Using a secret code
Using the passcode will allow you to change the factory speaker volume settings. To do this, go to the engineering menu. With it, it becomes possible to adjust more positions than in the standard settings.
It is possible to use engineering settings using a secret code.
Steps for adjusting volume using a secret code:
- Go to the “Calls” menu and enter the access code in the field for the phone number.
- For Chinese-made devices, codes ### or ### are suitable. For Samsung. ###.
- After entering the access code, press the call button.
- The engineering menu will appear on the screen.
- Select the “Hаrdwаre Testing” section. If the button doesn’t work when you select, use the gesture to the right.
- Another menu has appeared in front of you. In it, select the item “Audiо”.
In this section, you will see four options for editing the volume:
- Normal Mode. sound coming directly from the speakers.
- Hеаdsеt Mode. Editing the sound on headphones.
- LoudSpeaker Mode. adjust the volume when answering the speakerphone.
- Headset_LoudSpeaker Mode. the sound level during a call in headphones.
After selecting the desired item, two fields with numbers will open. The first field is responsible for the current state of loudness, the second for the final level. For regulation it is necessary to fill in the first item and press the button “Set”.
Reasons for poor sound quality on Samsung Galaxy S8 devices
Experienced craftsmen say that most often such problems are associated with software malfunctions or due to mechanical influences on the device (drops, shocks, condensation or moisture penetration). To fix the problem, first check the device settings and change them if necessary. Most modern gadgets are equipped with such additional sound functions as “Noise reduction” and “Improvement of the subscriber’s voice”.
However, as practice shows, these “improving” the sound capabilities, only exacerbate the situation and cause problems in the form of extraneous noise, gurgling and other sounds that muffle and distort the voice of the caller.
In many cases, when the listed phone options were disabled, the sound problems disappeared. Therefore, before heading to the workshop, check the settings, disable the “Noise reduction” and “Improve the subscriber’s voice” options, reboot the device and check if the problem is resolved. Another option for troubleshooting is setting the preferred network type. If you cannot install the network yourself, contact the specialists for help.
Sound problems on Samsung Galaxy S8 can also occur after installing updates, to fix them you need to perform a system reset. Do not forget to save all the necessary files just before doing this, because as a result of the procedure, all information from the phone will be erased. In order to perform a system reset, go to the settings menu, find “General reset”, set a checkmark opposite the “Clear internal storage” item and press the “Reset phone settings” button. An alternative to a general reset can be flashing a mobile device using FlashTool. The listed troubleshooting options help in most cases related to software glitches and errors.
It’s another matter if the device has been dropped into water, wet, or simply flooded with liquid. The lack of sound in such situations will be associated with the penetration of moisture into the case, and to solve the problem, you will need to thoroughly dry the device, and ideally diagnose for other problems associated with the formation of oxides on the contacts and metal elements of the device. And finally, if the interlocutor does not hear you well during a call, then the speaker or microphone may be out of order.
A quick way to figure out how to adjust the speaker volume is to use the standard phone settings.
- Go to the “Settings” menu on your device, find the “Sounds” section.
- In the window that opens, the volume of the ringtone, alarm clock, etc. is adjusted.
- Drag the slider to the right to increase the volume, and to the left to decrease the volume.
- In the same window there is a function to mute the sound, change the ringtone and other audio parameters.
How to increase the volume in the engineering menu of the Samsung Galaxy S8
One of the main parameters of a modern smartphone is good sound. There are several ways to improve volume and quality, from using Android built-in settings to passcodes and specialized apps. Detailed instructions below.
Choose your Samsung device following our tips and tests
Communicate, ask questions, get high-quality tech. support from site experts
How to determine the causes of dull sound on Samsung Galaxy S8
To take action and fix the breakdown, you must first identify the source of the problem.
|If you have trouble hearing the voice with a certain subscriber||Try calling someone else. Perhaps he is the only one whose speech you can barely understand. And in this case, you have nothing to eliminate. Problems are either in his phone or in the cellular operator, whose services he uses. Contact him in another way and notify your friend that the problem is on his side.|
|If you do not understand the speech of all the subscribers you are trying to call||First you need to restart your mobile device. To do this, there is a special button on the top or on the side of the case. It must be pressed and held until the shutdown confirmation window appears.|
Try to adjust the sound not only with the buttons on the phone case, but also optionally.
