Printer Prints Hieroglyphs Without Stopping

Instead of numbers, it prints characters how to fix it? Instead of numbers, signs are printed how to disable?

Typically, numeric keys appear in two places on the keyboard. One is on the numeric keypad and the other is above the letters. You may face an issue where your laptop keyboard won’t type numbers. It can be both with a set of numeric keys and with a numeric keypad. In the second cases. he can only dial numbers! This is a strange situation, and today we’ll see what you can do about it.

The most likely causes of this issue could be a disabled numeric keypad, outdated or corrupted drivers, user profile issues, or enabled mouse keys. We strongly recommend that you update Windows regularly to avoid driver problems.

Only a set of numbers works

The main problem can be either the system hardware or the software. If the keyboard is built into a laptop, it will be difficult to isolate the problem. In any case, proceed with the troubleshooting suggested in sequence as follows:

  • Enable Numlock
  • Turn off mouse keys
  • Update your keyboard driver
  • Run Hardware and Devices Troubleshooter
  • Try logging in as a different user.

1] Enable Numlock

One of the most common reasons a laptop keyboard won’t print numbers is because the Num Lock key is disabled. On most keyboards, it is represented by a small LED in the upper right corner. Rather, personally, when I ran into this problem, it turned out that Numlock was disabled.

Press the Num Lock key once to enable the numeric keypad. Either the LED is on or you will receive a message on the computer screen confirming that the numeric keypad is activated.

2] turn off mouse keys

If mouse keys are enabled, you will NOT be able to access the numeric keys. The procedure for disabling the mouse keys is as follows:

Press Win R to open the Run window and enter command control panel. Press Enter to open the control panel.

Go to Ease of Access Center.> Change Keyboard Operation.

Uncheck Enable mouse keys (ignore if already unchecked).

Check if that solves the problem or go to the next solution.

3] Update the keyboard driver

Hardware drivers are responsible for managing the communication between hardware and software on a device. If they are damaged or out of date, hardware devices may not function properly. It can also be a prerequisite that your laptop keyboard won’t print numbers. You can update your drivers as follows:

Press Win R to open the Run window and enter the command devmgmt.Msc. Press Enter to open Device Manager.

Expand the Keyboard section and Right-click the driver for the problematic keyboard.

Select Update Driver and Update Driver.

Reboot the system and check if it solves the problem.

4] Run the keyboard troubleshooter

The Keyboard Troubleshooter is a great tool in Windows 10 to help diagnose problems with connected hardware devices. He checks if there are problems with them and tries to fix them.

The procedure for running the keyboard troubleshooter is as follows:

Click the “Start” button and select “Settings” → “Updates and Security” → “Troubleshoot”.

Select the keyboard troubleshooter from the list of troubleshooters and run it.

5] Try logging in as a different user

If all else fails, the problem may be with the user’s profile. Try logging in with a different account. If your system only has one account, you can create another.

Click on “Start” and select “Settings” → “Accounts” → “Family and other people” → “Add someone else” to this computer. Then follow the instructions to create a new account.

Reboot the system and login as a new user and make sure this solves your problem.

Only numbers are printed

Although the problem with a keyboard is that it cannot type numbers, it is common, as is the case with keyboards, which can only print numbers. This happens with compact keyboards, where manufacturing companies omit the numeric side of the keyboard to make it smaller. In some cases, the numeric keys become additional functions of the letter keys on the keyboard. You will need to press the number key while holding down the ALT key to enter the number.

Alternatively, you can press the Num Lock key and continue entering numbers instead of letters. Thus, if your keyboard will only print numbers, a prerequisite could be either enabling Num Lock or faulty drivers.

Try the previously mentioned solutions 3 and 4 to fix the keyboard driver issues. You also need to press the Num Lock key once to enable Num Lock.

How to enable side numbers on keyboard case

The side panel of the keyboard with numbers is an easy-to-use thing. After all, the keys on it are arranged in the usual order, like on a calculator. Sometimes it is very convenient to quickly calculate something. If these keys fail or break, you have to spend a lot of time typing numbers using the main keyboard. What to do in this case? And how can you enable the set if you don’t have a sidebar at all? Let’s find out!

Any keyboard consists of several blocks. So, you can highlight:

  • Letter block;
  • Functional key block (F1, F4, etc.);
  • Additional numeric keypad block.

In addition, of course, there are action keys (Shift, Ctrl).

