iPhone 6 does not see the network

Table of Contents

Time correction to restore access to the cellular network

  • Connect to an active Wi-Fi network.
  • Go to Settings. General.
  • Open Date and Time.
  • Activate the item Automatically.
  • If the switch “Default” is active, then turn it off and turn it on again.
  • Restart iPhone.

As you can see, the method is very simple and at the same time quite effective. However, you definitely need to be connected to a Wi-Fi network for the iPhone to register with Apple’s server. Otherwise, the cellular connection will not come to life.

iPhone does not see the network. simple solution to the problem

After manipulating the iPhone’s firmware or hardware, it is not uncommon for the iPhone to not see the network. There can be many reasons for this problem, but one of the most common is a failure in the current date and time zone settings. Today we will look at the main ways to solve this problem.

After flashing iOS or replacing the SIM card, it happens that the iPhone says “no network”. In place of the operator’s logo is the inscription “No network“. This situation immediately reduces the capabilities of the device and actually turns it into a player. Often, users take the device to a service center, where they try to return the connection for an additional fee, although in most situations, the problem when the network on the iPhone is lost can be solved on their own.

The secret lies in the peculiarities of the operation of iOS itself. iPhone will not pick up the network if the time zone and date / time do not match the current values. It is very easy to fix the situation by simply connecting the smartphone to a Wi-Fi network and performing a number of simple manipulations.

What to do if there is no wireless access point nearby?

In this case, the simplest solution would be to create a Wi-Fi network using another iPhone that can connect to the mobile Internet and distribute the wireless network. It is quite simple to do this:

  • Go to Settings. Cellular. Cellular data network.
  • In the Modem mode section, in the APN field, enter the network identifier. It depends on your mobile operator. The corresponding settings can be found in the technical support of the operator.
  • The Username and Password fields can be left blank.
  • Return to the Cellular menu and go to the Modem Mode section.
  • Activate Tethering.

After these manipulations, a new item will appear in the main settings menu. Modem mode. After its activation, the device will start to “distribute” the Internet.

If this method is also unavailable (the “network search” inscription is saved on the iPhone), then all that remains is to restore the iOS firmware.

First, you will have to download the firmware file, connect your smartphone to a computer with iTunes installed. In the app, select Recover.

It is important to remember that the recovery procedure will delete all personal data and settings from the mobile device.

If even after these manipulations the iPhone does not levitate the network, then the problems may be associated with the hardware of the device and you cannot do without a trip to the service center.

Iphone 4/5/5s/6/6s/7/8/10 no service problem fix || fix no network problem on iphones||

Checking the airplane mode

First, make sure airplane mode is off. Its status can be seen in the Quick Access Toolbar. Secondly, if it was turned off, turn it on for 15 seconds, and then turn it off again. These actions will reboot the SIM card and possibly return the network to it.

Data reset and refresh

  • While in the device settings, select the “General” section, and in it the “Reset” subsection. Open the “Reset” section
  • Reset your network settings. Resetting network settings
  • Return to the main settings and click on the “About this device” button. Automatic diagnostics will be carried out for cellular updates. If they are found, you will be prompted to install them, confirm the action and wait for the process to end. Go to the section “About this device”
  • Go back to the device settings and select the item “Cellular”, and in it the sub-item “Cellular data”. We open the section “Cellular communication”
  • Please fill in all empty fields. Data for them can be taken on the official website of your mobile operator. Entering cellular data

What to do if iPhone can’t see or catch cellular network

There are situations when the iPhone stops seeing the cellular network. In some cases, you can determine the cause and fix the problem yourself, without the help of specialists.

How to fix the problem

First of all, you need to make sure that where you are, other devices with SIM cards of the same cellular operator are picking up the connection. You may just be out of coverage. It is also worth getting out of places where the signal can be drowned out by a dense ceiling, walls or special devices.

If there is a signal on other devices, then you should follow the instructions below, which may return the network to you.

Physical check

If the above steps did not help, then you need to check the SIM card. Pull it out and check if it works on another iPhone. If the network is not found there, then the SIM card will have to be replaced. This can be done at the nearest service of your mobile operator.

If the SIM card works in another device, then there are two options: either some part of the phone is damaged and it needs to be carried to the service, or errors appeared in the firmware that prevent the SIM card from working, and you will have to perform a recovery.

