IPhone disconnected and won’t turn on what to do

Table of Contents

iPhone or iPad is frozen, won’t turn on or respond to buttons (may be black screen)

A common problem. A fully charged iPhone (iPad) is frozen (the program is frozen) or has completely turned off. Pressing the screen or the side button, unfortunately, does not lead to anything and does not start the device.

Do not worry! In 99%, nothing terrible happened, the smartphone automatically went into the so-called “save mode”, this happens if you very rarely restart the device.

It should be noted that resuscitation methods may differ depending on the device model. so.

If you have an iPhone 8, iPhone 8 Plus, iPhone X, iPhone XS, iPhone XS Max, iPhone XR, iPhone SE (2020), iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPhone 12, iPhone 12 mini, iPhone 12 Pro or iPhone 12 Pro Max

Press and quickly release the volume up button. Press and quickly release the volume down button. Then press and hold the side button until the Apple logo appears.

iphone, disconnected, turn

Your iPhone or iPad battery is completely discharged?

If your iPhone or iPad is discharged, connect it to the power adapter and charge it for 15 minutes, then try to turn it on without disconnecting from the charger.

If the battery is completely discharged, then sometimes after 5-15 minutes of charging, by pressing the power button, you can see an image with a lightning bolt and an outlet on the screen of a smartphone or tablet. This means that not enough time has passed since charging started. Wait a little more.

On the left is a screenshot of an iOS device that is not connected to the charger, on the right. it is charging:

If you have an iPhone 7 or iPhone 7 Plus

Press and hold the Power button and the volume down button on the left for 15-20 seconds, after which the Apple logo will appear on the screen.

If you have an iPad equipped with a Face ID scanner (without the Home button)

This method is completely identical with the latest iPhone models: you need to press and quickly release the volume up button. Then press and quickly release the volume down button. Then press and hold the power button until the device restarts (the Apple logo appears).

If you have an iPhone 2G, iPhone 3G, iPhone 3Gs, iPhone 4, iPhone 4s, iPhone 5, iPhone 5c, iPhone 5s, iPhone 6/6 Plus, iPhone 6s / 6s Plus, iPhone SE (2016), or iPad with a Home button

To revive the above iPhone and iPad models, just press and hold the Power button and the Home button at the same time for 15-20 seconds, after which the Apple logo will appear on the screen.

iPhone or iPad is frozen, won’t turn on, and won’t respond to buttons. What to do?

Don’t panic if your iPhone or iPad won’t turn on or respond to buttons when you try to turn it on. There are two ways to quickly bring it into working order, which we will tell you about.

The first two reasons the iPhone won’t turn on are not related to hardware or software glitches. Most likely, the smartphone is simply discharged and needs to be recharged, or it freezes, in which case a forced reboot will help.

Why iPhone is hot and won’t turn on?

The reason for this may be a number of factors, we will consider the common ones:

  • A failure has occurred resulting in overheating. In this case, you need to let the phone cool down. To make sure that this is a system failure, hold down the lock button and the “Home” button at the same time, holding it for 15 seconds, the phone should then start turning on.
  • In case the phone was wet, or just turned off due to overheating. The first thing to do is let it cool down. At the same time, do not connect the gadget to a charger or computer, put it in a cool place. After complete cooling, it should turn on.
  • Defective charger. A broken charger or the use of poor quality cables can also cause the phone to overheat. Therefore, if your iPhone is hot and does not turn on after charging, then you should cool it down and buy yourself a new charger.
  • Battery damage has occurred, resulting in increased power consumption and heat build-up.
  • Another option may be the requirement to install a new firmware on the gadget. Unfortunately, from this he could also heat up and now refuse to turn on.
  • A fake has fallen into your hands. If you could not immediately distinguish the original phone from the copy and still used the Chinese iPhone, then it is likely that it overheated and does not turn on, and most likely it will not even work anymore without repair.

But now the question arises, what to do if the iPhone is hot and does not turn on.?

iPhone is hot and won’t turn on: what to do

IPhone users, like many others, also face technical malfunctions. One of the popular questions from users. the iPhone is hot and does not turn on what to do. we will answer this question in our article and tell you how to proceed in this case.

Apple technology is popular in the electronics market of the CIS countries, due to its reliability and convenience. But this is still a technique and there are also problems with it. One of them is the high heating temperature. Therefore, you need to know if the iPhone is overheated and does not turn on what to do, why such a problem can occur at all.

What to do in such a situation?

In case your iPhone 6 gets warm and won’t turn on. We offer several solutions.

