What to do if the iPhone does not turn on and the apple hangs
An easy way to solve the problem is to reboot the device using the Home and Power buttons, which must be held down and held for 10 seconds. If the reboot does not help, then an update or flashing of the device will be required. To do this, run iTunes on your PC.
Step 1: Launch iTunes on your computer and connect the USB cable (you don’t need to connect the USB cable to the phone yet). Turn off the iPhone while holding the HOME POWER buttons (on iPhone 7, you must hold HOME and. Volume)
Hold down the HOME button and connect the USB cable to the device. Hold the HOME button until the iTunes logo and a plug image are displayed on the device screen.
A notification will appear on the computer screen that the device is in recovery mode
Step 4. Now just click on the Restore button Before restoring your iPhone to factory settings, your computer will need to download the latest version of iOS from Apple’s servers. In this case, the phone will lie with the screen off and show no signs of life. Even with a good fast internet connection, the download process can take 40 minutes or more. If your internet connection is unstable or slow, the process may never complete. Connect to a faster Wi-Fi connection.
iPhone 6/7/8 / X / 12 won’t turn on lit apple on and off, how to solve?
Sometimes a glowing apple on the iPhone screen is on, it hangs and turns off, then the screen will be black, it does not respond to pressing. There are quite a few probable reasons for the appearance of this trouble. Today we’ll look at the most common iPhone won’t turn on problems and try to find a solution.
The reasons why the apple burns but the iPhone does not turn on
Before referring to the instructions, you need to understand what caused the iPhone to not turn on and the apple on the black screen burns. The following reasons are listed:
Sometimes the battery is discharged, the phone is completely discharged, so an apple appears. Try plugging in your charger and after waiting 20 minutes, try turning your iPhone back on.
The phone freezes when you turn it on, probably a breakdown of the “Power” button. Occurs when disassembling an iPhone.
The device does not boot further than the apple. problems with the power supply of the device This often happens with phones during network jumps when charging.
Charging controller is broken, there was a power outage.
Problems with the power supply circuit of the device. The device lay on the charge during a strong power surge.
Problems with the motherboard, while the phone itself may even boot sometimes and even work for a while. True, the glowing apple on the iPhone screen will appear more and more often until it stops starting normally at all.
If your iPhone won’t turn on, even after the one tried above, there remains one more way. restore iPhone in DFU (Device Firmware Update) mode. Follow the link and follow the step-by-step instructions.
There is an easier way to solve this problem, using Tenorshare ReiBoot, one-click you can enter recovery mode and exit recovery mode. Logging in or out can help you solve “the apple is on but the iPhone won’t start”.
Download Tenorshare ReiBoot for Mac or Windows from the official website. Install it. Connect your iPhone on board to your computer (or Mac) using a USB cable.
We launch the program. You will see several buttons, but only one will be active. “Enter recovery mode”. Click on it and wait for a while. You will see the iTunes logo on the display of your iPhone.
Then press the button “Exit recovery mode”. We are waiting for the time it takes to restart your iPhone. Done!
Useful software for iPhone / iPad is always in great demand among users and often ends up in the collection of selected programs. Be sure to take note of the Tenorshare ReiBoot utility. It allows you to enter or exit iPhone recovery mode in the easiest and fastest way. And it will help when standard system methods do not work.
IPhone Freezes When Turning On: Possible Causes
Ordinary iPhone users are often victims of wars between hacker teams. the very ones that develop jailbreaks. For example, the desire of the Evad3rs group to overtake the rest of the teams and release the iOS 7 jailbreak first led to the fact that the problem of freezing Apple gadgets on the logo in 2013 became an epidemic. Due to the “dampness” of the Evasi0n 7 jailbreak utility, smartphones got into a cyclic reboot. they switched on and off sequentially until the charge ran out.
Unsuccessful jailbreak and installation of a “buggy” tweak are two reasons that in the vast majority of cases cause a “white apple”!
However, if the iPhone turns on before the “apple” and turns off, this can be caused not only by a stupid attempt to “jailbreak” the device, but also a malfunction of the gadget at the hardware level. Here are some of the hardware problems that can trigger the appearance of the “white apple”:
Breakdown of the power circuit. Such a breakdown is a consequence of a sharp voltage surge. In order to protect the gadget from power circuit malfunction, do not put it on charge during a thunderstorm. Battery failure. You can extend the life of the battery if you use only original and high-quality chargers. Owners of old mobile devices are advised not to let the battery drain completely. Faulty motherboard. Such a breakdown does not immediately make itself felt. If with each launch of the iPhone the apple burns on the screen longer and longer, the user should take this as a symptom and start saving money for repairs.
