Phone Can’t Find Printer On Wi-Fi

Instructions on how to connect the printer to the phone

In modern times of advanced technology, there are often cases when you need to send, print or download something literally on the go. Smartphones and tablets on mobile operating systems began to act as a kind of intermediaries between man and computer. Quite often we download something to our device and then transfer the files to where we need to. But if sending something by phone is easy enough, just a couple of keystrokes, then is it possible to print something from your android or iPhone? Of course yes!

Printer and phone

To do this, you just need to connect the printer to your phone via Wi-Fi or USB. Can this be done, and if so, how? Let’s sort it out in order.

Connect the printer

The very first, tricky and not always working method of connection is via USB. It does not work with all phones, tablets and printers. However, there is a way to connect your phone to a printer via USB. To start with, your phone or tablet must have a USB Host output. In other words, it is the ability to connect various kinds of flash drives, computers, and so on to a phone or tablet.

If your device is capable of reading information from them, then everything is fine. In addition, you will need special software for the device. In other words, drivers. Finding drivers for Android phones is rather problematic. There are very few of them and most often the device does not read information from the phone. And the smartphone, in turn, does not see the printer. In this regard, devices from HP are very good.

HP has developed its own software for the Android device. The application is called ePrint, after the installation of which, printers from HP will be visible to your tablet or smartphone. Iphone also supports this software. Exactly the same program with the same name is available in the App Store.

But do not despair, you can connect via USB not only printers from HP. By installing the “USB connection Kit” application, you can connect your phone to a Canon printer. Of course, some Canon models may NOT be visible to your device, but don’t worry! Try it, and if nothing helped at all, then there is another way to solve this problem.

Solution to the problem

And this problem is solved quite simply. The only negative point is that the printer must be Wi-Fi capable. It would seem that everything is simple, turn on Wi-Fi on your device, then on the printer and Print as much as you like. But no, not all printers can see Android or iPhone and NOT all devices can connect to the printer. To solve these problems, as well as for the most comfortable use, a number of programs have been developed. Accordingly, you can connect your phone to a printer via Wi-Fi.

Connecting a phone to a printer via Wi-Fi

There is a program called “Wireless Printer / Cloud Print”. A very functional program that allows you to connect to most printers. The program works very well with printers from HP, Canon and Kyocera. The following applications are a list of the capabilities of the “Virtual Printer” program:

  • Possible printout from all Android devices that support the program on all printers that are connected to this service;
  • Printing of any documents and photo images in various resolutions, Converting files, etc.

All the simple complexity of connecting the program consists in adding the necessary printers. But not all printers have access to the Internet, but many support printing from cloud storage. In this case, you will need to link the printer to your Cloud Print account. The order of steps for connection is determined by the printer manufacturer. For example, a Canon printer can be easily connected via Google Chrome.

Software use

Using the “Virtual Printer” software is very simple, first you need to select the Required document (file), then select the printer on which you want to start printing. If necessary, you can set print parameters, and then send the file to the printer. In order for everything to work out, it is necessary that the PC or laptop and the printer are turned on. It is also necessary that the PC has a regular Google Chrome (it is not necessary to launch it during the printing process). Documents can be sent from any cloud storage.

The following program is called “PrinterShare”. It positions itself as a program that can work with any file extension. With it, you can also connect a printer by phone. Importantly, the printer can be connected via Bluetooth, Wi-Fi, USB, or via a local network via the Internet. The connection method does not play a special role, the main thing is that the printer is registered in the PrintShare cloud storage, and the necessary software is installed on the computer. And of course, when connecting the phone to a printer via USB, an OTG adapter will be needed. It is also necessary that the device supports USB Host.

The advantages of this software are that it is possible to print absolutely everything from your device. It is possible to print letters from e-mail, print calls and SMS messages. You can also print a calendar or contact list, which is very convenient in certain situations. over, when printing, it is possible to choose an easy-to-read font, adjust borders, headers and footers, sheet size.

Another easy-to-use program is called “Printbot”. The application allows you to connect to a printer, which is on the same local network as the device.

Of all the applications discussed above, the easiest to understand and use is “Wireless Printer“. Simple interface, easy installation, wide range of possibilities. All you need is a personal computer and Google Chrome installed on it.

However, the most successful application in terms of functionality is the “PrinterShare”.

Now, to the question: “is it possible to connect a phone to a printer”, you can answer. definitely yes!

Why Android phone can’t see Wi-Fi network

Why can’t my Android phone see the Wi-Fi network from my laptop? This question often worries users. It is worth noting that by distributing Wi-Fi from a laptop, the same network is obtained as with a regular router. Therefore, the principle of its operation and settings is practically NOT different.

The only difference is that the router has more extensive and flexible parameters. In addition, you should know that you can organize an access point on a laptop in different ways. One of them is the organization of the “Computer-to-computer” connection. In this case, your phone or tablet simply will not detect the network, since it is designed exclusively for computers.