First, you need to forcibly restart the gadget, which is done by pressing the “Power” and “Home” buttons for 15 seconds. After that, the iPhone will be rebooted.

The second option is to attempt recovery using Tenorshare ReiBoot. This is done as follows:

  • Install software.
  • We connect the phone using USB to the computer.
  • Click “Enter recovery mode” and wait until the process is completed.
  • After the operation is completed, the “Exit recovery mode” button will become active. Click it. the gadget will be restarted.

When you can fix the problem yourself?

The above are methods to help you fix the problem yourself. But note that you can try to fix everything yourself only in such situations. If this fails, then you should not disassemble the iPhone and see what is inside it, try to fix it or something else.

If you do not have the proper experience and skills in repairing phones, and in particular iPhones, then you should not try your luck, since intervention can only aggravate the situation.

In any of the cases, when the above manipulations did not solve the problem, you need to carry the gadget to the service center.

What can cause the problem with iPhone

The reasons for iPhone breakdown can be software and hardware. In cases where the phone freezes or turns off, because incorrectly configured and buggy, most likely you can fix it on your own. At home, you can also disconnect and reconnect the battery if you are experienced in iPhone disassembly and have tools: spudger, suction cup, tweezers.

If iPhone won’t turn on due to complex hardware problems, it’s best to contact a qualified technician right away. Visit an Apple Service Center if you suspect a manufacturing defect. And urgently seek help from the workshop if you spill liquid on your iPhone: tea, coffee, juice or other drink. You cannot dry the display with a hairdryer, you need to immediately carry the gadget to the master. It is important to clean the contact pads and boards in time to prevent corrosion inside the iPhone.

Basically, problems with the iPhone (difficulty turning on) arise for the following reasons:

  • The battery is completely discharged or was in the cold (in this case, you need to wait. the phone does not turn on only temporarily)
  • the smartphone has been dropped, improperly repaired or flooded
  • a factory defect of parts is allowed (for example, a power controller, a U2 microcircuit or a battery. the phone will not turn on without them)
  • software malfunction (iOS itself or other software)
  • a charger is used that is broken (that is, the iPhone does not turn on, although it hangs on the charge, since it simply does not charge)

Find the cause of the breakdown, act consistently and you may not have to spend money on repairs.

IPhone Symptoms

IPhone problems can manifest themselves in different ways, depending on the nature of the problem. Possible situations:

  • the screen is black or has gone out, the phone does not respond to pressing buttons and touching the sensor
  • The iPhone turns on, but it gets very hot (you can feel the display or adapter hot) and quickly discharges (the battery lasts for several hours, even if the indicator is on and the gadget hangs on charge all night)
  • the smartphone is charged, but you cannot turn it on. the logo flashes for a long time, iOS does not start
  • iPhone keeps turning off by itself
  • iPhone won’t turn on, although it beeps and vibrates

If you have been using your iPhone in the cold for a long time and cannot turn it on, the situation is normal, since the battery is designed only for a certain temperature. Wait for the battery to warm up to room temperature, and only then start diagnostics.

How can you fix an iPhone problem without leaving your home

First, make sure the battery is charged and not the cause. Connect iPhone to original charger and press “Power”. The device turns on quickly under normal conditions, but if the iPhone has not worked for a long time, then, most likely, the battery went into deep discharge mode and you need to wait about half an hour. Check if the charger is heating up, if there is any dirt in the connector. The iPhone may not start because there is not enough current (this happens when using cheap chargers and connecting the battery to the USB port of the computer).

READ  How to enable AirPlay on iPhone

If you see a black screen and your phone buzzes and beeps intermittently but won’t turn on, try restarting it. Algorithm:

  • press the “Sleep / Wake” and “Home” buttons at the same time (if you have an iPhone 7 or 7S, use a combination of “Power” and “Volume”)
  • hold (about 10-15 seconds) until the Apple logo loads

iTunes. How to Fix iPhone Backup Disconnection Problem

A hard reset will not erase iPhone data (contacts, pictures, videos, etc.). If the smartphone still does not turn on, you will have to act more radically:

  • connect the original USB cable to the computer and open iTunes
  • press the “Power” and “Volume” buttons (for 7th generation models) or “Power” and “Home” (for iPads, iPods, iPhones 6 and earlier models); release them only when the screen goes blank
  • press Home and, connecting the USB cable to the smartphone, hold the button until the iTunes logo turns on and the plug icon appears
  • confirm the procedure for updating iOS (if you want to keep the data) or restoring iPhone (if the information has already been saved on another medium)

The new software installation process takes about forty minutes. At this time, it will seem that the iPhone has turned off. the screen will turn off, the phone will not vibrate, buzz and get very hot. During the procedure, the Internet connection should work well, otherwise the software will not load.

iPhone won’t turn on

And get the best deals from trusted masters.

