iPad won’t connect to WI-FI

Table of Contents

Ambulance

The most logical step if the iPad stopped connecting to WI-FI is to restart the connection. If unsuccessful, do the same procedure with the tablet itself. After that, the turn of the more severe measures comes:

  • Removing the network. Go to Basic settings, select the Network item. Click on the desired network, click on “Forget this network”. Try to connect to Wi-Fi again.
  • Reset network settings. In the Settings section, select Reset (at the end of the list) and select “Reset network settings” from the five options. The method is effective, but there is a drawback. saved passwords will disappear.
  • Region change. An unobvious method is to change the country (section of network settings). Sometimes setting the US tablet by the region helps to solve the problem.

Starting with the iPhone 4s, the developers have implemented the energy-saving Broadcom BCM4330 chip. It often leads to the fact that WI-FI does not work on the iPad. The only solution is to reset the settings, the procedure for which is described above.

Router problems

If the iPad connects to all but one network without problems, the reason is in the specific router. The first and important fact is that devices with the Astheros chip conflict with Apple tablets. In any other case, it is worth rebooting the router, maybe even several times. Because of this, the data transmission channel will change, the connection will most likely be established.

Having connected the router to the computer via a USB cable, you can do the following:

  • update the ip-address;
  • change the encryption type. wep to wpa / wpa2;
  • increase the brightness level (settings);
  • update the software version (if there is an upgrade).

The nature of the problem

Receiving a Wi-Fi signal usually occurs in a matter of seconds. the user barely has time to click on the icon in the notification shade. If the connection did not happen, first you need to check the presence of the network itself. The scheme of actions is simple. go to Settings, the Network section. The list of available ones (which the iPad “sees”) should be headed by the network to which the request is made. Two options are possible here:

  • The network is in the list, the connection is not established. If the network is protected access, you must click on it and select the line “Forget this network”. Reconnect.
  • The network name is missing. There is a high probability that the problem is in the router or weak signal range.

Hardware issues rarely lead to iPad not seeing Wi-Fi. more often a software bug. The situation is different with the iPad mini. its design is more fragile, mechanical damage on impact can affect the reception of the signal of wireless networks.

When repairs are needed

If iPad has been severely bumped or damp in the case, repair may be required. Damage is most often caused by the module harness, antenna malfunction, or corrosion of the connections. In this case, other malfunctions occur, uncharacteristic of software errors.

Checking the router

What can you do if none of the above remedies helped restore the iPad Wi-Fi signal? It’s time to check the router, two fatkors can create a situation that Wi-Fi does not work on the iPad.

If the operating frequency is set to 802.11n, the iPad will not connect to the network. this applies to older models. The current ipv6 protocol will lead to the same. It is enough to change these parameters that the iPad was able to connect to Wi-Fi.

iPad does not see Wi-Fi

Apple gadgets are well-known for their high quality of work. failures in it are extremely rare. But sometimes users are faced with an unpleasant problem. the iPad does not connect to WI-FI. Simple actions with the iPad itself or a router can help.

Connection

First you need to try to connect to your network, for this:

  • Go to “Settings”.
  • Find the item “Wi-Fi”.
  • Select the desired network (enter the password if needed).

If everything is done correctly, a checkmark will appear next to the name of the access point. it means that everything is fine and you can work. Also, a successful connection will be indicated by the Wi-Fi icon in the upper left corner.

But it happens that your iPad does not see Wi-Fi. Then we proceed in this order.

Mechanical breakdown

Remember if the tablet has been dropped recently or if the tablet has been lying for a long time in a damp room. Such conditions could lead to the failure of the part of the tablet responsible for the connection, and here you already need to contact the service center for diagnostics and repair.

Other reasons

If after all the steps you still could not connect to the Internet, the cause of the problem may be of a completely different kind.

Settings on the device

After an unsuccessful attempt to connect, go back to the network selection menu, opposite the name of your access point, press the “i” button, and in the next menu, click on “Forget this network”.

If this did not help and the Internet via Wi-Fi still does not work on the iPad, we will resort to even more radical methods.

Go to the settings, find the “Reset” item (you may need to enter a password here) and click the “Reset network settings” item. This action will not only reset the settings of all networks, but also delete all passwords for them from the gadget’s memory, so this is an extreme method.

Distance to router

First, check if the gadget can reach an access point, that is, if the tablet is close enough to connect to the Internet. Usually, if the network is visible in the settings, but the signal level is only one division, then the iPad does not catch Wi-Fi well and cannot connect.

Please note that for tablets and smartphones, due to the smaller size of the case, the antenna picks up the signal worse than, for example, a laptop.

Router check

Further, of course, you should check the router itself and its Internet connection, because even without an Internet cable connected, the router will still beep.

Use another device to check the connection. Just in case, restart the router (unplug its power cable and plug it back in), update the software on the tablet and reboot it too.

The hotspot is functional, but Wi-Fi is not working on the iPad? Go ahead.

iPad won’t connect to Wi-Fi

Have you come to a cafe, picked up a tablet to surf the Internet, but still couldn’t connect iPad to Wi-Fi? A similar situation can arise anywhere, including at home! You try to connect to the wireless network over and over again, enter the password, but the connection is not established. What to do in this case, how to fix problems with connecting the Apple tablet to the network. we will tell you in this article.

Problems when connecting a tablet with Wi-Fi, like most others, can be hardware or software in nature. In order not to frighten you right away with repairing your iPad, let’s look at the most common causes of software-type problems. At the very beginning, make sure that the iPad is within range of the Wi-Fi router, and other devices are successfully connecting to it. To do this, try connecting a laptop, phone, or any other equipment to the network. If this succeeded, and at the same time the data transfer is stable, then the problem with the tablet has been confirmed. Try also to connect iPad to Wi-Fi in other places, it happens that connection problems are present only in one place, and this is already an important point for diagnosing the problem.

