Printer is not added to devices and printers

System rollback

In addition, you can try to roll back Windows 7 to the last restore point. if you have this function enabled.

  • Open the search bar through “Start” and type in “Recovery” there. From the search results, select the one you need and run the recovery program. A window will open in front of you where you need to click on “Next”.
  • Select one of the restore points to which you would like to roll back your system. be guided by the date and time of their creation.
  • Confirm your choice and click “Finish”, after which a warning will pop up in front of you that this procedure cannot be interrupted. click “Yes”.
  • A new window will appear with preparation for restoring Windows 7. At the end of the procedure, the PC will reboot and a message will appear on the screen stating that the OS was restored successfully.

Power management (for laptops)

If you still cannot see the Windows 7 printer, and you are using a laptop instead of a desktop computer, then the problem may lie in the power management of the USB controller. The fact is that the operating system can disable it in the device manager in order to save energy. To solve this problem, follow these steps:

  • Open the “Task Manager” and select the desired branch called “Universal Serial Bus Controllers”.
  • Select “Root USB Hub” and double-click on it with the left mouse button.
  • Select properties and go to the Power Management tab.
  • Look for an entry that allows this device to be turned off in order to save energy. If there is a check mark next to it, then remove it, then save the changes and restart the computer.

Windows 7 does not see the printer. Causes and solutions to the problem

printer, devices, printers

If the Windows 7 operating system installed on your PC does not see the printer, then the most likely source of the cause is old or “broken” drivers. But first, of course, you should check the reliability and stability of the cable connection between the personal computer and the device. If there were any problems with this, and you replaced the cable with a new one, and also reconnected it to a different port, but the problem like “does not see the Windows 7 printer” is still relevant, then you will have to deal with reinstalling the driver for your printing device. This process is quite quick and easy even for beginners. In general, you should do the following:

  • Open “Control Panel” from the “Start” menu. Then you will need to open the “Device Manager” category. To do this, you can go to the control panel in “Hardware and Sound” or right-click on the computer icon on the desktop, then select “Properties” and find the desired item in the list that opens. You can also use the search in the control panel by typing “Device Manager” into the appropriate line and select the desired item from the search results that appear.
  • Having opened the manager with a list of devices installed on your PC, select the desired printer and pay attention to what is highlighted next to it. If it is an icon with an exclamation mark, it means that Windows 7 does not interact with your device in normal operating mode.
  • Click on the name of your device with the right mouse button and select “Properties” from the list that opens. In the new window, open the “Details” tab and in the “Property” drop-down list, click on the “Equipment ID”. After that, a code will appear in the lower field under the name “Value” that you need to select and copy. if there are several of them, then select the topmost one.
  • After closing Device Manager, open any web browser and go to a site that offers the ability to search for the latest drivers by device code. Enter the printer code copied in the previous step into the corresponding search line and click on “Search”. Among the results (if there are several), select the most optimal option and proceed with the download procedure.
  • After the driver file you found is downloaded, run it and install it. Then you just have to restart your PC and check if Windows 7 has started to see the printer or if the problem is still not resolved.
READ  How to disable duplex printing on a printer

Devices are not displayed in the Devices and Printers folder in Windows 7

So, the essence of the problem is as follows, in the Windows 7 “Devices and Printers” folder, the devices installed on the PC, as well as printers, are not displayed. Usually, when you open a folder, the green bar at the top does not reach the end a little and stops. All devices are working fine and are displayed in the device manager. This problem is related to missing or damaged Windows system files. To fix it, you need to identify these files and replace them. We start by identifying system files with errors. To do this, run cmd.exe with administrator rights: “Start. cmd.exe. right mouse button. run as administrator “

or “WinR. cmd.exe. Enter “. A window will appear:

Enter the command “sfc / SCANNOW” and press the “ENTER” key. The sfc / SCANNOW command scans all protected system files and replaces the wrong versions with the correct ones. Type “sfc /?” To see all available options. When scanning is complete, the following text appears:

To create a text file containing a list of files that were not recovered by “sfc.exe”, enter the command “findstr / c:” [SR] “% windir% \ Logs \ CBS \ CBS.log% userprofile% \ Desktop \ sfcdetails. txt “. After its execution, a file “sfcdetails.txt” will be created on the desktop, in it you need to find lines of the following type (there is an entry “Cannot repair member file”):

These are the files that could not be recovered. In the described case, the problem turned out to be with the file “fdProxy.dll”. If you have a similar problem, follow the steps above and replace this file with the one you download below. You can also search for these files in the “C: \ Windows \ winsXS \”.