  • Compare and choose the best conditions
  • Feedback from interested professionals only
  • Don’t waste time communicating with intermediaries

If the iPhone is disconnected, does not charge or turn on (for example, vibrates, shows the logo and turns off immediately), do not rush to go to the service and call the wizard. In some cases, problems with Apple technology can be solved without qualified intervention. Perform diagnostics at home, try to understand why the smartphone turns off. Try to find the exact cause of the iPhone breakdown and fix it on your own.

Software settings ok: what to do

If everything is in order with iOS, firmware and applications on the iPhone, contact the specialists.

Of course, with the tools you need, you can disassemble the iPhone yourself and, for example, turn off and reconnect the battery. But without experience and qualifications, you can accidentally damage other parts and, of course, violate the warranty conditions.

Owners of iPhones with a valid warranty can contact the employees of an authorized service center to make repairs free of charge. If the warranty is violated (for example, the iPhone has survived drops in water or shocks that require replacement of the case), the best way to solve the problem is to call an experienced technician at home.

YouDo is a great alternative to free classified ads. Benefits of the service for iPhone owners:

  • performers provide only reliable data, undergo a special check (verification)
  • technicians quickly and accurately find the cause of the breakdown if the iPhone constantly turns off, does not respond to buttons or does not work at all
  • professionals provide on-site iPhone repair services, set reasonable and provide guarantees for up to 1 year
  • private traders and companies use only original Apple spare parts (batteries, power controllers, etc.) and professional tools (allowing you to carefully disassemble the iPhone case, disconnect the battery, repair the motherboard)

Apply for youdo.com in a couple of clicks, select an artist and call him at any convenient time. Tell the phone technician all the details: why the iPhone turned off, how long the phone flashes or vibrates, whether you tried to disconnect the battery and restart the device, how much the charger heats up.

If the iPhone does not turn on due to faulty hardware, performer Yudu will fix the breakage within 1 hour.

iPhone won’t turn on, black screen. what to do

iPhone won’t turn on and apple is on? Or is the screen completely black and the iPhone is unresponsive to button presses? Both of these problems can happen to any iPhone user without dropping the smartphone. Learn what to do if your iPhone won’t turn on in this tutorial. You can solve the problem without going to the service center and the accompanying expenses.

Connect iPhone to iTunes in Recovery Mode

If the iPhone does not react to either charging or hard restarting, the smartphone must be put into recovery mode. Here we immediately note that you may not need to directly restore the iPhone. Everything in order.

The first step is to try to get your iPhone back in working order without restoring it. This method has saved thousands of iPhones without erasing data, which implies recovery. Therefore, we strongly recommend that you initially use it.

Connect iPhone to computer with USB cable and launch iTunes (Finder window in macOS Catalina).

Enter iPhone into recovery mode. For this:

Note: iPhone must be connected to computer via USB cable.

  • On iPhone 6s, iPhone 6, iPhone 5s, and earlier. Press the Home and Power buttons (power button, located on the side or top of the case) at the same time for about 20 seconds until the iTunes logo appears on the screen (laptop logo in iOS 13).
  • On iPhone 7 and iPhone 7 Plus. Press and hold the Volume Down and Power (Side) buttons at the same time for about 20 seconds until the iTunes logo (laptop logo in iOS 13) appears.
  • On iPhone 8/8 Plus, iPhone X and later. Press and immediately release the volume up button. Press and immediately release the volume down button. Then hold down the side button and hold it for about 20 seconds until the iTunes logo appears (laptop logo in iOS 13).

In the iTunes window, click “Eject iPhone”.

Restart your iPhone. To do this, simply hold down the Power button (side button). Alternatively, you can perform a forced reboot using the method described above.

As a result of this operation, your iPhone can turn on and work again as before without the need to restore.

Restore iPhone via iTunes

If the iPhone does not turn on even after connecting to the computer, then only recovery will help out.

❗ In most cases, recovery involves deleting all data from the device. You can return them only if you have an up-to-date backup.

Connect iPhone to computer with USB cable and launch iTunes (Finder window in macOS Catalina).

Enter iPhone into recovery mode. For this:

Note: iPhone must be connected to computer via USB cable.