The problem of the “white apple”, finally, may be due to the fact that the gadget is simply frozen. The Apple website has the following scale:
From this illustration, it is easy to understand that the manufacturer does not guarantee stable operation of the iPhone at temperatures below 32 ° Fahrenheit (which corresponds to 0 ° Celsius). If the smartphone is at a temperature of 4 ° Fahrenheit (-20 ° Celsius) for a long time, expect trouble.
The easiest way to get rid of the “white apple” caused by low ambient temperatures is to place the iPhone in a dry, warm place and leave it alone for at least 20 minutes.
How to get rid of the “white apple” if the iPhone is not jailbreakable?
If the “white apple” appears on an unjacked iPhone, the first thing the owner of the device needs to do is to reboot the smartphone and after 5 minutes try to call it. What will such a test give? It is very simple: if the call is in progress, it means that the download of the gadget is interrupted at the very last stage. therefore, it is possible to access the file system of the mobile device. And if there is access to the file system, then there is an opportunity to demolish the “buggy” applications that provoked the problem of the “white apple”.
You won’t be able to make changes to the iPhone’s file system through iTunes. You will have to use one of the alternative file managers. for example, iFunBox or iTools.
Connect the gadget to a PC and, through the file manager, erase recently downloaded applications one by one (by analogy with tweaks), alternating uninstall operations with checks.
Let’s return to the test with a call: what to do if the result of the experiment is negative and the call on the iPhone with the “white apple” does not go? Such a test result speaks of a hardware problem: only technical docks, masters of a soldering iron and a multimeter can fix it with their own hands. If you cannot call yourself a “guru” of mobile technology, you should not open the iPhone and go into the filling. you will only make it worse. Better hand over the broken “apple” gadget to the caring hands of the service center masters.
iPhone won’t turn on: apple is on and off
Salon consultants make a helpless gesture: iPhones, which do not turn on after the “apple burns”, are regularly brought under warranty. Buyers do not even know that they can solve this problem on their own. and it will take a minimum of time to fix the problem.
The notion that Apple technology is the most reliable is outdated; now iPhones are regular “guests” of service centers. One of the most common iPhone malfunctions is popularly called the “white apple”: the gadget starts up, the “apple” burns on the screen for a long time, then the screen just goes out.
Users, not knowing what to do in such a situation, immediately carry their gadgets to service centers, although they can also eliminate the malfunction with their own hands. without material expenditures or a 45-day wait for warranty repairs. How to get rid of the “white apple”?
What to do if iPhone won’t turn on after jailbreak?
Turn off your smartphone.
Hold the volume up button on the side of your iPhone.
With the key pressed, try to start the mobile device.
An iPhone turned on in this way boots without programs from Cydia. If the gadget turns on normally with the volume key pressed, the point is definitely in one of the tweaks.
It will not be possible to establish exactly which jailbreak tweak is problematic. erase the programs one by one (starting with the one that you downloaded last) and after each operation try to start the smartphone in the usual way.
If the smartphone does not turn on even with the volume key pressed, the user has no choice but to jailbreak. We talked about several ways to remove jailbreak from iPhone. in case of the “white apple” problem, it is recommended to flash the device.
Re-flashing. it just sounds scary, in fact, the procedure is quite simple:
Launch iTunes and connect the iPhone to PC with a cable.
Put your smartphone in DFU mode. If this is not done, the PC simply will not see the connected gadget. You can find detailed instructions on how to activate DFU-mode on iPhone in our article on DFU-Mode.
ITunes will notify you that iPhone has been detected in recovery mode.
Click on the “Restore iPhone” button.
iTunes itself will download and install the new firmware on the gadget. You just have to wait for the completion of the procedure.
Re-flashing in the described way is fraught with the loss of all data. the user will receive a completely “clean” device.
If the problem of the “white apple” appeared after a failed jailbreak, you should not hang your nose. In this case, you can fix the problem with your own hands. by flashing your smartphone and removing previously downloaded tweaks from Cydia.
But if the “apple” “hangs” on the iPhone, which did not go through the jailbreak procedure, for the owner of the gadget it is a wake-up call. It is very likely that the iPhone refuses to turn on due to a hardware failure, to fix which you will have to contact the service.
iPhone won’t turn on: apple is on and off
The iPhone has long since ceased to be the most reliable device in the mobile phone industry. Now these smartphones are constantly being repaired with the same problem. the device does not turn on, namely, the branded apple is on during switching on, after which the device turns off.