Time change

Incorrect time and date settings may be the reason for the loss of the signal. Errors can occur even if the minutes do not match, so it is recommended to set the automatic time matching mode:

  • Expand device settings. Open device settings
  • Go to the “Basic” block. We open the section “Basic”
  • Select Date & Time. Open the item “Date and Time”
  • Do not forget that you need an Internet connection to auto-update the time, in this case both mobile Internet and Wi-Fi network will do. Activate the “Automatic” function. If it is already enabled, then disable it and enable it again. After that, restart the device so that the time is set, focusing on the network time. Set up automatic date and time updates

Firmware upgrade

Updating the device through iTunes will also help solve the problem:

  • install the program on your computer;
  • connect your smartphone using a cable;
  • select a specific device in iTunes;
  • go to the “Overview” tab;
  • click the “Update” button;
  • click on the “Download” link;
  • confirm your choice by clicking “Update”.

After updating the firmware, the smartphone will start normally. If there is a problem with the SIM card, the iPhone will kindly inform the user about it. A similar solution helps if there were errors with the previous installation of the update or the iOS version was not stable.

Setting the time zone

As a rule, the cause of the malfunction is the incorrect date and time. Take the following steps to get the right setup:

  • Connect iPhone to an active Wi-Fi network.
  • Open the phone settings, then in the “General” menu go to the “Date and time” item.
  • Activate the line “Automatic”. In case the function is already activated, switch off and on again.
  • Wait about a minute, then restart the device.

It so happens that the operator is not able to do his job efficiently due to the remoteness of the area. Select the line “Airplane mode” in the menu and turn it on for 5-10 seconds. After disabling this mode, a network search will occur.

Additional ways to troubleshoot problems

Other troubleshooting methods that we will look at can be considered universal and provide answers to the questions that have arisen, why the iPhone does not see the Wi-Fi network. Let’s analyze the most popular.

Checking the operation of the router

Relevant if a router malfunction is found. Because of this, no device can connect to the internet via Wi-Fi. This can happen due to power surges or malfunction of some parts.

  • Try restarting your router. If the situation has not changed, then use the second option.
  • Go to your personal account and check the parameters of the router. Login to the settings is done through the browser at 192.168.1.1 (or another, which is indicated on the device itself). Enter your personal password and login from the “admin”. Check if the settings are correct.
READ  How to remove a SIM card from an iPhone

If that doesn’t work, then try connecting through another device, such as an iPad. And, if, when trying to connect, the iPad does not see Wi-Fi, then contact the repair service. This is an extreme measure. Maybe it’s time to change your router to a new one.

Reinstall SIM

After buying a new smartphone or hitting the ground, users are “introduced” to a SIM error. In this case, reinstalling the SIM will help:

  • disconnect your iPhone;
  • find a small round hole on the side of the smartphone;
  • take a specialized or suitable paper clip;
  • insert into hole and press;
  • carefully remove the tray;
  • pull out and reinsert the SIM card;
  • put the tray back;
  • turn on your smartphone.

Wait for the phone to fully boot up. If an icon of a defined network appears at the top, then the problem can be considered solved without going to a specialist.

Factory settings

It’s about resetting your phone to factory settings. IPhone users should understand that in addition to system software problems, as well as potentially malware that caused the phone to suffer, photos, videos, installed games and everything else will be deleted.

Therefore, if the device simply does not see the network of the cellular operator, it is recommended to resort to such a solution as a last resort.

How to restore a device

If you have an iCloud or iTunes backup, you can reset your device without losing your data. Otherwise, all personal information and installed applications will be irretrievably lost, so make sure you have a backup in advance. After that, connect to a Wi-Fi network, go to the main settings of the device, then to the “Reset” subsection and select the “Reset content and settings” function. Go through the reset procedure, after its completion, the initial configuration of the device will begin, at one of the steps of which you can specify from which backup you want to restore your device.

No connection in the cold

It happens that in severe frost, the iPhone does not ring. To maintain the functionality of the gadget at negative temperatures, it is recommended to disable 3G and GPS, which prevent the connection.