To do this, go to the settings and select “Sound” or “Sound Profiles”.
I can hardly hear the interlocutor on the Samsung Galaxy S8 and S8: reasons and solutions to the problem
Cellular communications are the main means of communication today. Phones are an absolute blessing if the device is working properly, and we live in a region with a good signal.
But what to do if the interlocutor is hard to hear in the receiver. we will talk about this in this article. Consider all popular cases and find ways to solve this problem for Samsung Galaxy S8 and S8 smartphones.
So, why can’t you hear the interlocutor on the iPhone (“iPhone”) and what to do?
If the earpiece speaker does not work, you first need to figure out where it is located in your device. At the bottom you can see two holes, one of which is responsible for the speaker, and the other for the microphone. If we talk about the connector located in the middle, then it is intended for connecting a cable.
If you do not hear the interlocutor on the “iPhone”, and at the same time the sound disappears not from the lower speaker, but from the one on the front panel, then there may be several reasons.
The most common situation is with a problem with the headphone plug. Usually, the owner of the smartphone discovers this shortly after the purchase.
As a rule, such a failure is directly related to the shorting of the adapter to 3.5 mm. In this case, the user can try to connect / disconnect the headset several times, better abruptly, but without damaging the connector. In addition, if you encounter such a problem after prolonged use of the phone, most likely, it will need a complete replacement of the audio jack and the upper audio loop.
Less commonly, the sound does not come correctly after using a Bluetooth headset. To do this, go to settings and turn off the headset.
It happens that the solution to the problem is much easier and is due to the fact that the owner is not familiar with the buttons of the device. On the side there is a key that is responsible for turning on / off the silent mode. Check if it was accidentally activated and if the volume level has been turned down.
If you cannot hear the interlocutor on the iPhone (“iPhone”), it is possible that the reason lies in the installation of third-party programs (both from Cydia and through iTunes). It is important to remember which applications you installed recently, perhaps after uninstalling them and restarting the device, the problem will be resolved. over, you can take care of a simple reboot after this problem has appeared. To restart the device, use the Home and Power buttons, holding them down at the same time.
Can’t hear the interlocutor iPhone
What should I do if I can’t hear my iPhone (“iPhone”) buddy during a call? Unfortunately, many owners of Apple mobile devices face this situation. And not everyone will be able to cope with this trouble on their own. In any case, first you need to understand the reasons.
What should I do if I cannot hear the interlocutor on the iPhone (“iPhone”)? Some diagnostic features
As you may have guessed, it is very difficult to identify any patterns that indicate the presence of such problems. Self-diagnosis is also highly discouraged. If you are an inexperienced user, then it is better to start with a simple one. check if there is a silent mode, that is, if the Mute mode is activated.
It would be nice to check the microphone itself. To do this, it is enough to record something on it (for example, your voice). If the problem is in it, then it is advisable to immediately contact our Apple-SAPPHIRE service center. If everything is in order with him, then the problem lies in the connection. Sometimes it helps to restore / update the firmware, but in the absence of the necessary skills and special knowledge, this is also not recommended.
Physical damage cannot be ruled out. For example, a board replacement or other type of repair may be required. To do this, you need to seek help from our highly qualified craftsmen. We recommend that you sign up to us in advance through the website or by phone call. We also offer a courier delivery service that will significantly save you time.
The safest and fastest way to find out why the interlocutor cannot be heard on the iPhone (“iPhone”) is to resort to the help of our masters. Apple-SAPPHIRE offers free diagnostics for any model from Apple, which sets us apart from the competition. Depending on the specific problem, the repair process can take anywhere from 20 minutes to two business days. But we will try to do everything as quickly and efficiently as possible, without making you wait long and without overstating the cost of services.
I can’t hear the interlocutor on the phone on the iPhone. what to do
Have you noticed that with some calls on your iPhone, the interlocutor becomes inaudible? This problem is quite common among owners of Apple smartphones. Its cause can be either an iOS error or a malfunction or contamination of the iPhone receiver. What to do in any of these cases is described in this manual.
Clean the receiver
The iPhone receiver may not work properly if it is dirty or clogged. Make sure that the receiver is not blocked by anything, such as a protective film or case, and also check that the receiver grille is not clogged. In the latter case, you need to brush it with a clean dry brush with soft bristles.
