iPhone 8 or X won’t turn on or freezes on apple. What to do?
Many of us are well aware of how to deal with the problems that can arise with the long-familiar iPhone. However, Apple has changed a lot in the iPhone 8, iPhone 8 Plus and iPhone X.
In this article, we will try to figure out what to do if your iPhone 8, iPhone 8 Plus or iPhone X do not respond to actions, do not turn on at all, freeze on an apple.
Smartphone freezes on apple while loading
It happens that the iPhone seems to start, but its loading stops at the Apple logo. an apple. But this mainly happens on test firmware and with other risky manipulations.
First. Connect your device to your computer and open iTunes.
Second. When the device is connected, perform a forced reboot.
- On iPhone 8, 8 Plus, X, press and release the volume up button, then press and release the volume down button. And at the end, press and hold the power button until the Apple logo.
- If you are using an iPhone 7 or 7 Plus, press and hold the Power and Volume Down buttons for ten seconds or longer until the Apple logo.
- If you are using an iPhone 6s, 6s Plus, or older, press and hold the Home and Power buttons at the same time for ten seconds or longer until the Apple logo.
Under no circumstances release the buttons described above when the apple appears. the Apple logo. Keep holding them until the recovery screen starts. Let go and exhale.
Third. Select “Update” when prompted to perform a repair or update. iTunes will try to reinstall iOS without erasing your personal data.
ITunes will first download a fresh copy of iOS for the device. You just have to wait until the procedure is completed or try to perform it again if something goes wrong.
The device does not respond at all
If your iPhone 8, iPhone 8 Plus or iPhone X does not respond at all to your actions, it just freezes and shows a static picture or just a dark screen, you need to restart.
In this case, you should not lose any data that you worked on if the corresponding software has an autosave function. And there will definitely not be an iPhone reset.
On iPhone 8, 8 Plus, X, press and release the volume up button, then press and release the volume down button. And at the end, press and hold the power button until the Apple logo.
If you are using an iPhone 7 or 7 Plus, press and hold the Power and Volume Down buttons for ten seconds or longer until the Apple logo.
If you are using an iPhone 6s, 6s Plus, or older, press and hold the Home and Power buttons at the same time for ten seconds or longer until the Apple logo.
Device does not start after restart
If your iPhone 8, iPhone 8 Plus, or iPhone X still won’t turn on after the forced restart procedure, it may be dead. Yes, you didn’t even notice it.
In this case, connect the device to a wired charger (this is preferable) or put it on a wireless station and leave it for an hour. In a couple of minutes this will appear:
If the charging screen does not appear for an hour, or if a screen for connecting to a power source appears, do not despair. Just check the connector, USB cable and power adapter.
First, make sure 100% that all connectors are securely connected and not damaged or clogged with dirt. Try a different cable or power adapter. If it is dull. to the service.
Please note that in winter the battery can run out very quickly due to low temperatures. over, it may not provide the required power, and the device will simply turn off.
Of course, everything written above is also true for the iPhone 7 and below. There are simply no nuances other than the lack of support for wireless charging in this case.
What to do if all else fails
As a result, after all the procedures described above, you should see the familiar lock screen of your iPhone 8, iPhone 8 Plus, iPhone X or an older iPhone that you are so used to:
However, on rare occasions, you may not succeed. Yes, this happens sometimes with the iPhone. And there are plenty of reasons for this outcome:
- There is something wrong with the display if it stays dark but you hear alert tones and feel vibration.
- There is something wrong with the display if it stays black, but you hear a beep when you plug your iPhone into a charger.
- There is something wrong with the touch, if the display works, but does not respond to your gentle and not strong pressing.
- What’s wrong with the buttons if you can’t force restart the device or even just press them to do so.
- Something is just wrong if the device stuck on the screen with an apple and is not recognized by iTunes.
As a result, you need to go to the service. But his choice is a topic for a separate material. Better, of course, in the official one, but it is long and expensive. Unofficial, but dangerous for iPhone.
iPhone frozen and won’t restart
And get the best deals from trusted masters.
- Compare and choose the best conditions
- Feedback from interested professionals only
- Don’t waste time communicating with intermediaries
The situation when the iPhone freezes and does not restart is familiar to many smartphone owners. Software errors occur when applications do not work correctly and conflicts between programs. As a result, the phone starts to hang spontaneously, glitch, the power-on function disappears, it turns out to be inoperative.