If the tablet is within range of the router, while other devices connect to it without problems, you need to try resetting the wireless network settings. To do this, delete and re-create the connection, re-enter the password, as a last resort. turn on and off airplane mode, or restart the device. In addition, an important point is the country in which the iPad was bought. If it was brought from the USA, then the reason for the connection problem may easily lie in the discrepancy between the standard settings of the router and tablet. The fact is that in Europe and Russia, 13 channels of frequency ranges are allocated for the Wi-Fi wireless network, and in the USA. only 11. In this case, setting the default country in the router settings. the United States of America (if you have access to the router settings).

If none of the above manipulations helped, and the iPad stubbornly does not want to connect, or does not even see Wi-Fi networks, it is most likely a purely hardware breakdown. This happens when the tablet falls, the case is deformed, unprofessional repair or replacement of the screen, etc. Whatever the breakdown, in the Apple Pro service center and St. Petersburg, you can get free diagnostics and repair of the iPad, or its setting. We assure you that visiting a service center to quickly fix the problem is a much easier and more justified option than repairing your iPad yourself! Visit us today and see for yourself!

Resetting network settings

If iPhone won’t connect, resetting network settings may help. How to connect Wi-Fi using factory reset:

  • Open the gadget, go to its “Settings”, go to “General”, then “Reset”.
  • Press the button “Reset network settings”.
  • Confirms the selection with the “Reset” key.

Next, the connection status is checked again, and if the network is unavailable, then you should look for the problem in the router. Usually, it is easier to check the operability of the router. they ask other people to connect with their gadgets or enter a password from a laptop, computer or tablet.

How to restore settings

If you lose data previously saved on the iPhone 5 or 5S (there is no Wi-Fi connection on these models most often), you should back up the information. In this regard, a special cloud storage from Apple was created.

On any phones, not necessarily this company, it is possible to make a backup. But the step-by-step instructions below are suitable for all types of iPhones, not only phones, but also laptops. Most of the information is saved automatically.

First you need to go to the settings, go to the backup in iCloud. To enable this feature, you need to go to “Storage and Copies”. The iPhone system immediately writes that data from folders and files, contact information, settings are automatically copied when creating a connection to a Wi-Fi network. Then the key for creating a copy is pressed. It is just as easy to retrieve data after the backup has been created.

This question is of interest to people who have lost their gadget or after theft. But the procedure for recovering lost data is quite complicated, especially if the loss was a long time ago.

Reconnect to find the network

If the Apple gadget stubbornly cannot see the network, and the reason why this happened is unknown, you should disconnect and connect to the Internet several times. This connection method can solve the problem if the 4 series gadget cannot connect to an existing authorized network. Newer phone options should be handled differently.

If the iPhone 5, iPhone 6s, iPhone 6, iPhone 5s or another version can recognize the network, but the connection failed, you should perform the following manipulations:

  • Enter the phone menu, and then go to the Wi-Fi network settings.
  • From the proposed ones, select a network that is visible to the device, but there is no connection. Then the button “Forget this network” is pressed.
  • Next, there is a search for other Internet channels and a new connection to Wi-Fi is made.

If the phone refuses to find other networks, you need to think about the fact that the problems are different.

Router problems

The router may refuse to provide access to the network, writes an error and does not automatically connect the device to the network for two reasons:

  • Incorrectly configured at the very beginning, so there are constant failures.
  • Malfunctions in the Wi-Fi module.

To change the settings of the router, you need to understand this device. If you have not previously encountered such breakdowns and installations, it is recommended to consult with the wizard. Those who can understand the settings of the router should take the following steps:

  • The router is rebooting.
  • Its settings are reset.

How to Fix Unable to Join Wi-Fi Network Error on iPhone and iPad after iOS 13/13.5?

This button is used to collect router settings:

  • The encryption information changes: if the WPA2 / WPA protocol is installed, it changes to WEP.
  • The user region is changed to America.

How else to fix the problem through the settings of the router, see the following

If you follow all the above steps, you can connect to Wi-Fi Apple iPad, iPad mini 4, as well as other well-known gadgets of all models. But even this method may not help in connecting to the network. In this case, you should think about configuring the module.

Password error

Quite often, iPhone 7 and other smartphone models cannot connect to the network due to the fact that their owners made a mistake when entering the password. This is the most common mistake when people are in a hurry, make mistakes in the input language, in the number of characters.

READ  How to transfer photos from ipad to computer

How to find out the password for your Wi-Fi is described in the following

You should repeat the entry once more, fill in the appropriate fields with greater care. This occurs if the password has uppercase letters, numbers, and other characters. If this does not help, you can go to the router settings and enter a different password.

To make sure if this is a router or gadget error, you should check the presence of a network on other devices, it can be a laptop, tablet.

iPhone won’t connect to Wi-Fi: what to do, how to connect?

Almost every public institution and home has a Wi-Fi network to which visitors can connect. But it happens that iPhone Wi-Fi does not see or gives an error when connecting. The error can be fixed on your own if you understand the reasons why the iPhone does not connect to Wi-Fi.

Why iPhone won’t connect to Wi-Fi and how to fix it, see the following

Folk remedies

However, if you have an old iPhone 3GS or iPhone 4 with a broken screen and a non-working Home button, then you can risk his health and do one of the methods of temperature exposure that have been tested by thousands of users. Namely. heat the smartphone with a hairdryer to a critical temperature and then restart, or vice versa. freeze the iPhone in the refrigerator (and this is not a joke).