Why Android does not see Wi-Fi network

The fact is that the Android operating system is made in such a way that all settings have already been entered and users simply have nothing to customize. Everything is extremely simple. Therefore, we will look for the cause of the error directly in the access point itself (in a router or laptop). So, let’s analyze both options in more detail.

Why Android can NOT see Wi-Fi network

Configuring the router

Very often, Android does not see a Wi-Fi network due to incorrect router settings. So let’s go into the router menu and make any necessary corrections. To do this, connect to an access point on a laptop or desktop PC. Open your favorite browser and write the IP of the router in the address bar. How to find it out. As a rule, the device itself has a sticker with all the data. But if not, the information you need can be found in the user manual. If there are instructions, then we do the following.

Press two keys WindowsR simultaneously. In the window that appears, write CMD and click “OK”. Thus, we launched the team term. Here you can see detailed information about the network to which the computer is connected. To do this, write ipconfig and press Enter. After that, you will see the connection details. Here you need to find the term “Default gateway”. It is this address that we need to register in the browser. As a rule, most routers have such an IP. 192.168.0.1 (but there are also such ones, 192.168.1.1) It all depends on the model.

How to easily find out the IP address of a Wi-Fi router

So, after we have registered the desired address, press “Enter”. After that, we need to enter a username and password. Here we write admin, admin, respectively. If you changed these values, then enter your data.

That’s it, we got into the parameters of the router. The interface may differ depending on the model and brand of the device. We will analyze the Further steps using the example of the D-LinkDir-615 router. But it is worth noting that all access points work according to the same principle, therefore, their configuration is practically NOT different. The difference lies only in the design of the menu and the title of some sections.

First of all, you should click on the “Advanced settings” button at the bottom of the screen. After that additional sections will appear. We are interested in the item called “Wi-Fi”. Here we go into the main settings.

First, we check if the wireless connection is enabled. There should be a check mark in the “Enable wireless connection” line. If it is not there, then we set, saving the parameters and check if Android finds our network.

If the problem is not resolved, then move on. Now you should check the channel. Try changing it. It is recommended to set this to “Auto” (automatic detection). A little below you need to select the network mode. It is recommended to select 802.11 BGNmixed from the list. This is a mixed mode in which devices that support different Wi-Fi communication standards can connect to the network.

Now find the term “Hide access point”. This feature hides your network. Because of this, the devices simply cannot find it. In this case, the connection to the router must be created manually. If there is a check mark here, then uncheck it, save the settings, restart the router and try to reconnect your smartphone or tablet to the network. This completes the router configuration.

Why Android won’t connect to Wi-Fi

Configuring a virtual hotspot on a laptop for network discovery

A very common question is why Android does not see a Wi-Fi wireless network created on a laptop.

This is done simply. First, we need to log into the network control center. To open the tool we need, find the network icon in the tray (in the lower right corner of the desktop). Click on it with the right mouse button and select the Required item in the menu that appears.

A menu will open in which you should enter the item “Change advanced sharing settings”. Here you just need to enable network discovery and enable file and printer sharing. In addition, at the very bottom of the menu, you must disable access to the network with password protection.

If you use the Virtual Router Plus application to create a wireless network on a laptop, then you can read in more detail in its configuration here.

That’s it, the setup is complete. Try connecting Android to the network again. It should also be remembered that if you use a laptop as an access point, then the range of such a network is lower than in a router. This is because laptops use less powerful antennas. You can read how to strengthen the Wi-Fi signal here.

For example, on a laptop, the signal level is about 20% (2 sticks), and a smartphone in the same place does not see available connections at all. The solution to this problem is simply to move closer to the router or install a Wi-Fi repeater. Alternatively, try moving the router closer to the center of the room and Position it higher so that the signal can cover a larger area.

What to do if Wi-Fi is connected but the Internet is not working on Android

I have extensive experience in setting up and connecting access control systems (ACS) and time attendance systems. And also I am engaged in setting up servers, computers, workplaces.
I work as an engineer at Technootkrytie.

  • Why does my phone not see a wireless bluetooth headset
  • Why Android won’t connect to Wi-Fi
  • Why the phone won’t connect to a Wi-Fi hotspot
  • Why Windows 8 does not see Wi-Fi networks
READ  Black line when printing on a laser printer

Hello, I have such a problem, I turn on my smartphone via Wi-Fi, it works for 2 minutes and then turns off the router and Wi-Fi does not work, but for the first time it works through the cable, then I have to restart the router thanks in advance.

My laptop does NOT distribute a waffle, what to do?

I have a d-link dar-1360u router, the TV sees wi-fi and the Android phone does not see!

Hello. If I understood you correctly, then when you connect your smartphone to the router via Wi-Fi, the router itself goes out in two minutes? over, if you connect your computer to the router via a cable, the Internet works, but Wi-Fi does not work. Yes? Here the solution may be equal. reflash the router. The Internet is full of firmware. Routers are easy and simple to flash. Check your router model and I will try to help you.