Usually, when the device freezes, the iOS versions do not turn off or restart. Most often, older iPhone models (4,5) hang. Modern iPhones of the sixth and seventh models start to fail much less often.
Reasons for spontaneous shutdown of the device
If the iPhone freezes and won’t restart, it was due to some reason. Most often, problems with Apple equipment arise due to the following reasons:
- due to mechanical damage
- software errors, configuration failures
- contact with liquids
- factory marriage
Under the influence of such negative factors, the iPhone may not turn on, hang, glitch, it may not have the function to turn off the device, the Device, Home, Power buttons may not work. In this case, you need to carry out a hard reboot in order to turn off the phone.
Self-service recovery methods for iOS devices
As a rule, if the iPhone starts to freeze and glitch, the owners try to restart the smartphone. But the standard reboot method (pressing the Lock / Power button) does not always give results. IPhone does not perform functions or commands when frozen, no matter how long the button is held down.
In this case, you need to apply a hard reboot. This reboot method allows you to turn on your device even if your phone is experiencing system errors. To get the phone out of the frozen state, you need to press the Home button and the Power button at the same time. Hold the buttons until the Apple logo appears on the iPhone screen. A hard restart puts the smartphone into recovery mode and it should automatically turn on.
There is another way to hard reboot. In order to restart the iPhone and put it into normal operation, you must simultaneously press the Lock button and the Shutdown button. Wait for the iPhone to turn off. After turning off, you should pause for a few minutes and press the Power button. By pressing this button, you will see the Apple logo, which will indicate that the hard reset worked and your phone started up normally.
It should be noted that the Home button and the Power button in the iOS version are responsible for more than just starting recovery mode. With their help, you can take a screenshot of the screen. But you need to hold down the Home key and the shutdown button for no longer than 1 second, otherwise the iPhone will restart. If, after pressing the button, the smartphone does not start to respond and turn on, you need to contact a specialist.
There are several ways to restart your iPhone, depending on how disrupted normal operation is. Signs of a freezing device with an apple logo include:
- iPhone does not come to working condition for more than 1 minute
- I can’t turn on the device
- pressing the (Device, Home, Power) button gives no results
- the device cannot be turned off
As practice shows, most software errors can be eliminated on their own, only some of them require professional intervention.
Benefits of qualified assistance
If you have tried all the restart methods (pressing the Power button and the Home key) and the iPhone has failed to turn on, contact a professional. Experienced specialists will fix software errors on smartphones of the iOS version, correct settings and return a fully working iPhone to you.
For a quick and high-quality iPhone repair, contact Yuda specialists who have extensive experience and the necessary equipment for repair.
Yudu performers will help you restore your phone to working condition when:
- boot mode does not start
- the button does not want to turn on
- charging does not respond
- I can’t turn on the Power, Home keys
- apple logo not visible
iPhone 8 or 8 Plus Fixed! Frozen Screen / Unresponsive (30 Second Fix)
If the iPhone freezes and does not restart, order the services of experienced craftsmen registered with Yuda, and they will perform phone restoration in a short time.
iPhone freezes unexpectedly. what to do with it? Reboot!
Hello everyone! But the truth is, what to do with a frozen iPhone? For example, you can throw it out. And from my own experience, I can say that some owners of old devices would like to do just that. After all, this situation is really wildly annoying. the iPhone screen is on, but does not respond to touches, button presses, the phone cannot even be turned off! All that remains is to look at him and think about how good Apple is after all (sarcasm).
Okay, let’s not scold Tim Cook and his guys. let’s get back to our problem. Which, we must admit, is not very pleasant. However, there is no need to rush to throw out the device (this is not our method!), Because freezes (in most cases) can be fixed in just 1 minute. Yes, yes, yes, it really is a question of 60 seconds. Don’t believe me? Now see for yourself
Since freezes are most often caused by software glitches, in order to get rid of them, just one action is enough. restarting the iPhone.