Advice! If you just bought an iPhone, remove the plastic films from the covers of your smartphone.
Force restart your iPhone
Quite often, the problem with poor performance of the iPhone receiver is due to a software bug. Perform a forced restart of the smartphone by holding down the Power and Home buttons (the volume down button on the iPhone 7/7 Plus) in order to reset errors.
An even more powerful way to fix a software bug is to restore your iPhone. For this:
Note: You must have an up-to-date version of iTunes installed on your computer. You can update iTunes on Mac by going to the Updates tab in the Mac App Store, on Windows from Help → Updates. If iTunes is not installed on your computer, you can download the latest version on the official Apple website.
Download the latest iOS version for your iPhone on this website.
Connect your iPhone to your computer and then put your smartphone into recovery mode. To do this, simultaneously hold down the Home and Power buttons for 10 seconds, then release the Power button, but continue to hold the Home button for 6-9 seconds. If you did everything correctly, iTunes will report iPhone detection in recovery mode.
Note: Putting iPhone 7 and iPhone 7 Plus into recovery mode is slightly different. Instead of the Home button, you must hold down the Volume Down button.
Hold down the Shift key and hold it down and click “Restore” in iTunes. In the window that opens, select the previously downloaded firmware file.
Confirm the start of the recovery procedure.
After the restoration is completed, perform the initial setup of the iPhone, and then check if the error with the incorrect operation of the device receiver has been fixed.
Check volume and connections
Initially, you need to check the basic settings. First, make sure the call volume is not set to the minimum. During a call, adjust the volume using the control buttons. the screen should display the volume indicator and its current state.
Secondly, make sure that no headset is connected to the iPhone, as there will be no sound from the smartphone’s receiver in this case. Check that nothing is plugged into the headphone jack or dock jack, and that the iPhone is not stuck in headset mode. In addition, go to Settings → Bluetooth and turn off Bluetooth.
Contact the service center for help
If none of the above methods helped, in your case the problem is hardware. Only the specialists of the service center will be able to help solve it.
Please rate 5 stars at the bottom of the article if you like this topic. Subscribe to us Telegram. In contact with. Instagram YouTube.
Dirt on the grid
Too much dirt (and foundation, in case you’re a girl) can play a bad role not only in the 3.5mm jack, but also in the speaker mesh. Try to clean the technological holes and the speaker mesh. you can even use ordinary scotch tape (glue / peel it off from the speaker mesh several times). How to do this procedure in video format:
Home iPhone repair shop reopened. Today we are dealing with the lack of sound during an incoming call. And it’s not always about Chinese iPhone speakers. And not even in a completely bent train. There may be several problems.
Parsing the phone
Our pictures are of poor quality and not very informative. Two excellent parsing instructions with detailed pictures can be found here and here
First, unscrew the two Pentalobe screws with a diameter of 3.9 mm (“stars”) near the charging connector:
Next, detach the case from the display. It is better to use a suction cup for this. Please note that you need to disconnect the screen at the bottom of the case: at the top there is a cable for the speaker and camera, and it is very easy to break it. In turn, act very carefully in the lower part. so as not to cut off the TOUCH ID loop (you must remove the retainer of this loop and carefully disconnect:
We open the phone. We see our speaker and cable. they are located on the display module. Do not bend the display module more than 90 degrees:
Before starting to release the cable and speaker, you must disconnect the battery from the system board. In principle, it must be turned off for any type of repair work. it is worth remembering. To do this, we will unscrew the protective plate (two 1.6 mm Phillips screws) and disconnect the ribbon cable:
Next, detach the plate that holds the top ribbon cable and detach it from the body Front camera ribbon cable with proximity sensor, LCD screen ribbon cable and touch screen ribbon cable. Only 4 screws:
- 1.7mm red Phillips screw
- Phillips 1.2mm ginger screw
- yellow 1.3mm Phillips screw
- 1.7mm green Phillips screw
Be sure to remember which one was screwed in where. If, during reassembly, you mix up the seats, you can damage the board.