Sometimes this has a positive, but temporary effect and confirms the presence of hardware problems.

On iPhone or iPad (reboot, “forget network”, reset network settings, flashing)

Naturally, the first step is to take a full range of measures to eliminate a possible error in the iOS settings, moving through the list from the simplest to the most complex:

Turn Wi-Fi off and on in Control Center, restart your device.

If the iPhone or iPad does not connect to the Wi-Fi network correctly, try to “forget” the network. To do this, open the Settings application, go to the Wi-Fi section and click on the “i” icon next to the signal strength icon.

If this does not help, reset the network settings. To do this, go to the path: Settings → General → Reset and click on Reset network settings.

In some cases, you can use the Software Restore procedure. How the Software Update differs from the Software Restore, as well as how this process is performed, we described in detail in this material.

Eliminate external causes (interference, covers)

First of all, you should make sure that there is no interference with the signal. If there is no microwave oven between the router and the smartphone, in which there are several working radiotelephones, then it should pass unhindered. Most often, the problem lies in covers and bumpers, which were made by shortsighted craftsmen from metal materials. removing such an accessory can remove the issue of unstable Wi-Fi connection.

iPad WiFi Problem And Fix, How To Fix WiFi Issue on iPhone or iPad

On a router (router)

Reboot your router. No matter how trite it may sound, restarting the router in some cases really helps to improve the operation of the wireless network on iOS.

Change the encryption method (this is often the reason iOS devices don’t want to connect to Wi-Fi).

Reset your router (router) to factory settings.

Wi-Fi not working on iPhone or iPad: possible solutions

Among all the problems faced by the owners of mobile gadgets, poor performance or complete lack of Wi-Fi connection is one of the most common. Usually the fault is due to incorrect user settings of one of the devices (router or smartphone), but sometimes it is not possible to resolve this situation without intervention at the hardware level.

Below we will consider the most effective methods of Wi-Fi treatment in terms of the ratio of the total number of attempts to successful ones. That is, it is these methods that most often help users solve the problem with this type of wireless connection.

Contact the service center

If the iPhone still refuses to connect to the Internet, then with a high degree of probability there is mechanical damage or a factory defect of the corresponding module. Such a problem should not be eliminated on your own at home and it is better to contact a service center.

ipad, connect, wi-fi

Why iPad won’t connect to Wi-Fi: reasons and solutions

Built-in Wi-Fi is included with every iPad model. This order of things is due to the widespread popularity of wireless networks. In addition, being tightly tied to the provider’s cable, the iPad, in essence, ceases to be what it is. a mobile gadget. Therefore, connecting to any of the nearby Wi-Fi networks is an absolute must.

Some users have difficulty connecting and complain that their iPad is unresponsive to the network, not understanding why this is happening. In our small note, we will comment on the reasons for this behavior of the device and give recommendations on how to fix this problem.

Watch a video about Wi-Fi connection problems on Apple smartphones (instructions are also suitable for iPad):

Source status control

How do I check my router? First of all, find out if the LEDs on the front panel of the router are on. Pay special attention to the one with the Internet icon (it may look different on different models, so take a look at the instructions).

If the lights are off, it means that you forgot to plug the router into the outlet or did not connect the provider’s cable. Do this and try to connect again.

Nothing comes out? Sit down at the computer, open the router settings page in the browser and check if all the connection options are set correctly. These parameters are described in the instructions of your network provider. It is best to reset all settings before reconfiguring the router. To do this, there is a special button on the router case (usually labeled “Reset”).

If after all the above steps, access to the Internet appears and disappears, try wandering around the house with your iPad. If the reception is better in one place than in another, then the network signal is not strong enough.

Interference can also be the cause of an unstable connection. You can also experiment with router channels. this is roughly the same as receiving ranges. On one range, the signal can be heard perfectly, and on the other it can be barely noticeable. If many neighbors use the same channel, then switching to another band often solves the problem.

By the way, if the Internet doesn’t work, isn’t it time to pay according to the tariff plan? This is a joke! We will assume that you are neat.

A few words about the reasons

There can be several reasons why iPad won’t connect to home Wi-Fi. Some of them are serious, others are not so. Some are real, while others are imaginary and associated with non-compliance with the conditions for connecting to the network.

IPad connection diagram to Wi-Fi in the following picture:

iPad Not Connecting To WiFi? Here’s The Real Fix.

Why won’t iPad connect to Wi-Fi? Here is a rough list of reasons:

  • Failure of Wi-Fi of the iPad module due to its breakdown.
  • Not activated router or weak signal strength.
  • Outdated or inappropriate software on the router or wireless adapter.
  • Failure to comply with the rules for connecting the device to the network.

What to do if the gadget does not connect to Wi-Fi due to the described reasons? The defective iPad will have to be taken to a workshop. The router can be checked on the spot. You can check the Internet or the Apple website to get the correct version of the software. You just need to learn the connection rules. They are described in the instructions for the device. You need to read it carefully, and not poke your fingers at the buttons at random. Moving on!

IPad Connection Control

iPad won’t connect to Wi-Fi. a fairly common mistake. After setting up the router and finding a point of satisfactory signal reception, the best thing to do is to reconnect to the network. To this end, open the settings panel on the gadget and do the following manipulations:

  • Go to the Wi-Fi section.
  • Choosing the network of our router.
  • Click on the button “Forget this network”.
  • Reboot both devices (router and iPad).
  • We try to connect again, having previously filled in the connection parameters with Wi-Fi.

If that still doesn’t work, try resetting your network configuration. Go to the “Settings” of the gadget, then to “General” and click on “Reset network settings”.