  • On iPhone 6s, iPhone 6, iPhone 5s, and earlier. Press the Home and Power buttons (power button, located on the side or top of the case) at the same time for about 20 seconds until the iTunes logo appears on the screen (laptop logo in iOS 13).
  • On iPhone 7 and iPhone 7 Plus. Press and hold the Volume Down and Power (Side) buttons at the same time for about 20 seconds until the iTunes logo (laptop logo in iOS 13) appears.
  • On iPhone 8/8 Plus, iPhone X and later. Press and immediately release the volume up button. Press and immediately release the volume down button. Then hold down the side button and hold it for about 20 seconds until the iTunes logo appears (laptop logo in iOS 13).

iTunes will report detecting iPhone in recovery mode. In the window that opens, select “Update”. Initially, this option should be selected, as it can allow you to return the device to a working state without losing data.

If data lossless recovery is possible, the iPhone update process will start. Wait for it to end. ❗ Never disconnect your iPhone from your computer.

If the update fails, then a recovery should be performed. Re-enter iPhone into recovery mode (step # 2) and select “Recover” in the iTunes window that opens. Wait for the end of the operation.

Updating or restoring will bring your iPhone back to working condition.

Connect iPhone to charger

Often, the iPhone won’t turn on and show no signs of life due to the fact that its battery is dead. Connect your smartphone to the charger and leave it connected for an hour.

A few important tips that Honor follows:

Iphone Keeps Connecting And Disconnecting From Mac Fix

  • Use original or quality charging accessories. There have been cases in which the iPhone turned off due to a dead battery, but did not charge due to using a broken charging adapter or cable. Be sure to make sure the charger and cable are in working order.
  • Charge iPhone with electricity. It is very common for users to charge their iPhone from a computer USB port. But due to the old battery in the smartphone and the low power of the connector, charging simply does not occur.
  • Check if the connector is dirty. Sometimes iPhone won’t start charging due to a heavily soiled Lightning connector. Examine the charging port. If it is really dirty, clean it gently, for example with a toothpick.

⚡ How to understand that the iPhone has started charging?

If the battery logo with the Lightning cable is displayed on the screen, the iPhone does not charge and asks for a connection to the charger. If this logo is displayed after you put the iPhone on charge, then the cable or adapter is out of order. Use other charging accessories.

If only the battery is displayed on the screen, then charging is successful. It is worth worrying only if this logo is displayed without changes for more than 30 minutes. In this case, you should also replace the charging adapter and cable.

? Remember how a forced reboot is performed on your device. It can help with most of these crashes that can happen on the iPhone.

A forced reboot is completely safe. Its execution does not delete any data on the iPhone, so you can perform it without fear.

❗ Methods to restore iPhone in this tutorial are arranged from easy to hard. If a hard reset doesn’t work, go to the next method. He will have to help solve the problem.

Perform a hard reboot

The first thing to do if the iPhone won’t turn on is to force it (aka “hard”) restart. It takes the iPhone out of recovery mode, which may have been accidentally turned on, and simply resets software errors on the device.

Force restarting works differently on different iPhone models.

On iPhone 6s, iPhone 6, iPhone 5s, and earlier. Press the Home and Power buttons (Power button, located on the side or top of the case) at the same time for 15 seconds until the Apple logo appears on the screen.

On iPhone 7 and iPhone 7 Plus. Press and hold the Volume Down and Power (Side) buttons at the same time for 15 seconds until the Apple logo appears.

On iPhone 8/8 Plus, iPhone X and later. Press and immediately release the volume up button. Press and immediately release the volume down button. Then hold down the side button and hold it for 15 seconds until the Apple logo appears.

Doesn’t respond to buttons

The moving mechanical parts of the iPhone 5 (Home button, Power key) also begin to malfunction over time. Both the loops and contacts of the mechanism, and the failure of the software can be guilty. Try restarting your phone with Assistive Touch. The function is enabled in the settings in the “Universal access” item. If the restart did not help, then you will need to replace the broken button in the service center.

Requires installation of new firmware

Unstable operation of the smartphone, constant freezes and refusal to turn on can signal that the phone’s firmware is outdated. If you ignore updates, then sooner or later software changes will reach critical mass and Apple services will stop working. So if you haven’t updated your smartphone for a long time, then the first step should be to install the latest available firmware. Connect to a computer with iTunes installed and update.

After update

If the phone stopped turning on immediately after installing the firmware, regardless of whether it ended with errors or not, then update the device again. In difficult cases, if the phone refuses to work with the new firmware, restore the last working one on which it was loaded. To do this, first download the required version from the official Apple website and on the main screen of iTunes, before clicking the “Restore iPhone” button, hold down the Shift key. The program will open a standard file selection dialog, in which it will offer to select the downloaded file.