No network on iPhone 6

We are often approached by users who complain that there is no network on the iPhone 6. Several different breakdowns can lead to this, but all of them are easily eliminated by the specialists of our service center. So, if your iPhone does not find the network, then it is quite possible that:

  • The problem is with the antenna. To fix the malfunction, the antenna will have to be changed.
  • The radio path is out of order. This component is subject to repair, and with a qualified approach can be restored.
  • Doesn’t connect to iPhone 6 network even when moisture gets into the device. In this case, it is necessary to carry out a comprehensive restoration after corrosion.
Seize the moment: Seasonal discount 40-70%.
Photo problem the name of detail iPhone6S / 6S iPhone6 ​​/ 6 iPhone5S / SE / 5C / 5 iPhone4S / 4 Services S.C.
Doesn’t catch the network Part: Antenna Description: poorly catching the network or not at all.Repair time: 40 min.

It is possible to eliminate any of the breakdowns that lead to the fact that the iPhone 6 does not see the network quickly and efficiently at the Apple Telemama service center. Our service professionals will carry out the repairs with impeccable quality and in the shortest possible time. We accompany any performed repairs to replace a component with the issuance of a warranty card, which can be used for a whole year.

  • The trust of our customers is based on the transparency of our and the high quality of our services and components. All current for today you can find in the price list.
  • The first thing to do if the device loses the network is to diagnose. Here it is performed completely free of charge. After it, you will find out the exact cause of the breakdown and will be able to determine the cost of its elimination according to the price list.
  • Becoming our regular customers, gadget users can repair equipment at the lowest price without expecting any promotions or discounts.
  • If your iPhone does not catch the network, the breakdown can be fixed in the Telemama service at cost. To do this, you need to take advantage of the offer of any of the promotions held in our center. After such repairs, you will also receive our regular full year warranty.
  • To offer you the most loyal prices, we purchase all parts for iPhones in bulk directly from the manufacturers.
  • Installing only original spare parts, we are absolutely sure of their excellent quality, therefore, after each repair we issue a guarantee.
  • Is there no network on the screen of your iPhone? Don’t hesitate to visit us. We will solve this problem as quickly and inexpensively as possible.
  • By calling the courier to your home, you can save time. He will take care of the fast and safe delivery of the device to the service.

When the device does not find the network, there is always a way out! After all, our masters will be able to carry out repairs of any degree of complexity.

IPhone 6 Screen. 6900 3290 iPhone 5 Screen. 2890 1890 Screen iPhone 5S / SE / 5C. 2890 1890 Screen iPhone 4 / 4S. 2114 1510 Glass iPhone 3. 1900 890 Installation. 680 (original 1 year warranty) Next.

Replacing parts on the iPhone: Speaker. 900 650 Microphone. 900 650 Home button. 1100 520 On button. 1400 510 Camera. 1680 1200 WI-FI antenna. 900 650 Installation. 680 discounts.

Failure occurred at low temperature

If iPhone is not picking up the network, the problem may be low air temperature. Apple appliances often turn off in the cold or freeze. Communication may also be lost. The user should know what to do in such a situation. First, you need to find GPS and 3G, it is recommended to disable these options in order to reduce the load on the smartphone.

Also, the owner can check the “Airplane mode” function, it must be turned off, otherwise it will not work to make a call and send an SMS. Additionally, the owner of the gadget should check the network settings. If the search for the problem does not give a result, you should visit the service center of the company.

IPhone update

For the gadget to fully function, you need to install updates on time. Usually, you don’t need to look for a section with a new firmware. When new software comes out, a message appears on the phone about it. The owner only needs to press the “Install” button. If the alert is not displayed, you should do the following:

  • for a start, it is recommended to connect your cell phone to a charger;
  • then the smartphone connects to the Internet via Wi-Fi;
  • now the section “Settings” is selected;
  • in the list you should find the item “Basic”;
  • when the transition is completed, select “Software update” in the subsection;
  • as soon as the client enters the page, he will see the available firmware versions;
  • you must press the button “Download and install”.
  • note
  • During the firmware installation process, a message may appear on the screen about the need to remove some applications. The owner selects the Continue button. When the download and installation is complete, the smartphone will install the programs back.