In theory, everything should work. If not, then you need to think about another option. It may so happen that the iPad software is outdated, so the gadget does not connect to Wi-Fi. Need to update it via iTunes.

If that doesn’t work, make sure your iPad is not an American “gift”. Models released in the USA require additional configuration, since they are not intended for operation in domestic networks. To solve the problem, in the wireless settings on the router, you will have to change the region to United States.

Hope the article was helpful and helped in fixing internet connection problems. If you still have questions, write in the Комментарии и мнения владельцев or online chat. Let’s figure it out together!

DNS name server change

For safe use of DNS services, it must be properly configured for your source. It is easy to independently change the name, it follows a certain algorithm of actions:

  • Go to the “gear” of the device and select the section of the wireless connection Wi-Fi.
  • Dedicate your web hotspot.
  • Scroll down the information about the router and click the “DNS Settings” cell.
  • We change the automation of the function to manual control in order to make changes on our own.
  • After highlighting the list of possibilities, select the line “Add server”.
  • In the open window, enter the value of four eights through a dot and activate the “Add Server” button.
  • Enter the value in the same line. “8.8.8.8.”.
  • Do not forget about the standard service. delete it by clicking on the red button on the left of the numbers.
  • We save the changes made.

The performed procedure will open access to the tablet to use our DNS services. New values ​​may not be activated immediately. To do this, reconnect to the network again and restart the Internet source.

What to do if iPad can’t connect to Wi-Fi?

First, make sure your device is within Wi-Fi range. Experiment with the location of your device to improve signal reception. Also check if your Wi-Fi router is working and if there is an Internet connection on other devices (for example, a PC or laptop). Just in case, reboot your router by simply unplugging the power outlet. Also check the software of your router, and if necessary, update it. There are times when the software on your iPad is outdated, which is also the reason why it does not connect to the wireless network. Therefore, if you have an iPad 2 or iPad Mini with an older version of iOS, update them.

ipad, connect, wi-fi

If everything is in order with the network sources, then try switching to “Airplane mode” on your device, and then back to normal mode. If this trick did not work either, restart your device.

Did not work out? Then we turn to more radical means. To get started, click the “i” icon next to your network, and then click “Forget this network”. If this method also led to failure, we use extreme methods. in the device settings, select the “Reset” item, enter the password, if necessary, and select “Reset network settings”.

This option will not only reset all settings related to the Internet, but also delete all saved passwords. Therefore, this method should be used only in extreme cases.

But another radical method is restoring data from a backup. Of course, in order to do this, you need to prudently save your device data to iTunes. Connect your device to your computer and manually update your iPad software. It is worth noting that in this case absolutely all data will be erased, and your device will look like it just came out of the box.

It also happens that the reason lies not in the software part, and the tablet does not connect to the network due to mechanical failure. Think about whether you dropped your iPad lately or whether it has been lying in a damp room for a long time. Mechanical shock or moisture penetration into the tablet could break the cable connecting the iPad processor to the modem card. In this case, the only way out is to fix it in specialized service centers.

If your iPad was brought from the USA, then the matter is most likely in the settings of your router, which limits the number of free channels.

The fact is that in Europe, 12 or 13 channels are used to work with a wireless connection, and in the USA. only 11. Thus, if your router is distributing on channels 12 or 13, then your iPad simply will not see the network. You can solve this problem as follows:

  • We go into the settings of the router. To do this, enter the address of the router in the address bar. It is unique to each manufacturer. For example, 192.168.1.1 or 192.168.10.1. You can find out the exact address from the instructions for use, which always comes with the device. For example, we will take a D-Link router.
  • Once in the admin panel, go to “Advanced settings”, then to the subsection “Wi-Fi” and from there go to “Basic settings”.
  • Next, we change the country from Russian Federation (or Russia, depending on the device) to United States (USA). We save the settings by clicking “Change”. These settings may look different on your router, but the basic principle is the same everywhere. After that, your device should connect to the network without any problems.

Almost all iPad models are equipped with a Wi-Fi system. This allows you to connect to any source of the network, be it a home router or any hotspot in cafes, restaurants, subways, offices, etc. Connecting to Wi-Fi is easy:

  • Go to Settings
  • We find the item “Wi-Fi”
  • We select the required network and enter the password (if the access point is in a public place, then it is unlikely to be password protected; the password from the home router was most likely told to you when the device was installed)

If everything is in order, then you can enter the network. To see if Wi-Fi is working, take a look at the top corner. There you will see a Wi-Fi icon. Now you can use your browser. However, many of the iPad users faced such a problem when the device did not want to connect to a wireless Wi-Fi network. In the absence of a 3G connection, the inability to access the Network causes a lot of inconvenience and makes the use of the device extremely inferior.

How to disable the function?

Installing iOS 9 allows for this feature to be automatically saved. But it can be adjusted and disabled if the Internet is not connected. To do this, look into the settings and find the cellular data options. A button will be placed at the bottom of the screen that activates the assistant. Move the slider opposite the system name and the device will turn it off.

After the performed manipulation, you need to restart the iPad and the router to make sure that the problem is fixed. Then follow the standard procedure: turn on the router, connect the tablet, enter the access code and check the stability of the connection.

READ  How To Connect The Xerox Phaser 3020 Printer

Reconnecting to Wi-Fi

A maneuver is often triggered when the device “forgets” your router and reconnects with it. This disconnection does not take long and is one of the current solutions to the problem. It is relevant to apply “forgetting the router” after changing the functionality of the router.

To do the procedure, you need to go to the settings and select Wi-Fi. We select the name of your Internet and use the “Forget this network” button. The screen will automatically disconnect from the “web”.

To reconnect, you will need the standard procedure for entering your access code. Most often, manipulation works. If the incident is repeated. after a while of stable operation. check other ways to fix the problem.