Even if the warranty is still present, it will take a very long time to wait for a phone with a warranty repair. Therefore, in this article we will tell you how you can fix this problem with turning on the device yourself, and because of what the device starts to start with an error.
Reasons for the appearance of the “white apple
The first large-scale iPhone freezes were in 2013. Then the devices would freeze due to a cyclic reboot of the device. From there, the same problem went, which remains relevant to this day. jailbreak.
In general, there are several main reasons for iPhone freezes:
- jailbreak error;
- using buggy firmware.
It is because of this, in most cases, that iPhone mobile devices suffer, and it is because of this that the “white apple” appears, after which the device simply turns off.
In addition, system errors of the device itself are possible, along with which an apple may also appear at boot. If the problem is in the system, then there are 3 malfunction options:
- let the power supply itself break down, most likely due to a power surge;
- the battery has deteriorated;
- breakdown of the motherboard (this problem will make itself felt if the apple starts to burn longer and longer each time).
The last reason for the “white apple” may be hypothermia of the device. The developers and designers themselves guarantee the uninterrupted operation of the device only at temperatures from 0 degrees. If the Temperature is much lower, it is better not to use the device. If the iPhone has been out in the cold, it needs to be dried and warmed up. After that, it will begin to function fully again.
How to fix download if not worth jailbreak
If no programs from Cydia were installed on the iPhone, then before you start doing something, you just need to call your mobile phone. The thing is that if there are no beeps, then the error pops up at the very beginning of the device, and the problem can be solved only through the service center. If the sponges still go, then things are much easier. This means that the loading of the operating system is interrupted at the very last stage, and in this case there is a chance to restore access to the mobile phone.
To remove all suspicious programs from a phone in this state, you must use a third-party program, since iTunes will not help in this situation. The following applications are perfect for such an operation:
It is necessary to connect the mobile device to the computer through one of the listed managers, and then uninstall applications one by one until an erroneous application is found.
How to fix iPhone boot
If the iPhone stops loading after installing an unsuccessful file from Sidia, then to restore access to the system, you must perform the following operations:
My iPhone Won’t Turn On Past The Apple Logo! Here’s The Fix.
- first of all, you need to turn off the device;
- on the switched off device, hold down the “” button, which serves to increase the volume of the device;
- while continuing to hold the button, it is necessary to start the device without releasing it in the process.
In most cases, this method helps when a white apple appears at boot due to downloading and installing one of the wrong tweaks.
If, after the performed operation, a white apple appears again when the iPhone starts, then more stringent measures are needed to restore access to the device. Most often, you have to change the firmware itself in order to demolish the installed Cydia applications. This can be done both through the service service, and on your own.
If you change the firmware through the service, then you just need to take it there, and in a day pay about 1-2 thousand rubles for the work of the master. The flashing will be completely replaced, and the device will fully function.
If you change the firmware yourself, then you should not be intimidated, there is nothing terrible and complicated about it. It is only necessary to perform the following series of operations:
- you need to launch the iTunes application using a regular cable to connect the device to the computer;
- then you need to switch the iPhone to DFU mode, through which data is transferred;
- then you need to select “Ok” in the appeared window from iTunes, where the recovery process is confirmed.
- in the window that opens, you need to click the restore device button;
Nothing else is required from the user. The program automatically finds, downloads and installs new firmware on the device. Upon completion of the procedure, the user’s iPhone will be absolutely clean, but functional.
How To Fix STUCK AT APPLE LOGO ENDLESS REBOOT Trick iOS 12 iPhone, iPod & iPad
Before you take the device to the service center when the “white apple” appears when you boot the iPhone, you must first try to fix the problem yourself. In most cases, this is possible and the process of restoring operability itself is not extremely difficult. You just need to have the desire and study a little the process of restoring the device when this problem appears. Doing it yourself can save you valuable time and money.
In order to avoid similar problems in the future, iPhone owners are advised to follow these points:
- install only verified and official programs;
- check all installed programs with antivirus;
- use the device at the optimal temperature (does not tolerate heat and cold);
- remove all unnecessary programs in time.
All these operations will help to avoid further cyclic loading of the device. It is also advised not to expose the device to physical stress or drown in water.
The battery is out of order and needs to be replaced
If you do not contact the service center, the chances of purchasing an original battery for replacement are zero. When buying a battery, be sure to check it for leaks, swelling and corrosion. If possible, check the voltage with a tester.
How to fix problems
All faults are traditionally divided into hardware and software problems. To fix software errors, we need a USB cable and a computer.