Then you need to remove the protective plate from the upper earpiece (two Phillips 4.1mm and 2.2mm screws):
At the end, carefully dismantle the speaker. It does not have any connectors, and works by simply pressing it against the panel using a plate:
and all other components that are on the same loop:
This completes the dismantling of the speaker and loop:
Damaged capacitor and / or filter
This is usually, again, due to poor quality repairs. you yourself are unlikely to be able to break the capacitor (FL49) or “demolish” the filter (C215). It’s easy to do. with the usual disconnection of the coaxial wires inside the phone, it is very easy to damage them (they are nearby)
Here is a FL49 filter on a different circuit (from the video below)
On the phone itself, it looks like this. The photo shows that there are not enough components on the board:
In order for the sound to appear again, it is necessary to restore these elements. tinsel these places with solder and install these components from another board.
You don’t hear the interlocutor well, although he hears you perfectly
You don’t hear him at all. but he also has excellent audibility
The interlocutor hears you only on speakerphone
Recently, there have been extraneous noises and interference during conversation
You don’t hear the interlocutor well, although he hears you perfectly
You don’t hear him at all. but he also has excellent audibility
The interlocutor hears you only on speakerphone
Recently, there have been extraneous noises and interference during conversation
We do not recommend crawling into the interior of the device on your own, due to the fact that it is easier to break the cables, stratify the display module, screw the screws into the wrong place or chip SMD elements than it is to snap a finger. We do not recommend performing any work without relevant experience. Repeat everything described below only at your own peril and risk.
Please note: This article discusses a solution to the problem using the iPhone 5S as an example.
The contact between the modem and the audio codec is faulty
Quite a rare problem, but also related to our scenario. It is usually diagnosed by pressing (pressing well) the upper right corner, where the modem is located. the sound from it begins to reach the audio codec. The BB_I2S_RXD (i2s1) bus is responsible for this signal. It is necessary to check and, if necessary, restore the bb_i2s_clk tracks. bb_i2s_rxd. bb_i2s_txd. bb_i2s_ws (chain from modem to central processor)
Features of self-diagnosis
It is extremely difficult to independently determine the presence of specific problems, especially if we talk about the recent owners of such a gadget.
To begin with, you should start small, believing the presence of a normal volume level, and whether the silent mode was accidentally turned on, for this the Mute button is activated.
After that, it is worth checking the operation of the microphone, for example, by recording a few words with your voice on a dictaphone. If there are noises, extraneous sounds, intermittent poor voice delivery, you need to contact the service center for diagnosis by specialists. If it’s not about the microphone, you can restore or update the firmware, but preferably not by your own efforts. Physical malfunctions that lead to such problems are not excluded. The phone may need a board replacement or other repairs.
Can’t hear the interlocutor on the iPhone: causes and diagnostics
What to do if you cannot hear the interlocutor on the iPhone? Practice shows that many users of such a smartphone face similar problems. Any malfunction in the operation of the device requires a clear formulation, search for causes and their elimination. It is worth considering the main symptoms and causes, rules and subtleties of self-diagnosis, and only after that try to fix everything. Separately, the article will outline situations in which the phone needs to be taken to a service center.
Symptoms and reasons why the interlocutor cannot be heard on the iPhone
For a malfunction, when it is hard to hear the interlocutor on the iPhone, the speakers are primarily responsible. There are usually 2 of them in such mobile phones. one from the bottom is responsible for the speakerphone, the delivery of music and sounds during a call, the second from the top is needed to hear the voice of the caller.
If you are using an iPhone and you cannot hear the interlocutor during a conversation, this is manifested by the following symptoms:
- Defective Mini-Jack 3.5 mm. In this case, the one who is on the other end of the rein will not be heard. The reason for this may be a malfunction in the 3.5 mm plug, for example, when the contacts are simply closed. In this case, it is worth trying to connect and disconnect the plug several times in order to clean the socket from oxide and possible debris in this way.
- Volume swing or “Mute” button. New owners of such a smartphone at first may not know that there is a magic button on the side of the panel, which, with one click, puts the phone into silent mode. You also need to make sure that the sound was not turned off with the volume swing.