Why ipad won’t connect to WI-FI

Almost all iPad models are equipped with a Wi-Fi system. This allows you to connect to any source of the network, whether it be a home router or any hotspot in cafes, restaurants, subways, offices, etc. Connecting to Wi-Fi is easy:

  • Go to Settings
  • We find the item “Wi-Fi”
  • We select the required network and enter the password (if the access point is in a public place, then it is unlikely to be password protected; the password from the home router was most likely told to you when the device was installed)

If everything is in order, then you can enter the network. To see if Wi-Fi is working, take a look at the top corner. There you will see a Wi-Fi icon. Now you can use your browser. However, many of the iPad users faced such a problem when the device did not want to connect to a wireless Wi-Fi network. In the absence of a 3G connection, the inability to access the Network causes a lot of inconvenience and makes the use of the device extremely inferior.

What to do if iPad can’t connect to Wi-Fi?

First, make sure your device is within Wi-Fi range. Experiment with the location of your device to improve signal reception. Also check if your Wi-Fi router is working and if there is an Internet connection on other devices (for example, on a PC or laptop). Just in case, reboot your router by simply unplugging the power outlet. Also check the software of your router, and if necessary, update it. There are times when the software on your iPad is outdated, which is also the reason why it does not connect to the wireless network. Therefore, if you have an iPad 2 or iPad Mini with an older version of iOS, update them.

If everything is in order with the network sources, then try switching to “Airplane mode” on your device, and then switching back to normal mode. If this trick did not work either, restart your device.

Did not work out? Then we turn to more radical means. To get started, click the “i” icon next to your network, and then click “Forget this network”. If this method also led to failure, we use extreme methods. in the device settings, select the “Reset” item, enter the password, if necessary, and select “Reset network settings”.

This option will not only reset all settings related to the Internet, but also delete all saved passwords. Therefore, this method should be used only in extreme cases.

But another radical method is restoring data from a backup. Of course, in order to do this, you need to prudently save your device data to iTunes. Connect your device to your computer and manually update your iPad software. It is worth noting that in this case absolutely all data will be erased, and your device will look like it just came out of the box.

It also happens that the reason lies not in the software part, and the tablet does not connect to the network due to mechanical failure. Think about whether you dropped your iPad lately or whether it has been lying in a damp room for a long time. Mechanical shock or moisture penetration into the tablet could break the cable connecting the iPad processor to the modem card. In this case, the only way out is to fix it in specialized service centers.

If your iPad was brought from the USA, then the matter is most likely in the settings of your router, which limits the number of free channels.

The fact is that in Europe, 12 or 13 channels are used to work with a wireless connection, and in the USA. only 11. Thus, if your router is distributing on channels 12 or 13, then your iPad simply will not see the network. You can solve this problem as follows:

  • We go into the settings of the router. To do this, enter the address of the router in the address bar. It is unique to each manufacturer. For example, 192.168.1.1 or 192.168.10.1. You can find out the exact address from the instructions for use, which always comes with the device. For example, we will take a D-Link router.
  • Once in the admin panel, go to “Advanced settings”, then to the subsection “Wi-Fi” and from there go to “Basic settings”.
  • Next, we change the country from Russian Federation (or Russia, depending on the device) to United States (USA). We save the settings by clicking “Change”. These settings may look different on your router, but the basic principle is the same everywhere. After that, your device should connect to the network without any problems.

Connecting to the world wide web on any technique can take a long time if you are poorly versed in the features of this process. iPad does not connect to home WI-FI. this is a common problem for owners of such a gadget. In the article we will consider possible solutions to the problem and help you troubleshoot the system.

Disabling Wi-Fi Assist

IOS 9 and iOS 12 have a unique Wi-Fi Assist feature. It allows you to prevent unwanted disconnection from the router during prolonged use of the device. The principle of operation is not complicated: when there is a threat of disconnection due to a weak signal, the hardware addition automatically switches to the use of cellular data. Wi-Fi Assist activity extended to sitting with a browser, maps, mail and listening to music.

Connection request, what to do?

Such a request requires you to enter a password from your Wi-Fi. Find out the value on the router itself or in the instructions for your router. Once entered, the network should automatically connect and be operational.

If, with the correct access code, “Failed to connect to the network” is displayed, it is recommended to restart the two devices. And then. re-entering the contact compliance request.

How to connect to Wi-Fi on iPad?

  • Go to the Wi-Fi masonry and click on the Wi-Fi network to which we want to connect.
  • If the network is protected, a window will appear in which you need to specify the password for connecting to Wi-Fi and click the Connect button.
  • If you entered the password correctly, then your iPad should connect to the wireless network.
ipad, connect, wi-fi

How to restart iPhone?

Force restart iPhone with Face ID, iPhone SE (2nd generation), iPhone 8, or iPhone 8 Plus

  • Press and immediately release the volume up button.
  • Press and immediately release the volume down button.
  • Press and hold the side button.
  • When the Apple logo appears, release the button.

Where to find the Wi-Fi security key?

In the Wireless Properties section, click the Security tab, and then select the Show characters I enter check box. The Wi-Fi network password will be shown in the “Network Security Key” field.

Why WI-FI turns off on iPhone in standby mode?

In fact, Wi-Fi does not turn off in standby mode, but goes into standby mode with low power consumption. Disconnection from Wi-Fi can be caused by the settings or features of the router. Some routers automatically disconnect consumers that do not request or forward packets over the network.

What to do if iPhone does not see Wi-Fi?

If your iPhone cannot find a Wi-Fi network, the first step is to restart your router. If other devices see the wireless network, and the smartphone does not catch the network, then most likely the problem is not in the Wi-Fi module, but in the software. … Reset network settings back up and reflash iPhone.

