back on.
The phone freezes when you turn it on, probably a breakdown of the “Power” button. Occurs when disassembling an iPhone.
The device does not boot further than an apple. a problem with the power supply of the device. This often happens with phones during network jumps when charging.
Charging controller is broken, there was a power outage.
Problems with the power supply circuit of the device. The device lay on the charge during a strong power surge.
Problems with the motherboard, while the phone itself may even boot sometimes and even work for a while. True, the glowing apple on the iPhone screen will appear more and more often until it stops starting normally at all.
If your iPhone won’t turn on, even after the one tried above, there remains one more way. restore iPhone in DFU (Device Firmware Update) mode. Follow the link and follow the step-by-step instructions.
There is an easier way to solve this problem, using Tenorshare ReiBoot, one-click you can enter recovery mode and exit recovery mode. Logging in or out can help you solve “the apple is on but the iPhone won’t start”.
Download Tenorshare ReiBoot for Mac or Windows from the official website. Install it. Connect your iPhone on board to your computer (or Mac) using a USB cable.
We launch the program. You will see several buttons, but only one will be active. “Enter recovery mode”. Click on it and wait for a while. You will see the iTunes logo on the display of your iPhone.
Then press the button “Exit recovery mode”. We are waiting for the time it takes to restart your iPhone. Done!
Useful software for iPhone / iPad is always in great demand among users and often ends up in the collection of selected programs. Be sure to take note of the Tenorshare ReiBoot utility. It allows you to enter or exit iPhone recovery mode in the easiest and fastest way. And it will help when standard system methods do not work.
iPhone won’t turn on: apple is on and off
Salon consultants make a helpless gesture: iPhones, which do not turn on after the “apple burns”, are regularly brought under warranty. Buyers do not even know that they can solve this problem on their own. and it will take a minimum of time to fix the problem.
How to Fix iPad Stuck on Apple Logo/Boot Loop without Losing Any Data
The notion that Apple technology is the most reliable is outdated; now iPhones are regular “guests” of service centers. One of the most common iPhone malfunctions is popularly called the “white apple”: the gadget starts up, the “apple” burns on the screen for a long time, then the screen just goes out.
Users, not knowing what to do in such a situation, immediately carry their gadgets to service centers, although they can fix the malfunction with their own hands. without material expenditures or a 45-day wait for warranty repairs. How to get rid of the “white apple”?
How to get rid of the “white apple” if the iPhone is not jailbreakable?
If the “white apple” appears on an unjacked iPhone, the first thing the owner of the device needs to do is to reboot the smartphone and after 5 minutes try to call it. What will such a test give? It is very simple: if the call is in progress, it means that the download of the gadget is interrupted at the very last stage. therefore, it is possible to access the file system of the mobile device. And if there is access to the file system, then there is the ability to demolish the “buggy” applications that provoked the problem of the “white apple”.
You won’t be able to make changes to the iPhone’s file system through iTunes. You will have to use one of the alternative file managers. for example, iFunBox or iTools.
Connect the gadget to a PC and, through the file manager, erase recently downloaded applications one by one (by analogy with tweaks), alternating uninstall operations with checks.
Let’s return to the test with a call: what to do if the result of the experiment is negative and the call on the iPhone with the “white apple” does not go? Such a test result indicates a hardware problem: only technical docks, masters of a soldering iron and a multimeter can fix it with their own hands. If you cannot call yourself a “guru” of mobile technology, you should not open the iPhone and go into the filling. you will only make it worse. Better hand over the broken “apple” gadget to the caring hands of the service center masters.
What to do if iPhone won’t turn on after jailbreak?
Turn off your smartphone.
Hold the volume up button on the side of your iPhone.
With the key pressed, try to start the mobile device.
An iPhone turned on in this way boots without programs from Cydia. If the gadget turns on normally with the volume key pressed, the point is definitely in one of the tweaks.
It will not be possible to establish exactly which jailbreak tweak is problematic. erase the programs one by one (starting with the one that you downloaded last) and after each operation try to start the smartphone in the usual way.
If the smartphone does not turn on even with the volume key pressed, the user has no choice but to jailbreak. We talked about several ways to remove jailbreak from iPhone. in case of the “white apple” problem, it is recommended to flash the device.