To replace files, run cmd.exe and enter the following commands:

We make the current user the owner of the file:

example: takeown / f С: \ Windows \ System32 \ fdProxy.dll

To give administrators full access to a file:

icacls Path_And_File_Name / GRANT ADMINISTRATORS: F

example: icacls C: \ Windows \ System32 \ fdProxy.dll / GRANT ADMINISTRATORS: F

Copy Path_And_File_Name_Of_Source_File Path_And_File_Name_Of_Destination

example: copy C: \ Users \ Radon \ Downloads \ fdProxy.dll C: \ Windows \ System32 \ fdProxy.dll

This procedure can be done with other broken files found during scanning.

After all the steps taken, you need to restart your computer.

Installed printers are not displayed in Windows 7 and Windows 8 “MS Windows” Blog of useful articles on the development and promotion of sites

Installed printers are not displayed in the Control Panel, in the “Devices and Printers” folder. With all this, you can install a new printer, it will be successfully installed, but it will not be displayed either. You cannot remove the printer because they are not visible. Try the following:

  • Run Registry Editor (WinR. Regedit.exe. ENTER).
  • Open the branch HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrenTVersion \ Explorer \ ControlPanel \ NameSpace
  • Create a new section in it
  • Set Default to Printers
  • Reboot your computer.

You should also check that the “Print Manager” service and the “Remote Procedure Call (RPC)” service are in the “Running” state.

Other possible problems

In rare cases, the source of the problem like “why the printer does not work on Windows 7” is the local network. The fact is that when working on a PC that is connected to a local network with several printers, some print jobs, by mistake of settings, may unexpectedly go to a completely different printer.

In general, the solution to the problem described above is within the power of even an ordinary PC user and office equipment. The main thing is to clearly follow the described instructions.

Why Windows 7 does not see the printer. We are looking for a solution to the problem Link to the main publication

Why Windows 7 does not see the printer. We are looking for a solution to the problem. Printer not showing up in Windows 7 devices and printers

Windows 7 does not see the printer. Causes and solutions to the problem

If the Windows 7 operating system installed on your PC does not see the printer, then the most likely source of the cause is old or “broken” drivers. But first, of course, you should check the reliability and stability of the cable connection between the personal computer and the device. If there were any problems with this, and you replaced the cable with a new one, and also reconnected it to a different port, but the problem like “does not see the Windows 7 printer” is still relevant, then you will have to deal with reinstalling the driver for your printing device. This process is quite quick and easy even for beginners. In general, you should do the following:

  • Open “Control Panel” from the “Start” menu. Then you will need to open the “Device Manager” category. To do this, you can go to the control panel in “Hardware and Sound” or right-click on the computer icon on the desktop, then select “Properties” and find the desired item in the list that opens. You can also use the search in the control panel by typing “Device Manager” into the appropriate line and select the desired item from the search results that appear.
  • Having opened the manager with a list of devices installed on your PC, select the desired printer and pay attention to what is highlighted next to it. If it is an icon with an exclamation mark, it means that Windows 7 does not interact with your device in normal operating mode.
  • Click on the name of your device with the right mouse button and select “Properties” from the list that opens. In the new window, open the “Details” tab and in the “Property” drop-down list, click on “Equipment ID”. After that, a code will appear in the lower field under the name “Value” that you need to select and copy. if there are several of them, then select the topmost one.
  • After closing Device Manager, open any web browser and go to a site that offers the ability to search for the latest drivers by device code. Enter the printer code copied in the previous step into the corresponding search line and click on “Search”. Among the results (if there are several), select the most optimal option and proceed with the download procedure.
  • After the driver file you found is downloaded, run it and install it. Then you just have to restart your PC and check if Windows 7 has started to see the printer or if the problem is still not resolved.
READ  The printer does not write enough toner what to do