Why iPad doesn’t see WI-FI?

Most often, the iPad does not see the network due to problems in the settings of the device itself or the router to which you are trying to connect. Most wireless connection problems can be solved by changing the settings.

Why iPhone disconnects from the network?

Why iPhone Disconnects from Wi-Fi in Standby Mode

Another sign is low speed and a glitch in the network settings. iPhone enters battery saver mode from standby mode. Wi-Fi does not turn off. Different routers are configured to automatically disconnect users who have not been using the network for a long time.

How to restart iPhone XR?

  • Quickly press and release the Volume Up button.
  • Quickly press and release the Volume Down button.
  • Hold the Side button. The normal shutdown screen will appear first, but keep holding the button until you see the Apple logo on the screen.

When connected to an open Wi-Fi, the Internet does not work, or why it is not possible to connect to a free (unsecured) Wi-Fi network

I was always a little surprised by similar questions, in which they wrote that when connected to an open (unsecured) Wi-Fi network, the Internet does not work. Or a phone, laptop, tablet and other devices refuse to connect to open Wi-Fi at all. They asked for some advice on what can be done to solve this problem.

And today, I saw on our forum a message that says that the phone catches unpaired Wi-Fi, connects to it without problems, but the Internet does not work. Then I analyzed the Комментарии и мнения владельцев on the site a little, and I realized that the question is very popular, and I have not written articles on this issue yet. I will correct the situation now

Now, we will figure out why there are problems with connecting to foreign, albeit open, wireless networks. We will try to find out if something can be done with this, and if possible, then what.

I want to write right away that we will consider the problems with the connection and operation of the Internet connection, through other people’s, wireless networks that are not password protected, and with which you can establish a connection.

All the problems that arise when connecting to your own networks are another story. There will simply be more ways to solve this or that error, since you have access to the settings of the router itself.

As sad as it may sound, but if your smartphone, tablet, laptop, etc., does not want to connect to open Wi-Fi, or the Internet does not work after connecting, then most likely, somehow, you will not work out. Somewhere in 90% of cases, you will have to deal with it. Somehow I wrote sadly

For example, let’s take the question I wrote about at the beginning of the article:

It’s a good question, but do you think you can essentially answer this question? I also think not. Maybe it’s just that the Internet is not paid for. There is a connection, but the Internet does not work. Standard situation. Maybe there is some kind of blocking enabled, or the phone did not like the channel on which it works.

I would highlight two main problems. On them, we will divide the article. It will be easier and clearer this way.

Can’t connect to an open Wi-Fi network

This is probably the most popular question. On laptops (and desktops). it may be an error “Windows could not connect to”, or something else.

On mobile devices (phones, tablets). it may be the constant obtaining of an IP address “(by the way, with laptops, there may also be this problem” Identification “). “Saved, WPA \ WPA2 Security.” There may be other mistakes.

If you cannot connect, then you need to think about why this network is not protected. Yes, there are people who just forget to do it, or they don’t need it. They just let everyone use their internet (this is the case with home hotspots). But, I’m sure that in most cases, there is no password because MAC address filtering is enabled there (read tips on securing wireless networks). Which protects even better than a password.

What can you try to do?

Typically, when connected to unsecured networks, the signal strength is not very good. See that the network level is at least two divisions. Otherwise, connection problems may arise precisely because of a weak signal.

If, you connect a laptop (a regular computer with an adapter). then make sure that in the properties of the wireless adapter, in the IPv4 protocol, it was set to receive IP automatically. Like this:

I showed it using the example of Windows 7. In Windows 8, everything will be exactly the same.

If, the problem is observed on mobile devices that run on Android OS, or iOS (iPhone, iPad). I don’t even know what to advise. Except how to monitor the signal level. There seems to be no special settings that would interfere with the connection.

Internet does not work when connected to unsecured Wi-Fi

Well, the second problem is when everything connects, but the Internet does not work.

On a laptop, there will be a status “No Internet access” and a yellow triangle next to the network status (in Windows 8, it will have a “Limited” status), and on mobile devices, the Internet will simply not work, and the Wi-Fi icon will most likely be gray. instead of blue (depends on OS, firmware version, etc.).

If the problem is on the computer, then check the IP settings, as I showed in the screenshot above. Disable antiviruses and firewalls, they can block access to the Internet.

If the problem is on a mobile device, then check if manual proxy settings are enabled. How to do this, I wrote in this article (after the heading “check if the proxy server is disabled”).

In other cases, the problem is most likely on the side of the router itself. Or, your device cannot work with the parameters that are specified in the router settings.

Afterword

As I wrote above, if the phone does not connect to the network, then you are unlikely to be able to do something. If it connects, but there is no Internet access, then exactly the same. The network is not ours, we don’t know what it is with it, it cannot change the settings. Almost all problems that arise with Wi-Fi are to blame for the access points themselves. And, if you try to fix something, then you need to change the settings in them. Provided that your device works fine with other networks.

I think it will still be interesting for you to read about whether they will be able to determine you if you have connected to someone else’s network, and about the safety of using open Wi-Fi networks.

If you have anything to add on this issue, then you can do it in the Комментарии и мнения владельцев below. In the same place, you can leave your questions.

Channel issues

Often, a tablet from a popular American manufacturer cannot even connect to a home network with a stable and strong signal. At the same time, all other home devices (laptops, smartphones) have no problems. In this case, you just need to make some adjustments in the web interface of the router, after which the iPad will also connect to the distributed network without any difficulties.

