Lightning Triangle Blinking on Printer

What does the triangle mean on the printer? An exclamation mark in a triangle is lit on the printer: how to fix

The indicator lights, which are located on the control panel, indicate a certain state of the printing equipment. The lights may be on all the time, off, or on depending on the printer’s status. Blinking indicates the status of the equipment or probable errors in operation.

Exclamation mark in triangle on printer

In certain cases, users do not know why the triangle on the printer is lit up or blinking. Most often this problem occurs during the operation of laser equipment and in order to solve it, sometimes you just need to know some of the main reasons.

The indicators on the panel are necessary to indicate malfunctions in certain nodes. Light bulbs can react in different ways to different hardware configurations. For example, indicators can blink or stay on for a long time. Sometimes the indicators do NOT show any signs of “alarm”.

Flashing

If during operation the all-in-one printer stops working and a triangle starts flashing or the letter P appears on the screen, then first you need to disconnect the device from the mains. Then you need to carefully remove the cartridge and inspect the printer for a paper jam.

If you find pieces of paper, and probably the entire letter, you need to carefully get it out. It is necessary to pull out very carefully, as there are different sensors in the device, which can be broken. After a visual inspection, restart the printing device. The exclamation mark with lightning in the yellow triangle may also flash.

Is burning

Most often, the main prerequisite is a chip, which is located on the ink control cartridge, which needs to be replaced with a new one during refueling.

How to fix the problem

Main faults and solutions:

  • If a red light on Hewlett Packard devices illuminates to indicate “Warning” (in Canon models, the exclamation mark lights up in this case), it may be that there is a cartridge in the printer. To fix this error, you only need to open the case cover, gaining access to the connector, which is necessary for consumables. Then, from the newly installed cartridge, you need to remove the protective film and reinsert it into the opening, until you hear a click.
  • If both lights on the panel light up, that is, red and green, at the same time, then the device initializes.
  • If the green light blinks, then for printing the equipment is processing data or receiving it.
  • Sometimes it happens that the green button starts to light up all the time, and the red one only flashes sometimes. this is a general error in the printing equipment or a paper feed malfunction. This is most often accompanied by paper jams.
  • If the red button on the panel illuminates intermittently, this indicates that the cartridge is not inserted correctly. over, such a signal may appear when the housing cover was not fully closed. To fix this problem, you will need to remove the cartridge and insert it back into the connector.
  • If the red button on the Hewlett Packard models starts blinking, it may be because the tape has NOT been completely removed. To remove it from the printing equipment, you will need to open the housing cover. In addition, the packing tape must be removed from the trays.
  • If both lamps on the printing device light up all the time, then this sometimes indicates some serious problem, which most likely cannot be fixed on your own.
  • It should be noted that in Canon models, a triangle is responsible for determining the fault code. Accordingly, if this symbol lights up on the printing equipment, then you need to write down the code displayed on the screen of the device, then read what it means in the instructions for the equipment.
  • In this case, in Epson printing models, instead of two lamps, a drop lights up when there is an error. For example, if it blinks when the cartridges are completely refilled, then in order to fix this problem, you must reset the ink counter using some service software, for example, Print Help.

If any of the buttons on the printer starts to light, then first of all it is necessary to get acquainted with the operating instructions. But in cases where the cause of the malfunction is not precisely determined, it is advisable to contact the Repair Shop, in which the printing device can be examined for certain malfunctions.

Subscribe to our Social Networks

Triangle Meaning | SunSigns.Org

What does triangle mean? History

Celtic cultures use a large number of symbols with triangle themes. They have a triskelion and a triquetra. The Trinity can be seen at several Celtic knots. The Greeks used the triangle as a symbol for the delta and saw a doorway in it. Aristotle used the triangle in his concepts of the five elements. Triangle. Another one of the oldest and most widely used symbols. It can be used more often than other base characters due to its versatility.

Value

The triangle as a symbol is associated with the number three for obvious reasons. He can depict different things if he is oriented in different directions. It can symbolize the floor depending on how it is located. When pointed upward, it symbolizes masculine strength, fire and a false idea of ​​God. Christians will see the triangle as a symbol of the Trinity.

If the point is downward, it will represent the sexual nature of women, water and religions associated with goddesses. The triangle is called a blade when it is upward. An ascending triangle can represent ambition and growth. It will symbolize the power of men and fire. The triangle pointing up is of phallic origin.