- Damage to the upper speaker. This situation often happens due to the ingress of water, dirt, dust. In the first case, oxidation and contact closure occurs, which disrupts the conductivity of the signal to the motherboard from the speaker. In addition, it is protected by a mesh, and if it becomes clogged with dust and debris, sound conductivity is again disturbed. In this case, you need to figure out how to clean the speakers I
- Fall of the gadget. It is not uncommon for the microphone and speaker to malfunction after the phone fell. During the conversation, the microphone acts as a noise canceling agent, and a fall from a height leads to the failure of the audio codec or loop. Against this background, the sounds from the incoming call are perceived as noise, and the microphone will try to extinguish it in every possible way. You can check the operation of the microphone if you record your voice on a dictaphone.
In addition to the fact that the reason for the non-conduction of sound during a telephone conversation may be the fact that the Iphone speaker does not work, software failures can be attributed to common reasons.
- Bluetooth. it is possible that the phone was connected to headphones, speakers via Bluetooth before the call, and incorrect disconnection of iOS will lead to the fact that the phone will not switch to the mode when it should work without a headset;
- iOS crash. in this case, there is a periodic audio failure, as a result of the fact that the operating system needs to be reinstalled;
- third-party applications. against the background of working with third-party software, malfunctions of the gadget may occur, so the last downloads should be removed or reinstalled, hold down the “Power” and “Home” buttons.
Only under the condition of competent diagnosis, determination of symptoms and causes, there is a high probability that the malfunction will be eliminated without contacting a service center.
When to contact the service center
In the event that none of the indicated possible reasons have been confirmed in fact, not a single recommendation has led to the proper result, it is worth contacting the service center. In this case, a quick replacement of the speakers will be carried out, after which the updated gadget will soon return to the owner’s hands.
The article described the symptoms by which you can easily determine why the iPhone does not transmit sound from the interlocutor during a call. A malfunction may require cleaning or reinstalling the speaker, after which the conversation will be conducted in the proper mode. If self-diagnosis did not help, the service center can help. In case of negligence, the problem will not only not be resolved, but it will only get worse.
Most often, it is hard to hear the interlocutor on the iPhone if the speaker is malfunctioning. This part of the smartphone is one of the most vulnerable, since dirt and dust accumulates on the membrane. The main reasons for speaker breakage in iPhone are as follows:
- moisture ingress
- fall of a mobile device
- violation of the contact of the audio codec with the board
The first thing to do when the sound in the speaker becomes quieter or disappears is to thoroughly clean the membrane. If this does not help, then you will need to replace the speaker in the iPhone. When a smartphone is dropped or bumped, the speech and microphone codecs are damaged, which affects the quality of the conversation. In this case, you will hardly hear the caller during a conversation, and he may not hear you at all.
Poor audibility due to earpiece loop
If the subscriber is not heard on the phone during a call, or the sound in the speaker constantly “floats” during a call, the cause of the breakdown may lie in the loop of the earpiece. The flat connection cable can oxidize or break and you will not hear the caller during a call.
To fix the problem, you need to replace the flat cable on the iPhone using a special screwdriver, a flat plastic object and an original spare part, but this is a rather difficult task for a person who is not familiar with the device.
Quiet conversation sounds are often the result of a broken modem in a new phone. The symptoms of this part in an Apple mobile device are as follows:
- rewind sounds are heard during a conversation
- connection suddenly disappears when making a call
- very quiet sound of microphone and speaker
It is very easy to determine that the caller cannot be heard on the phone due to a breakdown of the modem. If your smartphone does not catch the network or does not connect to the Internet, then most likely this is caused by damage to the modem. It is not recommended to repair or replace this part yourself, as careless actions can lead to more serious damage.
Fixing the problem yourself
When the interlocutor is not heard on the phone, the first thing to do is to make sure that the problem is not accidental or inattentive. Sometimes during a call, the user presses the volume control button, and the sound in the smartphone disappears. If the volume on iPhone is set to maximum, then the following may help to solve the problem:
- operating system update
- cleaning the sound channel
- reboot smartphone
- restore default settings
If, while talking on the phone, the sound in the speaker suddenly disappears and the headphone icon appears on the display, this may mean a malfunction of the audio jack and the loop connected to it. To fix the problem, just plug in the headset and pull it out sharply (but carefully).
I can’t hear the interlocutor on the iPhone
And get the best deals from trusted masters.