READ  HP Laserjet Printer Cannot Connect

You only need to do a few things:

  • Enter the router settings;
  • Pay attention to the channel selected by the router in automatic mode;
  • If the number 12 or 13 is displayed there, then you can immediately make an unambiguous conclusion that the cause of the problem has been found. It is very easy to eliminate it. To do this, deactivate the automatic channel selection mode;
  • Go to the “Wireless” tab and manually set one of the static channels, but not 12 or 13;
  • Click “Save”;
  • Restart the router;
  • Done. Now the “apple” gadget will work properly.

Troubleshoot iOS 8.1 and iOS 7 tablets

Even on devices with these latest modern operating systems, it is often difficult to connect to Wi-Fi networks.

The problem solving algorithm consists of the following stages:

  • In the settings, enter the WI-FI section;
  • Click on the network to which the user wants to connect;
  • In the “IP address” item, specify a static number and independently register all the parameters. After that, use the same steps to specify static DNS;

Experts explain the problems with the WI-FI connection by a banal software flaw. It’s just that the energy-saving module “Broadcom BCM4330” is configured to stop the functioning of some elements of the device that quickly consume energy. At the same time, updating the software sometimes helps.

Activation procedure

It is very easy to connect to WI-FI from iPad:

  • Open “Settings”;
  • Then go to the “Wi-Fi” section;
  • Indicate the network and, if required, print the access code;
  • That’s all! The WI-FI icon will appear at the top of the screen. Most likely, you can already start surfing the Internet.

But what if the connection did not happen.

Below are the most popular situations in which there are difficulties with the wireless connection of tablet computers from the “Apple” company, and specific recommendations for their correction.

Solutions to problems when iPad does not connect to the Internet via WI-FI

If the iPad does not connect to the Internet via WI-FI, then for many users the device becomes uninteresting and practically useless. But do not rush to throw it away, as the tablet can still be successfully used as a cutting board, for example, when cutting vegetables for salad.

Or be patient and read the instructions below and fix the annoying problems with the multifunctional gadget. The problem is quite common among owners of Apple products, therefore it has standard and time-tested solutions. Consider software options for eliminating difficulties on a technically sound device.

Weak signal

You should start by analyzing the strength of the transmitted wireless signal, since this is the most common problem for iPad users. While nearby people are successfully using the Wi-Fi connection from Android devices, the iPad does not connect to a weak signal.

The fact is that the iPad is simply unable to connect to an unstable or insufficient Wi-Fi power, even while gadgets from other manufacturers work confidently even with a single level division on the WI-FI icon.

The solution is very simple. It is only required to bring the “apple” tablet closer to the translator (router). and immediately the connection occurs without any problems. And if there is no such possibility, then, for example, the usual replacement of the router antennas with translators with a high gain will help.

Regional settings

It often helps to cope with the task of simply changing the region in the input panel of the Wi-Fi parameters of the broadcasting device.

  • Open the “Wireless” tab;
  • Then, in the “Region” box, write “United States”;
  • Click “Save”.

What to do if iPad cannot connect to Wi-Fi after the software upgrade process?

Even if you turn on the Wi-Fi adapter of the tablet, it often does not recognize the networks after the software update procedure. The following options will effectively get rid of the problem:

  • Install an earlier modification of the router software;
  • Experiment with the choice of the country in the parameters;
  • Reinstall the operating system on the tablet;
  • Reset network settings.

The latter options are categorized as radical events. As a result, the user will receive the gadget in the state in which it was new, immediately after purchase.

All settings will be cleared and the entered passwords will be erased. It is recommended that you back up your tablet data to iTunes before taking drastic measures.

How to connect your phone to a public Wi-Fi network

In order for the phone at home to be able to connect to a wireless network, you need a router. It can be a laptop or a computer with a WI-FI adapter. The main advice: do not be lazy to put a high-quality password on the network and enable the WPA2 security type. You should not strive to be a good neighbor, this is fraught with many problems from running out of traffic to problems with the law if a dishonest person connects to your network.

It is enough to set up the connection once, in the future the phone will automatically find the home network.

The phone does not connect to Wi-Fi, but the computer is connected

This suggests that the problem is not with the router or provider, but with the device itself. Although, the communication channel may be clogged and the router simply does not support a large number of devices. Try turning off the Internet on your computer or laptop and connect only from your phone.

The easiest way to solve the problem is to restart your phone. If it doesn’t help. remove the network. To do this, go to the list of available WI-FI, by long pressing the screen next to the name of your network, call the drop-down list and click the “delete this network” button (option: “forget the network”). Together with it, all settings will be deleted: the remembered IP address, DNS and other parameters. Then find the network you need again and connect to it by entering the password.

If this does not help, find in the “Settings” of your phone the item “Reset mobile Internet settings, WI-FI, Bluetooth”. It can be located in the “System” section or in the “Additional functions”. Reset settings, restart your phone and try to connect again.

All in vain? Download an anti-virus application to your phone and test it. Malicious software can intentionally block Internet access or disrupt access due to certain settings.

Wi-Fi is connected, but says “no Internet access

There are several reasons. First: the router is really not connected to the network at the moment or is working with errors. It needs to be rebooted. you can ask the staff about this when it comes to a restaurant or cafe. Or do it yourself: we recommend disconnecting the power cord for 2-3 minutes, at the same time checking whether the Internet and ethernet cables fit tightly into their cells.

Second: you are too far from the router, and it simply “does not reach” your device. Try to move. If this happens at home, move the router to a different location. perhaps there is some obstacle in the transmission of the signal.

Third, you have not completed your network connection. In many public networks, a mandatory requirement is user authentication on a special page that comes out after you click on the “connect” button. You may have prevented the page from opening. In this case, find the network in the list of available ones, click on it and select “Delete”. Reconnect and wait for the start page to open, where you will need to enter your phone number and the password that will come to it. If the page does not open automatically, go to your phone’s default browser and try to open any page. a window for authorization should appear.