Tell me what is the problem? The smartphone sees not a single wai network, as well as Bluetooth. B does not distribute Wi-Fi. And also when you press the search for networks in the SIM card settings, it also cannot find the network. Thank you in advance.

Hello. Check if your phone can see other Wi-Fi networks. For example, Neighborhood networks, public hotspots, and so on. Most likely the problem is with the phone. If he does not see any networks at all, then bring them to repair, since, apparently, the Wi-Fi adapter or problems with the antenna burned out. Try to get closer to the signal source and check if the phone can see the network (closer. put the phone on the router). If he doesn’t see it, bring it in for repair. If the phone detects other networks, then the problem is in the router. Maybe it works on second protocols. Read detailed information about the technical characteristics of the router and phone.

A laptop and two android phones are connected to the network via wi fi. Why does the laptop not see phones and phones do NOT see each other? In this case, the laptop is seen by phones.

Created a virtual point on a Windows 7 laptop. Smart does not see the network. You have described what to do with the router if Smart does not see the network. But what to do with the laptop? “Advanced sharing options” changed exactly as indicated above.

Hello. The thing is that the computer is constantly in detection mode. That is, it is constantly visible. But, in phones, in order to improve security, this mode is always disabled. That is, in order for the computer to find the phone (or the phones can see each other), you need to enter the Bluetooth settings and activate the discovery mode. At the same time, remember that the mode is activated for a certain time, as a rule, for 2 minutes (plus or minus, depending on individual settings). This means that after the specified time has elapsed, the discovery mode will turn off and the phones will again become invisible to other Bluetooth devices. Here’s a good article on how to use Bluetooth on Android. http://v-androide.com/instruktsii/bluetooth/kak-polzovatsya-bluetooth.html#! There is also a section called “Discovery Resolution”. Read the entire article carefully, it will be useful for you to know this.

Hello. Here the moment is important, how exactly you distributed the network. For example, the “computer-to-computer” connection (if you know what I’m talking about) does not see Android devices. That is, “computer-to-computer” is a network that is designed for computers only. This is evident from the name itself. over, such a network has its own limitations and uses unique protocols that are available only for Windows. For you, in order for the tablet to see your network, you need to configure the distribution on the command line or using the Virtual Router Plus program. Here is an excellent article with detailed instructions on how to distribute a network from a laptop. http://bezprovodoff.com/wi-fi/nastrojka-wi-fi/razdacha-wi-fi.html. There are three methods described here, but as I said, only two of them will work for you. the command line and the Virtual Router Plus program. And about the settings. This article also describes all the settings for sharing and accessing the Internet. Read carefully and you will succeed.

Good evening. I need help, tell me pliz. After cleaning the phone, he does not see the wi-fi network, at which the laptop sees and catches, and on the phone everything is gray. I have already done everything and overloaded and turned off everything. But unfortunately nothing helps. What could it be.

And I have three cases: the bodies are connected to Wi-Fi but there is no Internet, the second network sees but does not connect, the third is connected, but as mentioned above, after a while, the ATP is disconnected in advance

Good afternoon! There is an Android tablet Esperanza, a TPLink A750 router.
Next problem:
connected the tablet to the network. Everything works without problems, but
1- when the tablet falls asleep for about a minute, it is visible in the statistics of devices connected to the router’s network
2 if I turn on the tablet while it is visible in the connected ones, everything is ok
3 if I turn on the tablet when it falls off the connected ones, then on the tablet itself I see the connection icon to my network (there is a display of the Wi-Fi icon), but there is no Internet until you turn off and then turn on the network connection.
Approx. In additional “Proxy server” in the “NO” position
“IP Settings” in DHCP position
thanks in advance, yes version 4.4.2 version 4.4v2.0 processor type DualCore-A23

Hello there is such a problem. The apartment has a router that distributes Wi-Fi to all rooms. In my husband’s tablet, Wi-Fi works fine, but on my phone. Android Lenovo does NOT function at all, and before that everything worked well.
What could be the reason? Tell me please!

Hello! Such a problem. We connected a new internet and bought a new router. The Internet users themselves insisted on it. The tablet sees and receives the signal well, but the phone does not see it at all. At the same time, the phone perfectly accepts neighbors’ Internet and finds new signals on the street. What is the problem? On your phone or on your router? As in Julia in the previous comment. Lenovo Android. I used to work without problems and now with other routers without problems. Maybe they don’t fit together. You are the last hope

Hello. The phone is not for that, for no reason, it just does not see any wi-fi network. What to do? Hyawei honor 4x

Hello me Wi-Fi always works on the phone and then I come and bam! Does not see it. Wi-Fi is visible from the second phones in the house. Does it catch me in public places? WHY.

Please tell me what the problem is, how to solve it. Updated android on the tablet. After which Wi-Fi stopped finding networks. As a result, he does not see either the router’s network or the network of the distributing mobile. What can you tell?

Hello. The phone does not see home wi fi, it sees everything else. What could be the problem?