Re-flashing. it just sounds scary, in fact, the procedure is quite simple:
Launch iTunes and connect the iPhone to PC with a cable.
Put your smartphone in DFU mode. If this is not done, the PC simply will not see the connected gadget. You can find detailed instructions on how to activate DFU-mode on an iPhone in our article on DFU-Mode.
ITunes will notify you that iPhone has been detected in recovery mode.
Click on the “Restore iPhone” button.
iTunes itself will download and install the new firmware on the gadget. You just have to wait for the completion of the procedure.
Re-flashing in the described way is fraught with the loss of all data. the user will receive a completely “clean” device.
IPhone Freezes When Turning On: Possible Causes
Ordinary iPhone users are often victims of wars between hacker teams. the very ones that develop jailbreaks. For example, the desire of the Evad3rs group to overtake the rest of the teams and release the iOS 7 jailbreak first led to the fact that the problem of freezing Apple gadgets on the logo in 2013 became an epidemic. Due to the “dampness” of the Evasi0n 7 jailbreak utility, smartphones got into a cyclic reboot. they switched on and off sequentially until the charge ran out.
Unsuccessful jailbreak and installation of a “buggy” tweak are two reasons that in the vast majority of cases cause a “white apple”!
However, if the iPhone turns on before the “apple” and turns off, this can be caused not only by a stupid attempt to “jailbreak” the device, but also a malfunction of the gadget at the hardware level. Here are some of the hardware problems that can trigger the appearance of the “white apple”:
Breakdown of the power circuit. Such a breakdown is a consequence of a sharp voltage surge. In order to protect the gadget from power circuit malfunction, you should not put it on charge during a thunderstorm. Battery failure. You can extend the life of the battery if you use only original and high-quality chargers. Owners of old mobile devices are advised not to let the battery drain completely. Faulty motherboard. Such a breakdown does not immediately make itself felt. If with each launch of the iPhone the apple burns on the screen longer and longer, the user should take this as a symptom and start saving money for repairs.
The problem of the “white apple”, finally, may be due to the fact that the gadget is simply frozen. The Apple website has the following scale:
From this illustration, it is easy to understand that the manufacturer does not guarantee stable operation of the iPhone at temperatures below 32 ° Fahrenheit (which corresponds to 0 ° Celsius). If the smartphone is at a temperature of 4 ° Fahrenheit (-20 ° Celsius) for a long time, expect trouble.
The easiest way to get rid of the “white apple” caused by low ambient temperatures is to place the iPhone in a dry, warm place and leave it alone for at least 20 minutes.
If the problem of the “white apple” appeared after a failed jailbreak, you should not hang your nose. In this case, you can fix the problem with your own hands. by flashing your smartphone and removing previously downloaded tweaks from Cydia.
But if the “apple” “hangs” on the iPhone, which did not go through the jailbreak procedure, for the owner of the gadget it is a wake-up call. It is very likely that the iPhone refuses to turn on due to a hardware breakdown, which will require you to contact the service to fix it.
Apple Support Best Practices
If the iPad does not load for a long period of time during startup, the apple is on, you need to do the following:
- Connect the gadget to the PC and open iTunes.
- Perform a forced restart (press and hold the Sleep / Wake and Home keys at the same time).
- Never release the keys after the company logo reappears on the display. the key combination must be held until the recovery mode screen appears.
- On the screen that appears prompting you to restore or start the update process, select the “Update” function. The app must reinstall iOS while saving data.
The Apple app must download the software for the device. If for some reason the procedure takes more than 15 minutes, the tablet will exit the recovery process, then you will need to repeat all the steps again.
The above tips will also come in handy for the owners of “apple” devices, which do not turn on the iPad 2, the apple is on the screen.
Switching to DFU mode
It is worth noting that this is a more extreme way out of the situation when the apple is on, but the iPad does not turn on. There are two methods for entering a gadget into a special mode.
The easiest way to enter a device into DFU is to simultaneously hold down the Home key and the power button for 10 seconds. Then you need to release the power key and continue to hold the “Home” button.
If the apple logo is lit on the display and the iPad won’t turn on
Almost every owner of the popular “apple” tablet at least a couple of times had to deal with failures during the operation of the device. It happens that the iPad does not turn on, the apple on the display is on. The problem is not that uncommon, so Apple Support has prepared several recommendations in case of such complaints from iPad owners.