READ  How to find channels in Telegram on iPhone

Application hung

Even the original Apple programs freeze from time to time, and what can we say about hundreds of third-party applications. If the iPhone is frozen “tightly” and the standard slider does not appear when you press the power button, then a “hard” restart of the device will certainly help. Recall the sequence:

  • Hold down the Home and Power keys at the same time.
  • Wait for the device to turn off (10. 15 seconds), but do not release the buttons after turning off.
  • Wait for the Apple logo to appear and start downloading iOS.

Breakage symptoms

Both software and hardware problems manifest themselves in different ways. Symptoms may be similar regardless of the source of the problem. A sudden screen shutdown, unresponsive buttons, intermittently freezing applications can be the result of a dozen different reasons. Below we will try to describe in detail the characteristic signs of possible malfunctions, we will describe the reasons why the iPhone 5 s does not turn on, what to do if the device constantly freezes.

Eternal apple mode

Let us mention another kind of symptom of software problems with a smartphone. a situation when, when turning on or restarting, the owner of the device sees only the Apple logo, without further reaction of the phone. Sometimes, after installing a new firmware or after restoring via iTunes (especially from DFU mode), the smartphone does not boot immediately. Internal diagnostics and additional optimization can delay the launch of the operating system. At this time, nothing happens on the screen, only the “apple” shines. Just in case, wait a few minutes, if after 5. 10 minutes nothing happens, then the problem is in loading iOS. Try to consistently make a “hard” reboot of the device, restore in standard mode via iTunes and, if this does not help, reflash via DFU mode.

After drowning

Damage to smartphones due to contact with moisture is not the last in the list of reasons for contacting the service. Even brief contact with water or being in a very humid place can damage the contacts and conductive paths inside the phone. Also, note that the iPhone 5 and 5S are not waterproof. If the smartphone, after contact with moisture, began to work incorrectly or completely refuses to turn on, then a visit to the service center cannot be avoided. In this case, a comprehensive cleaning of the contacts damaged by oxidation is necessary, and in difficult cases, the restoration of the motherboard tracks that have undergone electrochemical corrosion. It is really difficult to eliminate the possible consequences of drowning on your own.

Why iPhone won’t turn on or charge?

First, the iPhone shutdown may be due to some kind of software glitch. Most often, software freezes appear as a result of the device not having enough RAM to process all running applications. To fix this, in most cases, it is enough to hard reset the iPhone.

Secondly, on the iPhone, very often, as a result of mechanical impact or falling, the battery can come off the body of the device. If this happens, then at first the device may even work, and the user simply hears the characteristic sound of a dangling battery inside the case. Ultimately, in most of these situations, the battery cable connecting the battery and the board is frayed or torn. After that, naturally, the iPhone won’t turn on anymore. The solution to this problem is to replace the iPhone battery, which can be done at our service center.

The battery can also fail as a result of the use of low-quality chargers, power surges in the electrical circuit or moisture ingress. In such cases, in addition to the battery, the lower connector (charger connector) may also be damaged, which can also be restored or changed in the conditions of the service center.

But there are times when, as a result of mechanical stress, a short circuit or the use of low-quality accessories for charging the iPhone, the microcircuits on the processor board fail. The first thing that can get hurt. this is a Q2 microcircuit, which is a kind of fuse key for other elements along the board power circuit.

Following it, the U2 microcircuit (charge controller and USB synchronization microcircuit) may fail. If the situation is really bad, then the main power controller of the iPhone may fail, the damage of which, according to statistics, is one of the most serious problems associated with the power of the iPhone. Along with this, the microcircuit of the power controller of the modem part may also fail. The characteristic signs of this malfunction are the constant indication of the search for the cellular network, even without a SIM card inserted inside the device.

What to do if iPhone won’t turn on or charge

Every iPhone user sooner or later may face a serious problem, which manifests itself in the fact that the iPhone does not turn on and does not charge. It is worth noting that this can happen to absolutely any iPhone, be it the “old” iPhone 5, as well as newer models of iPhone 6s, iPhone 7 and even iPhone 8. Why does this happen and what to do. about this in detail

What to do if iPhone won’t turn on or charge?

Solving such problems is a more laborious process than conventional modular repairs, because working with a processor board and BGA chips always requires more time, effort and money. In addition, carrying out such an iPhone repair requires a lot of experience and knowledge of how the device’s motherboard works.

It is worth noting that such problems, when the iPhone does not turn on and does not charge, can appear for any user with any iPhone model. However, all iPhone power problems can always be resolved in our service center.