Hello. Have you tried to do a general reset to the factory settings? You will also need to clarify exactly how you cleaned your phone. Did you analyze it, or do you mean software cleaning from cache and second software garbage? If the phone was disassembled, then it is possible that the Wi-Fi antenna was turned off or the antenna wire was broken. Here it is necessary to disassemble and check. Try to bring your phone close to the router and check if it sees the network (there should be a weak signal). If he sees it, it will indicate that the antenna wires are disconnected or broken. If the problem is software, then you need to reset to factory settings.

Hello. You will have to clarify your question. Describe in detail who sees but does not connect, who connects but does not have access to the Internet. What phone and so on. Or do you have three problems with one phone at once? I did not understand your question.

Hello. Apparently the tablet simply has an auto-reconnect function (the so-called Wi-Fi roaming). You can improve the connection quality by manual adjustments. That is, on the tablet in the Wi-Fi settings, change your network. In the “DHCP” line, make up the “Static IP” value and below, set the network parameters manually. Save the settings and that’s it. I do not know of the second solutions. Sorry. The fact is that tablets have special Wi-Fi settings. That is, you can set the network parameters manually, but that’s all. All services are automatically configured and running and if they crash then you will NOT do anything. There is an option to open the developer menu (engineering menu) and in it try to find services that regulate the work of Wi-Fi and configure them.

Hello! The phone does not catch Wi-Fi. Periodically starts to catch. Five minutes. Then again he does not catch two days. Did NOT flash.

Hello. I have a Samsung galaxy note phone. When I turn on wi-fi, it does not see any networks. What to do? (The tablet detects about 6 networks)

I did it several times as described in the article. I distribute Wi-Fi from a laptop, access is open everywhere. However, Android still DOES NOT find it. What to do?

Hello. I have a tablet and a phone is built into it, with wi-fi, everything was fine. Until the tablet was completely formatted, and now I can not connect to wi-fi. That is, he sees the network but does not connect. Although I type the password correctly. And when they turn on the wi-fi icon I don’t see!
What could it be?

Hello. It may be that the phone is just old (or a budget model) and it simply does not want to be “friendly” with the router. This can be explained by the Wi-Fi standard. You can enter the router settings, go to the Wi-Fi settings and see which Wi-Fi mode is set. It is best to set it to “Wi-Fi 802.11b \ g \ n mixed”. When buying a router internally, you need to look at what Wi-Fi modes it supports. It is possible that your router only works in 802.11n mode, and the phone simply does not support this mode. The fact is that in the “N” standard the frequency of the radio signal itself differs from the “B” and “G” versions. N operates at 5 GHz, while versions “b” and “g” operate at 2.4 GHz. This is the difference and the root of all problems. If the router supports all frequencies, then you can set the mixed mode in the settings. This will slow down the router a little (not significantly), but any devices will be able to connect to it. If the router only supports operation in “n” mode (802.11n), then you will not do anything, you just chose the wrong router. Sometimes, it also happens that the router supports all frequencies and modes, but still DOES NOT connect with the phone. I don’t know what the reason is, I had such a problem with the D-Link Dir 320 router, to which the old phone (Samsung GIO) simply did not want to connect. The problem was solved only with the purchase of a new router from TP-Link.

Hello. If the phone was previously connected to the network, then most likely the problem is in the router. Nobody climbed into the parameters? You can enter the router settings, go to the Wi-Fi settings and see which Wi-Fi mode is set. It is best to set it to “Wi-Fi 802.11b \ g \ n mixed”. It is possible that the router firmware is malfunctioning. In this case, the router can be reflashed. The firmware can be found on the official website of the router manufacturer. Routers are easy to flash. Just download the firmware (preferably on the official website of the router manufacturer), go to the router parameters \ system tools \ software update. Press “Browse”, specify the firmware file and confirm the action. That’s all. Only you should understand that after flashing the router will have to be configured again. Also try to simply restart the phone (sometimes the accumulated cache simply does not allow you to connect to the network).

Hello. There are no Wi-Fi options in the phone. So try restarting your device. Also clarify, does the adapter turn on? That is, you turn on Wi-Fi (the button turns green or blue), but the networks are not detected? Or wi-fi won’t turn on at all? Try just restarting your phone. Sometimes the accumulated network cache simply does not allow the adapter to work normally. If it does not help, then do a factory reset. If this does not help, then you can try to reflash the phone. If you yourself are afraid to flash or the firmware did not help, then bring it for repair.

Hello. I did not understand the question. The phone can’t see only the home Wi-Fi network? Or does not see any Wi-Fi network at all? If he does not see it at all, then it is possible that the Wi-Fi adapter on the phone has burned out. If you do not see only the home network, then you need to look at the parameters of the router. Try reflashing your router. Routers are easy to flash. Just download the firmware (preferably on the official website of the router manufacturer), go to the router parameters \ system tools \ software update. Press “Browse”, specify the firmware file and confirm the action. That’s all. Only you should understand that after flashing the router will have to be configured again. Also try simply restarting your phone (sometimes the accumulated cache simply prevents you from connecting to the network). If it does not help, then do a general reset on the phone itself (reset to factory settings). If the reset does not help, then there is a high probability that the Wi-Fi adapter has burned out. You can try to flash it. If the firmware does not help, or if you are afraid to flash it yourself, then bring your phone to repair.