For the treatment of iron, the list will be much wider:
Why the iPhone does not turn on: what to do when the apple is on and off
For the owner of an “apple” device, the biggest nuisance is an “apple” that is always glowing on the display or, in general, a “black screen”. The device entered an infinite boot cycle or does not turn on at all. Often this is a consequence of a malfunction of the motherboard of the gadget and only a service center can help.
So, let’s figure out what problems can be when the iPhone or iPad turns off by itself, why the apple burns and goes out on models 4, 4s, 5, 5s, 6, 6s, what to do in such cases.
Why iPhone won’t turn on: make a diagnosis
Outwardly similar symptoms can be the result of completely different malfunctions. Correct diagnosis. 90% success, so below we will analyze in detail the possible options for breakdowns.
Deep discharge of the battery
The battery controller blocked as a result of an extreme discharge will not allow charging it by standard methods.
Therefore, to eliminate the problem, you will need to open the device, dismantle the battery, and check it. If the battery is in good condition, charge it with a universal charger. How to do this, let’s try to figure it out on the example of the third generation iPhone, since it is with them that the most work will be done.
- Removing the SIM card tray
- Using a screwdriver, unscrew the two screws, to the right and left of the cable connector.
The device hangs on the “apple” after a factory reset
To get your iPhone back to normal, you need to do the following:
- Turn off the device by long simultaneous pressing of the “Power” and “Home” buttons
- Put iPhone into DFU mode: Press and hold the Home and Power buttons; keep the buttons pressed for 10 seconds; release the Power button while continuing to hold the Home button; hold the Home key until iTunes detects the new device in recovery mode (approximately 10-15 seconds).
The cable connector does not work
The cause of this malfunction may be either dirt in the connector or damage to the contacts in it. To fix the problem, you need to do the following:
- Using a syringe, moisten the connector liberally with alcohol and leave for a few minutes.
- Re-wet the connector and use a medium-hard brush or toothbrush to remove any dirt.
Power button does not work
The power button consists of two elements: a film switch and a plastic pusher, it is he who sticks out of the case and you press it with your finger. When enough dirt accumulates between the pusher and the button, the pusher cannot reach the button and the iPhone will not turn on. First, let’s try to wash away the accumulation of dirt with rubbing alcohol, medical grade or isopropyl alcohol. In no case do not take vodka, eau de toilette, glass cleaner for this operation. In addition to alcohol, these liquids contain a fair share of water, it will remain inside the device and cause corrosion.
- Pour alcohol into a syringe (5 ml is enough) and putting a needle on it, drip onto the power button. After 8-10 drops have seeped under the button, press it several times, vigorously but not roughly. Dripping alcohol again. Repeat the procedure three to four times. If the reason for the inoperability of the button was contamination, it will begin to respond to pressing after the first call.
- If manipulations with alcohol did not help, the membrane switch itself is faulty and it must be changed.
- Disassemble the iPhone as in the instructions above. In the upper part of the case, unscrew the screws that secure the headphone jack, power button, volume rocker and mute switch.
If the iPhone does not boot, the apple is on, the first thing to do is try to restore the device to work by performing a hard reset. Hard Reset.
Press Home and Power (on iPhone 7 and 7 Plus, the volume down key is used instead of Home). Hold them until the device turns on. If a hard reboot does not lead to anything, move on to another method. System Restore.
The main disadvantage of restoring is deleting settings and content. If you recently made a backup, then the losses will be minimal, but still you cannot do without them. a working phone is more important. Since you are dealing with a software error, to fix it, you need to put the phone in DFU mode.
If the call does not go through, or you cannot find the files responsible for the error, then you will have to restore the iPhone to fix the problem.
iPhone won’t turn on: apple is on and off
Burn, burn clearly, so as not to go out! In our case, the opposite is true. When you turn on the Apple smartphone, a white apple lights up on a black background. But after a few seconds it goes out, and we see a dark screen again. What is happening, why the iPhone won’t turn on? Let’s try to make the correct diagnosis and “cure” our apple friend.
Alas, even such reliable technology as the iPhone is not immune from breakdowns and software failures. One of the most common problems is loading, which is popularly called the “white apple“. Its essence boils down to the fact that the iPhone does not turn on. an apple burns on the display for several seconds and goes out or lights up again. Most users immediately take their gadgets to the service center. However, in some cases, the malfunction can be eliminated on your own. without a long wait for repairs and material investments. We tell you how to fix problems with a burning apple.
How to reflash a problem iPhone yourself?
It is only at first glance that a flashing seems like a terrible and impossible task. Even a beginner can handle it. Follow the steps below:
- Launch iTunes on your computer and connect your mobile device with a cord.
- Next, you need to put your smartphone into DFU mode. If you skip this step, the computer will not see your gadget.