Therefore, we always advise you to entrust the repair of your iPhone and iPad only to trusted companies that are ready to have extensive experience and thoroughly understand the specifics of Apple devices. Please contact us. our masters will be happy to help you repair your iPhone!

The phone stopped charging and won’t boot

There are many reasons iPhone won’t turn on or charge.

  • System crash. In this case, the iphone does not charge and does not turn on as a result of rebooting the RAM, which interferes with its full-fledged operation. The system cannot cope with all the information and the mobile device starts to fail. To correct this situation, you will need to reboot the entire system.
  • If the iPhone does not turn on after restarting, then the reason is clearly different.
  • Mechanical damage to the mobile device. Strong impact may cause the iphone battery to detach from the case. At first, the device may not work at all, while the sound of a dangling battery will be heard. Next, the cable breaks, which connects the battery and the board. After that, the mobile does not turn on and does not respond to charging. To solve the problem, you will need to replace the battery.
  • Using counterfeit chargers that can cause iPhone to turn off and not turn on, unresponsive to charging. Due to low-quality accessories for mobile devices, power surges or moisture may get inside. In this case, the charging connector will also suffer.
  • Iphone may be discharged and no longer turn on or charge due to damaged microcircuits. Along the chain, all the microcircuits of the device begin to be damaged, leading to a complete loss of performance. In addition to the fact that the iPhone itself turned off, and after that it does not turn on and does not charge, it constantly has no cellular connection.

It will be very difficult to solve such a problem on your own; you will need special equipment. This will require the help of a service center or the hand of an experienced craftsman.

iPhone not working, dark screen

The option when the iPhone turns itself off, does not respond to charging and then does not turn on is quite common. Everything happens due to the fact that the iPhone was lying unnecessarily for a long time, while its charge was full. After that, the phone turned off and does not turn on again.

If the iphone has a black screen and does not turn on, then there may be several reasons:

  • Water ingress into the case, as a result, oxidation of contacts and failure of modules.
  • The fall of the iPhone, as a result, the separation of the cable.
  • No matter how trite, but severe frosts can disable the gadget. As a result, the iPhone stops not only charging, but also turning on. In order for the system to work, you need to warm it up, it will be enough to put the device in a warm place for 15 minutes.
  • It is also possible that the iPhone is discharged and a black screen appears. If iPhone is completely discharged, the device may not turn on or charge. What to do if iPhone is on charge and does not turn on for a long time? We read
  • If iphone won’t turn on even after charging? You must press the Lock and Home button. Keep them in this position for 20 seconds, then wait about a minute. At this time, the BIOS should start, and the system will work, the iOs will start loading.
  • If the iPhone has gone out of the screen, the phone is discharged and does not turn on while charging, the problem may be in the breakdown of parts of the device, failure of the charging cable, malfunction of the charger itself.

What to do if iPhone stops working, screen goes blank and won’t turn on? No need to panic, there is a way out of any situation.

If the iPhone is on charge, but it turns off and does not even turn on. In most cases, the following actions work: Simultaneously press and hold the “Power” and “Home” keys for a few seconds. A hard reboot helps in many cases. After that, the mobile device should work like new.

If, after the performed manipulations, the mobile does not turn on even when charging, the problem may be more serious. If the iPhone is not responding to any action, it is a hardware or software error. In order for the mobile to work, you will need to change the battery or charger. In any case, the help of a specialist will not hurt.

The phone is completely discharged

What to do if iPhone is completely discharged and does not work while charging? If the iphone does not turn on after a full charge, then you need to put it on charge and wait at least 15 minutes. If after this time the iPhone does not turn on while charging, what should I do? You need to wait a little longer, some models require half an hour to resume the system.

What if the mobile phone has not been charged for a long time and now does not turn on, you can resume its work in the following way:

  • Put it to charge until the battery symbol appears on the screen. This can take a long time. If, after a day, the mobile screen does not light up, it means that you will need to replace the battery.
  • If the iphone does not turn on charging, then the problem is in the cable or ribbon.

Why is the phone not working

If the iPhone does not turn on, then the reasons may be as follows:

  • Discharged to zero. To resume work, you just need to plug it into the power cord and wait 15 minutes. After that, you can try to turn it on. If the iPhone does not turn on after charging, then the problem should be looked for in another.
  • If, after 15 minutes, the phone does not load, and a lightning bolt and an outlet are displayed on the screen, then it means that not much time has passed since charging.
  • If the iphone turns off and does not turn on, it does not respond to charging, what to do. In this case, the iphone just went into save mode. This happens if it has not been rebooted for a long time.
  • To resume the operation of the device after restarting, you must press and hold the lock button and the Home key for 20 seconds. After that iOs download will start.
READ  How to Transfer Contacts from iPhone to iPhone

Important: if you have an iPhone 7, then in order to resume its work, you need to hold down the Power button and the volume down button for 20 seconds. This will lead to a hard reboot of the device. This usually helps with many problems, including iOs glitches.
If the iPhone does not turn on and does not charge, then the device is simply frozen. To solve this problem, it will be enough to restart it.