But how to turn on or turn off the device if nothing happens when you press the “Power” button and the screen? When the iPhone is hanging, you need to do this:
- If you have an iPhone 8 (Plus), iPhone X, iPhone XS (Max), iPhone XR, iPhone 11, iPhone 11 Pro (Max), iPhone SE 2 (2020), iPhone 12, iPhone 12 mini, iPhone 12 Pro (Max ), then you need to perform a fairly tricky combination. Are you ready? Begin! Press “Volume up” (immediately release), “Volume down” (immediately release), press and hold (10-15 seconds) the “Power on” button. Yes, at first it seems difficult, but in fact, everything is very simple. press and release, press and release, press and hold until the “apple” appears.
- Are you lucky enough to own an iPhone 7, iPhone 7 Plus? It is necessary to simultaneously hold down and hold two buttons (“on” and “volume down”) until the smartphone restarts (10-20 seconds).
- For all other “junior” iPhone models. simultaneously hold down and hold two buttons (“power” and “home”) until the restart takes place.
What are these combinations? Nothing supernatural. this is a normal hard reboot of the device (more details here).
That’s it, the problem is solved. And very little time was spent 🙂 Although
It is possible that one of the buttons we need is broken. This means that you cannot get the iPhone out of the frozen state by forced shutdown. What to do in this case? You have two ways:
- Wait until the gadget runs out of battery.
- If you need it faster, you will have to disassemble the device and disconnect the battery for a few seconds.
As you can see, there is nothing complicated here either. The only moment is that it is better to engage in assembly-disassembly if you have a certain experience, or entrust this operation to the masters of the service center.
Finally, a few of the most common questions and answers regarding iPhone freezes:
Absolutely. There is nothing wrong with such things. Despite the fact that iOS is a fairly stable operating system, nothing “software” is alien to it. there is no escape from failures.
And now, the iPhone will always hang like that?
likely no than yes. As a rule, these are isolated cases and they rarely recur.
I have a jailbreak and my iPhone constantly freezes, what to do?
Jailbreak is not an official tampering with the device’s software. Delete it and everything will be “OK”.
Crashes always happen only with a certain game or application. after opening them, the display and buttons stop responding to pressing. How to be?
Do not use this program. Wait until the developers are “able to program” and release a stable update that will not “break” the iPhone.
- Most often iPhone freezes due to software glitches in iOS.
- This problem is very easy to fix. do a hard reboot and everything is “OK”.
- No need to worry too much about this.
How to turn off iPhone if sensor is not working?
So how do you turn off your iPhone if the sensor isn’t working? Take the device in your hands and simultaneously hold down the lock button and the “Home” key. Keep them pressed until the smartphone screen turns off. If you are using the seventh iPhone, then instead of the Home button, you will use the volume down key.
How to restart on Windows 8?
Instead, the reboot is done as follows: first, briefly press the volume up key, then the volume down key, and then hold down the side button until the Apple logo appears. Only then will the iPhone 8 completely reboot.
How to restart an iPhone8?
How to Reset iPhone 8 and iPhone 8 Plus: New Hard Reset Buttons
- Press the volume up button and release.
- Press the volume down button and release.
- Press and hold the Power (Standby) button until the Apple logo appears on the screen.
What to do if iPhone is charging and won’t turn on?
If iPhone charges but won’t turn on, restore it via DFU mode.
- Press the volume up button and release immediately;
- Press the volume down button and release immediately;
- Press the side button and wait for the branded apple to appear on the device display.
How To Fix An iPhone 8 Frozen Screen-Easy Repair
How to Restart iPhone 11 If Sensor Doesn’t Work?
If the gadget is not responding or you just want to quickly restart your smartphone: press and quickly release the volume up button, press and quickly release the volume down button, then hold down the side button and do not release until the iPhone restarts.
How to Restart iPhone 10 If the Screen Doesn’t Work?
How to restart iPhone 10 if it freezes
- Hold and quickly release the volume up button.
- Hold and quickly release the volume down button again.
- Hold down the on / off button (Power key). Hold it until the iPhone screen darkens.
How to turn off iPhone if it freezes?
If the iPhone is frozen and does not respond to button presses, lay it down, it will reboot itself and come to its senses. If the phone itself does not restore its work or you urgently need it. hold down the Home Power button and hold it until the screen blinks and starts to overload. May 6, 2011.