- Compare and choose the best conditions
- Feedback from interested professionals only
- Don’t waste time communicating with intermediaries
Users of mobile devices from Apple sometimes have a situation when it is hard to hear the interlocutor on the iPhone. In exceptional cases, the cause of the malfunction is communication problems. just wait a while or restart the smartphone for the sound to return to normal.
If the problem of poor audibility during a call appears regularly, then you should look for the causes of the problem in the smartphone itself and eliminate them.
Professional smartphone repair
If you become hard to hear your interlocutors when talking on the iPhone, do not take risks and do not make repairs yourself. Entrust this complex process to experienced specialists registered in Yuda. Professional craftsmen know how to fix damage of any complexity and restore the functionality of a smartphone. The advantages of working with private craftsmen are as follows:
- prompt troubleshooting at home or in the office
- departure at a convenient time for you
- minimum iPhone repair cost
- guarantee for all work performed
An experienced technician will determine why the new iPhone is out of order and repair it using genuine parts and quality consumables. If you become hard of hearing the interlocutor on the iPhone, seek help from professionals who can fix any problem in a short time.
How to make music on iPhone louder
Setting up music, background, key, and volume on iPhone is easy. The procedure looks like this:
iPhone X, 8, 8 Plus, 7, 7 plus, and 6 sounds muffled when talking? Here’s the fix
- The user goes to “Settings”, subsection “Music”.
- Item “Volume limitation”.
- Disable the limitation, set the indicator to the maximum or as the user needs.
- Go back to the “Music” subsection, go to the equalizer menu.
- Select the item “Late Night”, or create your own version of the sound.
You can increase the sound of the speaker just for listening to music in an easier way. It is enough to use the side buttons installed on the phone itself. Up to increase the volume, down to decrease.
Reasons for poor audibility of the interlocutor on the iPhone
Why can there be a quiet iPhone 7 speaker or why the interlocutor is almost (or completely) not heard during a conversation? This problem is less common. The main reasons for poor hearing are described below.
I can’t hear the interlocutor on the iPhone 7. the speaker has become quiet
IPhones are of high quality and great functionality, but even with them problems sometimes arise. What the user may encounter is a deterioration in the sound quality during a call. This phenomenon can be a big problem for the owner of the phone. Why the interlocutor’s voice disappears during a call, how to increase the sound on the iPhone. all this is discussed below.
As practice shows, this moment becomes the most frequent reason for the deterioration of communication. This can happen if the phone is bumped. In this case, the speaker simply shifts to the side, which is why the audibility deteriorates. Damage to the speaker membrane or loop may occur.
Often, the hearing becomes worse due to the large accumulation of dust. In the latter case, it is highly discouraged to try to fix the problem yourself. Opening and careless handling of the device can lead to even more serious problems.
I can’t hear the interlocutor on the iPhone
If the interlocutor is hard to hear on the iPhone, the reasons can be very different. Before dealing with them, it is worth clarifying the scheme of voice reproduction on the phone.
Modern devices have an auditory speaker that is capable of producing a sufficiently powerful and high-quality sound while playing music. It can be easily found as the additional hole located on the front of the device above the screen is perfectly visible.
It should be understood that the speaker is not capable of fully reproducing the full range of audio signals. Nevertheless, its functionality is quite extensive. As a rule, the available functions are enough to hear everything that the interlocutor says without any problems.
Important! If the interlocutor is hard to hear on the iPhone 7, this indicates a malfunction, which does not always depend on the device.
How to boost quiet speaker sound on iPhone 4s
There are several simple, but effective ways to increase the volume of the earpiece on the 4s i-device:
- Cleaning. This is the most working option. You just need to clean the speaker grid from the accumulated dust. This is especially true for those who have been using the same mobile device for a long time.
- Change of settings. You need to get into the equalizer, there you will find the basic settings regarding sound and playback. Opens “Settings”, then the section “Music”, and then “Equalizer”. You can work with the presented possibilities yourself or connect the “Late Night” function, this is the loudest option of all presented.
To increase the sound of the ringtone, you should also go and change the settings. You can simply choose a louder melody and increase the sound.
If none of the options suits or does not work, you can always get additional accessories. Special covers with overhead speakers are available for sale.
Important! There are situations when a quiet speaker is nothing more than a factory defect. In this case, you can try to return the device under warranty if the deadline has not yet expired.