Fourth: The date and time are set incorrectly in the phone. Check settings, enter correct data.

Fifth: There are problems with the IP address. Go to the list of networks and click on the one you need with a long press. Select “Change network”, then. “Advanced settings”. Here, in the IP setting parameter, set the value “custom” and enter 192.168.1.X (where X1) (make sure that this data suits you by looking at the label on your router. There will be sure to indicate its IP address. The phone address will be those the same numbers, except for the last one.Choose it to your taste.)

Sixth: It is possible that despite the free network, the Internet is distributed only to the IP / MAC addresses of devices specified by the administrator, i.e. you won’t be able to connect without meeting the administrator.

Seventh: Perhaps the connection is being blocked by a “security program”: a firewall or antivirus. Try turning them off.

Writes “saved”, but there is no connection, authentication error

If you are trying to connect to a public network in a restaurant or airport, for example, then the explanation can be very simple and offensive for you: the router’s connection limit is simply exhausted, it cannot cope with the number of devices that attacked it, eager to get into the network. This often happens in crowded places: at holidays, concerts. Any channel has a limit, and feeding the phones of thousands of voracious users can be difficult. Or an old router is installed and the phone simply does not support its settings. It is difficult to solve the problem in this case, it remains to wait or look for another network.

Also, a public network can be protected by a password and you do not know it or you enter it incorrectly. Try to talk to local employees, maybe they will reveal a secret for you, even if it is not a public network for all customers.

If we are talking about a home network, this error may indicate a freeze of the router. In this case, it can be reanimated by simply holding down the reset button or disconnecting from the power for a couple of minutes.

If the error persists, go to the settings of the router through your computer (by entering the IP address of the device in the address bar of the browser), check that the encryption type WPA-2 is selected, the DHCP server is enabled. And yes, make sure you enter the correct password. on the router and on the phone. Even if it seems to you that you remember it by heart and there can be no problems with that. Sometimes, during the dialing process, an error may occur and you will not even know what character is in it: just change the password and try to log into the network again.

Also check the date, time and region settings on your phone and router. Their mismatch can lead to devices blocking each other.

What to do if iPad won’t connect to Wi-Fi

Almost all iPad models are equipped with a Wi-Fi system. This allows you to connect to any source of the network, be it a home router or any hotspot in cafes, restaurants, subways, offices, etc. Connecting to Wi-Fi is easy:

  • Go to Settings
  • We find the item “Wi-Fi”
  • We select the required network and enter the password (if the access point is in a public place, then it is unlikely to be password protected; the password from the home router was most likely told to you when the device was installed)

If everything is in order, then you can enter the network. To see if Wi-Fi is working, take a look at the top corner. There you will see a Wi-Fi icon. Now you can use your browser. However, many of the iPad users faced such a problem when the device did not want to connect to a wireless Wi-Fi network. In the absence of a 3G connection, the inability to access the Network causes a lot of inconvenience and makes the use of the device extremely inferior.

What to do if iPad can’t connect to Wi-Fi?

First, make sure your device is within Wi-Fi range. Experiment with the location of your device to improve signal reception. Also check if your Wi-Fi router is working and if there is an Internet connection on other devices (for example, on a PC or laptop). Just in case, reboot your router by simply unplugging the power outlet. Also check the software of your router, and if necessary, update it. There are times when the software on your iPad is outdated, which is also the reason why it does not connect to the wireless network. Therefore, if you have an iPad 2 or iPad Mini with an older version of iOS, update them.

If everything is in order with the network sources, then try switching to “Airplane mode” on your device, and then switching back to normal mode. If this trick did not work either, restart your device.

Did not work out? Then we turn to more radical means. To get started, click the “i” icon next to your network, and then click “Forget this network”. If this method also led to failure, we use extreme methods. in the device settings, select the “Reset” item, enter the password, if necessary, and select “Reset network settings”.

This option will not only reset all settings related to the Internet, but also delete all saved passwords. Therefore, this method should be used only in extreme cases.

But another radical method is restoring data from a backup. Of course, in order to do this, you need to prudently save your device data to iTunes. Connect your device to your computer and manually update your iPad software. It is worth noting that in this case absolutely all data will be erased, and your device will look like it just came out of the box.

It also happens that the reason lies not in the software part, and the tablet does not connect to the network due to mechanical failure. Think about whether you dropped your iPad lately or whether it has been lying in a damp room for a long time. Mechanical shock or moisture penetration into the tablet could break the cable connecting the iPad processor to the modem card. In this case, the only way out is to fix it in specialized service centers.

If your iPad was brought from the USA, then the matter is most likely in the settings of your router, which limits the number of free channels.

The fact is that in Europe, 12 or 13 channels are used to work with a wireless connection, and in the USA. only 11. Thus, if your router is distributing on channels 12 or 13, then your iPad simply will not see the network. You can solve this problem as follows:

  • We go into the settings of the router. To do this, enter the address of the router in the address bar. It is unique to each manufacturer. For example, 192.168.1.1 or 192.168.10.1. You can find out the exact address from the instructions for use, which always comes with the device. For example, we will take a D-Link router.
  • Once in the admin panel, go to “Advanced settings”, then to the subsection “Wi-Fi” and from there go to “Basic settings”.
  • Next, we change the country from Russian Federation (or Russia, depending on the device) to United States (USA). We save the settings by clicking “Change”. These settings may look different on your router, but the basic principle is the same everywhere. After that, your device should connect to the network without any problems.
NNCXV.INFO 2021