Printer does not print after cartridge replacement

Nothing foreshadowed problems, but the unexpected happened

After purchasing an inkjet printer (and the article is devoted exclusively to the budget class of printers of this type), the user literally after a few printed photos may find himself in an extremely difficult situation. As a rule, the “Hero of the occasion” is a color cartridge that has exhausted its colorful resources. And all would be fine. took and bought! However, the price of a printing element is sometimes very sobering (often the user is in a state of euphoria, anticipating creative victories). There remains only one acceptable solution. to fill the dried up tank on your own.

Reason # 5: Hardware

Often times, the user incorrectly installs the cartridge, resulting in the contact plate not reaching the receiving pad of the printer or not positioning properly. It may well be that the device interface is somewhat dirty. Which, in general, is a common thing when refueling cartridges.

Reason # 1: Colorful

It is possible that the solution to the question of why the cartridge does not print after refilling is ink incompatibility. What should be done?

  • Learn more about the type of paint used in your modification.
  • All-purpose ink is not always a viable option. Better to spend a little money and purchase original paint.
  • Be sure to pay attention to the production time of the “artistic” substance.

Reason # 4: Air

Do not allow air to enter the inner part of the cartridge chamber, since such an “omission” can become the main reason for the same problem that occurs: “After refilling the cartridge, the printer does not print.” This is because air bubbles can prevent ink from passing through the print head nozzles. Therefore, after you have filled the slam-shut containers, close the filling holes with tape.

Step # 2: Incorrectly refilled cartridges

The printer does not print after refueling if the shut-off valve is exposed to cold temperatures. Due to the fact that the cartridge has been in the “wrong” position for some time, problems can also arise, since the outflow of ink from the print head under these conditions is simply inevitable. However, after you install the cartridge into the printer, after a few hours you can run a test print mode.

Why does not the printer print after replacing the cartridge

Despite all the attempts of manufacturers of printing devices to achieve the most optimal price / quality ratio in their final product, the problem when the printer does not print after refilling the cartridge remains very relevant today. What to do in such a situation? How to avoid the “whims” of household office equipment? Where can I find a one-stop printer maintenance manual? These and many other user difficulties in examples of practical solutions in front of your eyes.

Step # 3: Cleaning the nozzles with a special fluid

If the printer does not print after refilling, and the used cartridge has been inactive for some time, then this can only mean one thing. the ink has dried in the nozzles. In order to restore the operability of the printing element, a number of actions should be performed.

  • Place the cartridge in a shallow container with a medium-hard piece of cloth on the bottom.
  • If you do not have a special cleaning agent, then pour in some liquid for glass cleaning (soak the substrate).
  • The cartridge should be in this state of “soaking” for 10-12 hours, after which the print head must be gently wiped dry with a napkin.
  • Install the slam-shut valve in the printer and carry out several complete cleaning cycles.

Canon printer does not print after refilling a cartridge

In recent years, many Canon printers have used separate ink tanks. precisely, all printers except cheap or very old printers.

What can we do if we see that after refilling the cartridge, the Canon printer does not print? Few people probably thought about it, but any of the ink tanks contains only a specific color dye, and the general print head is inserted on the carriage.

What can we do if we see that after refilling the cartridge, the Canon printer does not print? Few people probably thought about it, but any of the ink tanks contains only a specific color dye, and the general print head is inserted on the carriage.
The most common case why a Canon printer does not print or does not print well after refilling the cartridge, perhaps, is that each ink tank has a specific, unique chip that is used as a counter for the number of pages that have been printed by us. These ink tanks are usually labeled CLI-521, CLI-8, PGI-520Bk, PGI-5Bk. In fact, this technology is the most economical. Thanks to this, you can control each color separately and independently of their volume, quantity, ink that is still left in each of the ink tanks, and also then, when one runs out, you can replace each of them separately.
In addition, with the new single print head, you can also control the drop size that is applied to the paper. from 2 to 1 picoliter! It also has a positive effect on print quality and color mixing.