A triangle is called a bowl when it points downward. The triangle will represent water because in this position it flows downward. It can symbolize heavenly grace and the womb. Downward pointing triangle. One of the oldest symbols of the divine power of a woman.It is an ancient symbol that personifies the genitals of the goddess.

Courtesy: http://rayhoughtonphotography.Wordpress.com/2012/07/16/implied-and-real-triangles/

The triangle is connected to the number three, which can represent true wisdom. This is often associated with the idea of ​​the Trinity. The triangle can represent different forms of the Trinity. It can symbolize the connection between body, mind and spirit. Christians will view the triangle as the Father-Son-Holy Spirit trinity. He can represent the Father-Mother-Child relationship. He can symbolize time as past-present-future. It can symbolize the phases of the moon when it rises, decreases or is full.

The triangle can represent Intelligence, Love and Power. It can symbolize emotions, feelings and thoughts. The triangle will represent the three stages of a woman’s life in Virgo, Mother and Old. He can symbolize Love, Truth and Wisdom. He can represent the Creator, the supporter and the destroyer. He could symbolize Creation, Destruction and Preservation.

The triangle can symbolize how teamwork can bring people together to use their strongest qualities. He can represent the process of development and culmination of spiritual change. It can symbolize the achievement of dreams and ambitions.

The triangle can be a very versatile symbol with different meanings. It can symbolize balance and creativity. It can symbolize the ascent, manifestation, enlightenment or integration of something. A triangle can represent proportion, something climactic and subjective.

Other symbols, such as circles and squares, do not have the same universal character as a triangle. The triangle can mean polar opposites. The inverted triangle is feminine, lunar, passive and symbolizes the Mother. Right side of the triangle. Masculine, sunny, active and symbolizes the Father.

What does an exclamation mark mean on a printer

During the operation of any technically complex device, many questions and problems arise. Let’s look at situations when an exclamation mark flashes on the printer, or a triangle with an exclamation mark on the printer is lit, or, as an option, an exclamation mark in a triangle is lit on the printer. In general, this is a signaling of almost identical faults.

Why is the exclamation mark on my HP printer

Printers and all-in-one printers from HP are unpretentious in work, and serve quite a long time with careful handling. The HP LasreJet Pro M125RA is NOT an exception. It did not cause any particular complaints from users when the drivers were installed correctly.

All-in-one printer HP LasreJet Pro M125RA

The disadvantage of this printer is a chip installed on the cartridge to control toner consumption, which must be replaced with a new one during refilling. That is why we recommend refueling in specialized service centers. If these rules are not followed, the display may be indicated by a burning letter P, which signals a malfunction with the cartridge.

If you are using the all-in-one printer HP LasreJet Pro M125RA, and it stops working, the exclamation mark is highlighted in red, or the letter P is probably on the display, then first of all, you need to disconnect the printer from the network. Then you need to carefully pull out the print cartridge and see if there is a paper jam somewhere.

Paper jams in the printer

If you find leftovers or scraps of paper, or maybe a whole sheet, jammed in the printer, you must carefully remove all of it. It is necessary to pull as carefully as possible, since the printer has various sensors that can be damaged. After visual inspection and installation of the cartridge, try to restart the printer.

Xerox Printer Problems

Typically, users complain about this error after moving the printer from one location to another, or when refilling the cartridge. The main problem, why it may be considered a paper jam by the printer.

The exclamation mark is on

Again, first of all, disconnect the printer from the mains, remove the cartridge and visually inspect the inside of the printer for scraps of paper. If you find them, you need to carefully remove them and clean the printer. Then we Install the cartridge in place and perform the process of initializing the printer.

If during the inspection no foreign objects were found, and the cartridge was refilled, then the chip may not have been replaced. To control the toner consumption and its remainder, a control chip is installed on the factory cartridge. When the process of refilling the cartridge is carried out, this chip must be replaced.

Xerox Printer Cartridges

If the chip has been replaced, then the following steps must be taken:

  • Remove the cartridge, carefully inspect all the contact pads on it, dirt may be clogged and the device does not see the cartridge;
  • In the printer itself, also clean the contact pads, focusing on the cartridge. If necessary, clean them, you can wipe them with alcohol or acetone;
  • View all limit switches that, when installing the cartridge, must be pressed by the stops. They may have ignited and cannot give a signal to the printer interface. Wiggle them gently with your fingers, the switch should move freely without hooks and smoothly.