Causes of the problem
Among the reasons for such failures are:
- interruptions during an iOS update;
- incorrect installation of programs;
- moisture penetration into the device;
- processor malfunction.
How to troubleshoot
There are the following ways to fix the problem when iPad won’t turn on, apple is on:
- Follow Apple Support Best Practices.
- Entering the device into DFU mode.
It’s better to use the first method for a start. If there is no result, it is worth resorting to the second. It should be added that there are two options for entering iPad into special mode. at the end of the article we will consider how to do this.
The apple lights up and the iPhone turns off. what to do
Connect iPhone to computer with USB cable and launch iTunes. Make sure iTunes is up to date. You can check for iTunes updates on Windows by going to Help → Updates, on a Mac, from the Updates tab in the Mac App Store. You can download the current version of iTunes on the official Apple website.
Press and hold the Home and Power buttons on iPhone at the same time for 10 seconds.
Then release the Power button and continue to hold the Home button until iTunes detects the device in recovery mode (about 10 seconds).
In iTunes, click “Restore iPhone” and confirm to start the restore. Important! All media and other device data will be erased. The iPhone will also have the latest iOS version for your device.
In the window that opens, click “Next” and “Agree”.
Note that initially iTunes will download the version of iOS required for the device from Apple servers, and only after that the recovery will begin. You can track the progress of the firmware download by clicking on the button in the upper right corner of iTunes.
It should also be emphasized that after connecting the iPhone to iTunes in DFU mode, nothing will be displayed on the smartphone screen. And only when iTunes downloads the firmware and starts direct recovery, the progress bar will appear on the iPhone display.
After successfully restoring the iPhone, all that remains is to make the initial setup and start using the device.
The apple lights up and the iPhone turns off. what to do
The apple lights up on the iPhone, after which the smartphone turns off. the wording of one of the most common iPhone problems. It can appear really suddenly. Many users who have encountered a problem say on our forum that their smartphones turned into “brick” after making a call, removing some applications from the device or other very standard actions. Whatever reason brings your iPhone to a similar state, this guide will help you solve the problem.
What to do if iTunes does not detect iPhone in DFU mode
There are several reasons why iTunes may not detect the iPhone in DFU mode, ranging from the old version of iTunes to a technical malfunction. Before going to a service center or starting repairs on your own, it is recommended to check the integrity of the USB cable and USB port. Ideally, you can try to connect iPhone to iTunes on another computer using a work cable.
Also, the problem might be an iTunes error. In this case, iTunes must be reinstalled, but do it correctly by removing the program components in the following order:
- Apple Software Update.
- Apple Mobile Device Support.
- Apple Application Support (32-bit).
- Apple Application Support (64-bit).
An extensive guide on how to properly reinstall iTunes is available here.
If nothing helps to determine the iPhone in iTunes in DFU mode, then there is a high probability of a technical problem. In most cases, the battery is the culprit, and after replacing it, the iPhone starts functioning normally again. For detailed instructions on how to change the battery yourself on various iPhone models, visit our website:
But be warned, there may be a problem with other iPhone components, so the best way out of this situation is to go to a service center.
Reset iOS settings
If the iPhone does not turn on periodically (out of 5 times no more than 2-3 freezes on the Apple logo), then before contacting the service center and experimenting with the DFU mode, it will not hurt to roll back the operating system parameters to the “factory” state. The procedure will not take even 10 minutes, and even a backup copy is not needed either: the content stored in memory will not disappear anywhere.
Reset starts from the “Settings” menu “General”. The desired section is at the bottom of the list, right above the “Turn off” button.
After the transition from the actions that appear, it remains to select “Reset all settings”, enter the PIN code (verification via Touch ID or Face ID is not available) and wait until iOS clears the parameters and restarts the iPhone.
Often, a reset is already enough to get rid of freezes and technical problems when an apple blinks or the iPhone screen starts to blank out unexpectedly. But even more often, you can’t even look into the “Settings”. iOS does not even load. Therefore, it’s time to move on to universal methods.
IOS Restore or Update via iTunes
ITunes. Apple‘s media combine. is often viewed with distrust due to its button-cluttered interface and confusing navigation. In fact, the tool: it will help you filter both the entertainment media library, and will help with the recovery of a locked or non-working iPhone.