Side numbers on the keyboard

In this article, we will look specifically at the additional numeric keypad. On some computers and laptops, it is allocated in a separate sector, on the second it is in close proximity to the letter, and on the third it is completely absent. over, the latter option is typical only for laptops.

On the computer

Keyboards for personal computers are usually larger than those for laptops. Accordingly, manufacturers distribute the free space in such a way that the user is as comfortable as possible with all the keys. Therefore, the numeric keypad is often allocated to a separate sector.

The keyboard prints only numbers or everything but numbers

Typically, numeric keys appear in two places on the keyboard. One is on the numeric keypad and the other is above the letters. You may face an issue where your laptop keyboard won’t type numbers. It can be both with a set of numeric keys and with a numeric keypad. In the second cases. he can only dial numbers! This is a strange situation, and today we’ll see what you can do about it.

The most likely causes of this issue could be a disabled numeric keypad, outdated or corrupted drivers, user profile issues, or enabled mouse keys. We strongly recommend that you update Windows regularly to avoid driver problems.

Printer prints hieroglyphs instead of text: troubleshoot and fix problems

Often, users of printing devices are faced with the problem when, when printing a text document, hieroglyphs begin to appear instead of text. People who DO NOT understand anything in printers, of course, are immediately sent to the warranty center. But in order to solve this problem it is absolutely not necessary to be a specialist. you just need to carefully read the probable ways that can help resolve this situation.

The printer prints hieroglyphs: reasons

All reasons leading to printing failures can be roughly divided into three main groups:

  • Problems in the hardware of the printing device itself.
  • Ink cartridge problems or improper ink supply (CISS).
  • Incorrect installation or configuration of the printer in the OS, as well as other software problems.

The last group is the easiest one to diagnose and fix problems directly by the user. They can be solved in about 95% of cases.

The reasons that are associated with cartridges can not always be solved on your own, but if finances allow, you can simply purchase another cartridge.

Problems in the hardware are most often solved with standard problems, such as a cable break, paper jams. But there may be more serious reasons that require a visit to the service.

How to find and fix problems

The solutions that are described below are very simple, since they do NOT require serious action, but there are quite a few reasons. over, you can do without going to the Repair Shop.

Reboot

If the device starts printing hieroglyphs, then reboot must be performed first. Turn off the PC and printer, and then turn on after a short period of time.

This is probably a minor breakdown that can be fixed with this simple method. If this does not help, then you need to consider other possible options.

Using second software

Most often, incomprehensible text instead of Russian characters appears when printing using MS Word. You can try to print the document with a second software.

You need to resave the text and open it with AdobeReader or Foxit Reader. You can also print in a browser, for example, Internet Explorer or Chrome.

Image printout

You can try to print a picture instead of a text document. Why do you need:

  • Launch the program used to send the document to the device.
  • Find the “Advanced” menu.
  • Click “Print as picture”, check the box.

The device will now print the text document as a drawing. Hieroglyphs instead of Russian letters, most likely, will not be visible.

Changing the font

The reason sometimes lies in scarves. The ego device does not recognize, but prints out hieroglyphs instead of letters. You can try just installing a different font. over, it often helps if you use NOT a standard font (for example, Times New Roman), but another.

You can also try this option: Disable CourierNew stand:

  • On the control panel, find the menu with equipment.
  • Select a broken printer.
  • Click the “Printer Properties” button, go to the “Printer Settings” menu.
  • Find the font substitution and click “Do not substitute”.

System files

Sometimes the cause is in the system files. After restoring them, this may help fix the problem:

printer, prints, hieroglyphs, stopping
  • First, you need to open the command panel as administrator. Enter “sfc / scannow” in it and click “OK”.
  • Wait a certain amount of time. Then check if the problem was resolved.

Driver installation

It is NOT rare that this malfunction occurs due to drivers. The device displays hieroglyphs, as the drivers are incorrectly installed or fail. Then you can try to install them again. For what:

  • In the “Control Panel” you need to go to the “Hardware and Sound” menu and find the faulty printer.
  • After clicking RMB, select “Remove device”.
  • In the “Programs and Features” you need to remove all programs that relate to the operation of the device.
  • Then find the disc, which should come with the equipment. Reinstall Required programs from it.

If the disk is not available for some reason, Windows 7 or an older version most often offers to independently install the required drivers if you reconnect the device to the PC. If this does not help, then you can find the official website of the manufacturer and download the Required programs.

Malicious software

We need to check the PC with an antivirus. The problem may be lurking in this.