What to do if your smartphone’s touchscreen display becomes glitchy
If the phone starts to glitch or freeze for the first time, first try to wait for the response of the corresponding application. The processor will close unresponsive applications by itself and return to normal operation. If there is no response, try restarting your device. To do this, follow these steps:
- press the “Home” button and the “Power” button at the same time
- hold them for at least 5 seconds
After that, the screen will turn off, and then the phone will turn on automatically. If this does not happen, then click on the lock button and the iPhone will work.
Another way to lock / unlock the screen on the iPhone, or simply turn on the device if the shutdown button does not respond to commands, is to charge the smartphone. It is possible that the phone will start to respond to the power button after reaching 100 percent battery charge, as it stuck due to a large number of running applications that require a lot of power.
If the sensor lags, but at the same time the screen works slowly and gives at least some kind of reaction, then you can do without an emergency reboot method. To do this, just try to turn off your iPhone normally:
- press the Power button
- wait until “Slide To Power Off” appears on the phone screen
- slide the slider to the desired position
Next, turn on the device by pressing the lock button. If Athos freezes and slows down due to a large number of open programs, then the methods of rebooting and shutting down will help him restore performance.
If the phone freezes or slows down after the update, then reset the settings, but first save all the data on the device. There are two ways to fix your smartphone if it starts to glitch:
- “Reset all settings”. a gentle method, since it saves all user data, in order to perform a “Reset all settings”, you need to go to “Settings”, then click the “General” button and then. Reset button
- “Erase content and settings”. a radical method that erases all data from the device, you can also activate this function in the “Settings” section (“General”. “Reset”) by pressing the “Erase iPhone” button
If the iPhone crashes were related to the update, then after resetting the settings, you will be able to dial the number normally, answer incoming calls and messages again.
If the smartphone regularly slows down and freezes, or the screen turns off by itself, then most likely a firmware update is required. Only professionals will help to solve this problem.
How to restart a device without using the power button
There are situations when you need to turn off or restart without using the shutdown buttons (especially important if they do not work at all). To do this, you need to “pull” the “Assistive Touch” function to the desktop. You can do it like this:
- go to the menu item “Settings”
- select “Accessibility”
- activate “Assistive Touch” by moving the slider to the “On” position
This function on the iPhone makes it possible to lock the screen, turn off and adjust the sound, return to the home page, avoiding pressing the Home button, and most importantly, it allows you to turn off the device if the shutdown button does not work.
Why iPhone won’t respond to commands
If the iPhone is frozen, then the first reason you should pay attention to. a large number of applications used. Especially if some of them are constantly running in the background. When running programs that require a lot of space on iOS (for example, geolocation, and various games), the following may happen:
- the touchscreen will respond slowly when pressed, preventing you from answering an incoming call, dialing a number, sending a message, or unlocking the screen altogether
- iPhone will simply turn off due to high battery drain
iPhone may start to glitch even after updating programs over the Internet. Especially if the “Auto update” function is active.
IPhone is frozen
And get the best deals from trusted masters.
- Compare and choose the best conditions
- Feedback from interested professionals only
- Don’t waste time communicating with intermediaries
Apple products are one of the most reliable and high-quality in the world, but sometimes its owners may face the fact that the iPhone or iPad freezes. If the sensor lags, it could be caused by a low battery level or a software glitch. Bringing the touchscreen back to life is most often done through the usual reboot method. To avoid similar problems with the iPhone in the future, you need to understand the reasons for the freezing of the smartphone.
If, after all the manipulations performed, the phone continues to slow down, periodically freezes, does not respond to locking and unlocking, seek professional help. Experts will diagnose the device, determine the reason why the smartphone does not ring and does not respond to the shutdown button. After determining the malfunction, the following work will be performed:
- firmware update
- replacement of loops on the lock key
Restore iPhone 7, 8 via DFU Mode
If restarting didn’t fix your problem, try restoring your iPhone. Recovery mode allows your iPhone to connect with iTunes and restore iOS or restore your data backed up to your phone. This is a relatively simple process and solves the problem in some cases.
Recovery mode works more often than reboot, but even this may not solve the problem.
IPhone 8 freezes how to restart, hard reset:
Just hold the power button and home button until the Apple logo appears. Then let the device complete its sequence.