READ  Home Photo Printer

Hello. Try doing a factory reset on your tablet. If this does not help, then you will have to reflash the tablet. Most likely, an error occurred during the software update or the update came out with a bug. In any case, the solution is one. I asked for it. You will have to flash it manually using a PC, and it is best to use the official service firmware. If you yourself cannot flash, then it is better to take it for repair.

Hello. It may be that the phone is just old (or a budget model) and it simply does not want to be “friendly” with the router. This can be explained by the Wi-Fi standard. You can enter the router settings, go to the Wi-Fi settings and see which Wi-Fi mode is set. It is best to set it to “Wi-Fi 802.11b \ g \ n mixed”. When buying a router, you initially need to look at what Wi-Fi modes it supports. It is possible that your router only works in 802.11n mode, and the phone simply does not support this mode. The fact is that in the “N” standard the frequency of the radio signal itself differs from the “B” and “G” versions. N operates at 5 GHz, while versions “b” and “g” operate at 2.4 GHz. This is the difference and the root of all problems. If the router supports all frequencies, then you can set the mixed mode in the settings. This will slow down the router a little (not significantly), but any devices will be able to connect to it. If the router only supports operation in “n” mode (802.11n), then you will not do anything, you just chose the wrong router. Sometimes, it also happens that the router supports all frequencies and modes, but still DOES NOT connect with the phone. I don’t know what the reason is, I had such a problem with the D-Link Dir 320 router, to which the old phone (Samsung GIO) simply did not want to connect. The problem was solved only with the purchase of a new router from TP-Link.

Hello. Check your phone model and which router you are using?

Hello. It could be a software failure or a hardware error. The software glitch can be resolved by resetting the phone to factory settings. If the reset does not help, then you will have to flash it. If you cannot flash it yourself, then bring it in for repair. A hardware error is a failure of the adapter itself. That is, if the reset and firmware do not help, then, most likely, the Wi-Fi adapter itself burned out (or was with a shortage initially). In this case, the non-working adapter must be replaced with a working one. To do this, you need to disassemble the device. Again, if you cannot disassemble yourself, then it is better to immediately take it for repair. Second solutions available.

Hello. How did you share Wi-Fi from your laptop? The fact is that there are different ways and not all of them are suitable for Android devices. For example, the “Computer-to-computer” connection of Android devices (as well as any mobile devices on any mobile operating systems. iPhones, iPeds, Android tablets and smartphones and so on) simply do not see such a network, because it has its own protocols and designed for computers only. Therefore, it is best to distribute the network using the command line or using the Virtual Router Plus program. In fact, these two methods are one, since the program sets up the same command time limit, only in automatic mode. Here is an article that describes all three ways. http://bezprovodoff.com/wi-fi/nastrojka-wi-fi/razdacha-wi-fi.html.

Hello.
Such things: yesterday the phone found the necessary network and connected to the Internet, but today’s attempts to connect are unsuccessful. He does not even find the network to which he always connected, although he sees others.
The router is open, I calmly connect to it using a second phone. I rebooted, dropped the settings. nothing helps.

Sometimes you need to try to switch broadcast channels. The router can broadcast on channels from the first to 13 and the phone only catches from the first to the ninth, and if the router is configured for example on channel 11, then the smartphone will NOT see its network

phone, find, printer, wi-fi

Hello. Do a factory reset. http://kingdia.com/instruktsii/obsluzhivanie/172-kak-sdelat-hard-reset-na-planshete.html#comment-441. If resetting the parameters does not help, then you will have to reflash. http://kingdia.com/instruktsii/obsluzhivanie/47-kak-proshit-planshet-chto-takoe-proshivka.html. If you are afraid of the firmware yourself, or you are not sure of your capabilities, then it is better to immediately carry it to repair so as not to make it worse.

Hello. Rebooted your router or phone? Resetting the settings on the router or on the phone? Reboot both devices (and reboot the router in the following way: Unplug it from the outlet for 7-10 minutes, then turn it on). If it does not help, then reset the parameters on both devices. It is also advisable to update the software on the router (download a newer and more proven firmware). I don’t know any other options.

Hello, my Wi-Fi does not catch only a new phone, everything else works like a clock, there is a laptop in the house, two bodies and everything works, except for the new model of which Alcatel Pop 3! Tell me what is the reason?

In general, such a problem. I turn on the Internet. I connect. I’ll sit for about 20 minutes, suddenly the Internet is cut off. I want there is a network. Refreshing network search shows my network, but cannot connect. 30 minutes more Connected and disconnected again. And again. And again. And it turned on and off again. I don’t know. And so with all networks. What to do?