READ  How To Connect A Printer Via Wi-Fi

printer, does, print, cartridge

In addition, the new single print head allows you to control the size of the drop applied to the paper. from 2 to 1 picoliter! It also has a positive effect on print quality and color mixing.
However, due to the fact that the ink tanks are chipped, after the ink runs out, the machine will stall, and very often after replacing the cartridge, the Canon printer does not print until the ink tank is replaced. Many users refill ink tanks, but after refilling such a cartridge still will not be detected by the printer as full, and still there is such a problem when the Canon printer does not print well after refilling the cartridge.
Depending on the model of the device, the chips of the cartridges (and “pampers of the devices, where the ink is drained during the cleaning of the print head) can be reset, reset to zero using the programmer. If, after refilling the cartridge, the printer does not print Canon mp250, you can also disable tracking the counter in the machine menu or device driver settings.

Canon printer does not work after refilling a cartridge

In order to understand how to start a Canon printer after refilling a cartridge, the printer was not blocked when the ink level in the cartridges reached zero values, according to the chip data, you need to disable the printer control system for the ink level in the cartridges.

Canon mg 2440 printer does not print after refueling

After the printer informs that some cartridge has run out of ink, press the paper feed button. It’s the middle button with a triangle and a blinking indicator. Keep it pressed for 10 seconds. After that, the printer will turn off the ink level control system for this ink tank. Now the printer will not block the job. If occasionally you get messages that the cartridges are low on ink. just ignore them.
Resetting the ink counter using the IPTool and MPTool utilities
IPTool 1.1.5. reset ink counters in Canon iPxxx printers.
The program is designed for servicing Canon iP-series printers in Normal mode. Features of the program:
Advanced information about the printer, ink cartridge levels, and maintenance boxes.
Printing Test Patterns for Checking GHG Nozzles.
Cleaning and deep cleaning of the PG printer, cleaning the pallet and cleaning the rollers.
Changing the drying delay value.
Change printer model.
Read and Reset Printer EEPROM.
Clears the black and color ink cartridge counters. Resetting the “main and” additional waste ink box full counters.
After turning on the printer and installing the “syringe cartridges, select the required brand CHANGE Model. If you have refilled a Canon cartridge and it does not print, Press RESET Black (reset black ink), RESET Color (reset color ink).

The level of the remaining ink Ink Level as a percentage will change its value to 100. Among other things, in the future, the problem of an overflow “sump or an excess of the level of waste ink will arise.

By means of the specified program, a similar problem is solved according to a similar scenario.

If desired, you can use the service functions for cleaning the “head MPTool 0.9.6.

The program is designed for service work with Canon MP-series printers in Factory mode. Features of the program:
Extended information about the level of ink in cartridges and waste ink containers (the readings are correct for the 40th series of cartridges, for the 30th and 50th they will be overestimated and underestimated, respectively).
Read, Write and Reset Printer EEPROM.
Resetting the black and color ink cartridge counters.
Resetting the “main and” additional waste ink box full counters.

READ  What is the difference between an inkjet mfp and a laser

HP and Canon inkjet printers, print head in printer

It is also relevant as for cartridges with a print head, the difference is that the head is in the printer and replacing the cartridge to continue working on the printer will not help, only replacing or repairing the print head of the printer. In most cases, such work can only be done at a service center.

HP and Canon inkjet printers, print head on cartridge

For HP (Hewlett Packard) and Canon inkjet printers with a print head on a cartridge, there are three possible options why the printer refuses to print.

A chip in the cartridge tells the printer that ink has run out. In this case, the printer:

  • new ink cartridges Canon PG-510 / PG-440 / PG-426. click “OK” in all dialog boxes in the printer menu, in the last window a message will appear asking you to press the paper feed button for a few seconds, do it. that’s it, the ink counter is disabled ;
  • other cartridges. in the printer settings on the computer or the “Resume / Stop” button on the device itself, it looks like a triangle in a circle and is most often red, you need to hold it down for 5-10 seconds and the error will be reset.

Xerox and Samsung Laser Printers

Most cartridges have a chip by which the machine keeps track of how much toner has been used up and whether the cartridge has run out, the same chip also blocks the operation of the printer when a certain value is reached. In order for you to be able to use the cartridge after it has run out, you need to flash the chip on the cartridge, or the printer itself. For flashed printers, there is an instruction for resetting the page counter.

The cartridge chip firmware differs from the printer firmware in that:
– the chip needs to be flashed or changed every time you refuel, which significantly increases the cost of refueling;
– the printer is flashed only once, then you yourself will be able to reset the cartridge counter and refill it when there is really not enough toner during printing, this can be seen from faint printing or the presence of white vertical stripes.