Xerox Phaser 3117 Printer

If these steps do not work, the printer still gives an error, you can try to install the cartridge from a second printer. Or it is worth paying attention to the nearest service center. There you will be helped to deal with the repair quickly and efficiently.

In conclusion, I would like to note that this error appears when there are problems with the cartridge or with a paper jam. Be careful when using and refuel your printer at specialized service centers. This will help to avoid most of the minor problems and problems, as well as extend the life of your device.

READ  The default printer is disabled how to enable

What does the exclamation point triangle mean on the printer? An exclamation mark in a triangle is lit on the printer: how to fix

The indicator lights, which are located on the control panel, indicate a certain state of the printing equipment. The lights may be on all the time, off, or on depending on the printer’s status. Blinking indicates the status of the equipment or probable errors in operation.

Exclamation mark in triangle on printer

In certain cases, users do not know why the triangle on the printer is lit up or blinking. Most often this problem occurs during the operation of laser equipment and in order to solve it, sometimes you just need to know some of the main reasons.

The indicators on the panel are necessary to indicate malfunctions in certain nodes. Light bulbs can react in different ways to different hardware configurations. For example, indicators can blink or stay on for a long time. Sometimes the indicators do NOT show any signs of “alarm”.

Flashing

If during operation the all-in-one printer stops working and a triangle starts flashing or the letter P appears on the screen, then first you need to disconnect the device from the mains. Then you need to carefully remove the cartridge and inspect the printer for a paper jam.

If you find pieces of paper, and probably the entire letter, you need to carefully get it out. It is necessary to pull out very carefully, as there are different sensors in the device, which can be broken. After a visual inspection, restart the printing device. The exclamation mark with lightning in the yellow triangle may also flash.

Is burning

Most often, the main prerequisite is a chip, which is located on the ink control cartridge, which needs to be replaced with a new one during refueling.

How to fix the problem

Main faults and solutions:

  • If a red light on Hewlett Packard devices illuminates to indicate “Warning” (in Canon models, the exclamation mark lights up in this case), it may be that there is a cartridge in the printer. To fix this error, you only need to open the case cover, gaining access to the connector, which is necessary for consumables. Then, from the newly installed cartridge, you need to remove the protective film and reinsert it into the opening, until you hear a click.
  • If both lights on the panel light up, that is, red and green, at the same time, then the device initializes.
  • If the green light blinks, then for printing the equipment is processing data or receiving it.
  • Sometimes it happens that the green button starts to light up all the time, and the red one only flashes sometimes. this is a general error in the printing equipment or a paper feed malfunction. This is most often accompanied by paper jams.
  • If the red button on the panel illuminates intermittently, this indicates that the cartridge is not inserted correctly. over, such a signal may appear when the housing cover was not fully closed. To fix this problem, you will need to remove the cartridge and insert it back into the connector.
  • If the red button on the Hewlett Packard models starts blinking, it may be because the tape has NOT been completely removed. To remove it from the printing equipment, you will need to open the housing cover. In addition, the packing tape must be removed from the trays.
  • If both lamps on the printing device light up all the time, then this sometimes indicates some serious problem, which most likely cannot be fixed on your own.
  • It should be noted that in Canon models, a triangle is responsible for determining the fault code. Accordingly, if this symbol lights up on the printing equipment, then you need to write down the code displayed on the screen of the device, then read what it means in the instructions for the equipment.
  • In this case, in Epson printing models, instead of two lamps, a drop lights up when there is an error. For example, if it blinks when the cartridges are completely refilled, then in order to fix this problem, you must reset the ink counter using some service software, for example, Print Help.

If any of the buttons on the printer starts to light, then first of all it is necessary to get acquainted with the operating instructions. But in cases where the cause of the malfunction is not precisely determined, it is advisable to contact the Repair Shop, in which the printing device can be examined for certain malfunctions.

Subscribe to our Social Networks

What does the warning triangle with an exclamation point mean?

Thanks for the answer and the link. I figured it out, but I didn’t know how to fix this problem. I contacted my ISP again, spoke to a different technician than before, and he found that I had the wrong hostname in Mail Accounts Incoming Mail Server Settings. Once I entered the correct ones, the pending messages hit my inbox, etc. And now they are displayed.