Windows 7 does not see the printer. Causes and solutions to the problem

If the Windows 7 operating system installed on your PC does not see the printer, then the most likely source of the cause is old or “broken” drivers. But first, of course, you should check the reliability and stability of the cable connection between the personal computer and the device. If there were any problems with this, and you replaced the cable with a new one, and also reconnected it to a different port, but the problem like “does not see the Windows 7 printer” is still relevant, then you will have to deal with reinstalling the driver for your printing device. This process is quite quick and easy even for beginners. In general, you should do the following:

  • Open “Control Panel” from the “Start” menu. Then you will need to open the “Device Manager” category. To do this, you can go to the control panel in “Hardware and Sound” or right-click on the computer icon on the desktop, then select “Properties” and find the desired item in the list that opens. You can also use the search in the control panel by typing “Device Manager” into the appropriate line and select the desired item from the search results that appear.
  • Having opened the manager with a list of devices installed on your PC, select the desired printer and pay attention to what is highlighted next to it. If it is an icon with an exclamation mark, it means that Windows 7 does not interact with your device in normal operating mode.
  • Click on the name of your device with the right mouse button and select “Properties” from the list that opens. In the new window, open the “Details” tab and in the “Property” drop-down list, click on the “Equipment ID”. After that, a code will appear in the lower field under the name “Value” that you need to select and copy. if there are several of them, then select the topmost one.
  • After closing Device Manager, open any web browser and go to a site that offers the ability to search for the latest drivers by device code. Enter the printer code copied in the previous step into the corresponding search line and click on “Search”. Among the results (if there are several), select the most optimal option and proceed with the download procedure.
  • After the driver file you found is downloaded, run it and install it. Then you just have to restart your PC and check if Windows 7 has started to see the printer or if the problem is still not resolved.
READ  Is It Possible To Print On A Printer From A Phone

Printer icon not showing in “Devices and Printers” in Windows 10

If you find that the printer icon is not displayed on the Desktop, Control Panel, Devices and Printers, then you may need to tweak the Windows Registry. You must follow the same procedure as you did to get a list of printers using the same printer driver.

System rollback

In addition, you can try to roll back Windows 7 to the last restore point. if you have this function enabled.

  • Open the search bar through “Start” and type in “Recovery” there. From the search results, select the one you need and run the recovery program. A window will open in front of you where you need to click on “Next”.
  • Select one of the restore points to which you would like to roll back your system. be guided by the date and time of their creation.

System rollback

In addition, you can try to roll back Windows 7 to the last restore point. if you have this function enabled.

  • Open the search bar through “Start” and type in “Recovery” there. From the search results, select the one you need and run the recovery program. A window will open in front of you where you need to click on “Next”.
  • Select one of the restore points to which you would like to roll back your system. be guided by the date and time of their creation.
  • Confirm your choice and click “Finish”, after which a warning will pop up in front of you that this procedure cannot be interrupted. click “Yes”.
  • A new window will appear with preparation for restoring Windows 7. At the end of the procedure, the PC will reboot and a message will appear on the screen stating that the OS was restored successfully.

Mistake. Adobe PDF printer missing

Sometimes Adobe PDF printer won’t install during Acrobat Standard DC installation.

Fix your Acrobat installation

Acrobat DC or the resources it uses may be damaged. To restore the installation of these programs, follow the steps below.

Run the patch from Acrobat DC: click Help Repair installation.

Decision. Correct Acrobat installation or add printer manually

To resolve this error, try the following solutions in the order in which they are listed below.

Install the PDF printer manually

Click Start Control Panel Devices and Printers.

Select Add Printer.

From the Add Device menu, select Add a local printer. If this option does not appear, click The printer that I want is not listed.

In the Add Printer dialog box, select Add a local printer or manually configured network printer.

Select the Use an existing port check box and select Documents \.pdf (Adobe PDF) from the drop-down list. Press “Next.

Click the With Disk button. Click Browse and then navigate to the location C: \ Program Files (x86) \ Adobe \ Acrobat \ Acrobat \ Xtras \ AdobePDF

Select AdobePDF.inf from the list. Click the Open button and then the OK button.

Several Adobe PDF converters are listed. Count six lines from the top and select your printer. Click Next (you may need to apply this method several times to find the correct converter for your version of Windows).

Name the printer Adobe PDF. Follow the instructions on the screen to complete the installation.