Reasons for the failure, how to fix the problem

When a smartphone does not catch the operator’s network, finding the cause of this failure is not easy. It is worth considering in more detail why such a problem may arise on a smartphone. The following types of problems arise on the phone:

  • Errors in the update. The company is releasing updates for the cell phone that fix previously identified bugs. But in the new version of the software, errors are possible. If the connection stops working after installing a new firmware, the problem is with it.
  • The SIM card is out of date. With prolonged use of one SIM card, it may fail, as the chip breaks. Also, the card may be broken initially. If the owner buys a new SIM card, but she does not catch the connection, you should visit the operator’s office and replace the card.
  • Temperature changes. If the owner uses an old model smartphone, he may not be able to connect to the network when the temperature is below freezing. Also, outdated models are often turned off in the cold.
  • The time is not correct. When the user sets the wrong time and date, network search may fail.
  • The smartphone has been jailbroken. The network will not be caught if attackers gain access to the user’s device.
  • Damage to the mobile. Even a slight fall can damage your smartphone. Internal components of the phone can be damaged. This will lead to problems with the ability to make calls and access the Internet.

These are just some of the apparent reasons why a failure might occur. It is worth finding out why the iPhone does not see the operator’s network and what to do in such a situation.

Problem connecting to 3G

If the user’s iPhone cannot find the network, check the 3G and LTE mobile internet connection. These functions may interfere with the connection to the operator’s network, in which case the smartphone does not pick up the signal well. First, it is recommended to go into the settings and check the installed parameters. If the data is entered incorrectly, you should correct it; for this, a complete reset of the installed settings is performed. This method can fix the problem for a while. If it is not possible to fix the failure on your own, it is recommended to take the iPhone to the company’s technical department. There, experts will help you to flash your cell phone.

  • note
  • You should not reflash your smartphone on your own. If an error occurs, the client will no longer be able to use the cell phone.
READ  Why iPhone speaker doesn't work

Why the iPhone does not see the network and what to do at the same time

To make calls, the cell phone owner uses the SIM card on the smartphone. But there are situations when the iPhone does not see the network. The owner of the gadget should figure out why this is happening and how to fix the problem.

No mobile operator support

There are situations when the iPhone is locked under only one telecom operator. In this case, if you install a SIM card from another cellular company, it will become impossible to make calls from the phone. You can solve the problem by contacting the company’s service. There, the user will be helped to unlock the gadget.

Also, the owner of the iPhone can contact the department of the telecom operator. Perhaps the reason is not the cell phone, but the SIM itself. If it is damaged, it will need to be replaced. It is also possible to call the hot line of the cellular company to inquire about possible technical work.

Signs of damage to the modem or antenna

It is not uncommon for the iPhone to stop seeing the network due to damage to the antenna or modem part. This can happen due to the impact of the smartphone, ingress of moisture and subsequent oxidation of the board. Also, this may be due to poor-quality repairs or non-original cheap parts. There are such breakdowns in the iPhone 4, 5, 6, 7 and 8 series, as well as in the iPhone X.

To check if there really is a problem with the modem, you need to:

  • go to “Settings” and go to the “General” submenu;
  • click the “About this device” menu;
  • find the field “Modem firmware”.

If it is empty, then the modem really has damage, which can only be repaired at a service center. This is a rather difficult and painstaking work and it is impossible to carry out it yourself, without the help of a qualified master.

An antenna malfunction can be judged by the appearance of the phone: if the gadget falls, gets damaged, it is quite possible that the antenna is out of order. In addition, an inoperative Bluetooth or Wi-Fi can also talk about damage to the antenna. Such damage should also be repaired only by an authorized service center.

No network after flashing, iOS update, factory reset

Sometimes it happens that after repairing the device, updating the operating system, flashing or resetting to factory settings, the iPhone loses the network, and the operator’s logo does not appear on its display. Instead, you can see “Searching” or “No network” on the screen. This is especially true for iPhone models 7 and 8, as well as earlier. 4, 5 and 6. The first thing to do in such cases is to make sure that the SIM card is working properly. To do this, you just need to install it in any other phone.

If the SIM card is working, but the problem remains, you should pay attention to the correctness of the time display on the device display. If the current date and time is displayed incorrectly, which happens quite often after repairing a smartphone in a service center, as well as after self-flashing or updating, you must perform the following steps:

iphone, does, network
  • connect to Wi-Fi;
  • go to the “Settings” menu item;
  • in the submenu “General” find “Date and time”;
  • move the “Automatic” slider to the active state;
  • if this item is active by default, deactivate and reactivate the slider;
  • restart smartphone.