However, the messages that disappeared from my inbox and sent to my first attempt to switch from POP to IMAP did not appear. I contacted Apple support because of their “chat”, but advise that I cannot recover them. Fortunately, some of my posts that I have tagged can still be read. Similarly, I can read the one for which I have created mailboxes. But I would still like to know if anyone else has any suggestion on how to recover the missing messages. It’s an annoying coincidence that two days before I first tried to switch from POP to IMAP, I deleted messages from my web server, so I also can’t recover them from there!

Red triangle with exclamation mark on my printer. HP Support Community

I see that you are having trouble with the Attention light on your printer blinking. I would like to help you today.

This error indicates that the cartridge door is open or other errors exist.

Did anything happen in the blinking? (Paper jam, toner replaced)

Check for paper jams. Here is a document to look for locations.

Attention light blinks during a paper jam.

Did you manage to print the hardware self-test?

Can toners be turned over while pressing the toner color button on the printer?

If you need more help just let me know.

How is the printer connected? (USB / Ethernet / Wireless)

Have a good day!
Thanks.

I work on behalf of HP

Click the “Like” icon below to say “thanks” for your help!

Yellow triangle with exclamation mark. Realitycapture support

UPDATE: Automatic updates for sensordb.Xml since version 1.0.2.2742: Version 1.0.2.2742 RC release

Yellow triangle with exclamation mark in my image list in 1D panel.

This means your camera (lens / chip size) has NOT been added to the software database yet, which is a minor issue. If you see the 35mm equivalent in the image information (1D or 2D panel), then you are fine. If you DO NOT see the 35mm equivalent there and you have a “focal length” in EXIF ​​/ XMP, you can help RC calculate 35mm equivalent, added camera / lens model to its database. Adding this information will remove the yellow triangle.

What is the 35mm equivalent for?

RC uses 35mm equivalent as “soft” for image registration / alignment. If there is no 35 mm focus, then simply do not use Prior. This can cause problems if there is no depth in the image / flat scene, or the camera is exposed to critical / near-critical movement, then off-camera tends to deviate slightly.

Do I need to add my camera information to the database?

All the need to add each camera to the database. If the camera saves an equivalent focal length of 35mm in the image file, the RC reads it from there. You should add a new entry if:

Where can I add information to the new camera model?

Add a new term to the sensordb.Xml file with the camera model name, focal length (and camera distortion). Save changes and restart the program. For more information on the “Camera Database Enhancements” procedure, see the Corresponding Help section built into your RC.

This is how the yellow triangles look next to the image names in the image list in the 1D panel:

As we already know, the triangle is displayed due to the lack of information about the focal length of the camera in the RC database. This can be easily and quickly fixed by adding information about the width of the camera ccd sensor to the database. Clicking the name of an image in the list of images (you can see this image by selecting the 1D view in the upper right corner of the left layout window) will display the Selected Inputs information panel:

In the screenshot above, we see the camera model name: NIKON CORPORATION NIKON D90 (the size of the image sensor claimed by the manufacturer is 23.6 x 15.8 mm), which is currently not in our database. We can access the sensor database via Program Data, in our case located on disk (C :).

The database is in XML file format that can be opened with any text editor. As you can see, the NIKON CORPORATION NIKON D90 camera is missing and needs to be added.

Here’s our new line:

Now we need to save the XML, reopen the project in RealityCapture and the problem should be resolved.

If you are NOT a computer administrator and you have access to change the settings of the program data, first try saving the sensordb.Xml file to a different folder, and then replace the old file with the new one.

The yellow triangles are gone. Mission Complete:

When to use exclamation marks

In a famous episode of Seinfeld, Elaine’s character had a falling out with her boyfriend, which ultimately led to a breakup when He did not use an exclamation mark in messages left to her that her second had a child. It is clear that he could be helped by some guidance on the correct use of the exclamation mark.

Fortunately, the guide below should save you a similar fate by helping you know when and how to use the exclamation mark to emphasize sentences.

What is an exclamation mark?

Exclamation point. It is a type of punctuation mark that is placed at the end of a sentence. Other examples of related punctuation marks include periods and question marks, which also appear at the end of a sentence. An exclamation point, also called an exclamation point, essentially looks like a period with a vertical bar above it:!