The phone won’t charge

Everyone understands that if the iPhone does not charge, then the battery will soon run out and turn off. What to do if iPhone stops charging and won’t turn on?

  • Check if there is current in the outlet. This happens quite often, the phone was charged, but it does not charge.
  • Clean up contacts. It happens that the iPhone screen goes blank, it does not turn on. In this case, you need to check the contacts that could get clogged with dust. All connectors are cleaned using the needle included with the iphone. After disassembly, it should work, if this did not happen, then the problem is different.

There are many more reasons why your phone won’t charge or turn on. Each case is individual, sometimes the mobile can work after a reset to make the system work again.

Take out the battery and put it back

If your phone has a removable battery, remove the cover and slide the battery out of the device. Wait at least 30 seconds and replace the battery. Then try to turn on the phone in the usual way. using the power button.

How to reset iPhone to original settings

First of all, connect your phone to your computer using the original cable. If you have a Mac with macOS Catalina, launch Finder. If you’re using an older version of macOS or Windows, start iTunes. If it is not installed, download it from the Apple website.

Then force restart your iPhone (see step 1). When you see the Apple logo, continue to hold the buttons until the recovery mode appears on the smartphone screen.

Immediately after that, a window with further instructions should appear on the computer monitor. Click “Update” and follow the system prompts.

iTunes will download the correct software for your phone. If this process takes more than 15 minutes, the iPhone may exit recovery mode. In this case, hold down the forced restart buttons again and hold them until the device returns to this mode.

If the update works, the phone may turn on without resetting the system. If not, then in the iTunes window, click “Restore” to restore factory settings.

Force restart the device

Your phone may be on, but just frozen. In this case, the screen may be dark and unresponsive to any actions. So first try restarting your device using the hardware keys.

Reset the machine to factory settings

If after trying to turn on the smartphone does not respond at all or the screen lights up, but the device does not boot, try restoring factory settings using the hardware buttons.

Remember: during a system reset, you may lose personal data that has not been synced to the server. Do not do this if you are afraid to erase important information.

What to do if your phone won’t turn on

Do not rush to take your smartphone for repair. Perhaps these simple steps will help revive the device.

If problems arise due to water getting into the device, do not connect it to the mains and stop pressing the buttons. Dry your phone as soon as possible and only then follow the advice in this article. If you are sure that the inside of the smartphone is dry, feel free to continue.

Put your phone on charge

Connect your phone to a wall outlet using the original charger. If within an hour the charging indicator does not appear on the display and you cannot turn on the device, check the integrity and cleanliness of the connector, as well as the condition of the power cable and adapter. Try different sockets if possible, replace cable and / or adapter.

How to force restart an Android smartphone

Press and hold the power button and volume down key at the same time for 10-15 seconds. If successful, the device will restart automatically or display a menu on the screen in which you will need to select the restart command.

To reboot some Android smartphones, just hold down the power button for a few seconds. Sometimes there are gadgets that are restarted using other keys. If the smartphone does not respond to the listed actions, type in the search engine the query “how to force restart” and add the name of your model. Then follow the instructions found.

How to Force Restart iPhone

On iPhone 8, iPhone 8 Plus, or later, hold down and immediately release the Volume Up key and then the Volume Down key. After that, press and hold the side button until the Apple logo is displayed.

On iPhone 7 or iPhone 7 Plus, hold down the Side key along with the Volume Down button for 10 seconds or more until you see the Apple logo.

On iPhone SE, iPhone 6s, iPhone 6s Plus, or older, hold down the Home key with the Side button for 10 seconds or more until the Apple logo appears.

iPhone 6 could

In addition to battery problems, the iPhone not turning on can be attributed to human error. This is especially common when the phone is carried in a trouser

The device connector is clogged with dust and dirt, and the next time you try to charge it, the iPhone just breaks. This problem is not very serious, since any service center can fix it in a few minutes for little money.

What to do, iPhone 6 won’t turn on

Unfortunately, even with such a high-tech and reliable device like the iPhone 6 Plus, an unpleasant situation can happen.