How to increase volume on iPhone 8
Increasing the volume of the ringtone or music in iPhones is possible through the settings. The user needs:
- Go to “Settings”.
- Find the subsection “Sounds”.
- Go to “Call and Alerts”.
- Edit the volume according to your own preference.
In some phones, more modern ones, there is a sub-item “Change with buttons”, which is not active yet. This suggests that in the future there will be a sound control function with buttons, but there is no application on older versions of the phone.
How to increase headphone sound on iPhone 6s
Bad sound in headphones, especially branded ones, is a guaranteed disappointment for the user. However, do not throw away the device right away. You can try to eliminate the flaw and increase the playback volume in the headphones themselves.
- Check for damage. Tears, open cables, water ingress. all this leads to malfunctions and damage to the headphones. In most cases, these problems are not resolved.
- Try connecting and disconnecting the headphones from the device several times, making a little more effort when connecting. Sometimes this is enough, but the main thing is not to overdo it and not break anything. It is also better to immediately make sure that the headphones are connected correctly and that nothing interferes with the work.
- Just turn up the volume of your music playback. How this is done is described above.
- Restart your phone. May work if the problem lies in the device software itself.
In addition, do not forget about the dust accumulated in the connector, which also interferes with the correct operation of the device and equipment. Sometimes it is enough to simply blow through the nest, and sometimes a thorough cleaning is required.
Important! Before proceeding with the above procedures, you should make sure that the problem lies in the headphones, and not in the phone. To do this, simply connect another device to the iPhone and check the volume and sound quality.
Sound problems on iPhone 4S
Verbal communication problems are some of the most frustrating. After all, the inability to hear the interlocutor, or the inability to clearly and clearly convey your thoughts to him. causes a lot of negative emotions in the user. When the speaker does not work. the main function of the phone disappears.
We’ve heard many times about problems with the player on the iPhone 4S, about poor sound quality when listening to an answering machine or making calls. Most likely, you, too, have come across a situation when it is hard to hear the interlocutor during a conversation. If the sound quality deteriorates, noise or crackling noise may be heard. What to do with all this. we will try to tell.
The fourth iPhone has a polyphonic and auditory speaker. It is the earpiece that is responsible for the quality of sound and audibility during a telephone conversation. The hearing speaker sits on top of the iPhone 4s, protected by a thin metal mesh. If sound problems occur, this particular speaker should be replaced.
Cleaning the iPhone 4s speaker grill
No manipulation will make the speaker of the smartphone work if it is dirty or clogged. If the phone is new, remove the protective film from the panel. Otherwise, make sure the speaker is not blocked by anything (blocking can be the film or case that touches it), and then make sure the mesh is clean and easy to pass sound. If the metal grill is clogged, take a soft dry brush and carefully clean the receiver from dirt.
IPhone turns on and off immediately: how to restore a smartphone
Disconnecting iPhone during a call: finding and fixing the cause
Reasons why sound does not work on iPhone 4S
In most cases, you should not sound the alarm and contact the service center for help, because you can try to take a number of simple steps, thanks to which, perhaps, you will be able to fix the problems that have arisen on your own.
After you have tried everything, but not a single step helped you fix the problem, the service center is your last hope. Replacing the speaker at a service center takes less than an hour. Do not do this yourself, because such actions can lead to new problems.
Do not forget to read the comments, there is also a lot of useful information. If there is no answer to your question, and there is an answer to later comments, then the answer to your question is contained in the article, respect someone else’s time.
Reboot the device
If the sound does not work well and you cannot hear the interlocutor, restart the iPhone and then check the speaker’s performance. If the sound quality has not improved, try updating to the latest version of iOS on your smartphone.
If you hear the interlocutor well. but he does not hear you. you should check the performance of the microphone. This is easy enough to do. You need to record your speech on a dictaphone and listen. If speech is not clear, intermittent, or absent altogether, contact the manufacturer’s official service center to replace the microphone.
Shipping films and covers
Another reason: transport film. After buying a new smartphone, there is always a film on the screen, which for some reason people do not remove. They do this ostensibly in order to preserve a beautiful appearance, but this film can simply block the speaker, which will make the interlocutor hard to hear.
Covers can also block sound. They usually have a speaker hole, but sometimes it gets clogged with debris. Try cleaning it and test your phone again.