Although exclamation marks were introduced into English in the 15th century, they didn’t even exist as a separate key on standard typewriters until the 1970s (obviously, people just weren’t that excited back then!). Fortunately, exclamation marks now appear prominently on computer keyboards on the key.

When to use exclamation marks

Originally, exclamation marks were called “admiration notes.” They are still used today to express excitement. They are also used to express surprise, surprise, or other strong emotions. Any exclamation point can be followed by an exclamation point to add extra emphasis. In the end, not “I’m excited!” convey much more “I’m excited.”

READ  Epson printer prints with stripes what to do

They are usually used after interjections (words or phrases that are used to exclaim, command, or protest). Interjection includes terms like oh, wow and boy.

For example, “Wow! This is an interesting grammar. Boy! I wish I had learned this earlier. Oh! That’s right, I did just that “.

When used in a quote, exclamation marks Should be inside the quotes: Joe said, “I really love pizza! “

Frenzy with Multiple Exclamation Marks!

Exclamation marks appear at the end of sentences. Usually only one exclamation mark is used. In informal writing, people often use one (or more) to emphasize their excitement.

For example: “No. I told you not to put metal in the microwave! »Certainly understands the point and has a much greater impact when you run for a fire extinguisher.

Informally, exclamation marks can also be used in conjunction with question marks to express shock, protest, or anxiety.

For example: “What do you mean you forgot your plane tickets. “

There is some controversy as to whether exclamation marks should belong to the Official Writing Form or not. Most generally accepted grammar rules say they do NOT belong to them, or at least they should be used with caution. All sorts of arguments have been made against the exclamation mark. From the fact that the letter should create its own emphasis, in the belief that the exclamation mark will distract the reader.

However, some prolific writers do use exclamation marks freely in their work, and one of the bestselling authors, Tom Wolfe, is known for being a big fan of the exclamation mark. Comics often use exclamation marks to accent and liven up their pages.

Some well-known brands include an exclamation mark in their names. For example Jeopardy! Much more interesting than just Jeopardy and Yahoo! Really should have this exclamation mark accompanying this.

While a few exclamation marks may be acceptable in creative writing, it is probably best NOT to use them in very formal or academic writing.

Sample sentences

Here are some examples of sentences that use exclamation marks:

Yes i will marry you!

Oh! This is a gorgeous new dress.

Wow! Can’t believe I bumped into you here.

No! I wasn’t going to lock myself out of the house.

Stop! I really don’t want to get wet. DO NOT throw me in the pool!

The cat kept meowing! Loud and i could not sleep.

When to use exclamation marks
.

What does an exclamation point triangle mean on a printer. An exclamation point in a triangle on a printer. Exclamation mark in triangle on printer

During the operation of any technically complex device, many questions and problems arise. Let’s look at situations when an exclamation mark flashes on the printer, or a triangle with an exclamation mark on the printer is lit, or, as an option, an exclamation mark in a triangle is lit on the printer. In general, this is a signaling of almost identical faults.

If you are using the all-in-one printer HP LasreJet Pro M125RA, and it stops working, the exclamation mark is highlighted in red, or the letter P is probably on the display, then first of all, you need to disconnect the printer from the network. Then you need to carefully pull out the print cartridge and see if there is a paper jam somewhere.

Paper jams in the printer

If you find leftovers or scraps of paper, or maybe a whole sheet, jammed in the printer, you must carefully remove all of it. It is necessary to pull as carefully as possible, since the printer has various sensors that can be damaged. After visual inspection and installation of the cartridge, try to restart the printer.

Xerox Printer Cartridges

If the chip has been replaced, then the following steps must be taken:

Xerox Phaser 3117 Printer

If these steps do not work, the printer still gives an error, you can try to install the cartridge from a second printer. Or it is worth paying attention to the nearest service center. There you will be helped to deal with the repair quickly and efficiently.

Outcome

In conclusion, I would like to note that this error appears when there are problems with the cartridge or with a paper jam. Be careful when using and refuel your printer at specialized service centers. This will help to avoid most of the minor problems and problems, as well as extend the life of your device.