- iTunes will display a notification of the following character: “iPhone detected in recovery mode.” Click OK and agree.
- Select “Restore iPhone” and wait for the process to complete.
The iTunes app will download and install the new firmware. All you have to do is wait for the procedure to be completed.
How to turn on iPhone without jailbreak?
What if you haven’t jailbroken but iPhone still turns on and off? When the apple device has not been tampered with, try doing this test. Restart your mobile device and try to call it after 5 minutes. If a call is in progress, the download stops at the last stage. This is a good sign. you will be able to access the FS! So, remove any buggy applications without any problems.
Please note that in this state of the phone, iTunes does not provide the ability to change the file system. We advise you to use alternative options. iTools or iFunBox programs. All you have to do is connect to your PC and uninstall applications one by one, similar to jailbreak tweaks.
If the ring test is negative (no call), there is a hardware problem. Alas, it will hardly be possible to solve it without technical knowledge, a soldering iron and a multimeter. It is better not to go into the filling of the iPhone, but to give the gadget to the caring hands of professionals.
Jailbreak, iPhone won’t turn on. What to do?
- You need to turn off the smartphone and hold down the volume up button, which is located on the side panel.
- Without releasing the volume key, turn on the mobile device. The download will start without apps from Cydia.
- If the iPhone turns on and boots normally, the problem is definitely in some tweak.
It will not work to identify the problematic jailbreak tweak. you have to act at random. Erase the apps one at a time until the smartphone starts up in the usual way.
The appearance of the “white apple” and the iPhone freezing when turned on is not a reason to run to the master. In some cases, the problem can be solved independently by reflashing the Apple smartphone and removing the buggy application. It’s bad if you haven’t jailbroken your iPhone, and the apple still burns. This is an alarm bell associated with a hardware failure of the device. To fix it, you will have to contact the service center.
The apple lights up and the iPhone turns off. what to do
The apple lights up on the iPhone, after which the smartphone turns off. the wording of one of the most common iPhone problems. It can appear really suddenly. Many users who have encountered a problem say on our forum that their smartphones turned into “brick” after making a call, removing some applications from the device or other very standard actions. Whatever reason brings your iPhone to a similar state, this guide will help you solve the problem.
The apple lights up and the iPhone turns off. what to do
Connect iPhone to computer with USB cable and launch iTunes. Make sure iTunes is up to date. You can check for iTunes updates on Windows by going to Help → Updates, on a Mac, from the Updates tab in the Mac App Store. You can download the current version of iTunes on the official Apple website.
Press and hold the Home and Power buttons on iPhone at the same time for 10 seconds.
Then release the Power button and continue holding the Home button until iTunes detects the device in recovery mode (about 10 seconds).
In iTunes, click “Restore iPhone” and confirm to start the restore. Important! All media and other device data will be erased. The iPhone will also have the latest iOS version for your device.
In the window that opens, click “Next” and “Agree”.
Note that initially iTunes will download the version of iOS required for the device from Apple servers, and only after that the recovery will begin. You can track the progress of the firmware download by clicking on the button in the upper right corner of iTunes.
It should also be emphasized that after connecting the iPhone to iTunes in DFU mode, nothing will be displayed on the smartphone screen. And only when iTunes downloads the firmware and starts direct recovery, the progress bar will appear on the iPhone display.
After successfully restoring the iPhone, all that remains is to make the initial setup and start using the device.
What to do if iTunes does not detect iPhone in DFU mode
There are several reasons why iTunes may not detect the iPhone in DFU mode, ranging from an old version of iTunes to a technical malfunction. Before going to a service center or starting repairs on your own, it is recommended to check the integrity of the USB cable and USB port. Ideally, you can try to connect iPhone to iTunes on another computer using a work cable.
Also, the problem might be an iTunes error. In this case, iTunes must be reinstalled, but do it correctly by removing the program components in the following order:
- Apple Software Update.
- Apple Mobile Device Support.
- Apple Application Support (32-bit).
- Apple Application Support (64-bit).
An extensive guide on how to properly reinstall iTunes is available here.
If nothing helps to determine the iPhone in iTunes in DFU mode, then there is a high probability of a technical problem. In most cases, the battery is the culprit, and after replacing it, the iPhone starts functioning normally again. For detailed instructions on how to change the battery yourself on various iPhone models, visit our website:
But be warned, there may be a problem with other iPhone components, so the best way out of this situation is to go to a service center.
Blog about modems, routers and gpon ont terminals.
Unfortunately, the reasons why the iPhone does not turn on and the apple on the screen is lit are very often problems with the hardware stuffing of the phone. And then flash it. don’t flash it, but it won’t work anyway. What could be the reason?