Hello! I have such a problem, the tablet was under repair, after the repair it does not see the Wi-Fi network, i.E. He sees other networks, but I don’t personally. The phone and laptop are connected well, and everything was fine for the repair!

Hello. Is this a problem on an Android phone? Please clarify your questions, as I could not guess. If we are talking about an Android device, then such gadgets have special settings, everything is automatically configured and connected there, and there are some problems, then the only option is to restart the device. If rebooting does not help, then do a factory reset. There are simply second solutions.

Hello, my phone suddenly stopped finding wi fi networks at all. And he only finds it when I get sooo close.

HTC Desire 626G dual SIM

Hello. Specify what exactly you repaired? Maybe your Wi-Fi adapter was replaced and it is simply not compatible with your router now (the router and the phone work on different standards)? Try doing a factory reset. If this does not help, then bring it back to the repair where you already repaired it and say that after their repair the phone stopped seeing your network (that is, explain everything in the same way as you explained it to me). I don’t see any other options.

Hello. There are two options here. 1. a software problem. 2. hardware problem. Software failures are “treated” by resetting to factory settings. You can, of course, delve into the system files, try to find the error, but you can hardly find something (even experienced technicians cannot always find an error), what is the problem. Therefore, the fastest and easiest way to eliminate all troubles is to do a factory reset. If resetting to the factory parameters does not help, then you need to disassemble the phone and check the Wi-Fi adapter and the antenna connected to it. The antenna is connected via a round terminal (one wire). This should be checked. It is possible that the terminal has simply moved away or the contacts have oxidized (they just need to be cleaned). If you yourself are afraid to disassemble or cannot, then bring it for repair.

I have two phones and both have seen Wi-Fi by today because one of them stopped seeing it (the second one sees it). So 1 phone sees other Wi-Fi networks but does not see my home one. What to do?

Hello, my problem is this: the computer and laptop see Wi-Fi, but all Android devices do not.

Hello. How exactly do I distribute Wi-Fi, from a router?

Please tell me, I have such a situation. 2 phones do NOT see Wi-Fi from a computer.
I don’t even know what to do

I have the same problem. But they have not seen 2 phones for 2 weeks already.

Hello. Try restarting your phone first. If it does not help, then restart the router itself. If this does not help, then you will have to do a factory reset on the phone. The fact is that there are second settings, like on a computer, in an Android phone. That is, you will NOT be able to configure anything else, you will NOT be able to reinstall the drivers or reset the network cache, and so on. Here it remains to do a reset to the factory settings, and by the same token it turns out that you will reset the network cache and all network parameters, which in turn will fix all the errors that prevent the phone from finding your home network.

Hello, yesterday in the whole house and on the street the electricity was turned off for a couple of minutes, after which two Android phones stopped seeing the Wi-Fi network and will generally connect to it. One phone has been working for 2 years already and I have always seen Wi-Fi at home, but here. The second phone is new, at first I thought that the problem was only in the new one, but no. The computer has internet, Wi-Fi works. Help me please. (Previously, the electricity was already turned off and there were no such problems).

Hello. I understand you have created a virtual Wi-Fi hotspot on your laptop? If so, please clarify how you set up the virtual network? That is, if you create a “Computer-to-computer” connection, then such a network is suitable only for computers. Mobile devices won’t even see this network. Therefore, in order to distribute Wi-Fi to phones and tablets, you need to configure distribution in the command line or using the Virtual Router Plus program. Both of these options are described here. http://bezprovodoff.com/wi-fi/nastrojka-wi-fi/razdacha-wi-fi.html.

Hello, the phone does not see only the home file network, although at first it changed the purity of the router and helped, and now again, but it no longer helps

Hello. Such a problem. I bought a new phone on the sixth Android, he sees my Wi-Fi from MTS, the signal is excellent, it connects, but the speed of the comments. Even YouTube videos DO NOT play. The rest of the smartphones at home work fine on Wi-Fi.

Hello. A router, like a computer, does not like such abrupt outages. It is quite possible that due to the shutdown of the light, some kind of glitch in the software just went. Just restart your router. Better yet, unplug it for 10 minutes and then plug it back in. Restart both phones as well. If it does not help, then on the phones go to the settings \ Wi-Fi. Including the adapter, find your network, press it and hold it with your finger until an additional menu appears. Choose “Forget network” or “Remove network”. After that, you try to reconnect to the network. The system will ask you to enter the password again. That’s all. After such simple actions, everything should work.

I have a Prestigio tablet model PMP5101C3G_QUAD version Android 4.2.2. My tablet doesn’t catch Wi-Fi at all. As soon as I try to turn it on, “Turning on Wi-Fi.” appears, but it doesn’t turn on anyway. And then it turns itself off and nothing, neither Wi-Fi nor this inscription. And I have already tried to turn it on a thousand times, but everything is the same, there is nothing further “Turn on Wi-Fi.”. Please help, because he used to catch this Wi-Fi, but now I don’t even know what happened

Hello! My smartphone constantly reboots when connected to my home Wi-Fi network. It connects to all other networks without problems. What to do with a TP-Link router?