The red light on the printer is on

Sometimes users of printing devices such as printers try to find answers to questions about why the red light on the printer is flashing or on. Usually a problem of this kind is encountered in the process of using devices of laser models, and to solve it, it is enough to pay attention to a number of fundamental points. In general, light indicators (two bulbs), which are located on the panel, serve to transmit information in certain nodes of the device. These indicators react differently to various changes in the state of the apparatus. For example, they can blink or light up for a long time. In some cases, these 2 lights do not show any signs of “alarm”.

Causes and their elimination

So, if you notice that a red button is lit on an HP printer, which means “Warning” (for Canon printer models, an exclamation mark is lit in this situation), then it is possible that your printer has a cartridge. To fix this problem, you just need to open the printer cover and gain access to the opening for consumables. Further, a special protective film should be removed from the new cartridge, and then installed in the opening intended for it until the moment you hear a characteristic click.

If two buttons flash intermittently on the printer panel, i.E. Green (“Ready”) and red (“Warning”), and at the same time, the reason is that the printing device is in the initialization process.

If you notice that the green button has started blinking, please note that the device for printing is currently processing data or receiving data. It also happens that the “Ready” light is on constantly, and the “Warning” only flashes occasionally. such indicator signs indicate a general error in the device or a paper feed error. This situation, as a rule, is accompanied by paper jams that have already been picked up by special rollers.

If a red light periodically starts to glow on the panel of the device, then this may indicate the presence of Incorrect installation of the cartridge. In addition, a similar signal appears also if the access cover to the consumable items is not closed tightly enough. To fix this problem and return the printing device to working condition, you should remove the cartridge from it and put it back in place.

If the red light on your HP product starts blinking, the problem may be with a paper jam. To solve the problem, remove any loose paper from the special tray. Remove the ink supply from the printer and remove all sheets. In addition, this indicator may also flash due to NOT completely removed packaging material, incl. Special tape. To remove it completely from the inside of the printer, open the top cover to access the consumables. In addition, packing years must also be removed from the input and output trays.

Incorrect operation of the sensors that are responsible for closing the case may also be reflected in the fact that the “Warnings” light on the printer panel is constantly on. If both indicators of the device are constantly on, then this may indicate some serious error, which is unlikely to be eliminated on our own.

It should be added that in printing devices from Canon, a triangle responds to the display of an error code. Therefore, if you notice that a triangle with a lightning is on on the printer, then remember the code that will be displayed on the printer’s display, and then find its detailed description in the instructions for the device. But for models from Epson, instead of the green and red indicators, as well as the triangle, if there is an error, a morgue begins.

For example, if a drop of the device starts blinking with a full cartridge, then in order to solve the problem, you should reset the waste ink counter of the “diaper”, Using some service program, for example, PrintHelp.

Thus, office equipment indicators promptly inform us about the presence of certain problems. Many of them can be eliminated on their own even in the absence of certain skills.

So, if a light on your device starts to light up that has NOT been lit before, first of all, read the user manual. But in cases where the reason is not specifically established, it is better to use the services of a service center, where your device will be carefully examined for the presence of certain defects.

Light bulb, lightning, blob and exclamation mark

Many have not yet had time to understand well ordinary stationary printers, when they were replaced by mobile devices. the family of HP OfficeJet 100, 202, 252 printing machines, etc. In terms of printing, the latter are practically NOT different from their predecessors, except that now they can be used wherever and whenever.

It’s not hard to guess. mobile devices are equipped with a battery, and the manufacturer has placed a new lightning-shaped indicator (light) on the front panel of the printer. If before many people were put in a difficult position by the blinking of the droplet indicators, now they also have to deal with the flashing “lightning”.

Let’s deal with two questions at once. with Flashing “lightning“, and Flashing “droplets”.

Lightning light on an HP printer

A lightning bolt is an indication of the battery charging status. There may be another indicator next to this indicator (depending on the printer model). it is shown as a battery. The latter shows the state of the battery. charged or DISCHARGED, charge level. This should be borne in mind to avoid confusion. If the “battery” light is absent, then the lightning-shaped indicator performs two tasks at once. it indicates both the battery charging status and its charge level.

Let’s say there is no battery-shaped light on the front panel. Then the lightning indicator can have the following states:

  • Solid green. This means the battery is between 41% and 100% charged.
  • Solid amber. The battery is between 10% and 41% charged. In this case, the printer is recommended to be recharged.
  • Solid red. Critically low battery level. here 2 to 10%. With such a charge, it is better NOT to go anywhere with the printer. It will not print even 10 pages and will interrupt at the most inopportune moment.
  • The indicator is red and blinking. The reason is that the battery charge level drops below 2%. Blinking indicator. persistent signal that the printer needs to be recharged urgently.