What to do if the interlocutor is hard to hear on the “iPhone 6”? Causes and solutions to the problem
Modern telephones have not been used for their intended purpose for a long time. Now it is a music player, video and photo camera, GPS-navigator, etc. For conversations, of course, phones are used, but less often than before. But even if the interlocutor is hard to hear on the “iPhone 6”, then this is a reason for the owner to worry. Such expensive gadgets from Apple should work properly.
Unfortunately, not a single phone is immune from this. Even the new flagships iPhone 7 and 7 Plus are at risk.
Could there be a software reason?
Can. The iOS operating system itself is great. It is well optimized, easy to operate and constantly updated. But nowadays many users have popular jailbreaks. These are special programs installed on iOS. In other words. firmware.
Yes, they open up a lot of possibilities for users, including the ability to install cool free programs that would have to pay money without jailbreak. But firmware. these are unofficial software, and no one is responsible for their performance. No need to be surprised that after some jailbreak it will be hard to hear the interlocutor on the “iPhone 6”. And although the problem in the software is solved quite easily, a similar feature takes place.
So it is not recommended, unless absolutely necessary, to install all sorts of complex software that can harm the system. It’s good if the problem with the speaker is of a software nature. In this case, “iPhone 6” repair is not required at all. It will be enough just to install the latest official software via iTunes.
By the way, it is extremely rare that there can be a problem even in the official firmware. There have been times when new versions of Apple’s software only hurt the phone. Therefore, you can try to “roll back” to the previous version of the software. It is unlikely that this will solve the problem, but it is worth trying.
Let’s start with the banal. Inexperienced users, when talking, simply make the sound of the speaker quieter by involuntarily pressing the volume down button on the side panel. In this case, you don’t even need to open the “iPhone 6″ settings. To set the maximum volume, you need to call someone and increase the volume with the side keys during the call.
Judging by the messages on various forums, a simple action also helps many users: insert and remove the headset. If it helps, then that’s great, but if not, then let’s move on.
We clean the speaker mesh
If the mesh that covers the membrane and serves as some kind of protection from debris could become clogged, then to clean it, you need to use a cotton swab with alcohol or a toothbrush. Also try blowing it out and taking out the trash.
If cleaning helped, then that’s great. True, dirt accumulates not only outside, but also inside. Therefore, sometimes the phone needs to be disassembled in order to clean the debris from under the mesh.
For disassembly, special star screwdrivers are used. Most likely, you do not have them, so you will have to contact the service center. If you have the necessary tool, then you can try to remove the cover yourself. But do it carefully so as not to hurt or tear off the train.
Did it help? If not, then we will look for the reason.
Looking for a reason
It is important to remember, after which it became difficult to hear the interlocutor on the “iPhone 6”. For example, after the gadget fell out of your hands or you threw a glass of water on it. It is possible that sand got into the speaker after relaxing on the beach. Anything could disrupt its work, but most often it is the owner who is to blame. The speakers themselves rarely deteriorate. After all, this is a simple module in which there is really nothing to break.
Unfortunately, only a few users can repair the iPhone 6 on their own. This cannot be done without special screwdrivers, therefore the simplest concise advice. take the phone to the service center.
over, if you remember exactly that the speaker began to work worse after a fall, then you shouldn’t be in a hurry. However, if you are sure (or at least there is such a possibility) that you identified a bad sound on the “iPhone 6” after water got inside the case, then you must immediately turn off the phone, remove the battery and take the device to a service center. In this case, this is the minimum that you can do useful. The maximum is if you also dry the phone with a hairdryer for at least 5-10 minutes. Surely during this time, the water will evaporate from the inside. After that, take the phone to the master anyway.
If it turns out that water got inside and closed the contacts, then you will have to put a new speaker on the “iPhone 6”. Usually it is inexpensive, but with the condition of payment for the work, it will not be so cheap. Also, it cannot be ruled out that during the fall, some contact or train did not come off. In this case, repairs will not be expensive.
If all else fails
If removing the jailbreak and installing the official software did not help and the interlocutor on the “iPhone 6” is still hard to hear, then you will have to contact the service center or, if there is no guarantee, to some private workshop.
Well, in extreme cases, just use a wired (it always comes with the phone) or bluetooth headset, and also communicate using speakerphone.