It should be remembered that the phone must be connected to a Wi-Fi network without fail, otherwise no changes will occur to the cellular network.

If there is no access point nearby, you can create a Wi-Fi connection using a second iPhone that has access to the mobile Internet. This can be done as follows:

  • enter the “Settings” menu and go to the “Cellular” menu;
  • click on the item “Cellular data network”;
  • go to the “Modem mode” section;
  • enter the network identifier in the APN field, which can be found in the technical support of your operator;
  • the fields “Username” and “Password” are optional;
  • return to the “Cellular” submenu and switch the “Modem mode” slider to active state.

After these manipulations, the gadget will begin to “distribute” the Internet.

Loss of network after replacing the SIM card

There are also cases when the iPhone does not see the network after replacing the SIM card. Such a problem, like the previous ones, can occur in absolutely any model. If this happens, then the first thing to do is to get out and examine the SIM card. It can deteriorate when trimmed by yourself, when water gets on it, or for some other reason. In the event that it is damaged, it will have to be replaced with a new one. The operability of the card can be checked by inserting it into another smartphone.

In some cases, it helps to simply pull out the card and put it back in again. It happens that the network simply “glitches”, and such a simple procedure can restart it. Also, as in the previous cases, you can try to turn off and then turn on the smartphone, or several times to activate and deactivate the “Airplane” mode.

Why the iPhone does not see the network?

Apple makes one of the best smartphones out there. iPhone. But even he sometimes fails his owners. There are times when “Search” or “No network” is written on the phone screen instead of the operator’s logo. Questions about why the network disappeared on a smartphone most often come from owners of iPhone models 4, 5, 6, 7, 8, X, less often. XR, XS, XS Max.

What could be the reason for this? What if the smartphone does not catch or is constantly looking for the network? Does this mean that something is wrong with the device and it is broken? In this article, we will try to figure out why this is happening, consider the most likely causes of such a problem and offer options for solving it on the iPhone.

No network when roaming

It often happens that the iPhone loses the network of the cellular operator abroad when using the roaming service. The most likely solution to this problem is to switch your smartphone from 4G to 3G mode. The fact is that mobile operators, for the most part, do not provide services abroad in LTE networks. Plus, owners of the latest iPhone XR, XS, and XS Max often complain about network issues when using 4G mode. Therefore, it will be advisable to switch to a third generation network. This can be done in the menu “Settings”. “Cellular”. “Voice and data”.

If this does not help, then you can do the following:

  • turn the device off and on again;
  • take out and re-insert the SIM-card;
  • reset network settings in the menu “Settings”. “General”. “Reset”;
  • update to the latest software version;
  • reset your smartphone to factory settings;
  • update the settings of the mobile operator in the “Settings”. “General”. “About this device” menu when Wi-Fi is on.

It may also be that the mobile Internet does not work in roaming. In such cases, you need:

  • go to “Settings”;
  • go to the “Cellular” submenu;
  • find the menu item “Data parameters”;
  • move the slider “Data roaming” to the active position.

If none of the above worked and the smartphone still shows that the network is unavailable, then you should contact the technical support of the operator for help.

Another reason the iPhone can’t find the network is that the mobile operator is not providing its services in the region. That is, it happens that when entering an area where the coverage of a telecom operator is absent, the network disappears, and leaving it does not appear. In some cases, this can be corrected by activating the “Airplane” mode for a while or by turning the device off and on again. This will help reboot the frozen network.

Apple Iphone 6: Wifi Issue Fixes. Fliptroniks.com

Network disappeared after Jailbreak

Sometimes iPhone network gets lost after jailbreak. This is especially true for those models that were originally locked for a specific telecom operator. In such cases, it is best to take the phone to a service center, where it will be unlocked by IMEI. However, this procedure can take several days, depending on which operator the smartphone is blocked by.

Why iPhone won’t catch the network: the main reasons

If your iPhone doesn’t catch the network, you should not immediately panic and look for a suitable service center. Perhaps the problem isn’t worth a damn. What can cause the loss of GSM-signal on the “apple device”?