After turning off the light, the phone does not see Wi-Fi

READ  Stripes appear on the printer

And I have such a problem. The browser cannot find my gateway

Hello. Do you mean you changed channels or the Wi-Fi mode itself in the router parameters? Try to put the channel from first to fifth (one of the first). If it does not help, then it is quite possible that the phone needs to be cleaned of the network cache (using the Clean Master application), delete all old connections (in the Wi-Fi settings on the phone, including Wi-Fi and delete all networks to which the phone was previously connected ). After that, restart your phone and try to connect to your home network. If it doesn’t help, then do a factory reset on your phone.

Hello. There could be many reasons for this. You have to figure it out personally. I cannot describe and foresee everything. Try doing a factory reset on your phone. If it does not help, then in the access point settings, try changing the broadcast channel, turning off password protection and selecting the Wi-Fi 802.11b \ g \ n mixed mode. If it does not help, then you already need to personally understand.

Wi-Fi does not turn on IMEI disappeared. Everything that can be tried resetting to the factory firmware did not solve the problem.

Hello. IMEI itself could not be lost. Apparently you tried to reflash your device? Or did they do something to him? There is nothing you can do about it. There are many options as to why this could happen, but you cannot solve them at home. The problem here is most likely a hardware problem. That is, either the motherboard is out of order, or the voice modem itself (wireless adapter) has burned out. In any case, it is necessary to disassemble the device, call and check everything (do a full diagnosis). So you have a choice. bring it to repair. Or just buy a new phone. Remotely, I definitely can’t help you. So sorry.

In addition to what was written, the daughter dropped it (

Hello. I have a phone for 2 years already. Some time ago I noticed that now it detects only home wi-fi. And it works. Does NOT react to the search in any way. And turned it off. And rebooted, did not help.

Hello. Try to remove all old connections. That is, go to the settings. Go to the “Wi-Fi” section. Including the adapter, and when the list of available networks appears, below will be the networks to which the device was previously connected. We delete everything that will be there (except for our home network). Then you reboot the device. If it does not help, then you can try to reset to factory settings. The fact is that there are no special settings for the Wi-Fi adapter in Android devices. Therefore, you will be able to configure little manually, much less reinstall drivers or fix any problems. All of this is eliminated by a factory reset. If this does not help, then bring it to the repair, since, most likely, the problem is hardware. That is, you will have to replace the Wi-Fi adapter.

After connecting to the router, after 30 minutes, the phone stops seeing the network. After reboot, the same story is reconnected. Wi-Fi does not go out on the router. Repeats on all devices

Hello. Most likely the problem is with the router. To be more precise, it simply does not hold the network. This error is resolved by updating the router software. You can find and download software for your router on the official website of the router manufacturer. There will also be instructions on how to reflash it. In general, everything is pretty simple. You need to go into the parameters of the router. http://bezprovodoff.com/wi-fi/nastrojka-wi-fi/nastrojki-routera.html. Next, in the router settings, go to the system settings section. Find “Software Update” here. That’s the whole secret. Then press “Browse” and specify the path to the firmware (which was previously downloaded from the official site). Then press “Refresh” and wait for the completion of the procedure. As a rule, after updating the software, the router will need to be reconfigured. But it happens that the settings are saved. You don’t have to search for the newest and latest firmware. As practice shows, old tested firmwares work more stable. But, outdated software can also negatively affect the operation of the device. Therefore, you should try different firmware options. Download the latest, penultimate and even earlier version of the firmware, and try to install, here’s the freshest, in the oldest and see which one works more stable.

Hello. Try doing a factory reset. If this does not help, then take it to the service center, since, most likely, this is a hardware error (that is, you just need to replace the Wi-Fi adapter).

Hello. Try to remove the home network from the phone memory. That is, opening the “Settings”, go to the “Wi-Fi” section, including the adapter, and when the list of networks appears, find your home network, press it with your finger and hold it until an additional menu appears in which you need to select “Forget the network” (or “Delete the network). After that, restart the phone and try to reconnect (you will have to re-enter the password to the network). If it does not help, then try to reset to the factory settings on the phone.

Hello. Do you mean that you cannot enter the parameters of the router? If you have NOT changed the IP addresses of the router, then on the router itself there is a sticker on which the gateway is indicated, which was assigned during manufacture. Sometimes, a firewall blocks browsers and some IP address. Therefore, try disabling firewall. Coma, in the IPv4 properties of that adapter through which you connect to the router, the value “Obtain an IP address automatically” should be set. Open the command prompt and add the ipconfig command. Below will be information about network parameters. Find the term “Default gateway”. this will be the address of your router.