The new generation iPhone doesn’t have a physical Home button, so the steps above won’t work for it. You need to press the power / lock button on the right side of the device and the volume down button on the left side of the device. Continue holding both buttons together until the screen turns off and the Apple logo appears. How hard reset affects iPhone?
We recommend that you back up your device to your Mac / PC or iCloud before hard resetting your iPhone or iPad.
IPhone 8 freezes and won’t restart, what should I do? How to reboot?
Surprisingly enough, many problems can be solved by simply restarting the iPhone or iPad. Even experienced Apple users sometimes don’t know what to do when iPhone 8 freezes? How do I reboot? So we thought we should cover this topic.
IPhone 8 dfu mode
If you still see the Apple logo and nothing helps, the problem is your iPhone booting. Firmware update in dfu mode stops your iPhone from booting in all paths so you can connect it to iTunes and restore iPhone and start over.
Dfu mode takes some practice because it requires a fairly precise set of steps, but try a few times and you should succeed. To enter dfu mode, follow these instructions:
Launch iTunes on your computer.
Connect your iPhone to your computer using the USB cable that came with your phone
Turn off your phone. If the phone does not turn off using the slider on the screen, just hold the on / off button until the screen turns off
After the phone is turned off, press and hold the on / off button for 3 seconds
When 3 seconds have passed, hold the On / Off button by pressing the Home button on the front of your phone (if you have an iPhone 7, use the Volume Down button instead of the Home button)
Hold both buttons for 10 seconds
Release the On / Off button, but continue to hold the Home (or Volume Down on iPhone 7) button for another 5 seconds
If nothing is displayed on the screen. the Apple logo, connect to iTunes and you received invitations, etc you are not in dfu mode and you need to start the process again, starting from step 1
If your iPhone screen stays black and nothing shows up, you’re in dfu mode. It might be hard to see, but the iPhone screen is off and looks a little different than it did before.
When you are in dfu mode, a pop-up window appears in iTunes on your computer and prompts you to restore your iPhone. You can either restore your iPhone to factory settings or upload a backup of your data to your phone.
If the article: iPhone 8 freezes, what to do? Was useful please share in the social. networks.
What to do if WhatsApp is not updated?
WhatsApp is not updated on the phone: why and what to do?
- Connect the Internet First of all, do not forget to connect the Internet. suddenly you decided to update the application without connecting your smartphone to the Internet?
- Turn on automatic app updates
- Free up memory
- Cleaning the Play Market cache.
- Uninstall and Install WhatsApp.
How to Recover Deleted WhatsApp Messages Without Backup?
# 2. Recovering WhatsApp chat history from old (not recent) backups
- Delete WhatsApp.
- Open your WhatsApp database or backup folder.
- Rename this file from “msgstore-YYYY-MM-DD.
- Install WhatsApp.
- When the restore prompt pops up, tap Restore.
What to do if WhatsApp is not updated on iPhone?
If you are unable to install WhatsApp due to insufficient space on your phone, try clearing the cache and Google Play Store data:
- Open your phone’s Settings Apps & notifications App info Google Play Store Storage CLEAR CACHE.
- Click CLEAR DATA OK.
How to move from one iPhone to another?
To start transferring data from your old iPhone to your new one, click the Transfer from iPhone button. If using a cable connection, the transfer icon indicates that the devices are connected. You can also choose whether to transfer some settings from your old iPhone to your new one, such as Apple Pay and Siri.
How to Transfer WhatsApp from iPhone to iPhone?
How to transfer whatsapp from iPhone to iPhone?
- you need to go to Settings in the “General” item, from there. to the “iPhone Storage”, where make sure that there is enough free space to create a backup.
- It is also important to remember that from the new iPhone you will need to log into the same iCloud account from which the copy is made.
What to do if WhatsApp doesn’t work on iPhone?
If you still face the same situation as WhatsApp not working on iPhone then try using Wi-Fi, switch the connection and turn off then remove the phone from airplane mode and then you can restart the phone.
Which phones won’t support WhatsApp in 2020?
Starting January 1, 2020, WhatsApp will no longer work on all Windows Phone devices. And from February 1, 2020, the messenger will not launch on smartphones with Android 2.3.7 and iOS 8. To simplify, old smartphones that were released before 2011 will lose WhatsApp support.
How to restore WhatsApp chat on iPhone if there is no backup?