These are the main reasons why the printer prints hieroglyphs, and how to solve them. Usually THESE simple actions are quite enough, since this malfunction can appear, then disappear on its own.

Subscribe to our Social Networks

Hieroglyphs instead of Russian letters, instead of text squares, what to do?

Sometimes, when you open a text file downloaded or copied from another PC, it cannot be read. All letters are replaced with hieroglyphs, symbols, squares or other unreadable characters. It happens that letters and numbers are recognizable, but they are in arbitrary places, which makes the text incoherent and NOT readable. This problem occurs not only in documents, but also in browsers when opening some pages. The point here is in the encoding, it must either be removed or changed.

Text documents

It is in the documents of Ward, Notepad, etc. This is the most common encoding. Encoding. a set of characters, thanks to which the text is printed in a certain alphabet. In theory, any document is saved in various encryptions, but users almost never resort to such actions. After that, if you see question marks, etc. Instead of letters, it is unlikely that this was done on purpose. Most likely, due to a system failure in the user who created the document, it was saved in the wrong encoding. In addition, it may also be a malfunction on your PC, as a result of which the file does not open correctly.

READ  How many sheets does a laser printer cartridge last?

The most common problem occurs when using Notepad. Also found in php, css, info and similar text files. Much less common in Word. In addition, confusion with encryption occurs in the browser, where you can also see krakozyabry instead of Russian letters. In the latter case, getting rid of it is especially difficult.

Notepad

The easiest way to open a Notepad document, where instead of letters, squares, is to use third-party software. Notepad is popular. This is the same Notepad, but with additional functions. Has the following advantages:

  • Free distribution;
  • Like Word, it has a button to undo the last action;
  • Supports simultaneous work with multiple files;
  • Allows you to change or select encryption.
  • Automatically adds texts;

To convert hieroglyphs instead of Russian letters, open a Notepad document in this program. In the menu ribbon at the top, find the encoding tab. Click on it. A menu will open listing all their types. It is not always obvious which type of encryption was used, therefore, in order to choose the correct one for transcoding, you need to try several. Highlight the text before.

As encodings are applied, characters in the document can change (one click in the menu) or remain unchanged. As a result, after applying a certain one, the text will become readable.

Bred 3

The program is similar to the previous one. It is a Notepad with advanced features. It is successfully used instead of the standard Windows Notepad. Encodings Are presented in a separate tab in the top menu. Open a document in which only text icons or hieroglyphs are visible, select text, and try changing encryptions one by one. As a result, the text will become readable.

Supports many, even rare, formats. Works with old DOS encoding that modern programs DO NOT open. Works on Windows 8, 8.1, 10.

Sometimes the encoding appears in Word documents as well. Sometimes a prerequisite for the fact that incomprehensible characters appear in the Word is that you have an old Word installed on your PC (before 2007), and the document was created in later versions of the software. Most often, such “new” files simply do not open in the old version, but sometimes they open in a strange encoding. To see if this is the case, look in the File Properties for what format it is. “New” documents are in docx format. Converting the file to word to the old format is not possible. Better to install the update on MS Word. Changing the format of a text document to readable is not difficult.

  • Even before opening the file, the software “understands” that there is a problem in it. When you double-click on it, Word will open a window where it will ask you. in what encoding to open the file. To change the encoding of text in word, execute the algorithm;
  • Try the encoding suggested by the program;
  • If it didn’t work, click in turn on the Suggested types;
  • Try to change the types of encoding and alphabet, types of Cyrillic;
  • As soon as the text becomes readable press OK.

Sometimes a problem of the second nature arises. You are typing text in Word or notepad and notice that numbers are printed on the keyboard instead of letters. The issue is related to Num Look mode and occurs on some laptops. Look at the keyboard. If on the buttons on the right side, in addition to letters, numbers are written, and there is a num lk button at the top, then the laptop is equipped with this mode and you accidentally turned it on. To disable, press the Num Look or FnF11 button. The set of numbers will stop, letters will appear in the usual form.

Hieroglyphs in the browser

Sometimes, when you open a page in a browser, you see the encoded text. These are squares instead of letters in the Opera, incomprehensible symbols in chrome, etc. The reason is a violation of the encoding in the browser. Failures are rare and the developers are to blame for them. But you can fix the failure yourself.

If you have Chrome, then follow the path Settings. Tools. encoding. Move the pointer over it, a menu with encodings will open. If set to Automatic, change to Windows 1251. If another parameter is set, replace it with Windows 1251. If it does not help to open, set “Automatic” or try the encodings one by one.