Unfortunately, only those who are friendly with a soldering iron and a multimeter can fix this kind of malfunction with their own hands, the rest of the users can only take it to the service center for repair.
Banal utterly, but one of the most common reasons. The user is sure that the phone’s battery is charged, but it is almost completely discharged. Try plugging in your charger and after waiting 20 minutes, try turning your iPhone back on. By the way, this is also possible in the event of a charger malfunction. The user thinks that the device is charged, but he just finally sat down. Try charging from a computer via a USB cable.
iPhone won’t turn on and apple is on. what to do?!
Tablets and smartphones from Apple have long won the reputation of being fairly reliable devices. And the iOS operating system did not give any particular reason for criticism. Nevertheless, sometimes problems do happen. electronics, whatever one may say, are capricious thing. One of the frequent occurrences is that the iPhone does not turn on and the apple on the screen burns. On this, the phone freezes and you will not be able to turn it off in the usual way. There are quite a few probable reasons for the appearance of this trouble. Let’s try to figure them out and, if possible, try to fix it ourselves.
If you have recently installed any application before, digging through the settings or tried to jailbreak, then with a high degree of probability we can say that this is exactly what causes a crash and the appearance of a glowing apple.
Very often the so-called “hard reset” helps. restarting the phone using the Home and Power buttons, which must be pressed and held for 8. 10 seconds. In more than half of such cases, the iPhone then boots up and works successfully. The main thing. do not forget to disconnect it from the computer or charger before that.
Did not help? Then you should try to reflash the device. To do this, you need to launch iTunes on your computer, and then connect your iPhone to your computer with a USB cable. then turn it off by holding the Home and Power buttons. You need to hold it until the screen turns off, after which you need to release the Power button, but do not release Home. This will put the iPhone in DFU mode. The screen will be black, but a message should appear on the computer that the device is in recovery mode. Let go of the “Home” button. In the iTunes application, click the “Restore” button, after which the process of downloading and installing the new firmware on the phone will begin.
After this procedure, you will receive a “clean” device, without settings and additional programs, and the burning apple on the iPhone should disappear.
Reset iOS settings
If the iPhone does not turn on periodically (out of 5 times no more than 2-3 freezes on the Apple logo), then before contacting the service center and experimenting with the DFU mode, it will not hurt to roll back the operating system parameters to the “factory” state. The procedure will not take even 10 minutes, and even a backup copy will not be needed: the content stored in memory will not disappear anywhere.
Reset starts from “Settings”, menu “General”. The desired section is at the bottom of the list, right above the “Turn off” button.
After the transition from the actions that appear, it remains to select “Reset all settings”, enter the PIN code (verification via Touch ID or Face ID is not available) and wait until iOS clears the parameters and restarts the iPhone.
Often, a reset is already enough to get rid of freezes and technical problems when an apple blinks or the iPhone screen starts to blank out unexpectedly. But even more often, you can’t even look into the “Settings”. iOS doesn’t even load. Therefore, it’s time to move on to universal methods.
Reasons why the Apple logo is lit and the iPhone won’t turn on
- System crash caused by software problems or recent updates to the iOS operating system. In some situations, the problem also appears when interacting with unsupported characters. we are talking about hieroglyphs sent via iMessage, on some versions of iOS leading to an emergency shutdown of the iPhone.
- Battery discharged or defective.
- The power adapter and charging cable are damaged and are not able to charge the iPhone even up to 5%, which is why the apple logo does not disappear.
- Mechanical damage: iPhone dropped and constantly reboots, remained under water for a long time, or lay for several hours in the sun or in the cold.
IOS Restore or Update via iTunes
ITunes. Apple’s media combine. is often viewed with distrust due to its button-cluttered interface and confusing navigation. In fact, the tool: it will help you filter both the entertainment media library, and will help with the recovery of a locked or non-working iPhone.
The only thing you have to deal with is downloading and installing the latest version of iTunes, and connecting your iPhone to your PC using a USB cable. Next. go to the parameters of mobile technology, presented in the “Overview” section.
It is advisable to prepare an up-to-date backup copy of the contents of the internal memory at the bottom of the interface before starting the procedure. Formally, no data can disappear when the iPhone is restored to work. But extra safety net won’t hurt. Backups are generated and stored: either on the hard drives of the computer, or in the iCloud cloud storage in the iOS settings.