- Make sure an iCloud backup exists by going to WhatsApp Settings Chats Backup.
- If you see the date and time of the last backup, uninstall and reinstall WhatsApp.
- After confirming your phone number, follow the instructions to restore your chat history.
There are many reasons why the iPhone freezes, and the most common reason for such a failure is a conflict between the program code of some application and a part of the active code of the device itself from Applee.
than 90% of iPhone freezes are due to a software bug. If the problem persists for a long time, or gives you inconvenience, you should contact a specialist. Such a nuisance in a short time can be eliminated by specialists.
Jailbreak installed on iPhone often causes the device to freeze. Recovering your device after jailbreak will take place without complications with the help of DFU. In general, there is no potential danger in these actions if they are implemented correctly. the iPhone turns on normally, functions, does not slow down and does not crash.
Many active applications
Often, iPhone freezes are associated with a huge number of active applications that noticeably load the processor and RAM. In this case, you need to remove the most resource-intensive applications.
- return to the desktop by pressing the Home button, and then press the Home button twice. This will display a list of active applications;
- press and hold the icon of the frozen program;
- at the beginning of the jitter, you must press the action confirmation key;
- double-click the Home button and re-launch the application.
Problems with the flash drive, and it is not detected? The solution is here.
How to restart iPhone if it freezes
iPhone is the most popular smartphone in the world. A huge number of the planet’s inhabitants literally rave about them. The demand for this electronic device is higher and higher every year. This is what determines the constant records of sales of iPhones.
Due to the fact that the iPhone is a technically complex device, it is prone to certain glitches. There is nothing strange in this, since difficulties occur with almost any technique. The most common problem when using these smartphones is freezing, the reasons for which are many.
A slowdown or even freezing of an Apple product can happen in a variety of situations:
- during phone calls;
- when installing applications;
- when moving file data, etc.
Often the reason for freezes can be the replacement of the firmware, which can “not weak” weird. Although installing the standard firmware version on this device may cause it to freeze. In short, the iPhone freezes and many of its owners simply have no idea what to do with it.
It is important to know what you can do when your Apple smartphone freezes. There are several effective ways that, in most cases, will revive your favorite communicator. Crashes happen on almost all operating systems, and iOS is no exception.
Basic signs of device freezing. not responding to keystrokes, as well as touching the communicator’s sensor.
Incorrect iOS update
Each iOS update, despite the assurances of the manufacturers, carries certain hidden threats. Of course, the most key errors are corrected in it, the speed of work is also significantly higher than in the previous version.
However, despite the fact that the overall performance of iOS has not changed much, many owners of Apple smartphones complain about frequent freezes.
Black screen and a circle is spinning
One of the troubles on iOS 12 on the iPhone is a black screen when turned off and a circle is spinning. This says only one thing: your mobile device is frozen, caught a glitch, or a system error has occurred. Whatever it is, the solution to the problem will be essentially the same.
Why does a circle on the screen spin when the iPhone is turned off in iOS 12
When something goes wrong with our iPhone, we immediately start to get nervous, as we perfectly understand how much it can cost to repair an expensive smartphone. After installing the new version of iOS 11.2 firmware, mobile users noticed that when the iPhone was turned off, a circle was spinning on the screen. What this can mean and how to fix this freeze without the help of the service center, we will tell you in more detail below.
Method 1. when turned on, it will reboot from iTunes
Put your device in DFU mode. all steps are described below. Then select the device recovery function.
Connect your device to your work computer using a USB cable.
Open iTunes (always use the latest version of the program).
Press and hold the side power button and the HOME button (on iPhone 7/7 Plus, the volume down button) at the same time for about 10 seconds.
Release the power button, but hold the other for another 15 seconds.
iTunes will detect iPhone in recovery mode. The smartphone screen must remain off. You can now restore iPhone.
Method 2. on iOS 12 iPhone loads with Tenorshare ReiBoot
Turn to Tenorshare ReiBoot, which fixes system errors on the iOS platform by entering and exiting recovery mode in just a few clicks. The detailed process of using the program is described below.
Download Tenorshare ReiBoot tool to your computer from the official web page. After the download is complete, install the program and you can immediately run it on your computer.