In addition, it should be added that this indicator may be solid yellow. this is a sign that the battery is being recharged. If the “lightning” does not light up yellow when the printer is connected to the mains, this means that there are problems with the cable. it is not plugged into the charging port well enough, or there is a problem in the device’s own power system (then the service center will help).

Thus, a blinking lightning (or “battery”) light is only a signal of a low battery charge level, i.E. Nothing wrong with that. However, a hardware malfunction of the printer can also lead to this (Charge, not Charge, and the “lightning” still flashes).

READ  Printer scanner copier fax color printing

Drop indicator on an HP printer

There are usually two bulbs with a drop image (for all HP mobile full color printers). Their main task is to display the status of cartridges. They can also indicate any malfunctions in the operation of the printer as a whole (in this case, along with the “drops”, other indicators on the front panel usually light up or blink).

When one of the two lights is blinking, the following problems may occur:

  • Left light blinking. Full color (tri-color) cartridge error present.
  • Right light is blinking. Borderless printing error or problem with black or photo print cartridges (if one is currently being used).

To troubleshoot cartridge problems, do the following:

  • Check if all the ink tanks are in place. To do this, simply open the top cover of the printer. If absent. Install.
  • If the cartridges are in place, we take them out and reinstall them (they may have been installed incorrectly or moved out of place when transporting the printer).

If the previous step did NOT work, you need to programmatically align the cartridges. This is done to ensure uniform ink distribution during printing. This can be done through a special utility that is automatically installed on the computer when installing drivers on the printer.

To start the alignment process, follow the instructions:

  • Open the HP Solution Center utility, which is located (for Windows) at: Start menu, then All Programs, then HP Solution Center.
  • Here we press the button “Printer Tools”.
  • Next, select the “Align cartridge” option. The alignment process will start, which will take a little time.

If after all the manipulations the right indicator blinks, this may be due to an error when trying to print without borders (a technique in which printing is performed on the entire sheet without edge margins). This usually happens when a user tries to print an image that is larger than a sheet of paper. To solve this problem, you need to do the following:

lightning, triangle, blinking, printer
  • Load the paper into the tray and move the width guide to it.
  • Directly in the program from which the print is made, open the “File” menu, then select the item. “Print”.
  • Go to the section “Printing Options” or “Properties”.
  • Here we click on the “Functions” tab, the “Size” menu will drop out, where you need to select “Advanced”.
  • Specify the size of the paper currently loaded in the printer’s tray. If its size matches the size of the printed image, then the “Borderless” checkbox will automatically become active and printing can be resumed.
  • If the “Borderless” checkbox is not active, and when you try to activate it, you are instructed to change the paper settings (size), you should do it using the above method.

“Drop” flashes along with “resume” light (letter of paper)

This can happen if one of the cartridges (depending on whether the left or right light is blinking) is depleted or non-genuine HP ink tanks are used. The solution is simple. you need to replace or refill the cartridge. If the ink tank is produced by a third-party manufacturer, the printer simply does not recognize it, which will cause the “drop” lights to blink.

After installing new cartridges, be sure to follow the alignment procedure as described above.

“Drop” flashes together with the power indicator

Usually, such an indication is observed when the carriage malfunctions, which, in turn, occurs due to a hardware malfunction of the cartridges, their incorrect installation, or a short circuit between the contacts. If the procedures for reinstalling the ink tank do NOT work, they may be out of order and need to be replaced.

You should also inspect the contact area of ​​the cartridge and carriage. They could be hit by a small metal object causing a short circuit. It can also happen if there is moisture on the contact surface.

What does a yellow triangle with an exclamation mark inside mean on a surveillance video monitor.

Read the instructions for the recorder, it says there. There is no standard for icons, every software manufacturer jerks off as he wants.

This means ATTENTION! Something went wrong. Most likely the memory is full

Cameras “fall off”, the signal disappears. http://www.Devline.ru/forum/?Showtopic=1685 As in a computer. something is connected with the network.