The only thing you have to deal with is downloading and installing the latest version of iTunes, and connecting your iPhone to your PC using a USB cable. Next. go to the parameters of mobile technology, presented in the “Overview” section.
It is advisable to prepare an up-to-date backup copy of the contents of the internal memory at the bottom of the interface before starting the procedure. Formally, no data can disappear when the iPhone is restored to work. But extra safety net won’t hurt. Backups are generated and stored: either on the hard drives of the computer, or in the iCloud cloud storage in the iOS settings.
Regardless of the choice, you will have to return to the top of the interface and click on the “Restore iPhone” button. iTunes will automatically download the update files and transfer the latest iOS version to mobile devices in the background. The procedure takes on average up to 30 minutes (this is due to the preparation and preliminary unpacking of files before updating or restoring). After several reboots, the problem with the “iPhone does not turn on, the apple is on and off” will disappear.
IPhone does not turn on (apple burns and goes out): from reasons to reset
Hello everyone! Today I ran into a problem. the iPhone does not turn on, the apple is on, and the smartphone itself just goes out. at first it seems to turn on, then it turns off and it goes out. And so constantly when you turn it on.
Apple mobile technology rarely encounters unsolvable technical problems and errors. But the problem with the iPhone not turning on or hanging on the apple logo has already become overgrown with legends and has become a widespread phenomenon. And that means it’s time to figure out the details and find out why the iPhone does not turn on, the apple burns and goes out, and how to save mobile equipment using iTunes.
Reasons why the Apple logo is lit up and the iPhone won’t turn on
- System crash caused by software problems or recent updates to the iOS operating system. In some situations, the problem also appears when interacting with unsupported characters. we are talking about hieroglyphs sent via iMessage, which on some versions of iOS lead to an emergency shutdown of the iPhone.
- Battery discharged or defective.
- The power adapter and charging cable are damaged and are not able to charge the iPhone even up to 5%, which is why the apple logo does not disappear.
- Mechanical damage: iPhone dropped and constantly reboots, remained under water for a long time, or lay for several hours in the sun or in the cold.
IPhone Recovery via Third Party Software
Unofficial software tools handle iOS problems like iTunes. And sometimes they offer even more: an intuitive interface, a predictable course of actions and recommendations for beginners.
The same diagnostic service ReiBoot, adapted for computers with Windows and MacOS, offers in a matter of moments:
- Run DFU mode without holding the buttons on the iPhone case, but through a special menu in the interface.
- Return to standard mode or go to a special section with “Support”. where tips appear for situations when an apple is on or mobile equipment does not respond to pressing.
It is easy to interact with ReiBoot: the developers first suggest connecting the iPhone to the computer using a cable, and then. in the interface that opens. select “Enter recovery mode”.
How you have to proceed further depends on the reason for the appearance of the non-fading logo and the version of the iPhone (4, 5S, 6, 6S, 7 or newer). But with a 99% probability, ReiBoot will first download the stable version of iOS from the official Apple servers (either new, or the current one, but “reset” to factory settings).
Then it will automatically start the update process. The procedure takes from 15 to 30 minutes, depending on the speed of the Internet, the amount of space occupied on the internal memory of the iPhone and the number of errors found in iOS.
Apple does not turn on and burns on iPad 4, 3, 2, 1
Often, iPad 4 owners can face a problem when the tablet is frozen on an apple. What to do in such a situation, and why this malfunction occurs?
- We’ve been fixing Apple for 5 years. thousands of satisfied customers
- Repair with you. We manage to do 72% of repairs in 35 minutes
- Free diagnostics
- Original spare parts
- Guarantee for all works
IPad Repair Cost
Important! The price of repair already includes the cost of spare parts and the cost of work.
iPad won’t turn on, apple is on and off
- oneWe diagnose the device brought by you or our courier free of charge.
- 2We make repairs and also give a guarantee for newly installed parts. On average, repairs take 20-30 minutes.
- 3Get a working device yourself or call our courier.
Craftsmen who constantly encounter a malfunction when an apple burns, but the iPad does not turn on, distinguish three main reasons for the breakdown:
- software crashes;
- damaged firmware;
- hardware failures caused by moisture, drops, or impacts;
Many users claim that their iPad 1 can work without reboots for a month or two. Of course, during this period, the device receives a colossal amount of data that needs to be “digested”.