Now we take in our hands your iPhone, on the screen of which a circle is spinning when it is turned off, then we connect it using a USB cable to the PC. Once connected, Tenorshare ReiBoot will immediately recognize it and prompt you to enter recovery mode.
Now click on the active “Enter Recovery Mode” button and wait for your iPhone to enter Recovery Mode. This will be evidenced by the appearance of the iTunes icon and the USB image on the screen of the mobile device.
As soon as the “Exit recovery mode” button becomes available, click on it.
Tenorshare ReiBoot will automatically restart your iPhone. After restarting, the device will turn back on and your problem will be resolved. Most likely, you will no longer see the circle spinning on a black screen when you turn off your iPhone.
Do not uninstall Tenorshare ReiBoot. it may come in handy in the future as it can deal with most iOS errors. Note that there is a third button here, “Resolve iOS Freezes”. If you click on it, you will see a large list of various problems (iPhone constantly reboots, black screen on iPhone, iPhone stuck on an apple, iPad is disconnected, connect to iTunes as unlock) that are encountered by iPhone or iPad owners. Selecting an error or a problem that you encountered from the list. you will be offered a solution.
Tenorshare ReiBoot can be installed on Windows and Mac. You can download it absolutely free.
What to do if iPhone is frozen?
The device itself provides a standard way out of such situations. When the user does not know what to do if the iPhone is frozen, of course, the first way out, which does not provide for any interference with the phone, is to simply wait for the processor to return to normal operating mode on its own in a few minutes. It is possible that one or more applications will be closed for this.
If you need the device now, there is no time to wait, and the iPhone-4c is frozen, but you do not know what to do. then it is worth doing the following operation. It is necessary to simultaneously hold down the central button located under the screen (it is called Home. Return to the home page), as well as the power off key (on the top right panel). In general, this combination is intended for taking screenshots of the screen, however, if you keep it longer, then an automatic reboot occurs. This is what you need when the iPhone-5 is frozen (you don’t know what to do).
Nothing helps, the phone does not respond
If even the power connection of your iPhone did not help it get out of the freeze state, this means that the problem may be at the hardware level. To solve it, the phone needs to be carried to the service center for specialists to help you.
What to do if iPhone freezes? How to prevent future freezes?
Each smartphone works in such a way as to perform certain processes. Those, in turn, are created by applications and downloaded by the user in the event that he wants to go to his favorite game, for example. Sometimes it happens that there are too many of these processes, and the operating system becomes unable to process so much data. Simply put, the phone freezes and stops processing user commands.
Despite the fact that Apple’s equipment is considered reliable enough and such that it does not cause any inconvenience during use, there are times when the iPhone-5 freezes. What to do in such situations, and how to solve such a problem without harm to the device, we will tell you in this article.
How to prevent future freezes
In fact, preventing iPhone from freezing is not that difficult. Since the main reason for such freezes is either the “overload” of the device by programs that consume too many resources (namely, RAM), or the launch of applications that generate errors (though this depends solely on the developers).
It turns out that the iPhone does not freeze, you need to monitor how many applications are running in the background, and periodically close them when there is no longer any need for their functioning.
Not the phone is hanging, but only one application
The methods described above reveal what to do if the iPhone is frozen and does not give any signs for any commands. whether it be pressing the Home button or trying to lock the screen. In the event that only the application that you were using at the moment is frozen, the act should be even easier.
It is enough to double-click the home button to get into the directory of running applications. The one that is stuck and does not respond to commands must be closed and your device will return to normal operation.
What to do if iPhone freezes and won’t turn off?
Yes, iPhones can freeze too. You may never face this, but the fact remains. However, this is not a problem, as the device will most likely resume working after a reboot. The problem is different. the iPhone cannot be disconnected or rebooted in the usual way. Accordingly, the question arises. what to do?
Indeed, if you press the POWER button, nothing happens.
Apple has come up with a way to reboot your device for situations like this. And it consists in this: you need to press not only the POWER button, but also the HOME button, and do it at the same time! Thus, you press the keys and hold them for about 10-20 seconds until the screen goes out.
As soon as the screen goes out, you can release the keys. If suddenly the reboot did not take place, while the screen went out, press the POWER button to turn on your device.
If holding the HOME and POWER buttons for 10-20 seconds does not help, hold them longer. In some cases, it may take a minute or more, but the device should reboot.