Finding yourself “in your hands” with an iPhone that does not catch the network, on a trip or on a business trip is not a pleasant situation. The boss will be annoyed that his employee is unavailable and did not submit a timely report, relatives will be worn out with anxiety, potential clients will be off the hook. Even calling for help or a taxi, should something happen to the car, it will be impossible. It should be admitted that modern people are heavily dependent on the GSM signal.

Fortunately, in most situations, you can fix the problem of a weak network on an iPhone by yourself and rather quickly. In the article we will tell you about the common reasons why the “apple” gadget does not catch the network well, and how to fix the situation.

Problems with the settings of the cellular operator

If the time is set correctly, but the iPhone still does not catch the network, you can suspect that the settings of the cellular operator are lost. A set of such measures will help to solve this problem (each subsequent step must be performed only if the previous one did not work):

Turn airplane mode on and off. The corresponding slider is located at the very beginning of the “Settings” menu.

In the “Settings” go to the “Operator” section and deactivate the “Automatic” toggle switch.

READ  How to set up iPhone 11 video

Check if the cellular data settings are correct (APN, username, password). Follow the path “Settings”. “Cellular”. “Cellular data network”. The block “Cellular data” contains the necessary details.

iphone, does, network

You can find the correct parameters for the top 3 carriers in our article on how to set up Internet on iPhone. In case of mismatch, change the cellular data settings on the “apple” gadget manually. Remember to restart your device after changing the settings.

Time is set incorrectly

The first thing to check on an iPhone that doesn’t pick up a GSM signal is the date / time settings. If the settings are incorrect, you should set the correct ones manually. This is done like this:

Follow the path “Settings”. “General”. “Date and time”.

Find out the exact time in your time zone. To do this, you can use, for example, the Yandex. Time”.

Scrolling the reels, set the correct date, hour and minute.

Restart iPhone and check network.

If you have Wi-Fi access, you can avoid manually setting the time. In the subsection “Date and Time” there is a slider “Automatic”. After activating it, the iPhone independently determines the time in the set time zone. but only if the gadget is connected to the Internet.

Your humble servant prefers not to use the automatic time setting, because his iPhone “counts” one hour more than it should be.

SIM card damaged

Mechanical damage to the SIM card or its incorrect cutting cannot be the reasons why there is no network on the iPhone. If the card is defective, the SIM gadget will not recognize it at all. This is a completely different problem, the possible solutions to which we suggested in the article “Why the iPhone does not see the SIM card”.

However, a user suffering from a lack of network on a smartphone should still have a visual inspection of the SIM card. If there is dirt on the contacts, you need to carefully remove it. Even the fact that the user removed the SIM card and installed it back into the slot can help return the normal GSM signal.

If the iPhone owner has suspicions that the gadget does not catch the network well because of the SIM card, he should contact the service office with a passport and replace the SIM. This procedure is free and takes only a couple of minutes.

Weak GSM signal

If the reason for the weak signal is that the user’s place of residence is not within the GSM coverage area, the problem cannot be fixed on your own. You will have to buy a SIM card for temporary use. Although, in fact, the territory where there is absolutely no GSM signal, you still need to look.

There are also areas where the signal is very poor in large cities. As a rule, iPhones are not caught in the subway, basements, elevators. The network can disappear inside the building due to the fact that the concrete walls of the room jam the GSM signal. In some buildings, jammers are deliberately used to prevent employees from over-engaging in Internet surfing. The “jammers” look like this:

Earlier, “jammers” were willingly placed in educational institutions. Now the use of such devices is minimized. the modern educational process involves an active student’s appeal to the mobile Internet.

If the GSM signal is weakened in the user’s home, this is a reason to file a complaint with the service provider. The iPhone owner needs to call the hot line mowing line and complain about the lack of network. The application will be forwarded to the technical department, whose employees will make every effort to solve the problem.

What to do if iPhone can’t find the network?

Go to Settings, General, Reset, Reset Network Settings. This resets Wi-Fi networks and passwords, cellular network settings, as well as VPN and APN settings that were previously used.

Why iPhone does not see SIM card?

If the iPhone does not see the SIM card, then the device may be locked for a specific operator. Very often, in the case of Apple, it is beneficial for manufacturers that the phone works with some specific operator.

Why iPhone 6 does not see the SIM card?

Restart your iPhone or iPad. Check if a carrier settings update is available. … The SIM tray from another iPhone, iPad, or other manufacturer’s phone may not fit. Try to insert another SIM card.

iPhone 5/6/6s: No Service or Constantly Searching. 9 Possible Fixes!!