Epson inkjet printers

On older models of cartridges, the chip is absent or is reset by the programmer in our office when refueling. New models of cartridges where the chip is not flashed, we do not refuel.

Brother Laser Printers

The cartridge does not print, the machine says “insert a new cartridge” or the light on the printer blinks. These cartridges have toner counter reset flags that will reset each time you refuel. We would like to draw your attention to the fact that on the starter cartridges that come with the printer upon sale, this flag is not present and it must be set for a separate fee. If the check box has not cleared the printer counter, you need to check it again. Does not help? Perhaps the optocoupler for resetting in the printer is clogged, or the spring on the sensor in the printer has flown out, in this case it is necessary to bring the printer to our office for repair.

There is a procedure to reset the toner counter for some models of Brother MFPs and cartridges, but it only works when there is a check mark on the cartridge. instructions for resetting the counter.

Laser printers Panasonic KX-MB1500RU, KX-MB1520RU on cartridges KX-FAT400A7, KX-FAT410A7

These printer models have a page counter and when the maximum number is reached, they give a message that the cartridge has run out. The counter is reset by a fuse located on the cartridge, after resetting the counter, the fuse is burned out and for the next reset, a new fuse is needed, which is put in our office when refueling.
If the refilled cartridge does not print, then the following options are possible:
– The printer displays a message stating that the cartridge is empty. So there is no contact with the reset fuse. you need to diagnose in our office.
– The printer displays an error message “call service 17”. The fuse has not blown, open and close the printer cover, if that does not help, press the following sequence of buttons on the MFP:

READ  Phone Can't See Printer Via Wi-Fi

Menu. #. 159. Down. Ok. Down. Ok
or
Menu. #. 9000 550. Ok

The error will be cleared and you can continue to print.

Why the cartridge does not print after refilling

The article discusses typical cases of printer or MFP failure to print with a freshly refilled cartridge. Separately disassembled options for inkjet and laser devices.

If you have an inkjet printer, then you need to understand where the printhead is located. Look at the bottom of the cartridge if you see one or two straight lines with nozzles. this means that the print head is in the cartridge; if there are no lines, then the print head is in the printer.

Printer does not print after refueling: step-by-step elimination of root causes of malfunction

Depending on the type (design feature) of your cartridge, the process of rebuilding the printhead may vary slightly.

Step # 2: Incorrectly refilled cartridges

The printer does not print after refueling if the shut-off valve is exposed to cold temperatures. Due to the fact that the cartridge has been in the “wrong” position for some time, problems can also arise, since the outflow of ink from the print head under these conditions is simply inevitable. However, after you install the cartridge into the printer, after a few hours you can run a test print mode.

Reason # 5: Hardware

Often times, the user incorrectly installs the cartridge, resulting in the contact plate not reaching the receiving pad of the printer or not positioning properly. It may well be that the device interface is somewhat dirty. Which, in general, is a common thing when refueling cartridges.

Reason # 4: Air

Do not allow air to enter the inner part of the cartridge chamber, since such an “omission” can become the main reason for the same problem that occurs: “After refilling the cartridge, the printer does not print.” This is because air bubbles can prevent ink from passing through the print head nozzles. Therefore, after you have filled the slam-shut containers, close the filling holes with tape.

Reason # 2: Printing

What else may be the problem when refilling cartridges? Various consumables are available for inkjet printers, some of which are characterized as disposable. However, cartridges are no exception. Therefore, pay attention to the marking of your printing element: if it is not refillable, this is a somewhat unpleasant moment, since this type of cartridge is equipped with a special chip that works as long as there is ink in its containers. As a result, the user has to purchase a new consumable item. However, in this case, it is advisable to purchase a high-capacity refillable cartridge (refillable cartridge), which will significantly affect the comfort of servicing the printing element.

Reason # 3: Dry

Nothing foreshadowed problems, but the unexpected happened

After purchasing an inkjet printer (and the article is devoted exclusively to the budget class of printers of this type), the user literally after a few printed photos may find himself in an extremely difficult situation. As a rule, the “Hero of the occasion” is a color cartridge that has exhausted its colorful resources. And all would be fine. took and bought! However, the price of a printing element is sometimes very sobering (often the user is in a state of euphoria, anticipating creative victories). There remains only one acceptable solution. to fill the dried up tank on your own.

NNCXV.INFO 2021