Please note that this method works on all iPhones up to 5, 5s, 6, 6 Plus, 6s, 6s Plus. In the case of the iPhone 7 and iPhone 7 Plus, the process is slightly different. The fact is that Apple, starting with these models, abandoned the physical HOME button, so the forced reboot procedure has changed.
If you have an iPhone 7 or 7 Plus, you need to hold down the POWER key, as well as the volume down key, and hold them until the device reboots.
What if the HOME or POWER key doesn’t work? Forcing a reboot of a frozen device will not work. In this case, you only have one thing to do. wait for the moment when the battery in the iPhone runs out, put it on charge and turn on the device in the usual way.
Friends! If our site helped you or you just liked it, you can help us develop and move on. To do this, you can:
- Subscribe to our YouTube channel.
- Subscribe to our group.
What to do if iPhone stuck on apple and won’t turn on
Is your iPhone stuck on an apple and you don’t know what to do? We have prepared instructions to help you get out of this unpleasant situation.
A white / black screen and an apple with a constant reboot is probably one of the most frightening pictures for an iPhone owner. Although, if you understand and know how to act in this situation, then you will understand that everything is not as bad as it seems.
Follow our instructions and you will undoubtedly be able to fix the problem with the frozen apple on the screen of your device.
IPhone hardware problems
Let’s start with the unpleasant. If your iPhone was prone to drops, shocks, contact with water or poor-quality repairs, after which, in fact, a problem appeared in the form of a permanent apple on the screen. you need to contact a service center.
The cause of the breakdown may be a faulty / outgoing cable, damage to the iPhone processor or its other components. Apple iLab Service Center Wizard will help you fix such problems.
What to do if iPhone is frozen on apple
But if you’ve screwed up a bit, there is still a safe chance to bring your iPhone back to life without going to a service center. Read about it below.
Method 1 Force reboot
- Hold down the Home button and keep it pressed for 10 seconds
- After the screen goes out, press the Power button again until the Apple logo lights up.
- The phone will restart on its own and the logo will disappear, if there was no serious system damage on the device.
For iPhone with TouchID (iPhone 7 to iPhone 8)
- Press on Power and volume button.
- Everything goes out, the Apple logo appears again.
- Then turn on the device again.
For iPhone with FaceID (and iPhone SE (2020)):
- Click on the Volume up button.
- Then press the volume down button.
- After that, hold down Power for 10 seconds.
- iPhone should restart.
Please note that you will need to enter your device PIN to continue using it.
Method 3 Enter DFU mode
Using this method will delete all information from the iPhone. If you’ve already created backups, you can download them later from iCloud.
DFU or device firmware update allows you to connect to iTunes and bypass automatic updates. This allows you to change the iPhone firmware to any version.
We wrote about this method for iPhone X / XS / 11 earlier. Using this mode, you can restore the firmware of the device.
How to enter DFU mode on iPhone with TouchID (physical button):
- Connect your iPhone to PC with iTunes.
- Press and hold the Home and Power buttons at the same time. You need to hold for ten seconds.
- Then stop holding Power.
- Keep the Home button pressed for another 10 seconds.
- If your screen is blank, your iPhone is in DFU mode.
- Now when you launch iTunes, you should receive the following message: “iPhone has detected iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes “.
- You can restore your phone to factory settings or upload a backup.
To exit this state: you need to hold down Home and the power button.
How to enter DFU mode on iPhone with TouchID (touch button. From iPhone 7/7 Plus):
- Connect your iPhone to PC with iTunes.
- Press and hold the Volume Down and Power buttons at the same time. You need to hold it for ten seconds.
- Then stop holding Power.
- Keep the Volume Down button pressed for another 10 seconds.
- If your screen is completely blank, your iPhone is in DFU mode.
To get out of this state: you need to hold down Power and Volume Down.
- Connect your iPhone to PC with iTunes.
- Hold down the Volume UP button for a few seconds. Letting go.
- Then press the volume down button. Letting go.
- Then click on Power until the screen goes out.
- When the screen goes out completely, press the volume down button again.
- We hold until the screen turns off completely and this will mean that your phone is in DFU mode.
The Apple logo should not be in DFU mode! If it appears, then you did something wrong. Repeat your steps one more time.
You can get out of this state if: press Volume Down and Power.