In Opera, you need to go to the main menu at the top of the window and from there to Settings. Click on Websites and find the Display section. Click on the font settings and at the bottom of the window that opens, find the check box. In it, select Windows 1251. This is a universal option for displaying Russian fonts, no matter what browser is used.

In Firefox, go to the main browser menu. Settings. Content. Advanced. As for Opera, in the check box at the bottom of the window that opens, select the desired encoding.

Now you know what to do if hieroglyphs instead of text.

Why is the keyboard typing numbers on a laptop instead of letters? How to remove numbers

In today’s article, we will analyze a common problem of laptop owners. why the keyboard prints instead of letters with numbers, how to disable this function and will never turn it on again.?

To make it easier for the user to work with the computer, many different hotkeys and their combinations have been added to his system. You probably know many of them, “CtrlC” (copy the file), “CtrlV” (paste the file), “AltCtrl Del” (open the task manager menu), “CapsLock” (change the keyboard case), etc.

But there are also less needed combinations, in which a very small percentage of users know. It often happens that we accidentally pinch some combination or just press a button, thus making serious changes to the work of the PC, and then we DO NOT know how to get everything back.

In today’s article, we will figure out what to do if numbers are printed on your laptop instead of letters, how to fix this situation. So, if in your search engine you see the query “Why does k2aviatura print in numbers on a laptop?”, Then consider that you have already found the answer.

How the problem manifests itself

Before proceeding with the solution, let’s clarify all the nuances in order to understand exactly whether the problem is being discussed. The numbers in your notes can start to appear under a variety of circumstances, but most often the problem appears when working with text documents. over, it can appear both when opening a document, and after some time.

She usually shows herself as follows:

  • Some letters in the right half of the keyboard change to numbers.
  • One or two number buttons can change values.
  • The rest of the number keys and some alphabetic keys just stop working.

If this description fits your problem, then let’s figure it out.

The most unpleasant thing is that do not look at the fact that a problem appears almost always when working with a document, but once it appears, it will remain even after it is closed. That is, now you can normally write a message on social networks, enter a request in the browser and even rename the folder. In most cases, even rebooting the system does not help get rid of this.

Causes of the problem, why k2aviatura prints in numbers on a laptop

Now let’s see why numbers are printed on the laptop keyboard instead of letters. This problem is not a crash or a system error, it is just a kind of additional feature on some notebooks. Launched by pressing the “NumLock” (or “NumLk”) key, which is most often in the upper right corner of your keyboard (sometimes its location may be different). On some keyboards, this key is equipped with a special indicator light, which makes it possible to understand whether the option is enabled or not.

This function is not available on all devices. As we noted earlier, this feature is specific to laptops, and even then not for everyone. It is present only on laptops with a certain keyboard structure.

As you may have noticed, the keys on the keyboard are divided into peculiar blocks, most often a block with letter keys, a block with arrows, a block with numeric keys and a block with keys “F1”, “F2”, etc. In wider keyboards, there may also be blocks with command keys (several keys above the arrows) and a block with additional keys (along the perimeter of the keyboard or above).

So, if there is a block with number keys on the keyboard of your laptop, then most likely this function is present on it. The likelihood of this increases if you have numbers written above some of the letters on your keyboard.

This function allows you to transform the right part of the letters into this same number block. That is why it prints numbers and does NOT print letters. This function can be quite handy when you need to fill out a spreadsheet or write equations. You just need to know how to turn it on and how to remove the numbers back.

Computers have this function for two reasons. First, desktop keyboards are usually large. Secondly, the keyboard for the computer is purchased separately and initially no one knows which keyboard you will use. However, this function can be manually added to the computer.

What to do if the keyboard is typing numbers on a laptop: how to disable the function

If you accidentally pressed a key and now numbers are printed on your laptop instead of letters, what to do in such a situation. The most elementary thing that can be done is to press the “NumLock” key again, perhaps then the function will turn off immediately. Unfortunately, this does not always help.

The fact is that a function can be assigned NOT to one key, but to a combination, for example “FnNumLock” or “FnF11”. If these options do not suit you, then all that remains is to try to find a combination, Alternately pressing the “NumLock” key together with each of the keys on the keyboard, you can also try combinations with “Fn” and all keys from “F1” to “F12”.

If none of the options helped you, then perhaps the reason is that instead of letters, numbers are printed on your computer for another. Read them below.