Violation of operating conditions, an absurd accident, and sometimes a factory defect, can cause a smartphone to fail. One of the most common problems is the situation when the device does not respond to pressing the “Power” key.

Sooner or later, but this question is faced by most iPhone users. The problem related to the inability to turn on the iPhone. quite common. Each generation of iPhones has its own characteristics of this problem. The first thing to do is connect your iPhone 6 to the original charger.

Most often, the culprit of the breakdown is the “Power” button itself, which has a damaged contact pad or cable. The reason most often lies in the ingress of moisture into the case or in mechanical damage to the part caused by the phone falling. Also, quite often the refusal of the smartphone to turn on is due to a serious malfunction in the software or failure of the power system controller.

Fill with liquid

Moisture on the phone or even flooding it with liquid is not uncommon. IPhone problems can begin not only when drowning it in a pond, but even when exposed to light rain. In this situation, the gadget may start to fail.

In this case, cleaning the device or component repair of the motherboard is highly desirable. In this case, it is important to stop using the phone immediately if moisture gets inside the device.

The solution to the problem is not entirely trivial, so it is recommended to contact a certified service center for help and avoid problems that may arise in the future.

Software glitch

The most common reason iPhone won’t start is a software glitch. To eliminate a software failure, you must do a hard reset of the device. To do this, simultaneously press and hold the power key and the Home key for 15 seconds. As a result, the device will reboot and will be available for normal operation.

If this does not help, then you need to try to put the device into recovery mode. To do this, hold down the “Power” and “Home” buttons for 30 seconds.

In a situation where such an elementary solution to the problem, together with a thorough charging of the battery, did not solve the problem, perhaps the reason for the non-working device is as follows:

  • the battery of the gadget is faulty (replacement with a new one is required);
  • damaged adapter or USB-cable (you need to replace the adapter or USB-cable);
  • the cable connector is dirty (it is necessary to clean the cable connector);
  • low-quality (cheap) cable (replace it with the original one);
  • mechanical damage to the connector and other mechanical damage, for example, when dropped, wet, after charging in a car, etc. (you need to contact the service center);
  • marriage (you must contact the place of purchase).

It is also possible that the iPhone may not turn on after a firmware update.

There are three different scenarios, depending on when the failure occurred during the firmware update:

  • reflash the phone again;
  • replace the faulty NAND Flash. This is a memory chip that stores all the owner’s personal data;
  • replace the failed Nor Flash. This is the memory chip of the GSM module. All parameters of mobile operators are stored there. Without these parameters, the device will not be able to call.

Why and how to decide

There are a lot of reasons why the iPhone 6 turned off and won’t turn on.

Enlarged, they can be divided into the following:

  • complete discharge of the apparatus;
  • software problems;
  • hardware problems.

Software problems are easier to solve, in a situation with hardware problems, the solution is more complex and expensive.

Power and charging problem

If your iPhone 6 can’t turn on, it’s likely a power or charging problem. First of all, you should try to charge it. over, you need to connect it to the charger for at least 20 minutes from the adapter and 30 minutes from the workstation.

After that, you need to try to start the iPhone without disconnecting from charging. If everything is normal, the display will show a lightning symbol inside the discharged battery.

When the battery of an Apple smartphone is discharged to zero, after a short charge, when you press the power button, the display shows a picture showing a socket with a lightning symbol.

The way out of this situation is to charge the device for a longer time. In this case, the charging time must be at least 3 hours.

There are situations when the connector through which the phone is charged fails when using non-original charging.

It is very important to know how you can safely charge your iPhone 6 in your car, and even more important to follow these basic rules. This leads to dire consequences. At best, the iPhone battery needs to be replaced. At worst, it is replacing the power controller or repairing a failed power circuit.

How to create an email on Yandex for free? The answer is here.

Flawless appearance (without scratches and other visible flaws) does not mean that there are no problems with it.

Alternatively, one of several loops can snap off:

  • power loop;
  • display cable;
  • battery cable.

A more serious situation is associated with a violation of the soldering on the motherboard or damage to one or more microcircuits.

IPhone users may encounter a situation where the device has turned off and will not turn on. If you do not consider the simplest options, when the battery was simply not charged on time, then, most likely, the matter is in malfunctions of the boot data block of the operating system of the gadget.

This problem can be solved by trying to restore the partition by connecting the smartphone in DFU mode.

How to crimp an internet cable Instructions here.

How to make your presentation on a computer? Create here.

Often, a hard reset will help to get the device out of this position, and if moisture or mechanical damage gets inside it, it is better to turn to professionals.