As a result, during a forced reboot, a nuisance often occurs in which an apple burns. In this case, you can restore performance in several ways:
- forced reboot;
- recovery via iTunes;
- flashing device.
The first method in many cases allows you to return the device to normal mode. But sometimes a forced reboot only makes the problem worse.
iPad stuck on apple and won’t turn on. What to do?
If, after restarting, the device hangs as before, or does not turn on at all, then try connecting it to the computer and restoring the system through iTunes. When this does not help, you should change the firmware. You can do this yourself, but it is better to entrust this laborious and responsible process to the masters of our Apple technology service center. Here, only verified and licensed software will be installed on the tablet.
But there are situations when the flashing does not bring a positive effect, but the malfunction remains further, the iPad does not turn on, the apple burns and goes out. This testifies to only one thing. there was a hardware failure and damage to key components of the device. You could inadvertently hit the tablet on an object, or the gadget could fall. All this often leads to damage to cables, microcircuits and even the motherboard.
How to fix an iPad 3 tablet in this situation? Most often, if the iPad 2 hangs on an apple, it indicates a failure of flash microcircuits or a processor. It is unlikely that it will be possible to restore these components on their own after damage, so it is necessary to completely replace them. This is a rather complex process that can only be performed by a qualified employee with the necessary set of tools.
But the biggest danger to the electronics of the device lies in moisture. The ingress of water leads to oxidation and corrosion of the contacts and microcircuits of the device. In addition, attempts to start the tablet after getting wet can end up with serious consequences for the device, because moisture, as an excellent conductor, leads to such a phenomenon as a “short circuit”. In this situation, the user will not fix anything on his own, you need to immediately contact our Apple repair shop.
Broken charging connector
Do not overdo it when you want to help an electronic friend.!
Excessive mechanical stress on the tablet destroys both the keys and the power ports. damaged or deformed pin-connectors are not restored, but change along with the connector. The situation becomes more complicated if the tablet has fallen. several cracked parts will have to be replaced at the service center and, of course, not for free.
Why can’t my computer see my HDMI TV? The answer is here.
- blow off the dust;
- clean the connector with the supplied paper clip;
- try charging again;
- carry out the procedure for non-standard cleaning of the power socket constantly, for prevention.
The design of Apple devices does not provide for the use of non-original accessories. fake chargers violate the integrity of the electrical circuit and cause a violent reaction, up to the internal combustion of individual components.
A stingy or incredibly cunning user always pays twice. Do not try to cheat the system and save money when buying a charger, the risk is not justified!
Remember a simple truth. the key to long-term use of a mobile device: correct operation!
ALL iPADS: HOW TO FIX BLACK SCREEN / STUCK APPLE LOGO / BOOT LOOP / WON’T RESTART
IPad won’t turn on. What to do?
The secret of the high popularity of Apple technology is guaranteed reliability and high quality of products: in the mobile device market, a combination of two factors bypasses competitors without a direct collision, but is the end user so protected? And is there any salvation from malfunctions at home?
The iPad went out in the most interesting place, does not respond to clicks, requests and outright threats? Stopped functioning due to flashed firmware and system errors? There are enough reasons for the death of the tablet. it’s time for an emergency recovery!
Errors in the system
Software glitch is a popular cause, but can be easily resolved at home. Take advantage of:
- hard reset using the Home and Power buttons held down for ten seconds;
- reinstalling the operating system along with iTunes.
The methods are effective in all situations related to the software part of Apple tablets. it saves both after updating with errors and during operations with the file system.
Doesn’t turn on after jailbreak
Jailbreak is an operation officially unsupported by Apple representatives that issues superuser rights and opens access to the file system.
Have you empowered your device but your strategic improvement plan has failed? There is a white apple and a disconnected wire symbol on the screen, but plugging into an outlet and iTunes does not help?
Use two methods:
- hard restart iPad. simultaneously hold down the Home and Power buttons for ten seconds. After discharging, when the screen turns off completely, the device will turn on automatically;
- restore the tablet to work by reinstalling the operating system using iTunes, after turning off and connecting the iPad to the PC.
iTunes. navigator and organizer of Apple mobile devices, media player and guide to the world of music and movies.