How to connect to the LTE network?

Android: Menu → Settings → Connections → Other networks → Mobile networks → Network mode → 4G / 3G / 2G (automatic connection). Windows Phone: Settings → Data Transfer → Fastest Connection → 4G.

How to update network on iPhone?

Update carrier settings on iPhone and iPad

  • Make sure your device is connected to Wi-Fi or cellular.
  • Open Settings General About This Device. If an update is available, you will be prompted to update your carrier settings.

Problems with the settings of the cellular operator

If the time is set correctly, but the iPhone still does not catch the network, you can suspect that the settings of the cellular operator are lost. A set of such measures will help to solve this problem (each subsequent step must be performed only if the previous one did not work):

Turn airplane mode on and off. The corresponding slider is located at the very beginning of the “Settings” menu.

In the “Settings” go to the “Operator” section and deactivate the “Automatic” toggle switch.

Check if the cellular data settings are correct (APN, username, password). Follow the path “Settings”. “Cellular”. “Cellular data network”. The block “Cellular data” contains the necessary details.

You can find the correct parameters for the top 3 carriers in our article on how to set up Internet on iPhone. In case of mismatch, change the cellular data settings on the “apple” gadget manually. Remember to restart your device after changing the settings.

Weak GSM signal

If the reason for the weak signal is that the user’s place of residence is not within the GSM coverage area, the problem cannot be fixed on your own. You will have to buy a SIM card for temporary use. Although, in fact, the territory where there is absolutely no GSM signal, you still need to look.

There are also areas where the signal is very poor in large cities. As a rule, iPhones are not caught in the subway, basements, elevators. The network can disappear inside the building due to the fact that the concrete walls of the room jam the GSM signal. In some buildings, jammers are deliberately used to prevent employees from over-engaging in Internet surfing. The “jammers” look like this:

Earlier, “jammers” were willingly placed in educational institutions. Now the use of such devices is minimized. the modern educational process involves an active student’s appeal to the mobile Internet.

If the GSM signal is weakened in the user’s home, this is a reason to file a complaint with the service provider. The iPhone owner needs to call the hot line mowing line and complain about the lack of network. The application will be forwarded to the technical department, whose employees will make every effort to solve the problem.

IOS crash

The ineffectiveness of the above measures tells the user that the problem may be in the software. For the gadget to work correctly, the latest system updates are required. To check if there are available updates, the user needs to follow the path “Settings”. “General”. “Software update”.

If, as a result of the check, the iPhone finds newer software than is installed on the device, the user should download it. If there is nowhere to update further, you need to refer to the procedure for flashing the gadget. This procedure is simple and does not require contacting the service center. any user will be able to perform it with his own hand. To help a newbie, our article on flashing iPhone.

What can you do if your iPhone does not pick up the network well

Often, iPhone users have to face a problem: the gadget does not find the operator’s signal. Cellular communication is the main function of the phone, so it is important to understand what is the cause of the breakdown. If you are confident in the operation of the SIM card and your telecom operator, then you need to check the performance of the device itself.

What to do if the iPhone is not picking up the network well? Let’s consider several ways to solve this issue.

The first thing we do is reboot the device. Experienced PC users know that when it hangs, a reboot is the first step towards restoring work. It should be noted that sometimes the signal disappears due to the inclusion of 3G. Most likely, the problem occurred in the latest iOS update.

If the restart did not help, we perform alternately the methods given below.

Time is set incorrectly

The first thing to check on an iPhone that doesn’t pick up a GSM signal is the date / time settings. If the settings are incorrect, you should set the correct ones manually. This is done like this:

Follow the path “Settings”. “General”. “Date and time”.

Find out the exact time in your time zone. To do this, you can use, for example, the Yandex. Time”.

Scrolling the reels, set the correct date, hour and minute.

Restart iPhone and check network.

If you have Wi-Fi access, you can avoid manually setting the time. In the subsection “Date and Time” there is a slider “Automatic”. After activating it, the iPhone independently determines the time in the set time zone. but only if the gadget is connected to the Internet.

Your humble servant prefers not to use the automatic time setting, because his iPhone “counts” one hour more than it should be.

NNCXV.INFO 2021