Regardless of the choice, you will have to return to the top of the interface and click on the “Restore iPhone” button. iTunes will automatically download the update files and transfer the latest iOS version to mobile devices in the background. The procedure takes on average up to 30 minutes (this is due to the preparation and preliminary unpacking of files before updating or restoring). After several reboots, the problem with the “iPhone does not turn on, the apple is on and off” will disappear.
IPhone does not turn on (apple burns and goes out): from reasons to reset
Hello everyone! Today I ran into a problem. the iPhone does not turn on, the apple is on, and the smartphone itself just goes out. at first it seems to turn on, then it turns off and it goes out. And so constantly when you turn it on.
Apple mobile technology rarely encounters unsolvable technical problems and errors. But the problem with the iPhone not turning on or hanging on the apple logo has already become overgrown with legends and has become a widespread phenomenon. And that means it’s time to figure out the details and find out why the iPhone does not turn on, the apple burns and goes out, and how to save mobile equipment using iTunes.
IPhone Recovery via Third Party Software
Unofficial software tools handle iOS problems like iTunes. And sometimes they offer even more: an intuitive interface, a predictable course of actions and recommendations for beginners.
The same diagnostic service ReiBoot, adapted for computers with Windows and MacOS, offers in a matter of moments:
- Run DFU mode without holding the buttons on the iPhone case, but through a special menu in the interface.
- Return to standard mode or go to a special section with “Support”. where tips appear for situations when an apple is on or mobile equipment does not respond to pressing.
It is easy to interact with ReiBoot: the developers first suggest connecting the iPhone to the computer using a cable, and then. in the interface that opens. select “Enter recovery mode”.
How you have to proceed further depends on the reason for the appearance of the non-disappearing logo and the version of the iPhone (4, 5S, 6, 6S, 7 or newer). But with a 99% probability, ReiBoot will first download the stable version of iOS from the official Apple servers (either new, or the current one, but “reset” to factory settings).
Then it will automatically start the update process. The procedure takes from 15 to 30 minutes, depending on the speed of the Internet, the amount of space occupied on the internal memory of the iPhone and the number of errors found in iOS.
General way to solve iphone 11 stuck on apple
Next, we will consider each of these methods individually, so that you can choose the one that suits you.
Updating or Restoring iPhone 11 via iTunes.
Using this method may delete data stored on your phone, so back up your iPhone in advance if possible. If this is not possible at the moment, after restoring your phone, you can use only the last created backup, new files will be irretrievably lost. Before starting work, make sure that you have the latest version of the program installed. To update or restore iPhone using iTunes, follow the instructions below.
Launch iTunes on your computer. Connect the USB cable to the PC, but don’t connect the iPhone itself yet.
Put your iPhone into recovery mode. The methods will vary slightly depending on the model. Let’s consider each of them.
IPhone 8 or later: Hold down the side button and one of the volume buttons and wait for the Power off slider to appear on the screen. Move the slider to turn off your phone. While holding down the side button, connect your iPhone to the pre-connected USB cable. Do not release the side button until the recovery mode screen lights up.
IPhone 7 and 7 Plus: Hold the side / top button of the device and wait for the Power off slider to appear. Move the slider to turn off your phone. While holding down the volume down button, connect your iPhone to the pre-connected USB cable. Do not release the volume down button until the recovery mode screen lights up.
IPhone 6s or earlier: Hold down the Side / Top button and wait for the Power Off slider to appear. Move the slider to turn off your phone. While holding down the Home button, connect your iPhone to the pre-connected USB cable. Do not release the Home button until the recovery mode screen lights up.
After successfully putting iPhone into recovery mode, wait on the device screen for the prompt to restore or update iPhone. Select the Update option to reinstall the operating system and save your phone data. If this option did not work, repeat the previous steps, and then select the “Restore” option. In this case, files and settings will be erased, and the iPhone itself after restarting will need to be restored from a previously created backup or set up as a new one.
If the above methods failed to help, and you do not know what to do if the iPhone does not turn on, but the “apple” hangs, then we offer you the easiest and most effective way to solve this problem.
What to do if the iPhone 11 does not turn on, the apple is on and off?
Smartphones have firmly entered the life of a modern person, we spend the whole day, periodically or for a long time looking at the screen of our iPhone. All information is downloaded to the phone and is continuously used by us. Images, audio and video recordings, contacts, text and voice messages, documents. all this is “securely” stored in our iPhone, with which we are inseparable. But as soon as one system failure occurs, all data is inaccessible, and even at risk of loss. What to do and where to run if the iPhone does not turn on, the screen lights up “apple”, and then it turns off? In this article, we will look at the main reasons for the iPhone freezing on the Apple logo during boot, so that you can avoid repeating this situation later, and also suggest the top 3 ways to get out of it. You want to know What to do if the iPhone 12 is frozen on an apple? Click here!