The process of restoring the tablet takes several minutes, the main thing is to act according to the algorithm:
- download the latest version of iTunes from the official Apple website, install and run the utility. Next, connect your iPad to your computer using the original USB cable;
- put the device into recovery mode by holding down the Home and Power buttons. When the screen turns off, release Power, leaving your finger on “Home”. the rescue inscription “Restore” will help determine the success of the operation;
- downloading the update, unpacking and installing is automatic, the progress of the recovery is shown by a thin white bar;
- the procedure will help out even in emergency cases, however, it will leave without the stored data.
Defective power button
To recognize the mechanical wear of the Home key, you can use a simple trick. connect the tablet to the charger. If the usual energy recovery indicators instantly light up on the screen, it means that the problem is associated with a hardware malfunction and the button that does not work can only be repaired.
In the course of healing a tablet fallen in battle, especially without expert knowledge, start with basic operations. first, check the battery charge by plugging your mobile device into an outlet. Leave skepticism aside. carelessness often leads to more serious consequences!
ALL iPads Fixed: Not Rebooting, Black Screen, Won’t Turn On (2 Ways)
If the device is discharged, the corresponding indicators will light up on the screen.
An unexpected meeting of a liquid with a tablet is a problem that can be largely solved only in service centers with the help of technical specialists. You can only partially restore the device on your own by unscrewing the gears and drying the boards hidden behind the protective cover.
The operation is risky. the sharp oxidation process is irreversible, and also leads to complications and expensive repairs:
The situation is controversial. in some cases it is better to immediately contact Support, sometimes light drying of the device helps.
- unscrew the screws-bolts, remove the back cover and the battery and inspect the “filling” for defects;
- methodically remove moisture from boards, floors, contacts and loops;
- dry all parts separately, either with a compressor with compressed air, or! risk! a hairdryer, controlling the temperature;
- put all the parts back together by connecting all the parts and tightening the bolts tightly.
Why your iPad won’t turn on and what to do in these situations?
Fashionable “apple” technology has long won trust in the market and has become a kind of symbol of reliability. However, unfortunately, even expensive, well-thought-out gadgets manufactured by Apple are prone to breakdowns. Why iPad won’t turn on and how to deal with different types of malfunctions?
This is one of the most common reasons why the iPad won’t turn on at all, or it turns on, but the screen doesn’t show any signs of life. The only way to deal with this situation is to reinstall the operating system, that is, to roll it back. Often, in order to correct the situation, it is enough just to hold down the Power and Home buttons for a few seconds. If everything went well, the cherished apple will appear on the display, and soon the iPad will turn on.
Broken charging connector
Defining this problem is a little more difficult. If you have problems with the charger connector, nothing will happen when you connect a fully discharged iPad to it. True, there is a possibility that the connector is simply dirty, and this is what interferes with normal charging. Nevertheless, its cleaning should be entrusted to a specialist.
Power button problems
It also happens that for some reason the button responsible for turning on the device fails. It is very simple to make sure that the cause of the malfunctions lies precisely in this. All you need to do is connect your iPad to the charger. If the charging indicator lights up on the screen, then the problem lies precisely in the power button.
A fairly common reason why iPad won’t turn on is moisture getting inside the device. Sometimes you can fix the situation by disassembling the gadget and drying all its parts for several days. However, it would be much more logical and safer to take it to a service center to clean the board. If this is not done in time, moisture can oxidize the board, and subsequent repairs will be much more expensive (perhaps the device will not be repairable at all).
Surprisingly, it is short circuits that are often the reason why the iPad does not turn on. It would seem, how can they happen at all? Subject to all the rules for operating the gadget really nothing. However, say, when using a non-original charging device, an electrical impulse can hit several components at once. In this case, the only way out is to replace all damaged items at the service center.
The following situation is quite common. IPad does not turn on: the apple is on, and nothing else happens on the screen. The reasons for this can be different. The first and the simplest is software problems, which can be solved by flashing the gadget using iTunes. But it is also always possible that the reason for this behavior of the iPad is a malfunction of the internal elements of the device. in this case, again, you cannot do without the intervention of specialists.
Why iPad Mini doesn’t work?
The reasons why the iPad Mini does not turn on completely coincide with those that are typical for its “older brother”. standard iPad. Therefore, the measures that need to be taken remain the same: an attempt to charge the device or restore the system using iTunes tools, or contact an Apple service center.