Hello! Please help me solve my problem. The phone does not see exactly my modem, all Neighborhoods, infection, catches. Recently we moved, everything was normal in the last apartment, although sometimes I also didn’t catch it. Now the trouble is aaa. I tried through Add a network, but writes that is out of the zone. It will NOT work to distribute from a laptop, there are the necessary drivers, and download them is from 80,000 kb, and my internet speed is 14 kb sec. I also tried to connect USBs to a modem, again unsuccessfully. Phone HTC Rhyme S510B

My phone won’t connect to Wi-Fi

How to connect your phone to a public Wi-Fi network

In order for the phone at home to be able to connect to a wireless network, a router is needed. It can be a laptop or a computer with a WI-FI adapter. The main advice: do not be lazy to put a high-quality password on the network and connect the WPA2 security type. You should NOT strive to be a good neighbor, it is fraught with many problems from running out of traffic to problems with the law if a dishonest person connects to your network.

It is enough to set up the connection once, in the future the phone will automatically find the home network.

Android phone won’t connect to Wi-Fi: reasons and solutions
. 1. Wi-Fi is connected, but writes “no Internet access”

There are several reasons. First: the router is really NOT connected to the network at the moment or is working with errors. It needs to be rebooted. You can ask the staff about this when it comes to a restaurant or cafe. Or, do it yourself: we recommend disconnecting the power cord for 2-3 minutes, while checking whether the Internet and ethernet cables fit tightly into their cells.

Second: you are too far from the router, and it simply “misses” your device. Try to move. If this happens at home, move the router somewhere else. There may be some obstruction in the signal transmission.

Third, you haven’t finished connecting to the network. In many public networks, a mandatory requirement is user authentication on a special page that comes out after you click on the “connect” button. You may have prevented the page from opening. In this case, find the network in the list of available ones, click on it and select “Delete”. Reconnect and wait until the start page opens, where you will need to enter your phone number and password, which will come to it. If the page does not open automatically, go to your default browser and try to open any page. A window for authorization should appear.

Fourth: The date and time are set incorrectly in the phone. Check settings, enter correct data.

Fifth: There are problems with the IP address. Go to the list of networks and click on the one you need with a long press. Select “Change network”, then. “Advanced settings”. Here, in the IP Settings, set the value to “custom” and enter 192.168.1.X (where X1) (Make sure that this data suits you by looking at the label on your router. There will be sure to indicate its IP address. Address Phone will be the same numbers, except for the last one. Choose it according to your taste.)

Sixth: It is possible that you do not look at the free network, the Internet is distributed only to the IP / MAC address of devices specified by the administrator, i.E. You will NOT be able to connect without meeting the administrator.

Seventh: Perhaps the connection is being blocked by a “security program”: a firewall or antivirus. Try turning them off.

The phone is not connecting to Wi-Fi and the computer is connected

This suggests that the problem is not with the router or provider, but with the device itself. Although, the communication channel may be clogged and the router simply does not support a large number of devices. Try turning off the Internet on your computer or laptop and only connect from your phone.

The easiest way to solve the problem is to restart your phone. If that doesn’t work. Remove the network. To do this, go to the list of available WI-FI, by long-pressing the screen next to the name of your network, call the drop-down list and press the button “delete this network” (Option: “forget the network”). Together with it, all settings will be deleted: remembered IP-addresses, DNS and other parameters. Then find the network you need again and connect to it by entering the password.

If this does not help, find in the “settings” of your phone the item “Reset mobile Internet settings, WI-FI, Bluetooth”. It can be located in the “system” section or in the “additional functions”. Reset settings, restart your phone and try to connect again.

All in vain? Download an anti-virus application to your phone and test it. Malicious software can intentionally block access to the Internet or disrupt access due to certain settings.

Writes “saved”, but there is a connection, authentication error

If you are trying to connect to a public network in a restaurant or airport, for example, then the explanation can be very simple and offensive for you: the limit on connections to the router is simply exhausted, it cannot cope with the number of devices attacking it, eager to get into the network. This often happens in crowded places: at holidays, concerts. Any channel has a limit, and feeding the phones of thousands of voracious users can be difficult. Or an old router is installed and the phone simply does not support its settings. It is difficult to solve the problem in this case, it remains to wait or look for another network.

Also, a public network can be protected by a password and you DO NOT know it or enter it incorrectly. Try to talk to local employees, maybe they will reveal a secret to you, even if it is NOT a public network for all customers.

If we are talking about a home network, this error may indicate a freeze of the router. In this case, it can be reanimated by simply holding down the reset button or disconnecting it from the power for a couple of minutes.

If the error persists, go to the settings of the router through a computer (by entering the IP address of the device in the address bar of the browser), check that the encryption type is WPA-2, the DHCP server is enabled. And yes, make sure the password is entered correctly. On the router and on the phone. Even if it seems to you that you remember it by heart and there can be no problems with that. Sometimes, during the dialing process, an error may occur and you will not even know in which character: just change the password and again Try to log into the network.

Also check the date, time and region settings on your phone and router. Mismatching them can lead to devices blocking each other.

NNCXV.INFO 2021