Why iPhone 11 Won’t Turn On Apple Burns?
First, let’s analyze the possible reasons why the iPhone 11 does not turn on, and the “apple” is on the screen.
If the iPhone does not turn on, and at the same time the “apple” is lit on the screen and goes out, then, perhaps, the reason lies in the lack of battery power. To check this version, connect the phone to the charger and after a while try to turn on the iPhone again.
If, while connecting the device to the charger, there was a power outage, a power surge, then this can cause device errors and cause the iPhone to freeze on the “apple”.
Sometimes during an “unauthorized” disassembly of the iPhone (by yourself, and not in a service center), some parts break down, in particular, the phone’s power button. Then the user may notice that the iPhone restarts on the “apple” or the “apple” is lit on the iPhone, but it does not turn on. In this case, it is better to contact the service center for diagnostics and replacement of the part.
In this case, the device may still work, but over time, the apple logo will appear on the screen more often, and will soon freeze on it, finally losing its functionality.
There is not enough free space on the phone
During the installation of updates on the iPhone, there may not be enough space available, then the restart cannot be carried out and the phone freezes at the logo.
If the reason is still not in the battery, and mechanical damage has nothing to do with it, you can try to solve this problem yourself. Undoubtedly, you can immediately contact the Apple service center in your city to repair your phone. However, this will most likely delete all of your iPhone’s data, so be sure to back up all files in your device beforehand. If you decide to fix the problem on your own. by choosing one of the methods described in this article, you can save both time and money, and also keep your device data safe and sound. So, there are several main ways to solve the problem “iPhone 11 is stuck on the” apple “.
Hard (forced) reboot of the device.
The first thing to try whenever your iPhone crashes is to reboot your phone. If you cannot reboot the iPhone in the standard way, then you should use the special keyboard shortcuts of the device to force the phone to reboot. The methods for hard resetting iPhone differ slightly depending on the model. Let’s consider each of them.
To restart iPhone 11, X, XS, XR, 8, and 8 Plus:
Quickly press and release the volume up button.
Repeat this procedure for the volume down button.
Hold the side button until the Apple logo appears on the phone screen.
Press the side button and the volume down button at the same time.
Hold the buttons until the Apple logo appears on the phone screen.
To restart iPhone 6s and 6:
Press the side button and the Home button at the same time.
Hold the buttons until the Apple logo appears on the phone screen.
To restart iPhone SE, 5s and earlier:
Press the top button and the Home button at the same time.
Hold the buttons until the Apple logo appears on the phone screen.
If restarting the device did not help, the “apple” is still on on the iPhone, and it does not turn on, you can try updating the operating system of the device or restoring it to factory settings using iTunes, which is available to every user of “apple” products.
What to do if iPhone is stuck on Apple logo
Tenorshare’s ReiBoot is a dedicated application designed to fix any operating system error or glitch on iOS devices. The unique advantage of the program is the minimum effort on the part of the user: you just need to make a couple of clicks of the computer and the seemingly insoluble problem will already be eliminated from your iPhone.
So, let’s look at the very few clicks that you need to make in this program. First of all, download the program from the official Tenorshare website and install it on your computer. Next follow these steps.
Step 1 Run the utility on your PC. Connect iPhone to computer with USB cable and unlock it.
Step 2 In the program window, select the “Enter recovery mode” option. Wait until the iTunes icon appears on the screen of your iPhone.
Step 3 After that, in the program window, click on the “Exit recovery mode” option that has become available. After that, your iPhone will be restarted normally and available for use.
As you can see, the instruction is extremely simple and does not require any special knowledge or special efforts. At the same time, the result cannot but please. 100% return of iPhone functionality in a matter of minutes. However, in addition to this function, the program has a number of other features that may interest you and encourage you to have this utility in your “desktop” programs.
- The program supports all iOS devices: iPhone, iPad, iPod, including recently released models such as iPhone 11.
- The utility is compatible with all versions of iOS, works on a computer with both Windows and Mac.
- Can be used to fix a wide variety of iOS system crashes and errors: more than 50 different system bugs in total.
- A unique feature of the utility is the ability to fix the device’s system without losing the data stored on it. an indispensable feature in a situation where it is impossible to make a backup.
- In addition to updating the system, the program allows you to perform the reverse operation. downgrade system, just as quickly and efficiently.
- The program is able to help in case of problems with TVOS.
- User-friendly interface, ease of use, tips accompanying the user in the process make the use of the utility pleasant and comfortable.
- The availability of the program installation in Russian expands the circle of potential users.