Just see the instructions from your registrar. But most likely this is a problem with the signal from the cameras (somewhere the contacts have oxidized and “drizzle” now)

The device is not working properly

Yellow icons in the form of a triangle. only in connection with the Internet. Do not forget that today is the 1st day of the 1st month of the New Year. Maybe your provider has simply “forgotten” about their responsibilities, or there is not enough money on your account to connect for the next month.

Caution attention area increased driver attention

Which means a yellow triangle with an exclamation mark opposite the video card, driver.

Driver problems

There is something wrong with the driver. Restart it or update

Click on it. properties. copy the ID and paste it into devid.Info and you will have a driver.

This means that the computer cannot recognize the video card, or it is not working properly. If you have a driver disk for a video card, use it (ie. Institutional driver for video from this disk and start the computer). If such a Badge is opposite the driver itself, then it is not suitable for the equipment (for example, for the same video).

Guys, don’t get fooled by such a lie that vidyuha dies. You just need to install the driver for the video card first, and then update BOIS AND ALL.

Discussed here already, use driverplus.Ru

A yellow triangle with an exclamation mark appears on the taskbar, I read what it means a system error.

Yellow triangle with an exclamation mark. you may have a conflict on the network. Usually, if you move the cursor to this triangle in the tray, it will show the problem.

Maybe a shield with a sign, then these are automatic updates

Describe more precisely what the error is, I will try to help.

This is a lack of RAM. How much RAM do you have? This message appears when the computer is loaded and there is not enough swap of the operative. Either adding an operative will help you, or just open fewer processes at the same time))))

Enlarge the paging file, pre-clear it, specify it without a paging file and reboot then point it to the same value for both the original and the maximum Based on this scheme, well, if this error is in lack of memory

For a start, it would be nice to clarify the type of error, and then ask for advice.

You need to increase the virtual memory. My computer properties Advanced action Advanced Change Drive C write minimum 2000 maximum 3000 Set OK apply restart the computer and everything will be fine !

But in my opinion it says that Windows is being updated, at least for me this also happens

At work on my computer, it shows a yellow exclamation mark and says that there is no access to the network! At first I thought that it might be due to NOT payment, I opened the properties and rebooted, I also added another local network, but I did NOT see the result! Please help and tell me where to go!

What does exclamation mark mean?

Exclamation, surprise, joy. these are associations that are subconsciously caused by an exclamation mark. It is one of the venerable punctuation marks. Information about its use in grammar dates back to the sixteenth century. At that time, the exclamation mark was called amazing. According to one version, it comes from the Latin word “Io”, meaning joy. To simplify writing in the future, the letter I was placed above o, which resulted in the sign “!”.

The first rules for its application in writing were determined by M.V. Lomonosov in the eighteenth century.

Surprisingly, until the 70s of the last century, the exclamation mark was absent on conventional typewriters. In order to display it on paper, first they printed a period and only after that. a superscript comma (the so-called apostrophe), having previously returned to the place of the dot.

Main application in Russian

There are certain spelling rules that apply to this mark:

  • Exclamation mark ends exclamation points.
  • Used at the end of declarative, motivating, exclamatory interrogative sentences. Helps to show emotional formulas of speech etiquette, denoting greetings, goodbyes, conversions, gratitude, etc.
  • It is put at the end of “rhetorical” sentences containing a question. These sentences may imply a more emotional storytelling.
  • Can be used in sentences instead of commas for emotional appeal.
  • After the words “yes” and “NO”, an exclamation mark is used to express strong feelings.
  • It is used in situations where a sentence is both an exclamation point and an interrogative one, which is indicated in the letter by two signs. ?! (But not the other way around).

Other uses for the exclamation mark

This punctuation mark is widely used in mathematics and computer science. For example, it is used as part of symbols to denote factorials or subfactorials, and in the programming language the sign “!” means some logical negation operations. Especially often we see it as attracting attention on the monitor, working at the computer.

In 2009, a new sign for motorists was introduced. a yellow exclamation mark. Drivers with less than 2 years of service are required to install a badge with a black exclamation mark on a yellow background on their car. This is done to warn other road users. At the same time, the rights to ride for a novice driver are NOT limited.

This amazing symbol plays an important role Attracting attention when an exclamation mark lights up on the dashboard in a car, signaling a malfunction in the car.

This could be due to the following:

In any case, when an exclamation mark is applied, we always feel an increase in attention. After all, this symbol really means the importance of what is happening in this situation.