Other reasons for the problem

A special key or combination. This is not the only way to enable this feature on your laptop. Some applications may also automatically activate this feature. Then if numbers are printed on the laptop keyboard instead of letters, try to remember, maybe you recently downloaded new programs to your PC. If so, remove them and see if the problem persists.

In addition, the function can also be started directly by changing the system registry. It is unlikely that you would have done it by accident, but some viruses can make such changes. You will hardly be able to fix this on your own (you can try to change the language layout of the keyboard, sometimes it helps). You can classify your computer as a wizard, however, even then the chance of fixing the problem is very low. Most likely, you will have to rollback your laptop to an earlier version or even to the factory state.

What to do if your laptop prints numbers, not letters

Thank you for your interest in the article “Why k2aviatura prints with numbers on a laptop instead of letters.” If you find it helpful, please do the following:

  • Share with your friends using the social media button
READ  How to connect a printer to a MacBook via USB

Instead of numbers, it prints characters how to fix?

  • 1 How to enable side numbers on keyboard case
  • 2fixed: Keyboard does NOT type numbers in Windows 10
  • 3 Hieroglyphs instead of Russian letters, instead of text squares, what to do?
  • 4 Why does the keyboard print several letters at once: the cause of the defect, solutions
  • 5 Why is the keyboard typing numbers on the laptop instead of letters? How to remove numbers
  • 6 What to do if lattices are displayed instead of numbers in Excel
  • 7 The keyboard prints only numbers or everything except numbers
  • 7.1 Only digit dialing works
  • 7.2 Only numbers are printed
  • 8 What to do if numbers are printed instead of letters
  • The side panel of the keyboard with numbers is an easy-to-use thing. After all, the keys on it are arranged in the usual order, like on a calculator. Sometimes it is very convenient to quickly calculate something. If these keys fail or break, you have to spend a lot of time typing numbers using the main keyboard.

    What to do in this case? And how can you enable the set if you don’t have a sidebar at all? Let’s find out!

    Any keyboard consists of several blocks. So, you can highlight:

    • Letter block;
    • Functional key block (F1, F4, etc.);
    • Additional numeric keypad block.

    In addition, of course, there are action keys (Shift, Ctrl).

    Side numbers on the keyboard

    In this article, we will look specifically at the additional numeric keypad. On some computers and laptops, it is allocated in a separate sector, on the second it is in close proximity to the letter, and on the third it is completely absent. over, the latter option is typical only for laptops.

    On laptop

    On laptops, the numeric keypad is usually located closer to the letter block. This allows manufacturers to save on the size of the entire device.

    The numeric keypad on the laptop is located closer to the alphabetic

    Otherwise, enabling / disabling the numeric keys is done in the same way as on a computer keyboard. But it so happens that the sidebar of the number keys on a laptop is.

    Keyboard without numeric keypad on the side

    In this case, the developers have arranged the number keys in a slightly different way. They are on letterheads as additional.

    The numeric keypad keys are located on the alphabetic

    over, the number keys can be applied to other buttons. It depends on the publisher.

    To switch the keyboard to the mode of using additional numeric buttons, you need to press a certain key combination. It may differ on different laptops. For example, in our case, you need to simultaneously press the Fn and Ins keys (since the blue color on the Ins button is written NumLock).

    Press the Fn and Ins (NumLock) keys at the same time to enable the numeric keypad

    In general, this action is no different from the usual pressing NumLock on the computer. Only in our case, when NumLock is off, the keys will print letters, and when turned on, the corresponding numbers and mathematical signs.

    Disabling the numeric keys on the right side keyboard (or on the letter key for some laptops) is done in the same way as enabling. Let’s briefly describe the required actions:

    • If you have a side keyboard, pressing the NumLock key will disable it (more precisely, switch to another functionality, as we indicated above).
    • If you have a side keyboard, look for the numbers on the letter keys. In order to disable these numbers (switch them to letters), you need to press a key combination, which may differ for different laptop models. Usually this is the Fn button [some function key].

    Photo gallery: different keyboard shortcuts on different laptop keyboards without sidebar

    Press FnF11 Press FnInsert (Num) Press FnNum (Scr)

    Potential problems and solutions

    It may well be that turning on / off the side keyboard does not affect its operation in any way: you press NumLock, but you still cannot enter numbers. Or one specific button may NOT work. Let’s consider each problem separately and try to find optimal solutions.

    Side keypad with numbers does not work after turning on the computer

    If you want the side panel with number keys to work immediately after turning on the operating system, you need to change the corresponding setting in the BIOS. First of all, restart (turn on) your computer and press the enter button in the BIOS menu. It can be Del, F12 or any other button, depending on the model of the computer (laptop). You can find out which key you need to press on the screen, which appears immediately after turning on the device.

    BIOS menu entry button

    In the window that opens, go to the “Boot” tab. There you will find the “NumLock Key” option (it may have a different name, for example, “NumLock Enable”). Press Enter and switch the value to “On” or “Enabled”. Go to the “Exit” tab and exit the BIOS, saving the changes.

    Enable the “NumLock Key” option

    The next time you turn on the computer, the side keyboard will work immediately.

    Side numbers case don’t work

    If the side numeric keypad does not work when you press NumLock (or another function key), the problem is with that key. The contact may have come off or the keyboard is clogged. One way or another, you will need the help of a specialist.

    Before contacting the service center, it makes sense to check if something is really wrong with this or that button. You can do this using the On-Screen Keyboard.

    To open the On-Screen Keyboard, which is built into Windows by default, open the Start menu. Click on “All Programs” and find the “Accessories” folder. It contains another folder. “Accessibility”. The program you are looking for is here.

    Find the On-Screen Keyboard program in the Start menu

    “On-Screen Keyboard” is a full-fledged replacement for the usual one. The keys in it are pressed with the left mouse button. To check if each individual numeric keypad button works, in the program window, click Options and select Enable numeric keypad.

    Now click on the “NUMLOCK” button in the program interface, and then try entering numbers using the hardware side keyboard.

    Press the “NUMLOCK” button

    If numbers are entered, it means that the problem is in the “NumLock” key. Contact the master to clean the keyboard and check its serviceability.

    By the way, using the On-Screen Keyboard program, you can work without a hardware one at all. For example, if you handed it over for repair. It will also help you if any keys are missing or inconveniently located.

    Letters are typed instead of numbers

    This issue may be familiar to laptop users. If your keyboard prints a number when you press the letter button, then the NumLock mode is enabled. To turn it off, you need to press the key combination, which was mentioned above. In addition, it may be that the letter keys always print numbers after turning on the computer. In this case, disable the “NumLock Key” option in the BIOS. How to do this is also described above.

    Turn off the “NumLock” option if the keyboard is typing numbers instead of letters

    Wrong letters are printed

    This problem is equally common on both computers and laptops. The most common cause of this keyboard behavior is a debris problem.

    Keyboard does not print the correct letters due to mechanical failure

    So, several sensors for pressing keys could stick together or even fail after some liquid was spilled on the keyboard. Note that if your keyboard is typing the wrong letters, the reason is the same. In any case, you need to contact a specialist. It may well be that it will NOT work at all to repair the device. Then you have to buy a new one.

    If you accidentally spill any liquid on the keyboard, it is better to immediately take it to a service center. Even if it works now, the malfunction may appear in weeks, or even months.

    Always keep your computer or laptop clean. Clean the screen and keyboard with a dry cloth or special damp cloths. This will help preserve the health of the device now and save money on repairs in the future.

    Specificity of working with gaming peripherals

    A gaming keyboard is, of course, more expensive (sometimes much) than a regular one. It’s not just about the brand, but also about functionality.

    Gaming keyboard. powerful hardware

    Setting up the gaming keyboard in the driver

    With macros, you can also assign some letter keys to enter numbers. This can come in handy for different occasions. For example, if you need to quickly change weapons in the game, or if the side keys are broken.

    Buying an additional keyboard

    If your laptop has a side keyboard with numbers, and you are not comfortable using the letter keys, it makes sense to purchase an additional keyboard.

    Additional keyboard connects via USB cable

    You can connect this small device to your laptop via a USB cable. The convenience of using such a keyboard lies in the fact that it can be placed anywhere, even taken in hand, as if it were a familiar calculator. In addition, you can turn it off as unnecessary. Convenient when using your laptop on the go.

    The reason for the appearance of the lattices and methods of troubleshooting

    Quite often, the contents of a cell DO NOT fit within its current borders. And when a number is too long, hash (#) symbols or, in other words, octotorp are displayed instead. At the same time, the program stores real values ​​in memory, which are used in calculations, but due to such a visual representation of the data, they cannot be identified, therefore, it becomes difficult or even impossible to work with them. In this case, you can, of course, view the full contents of the cell in the formula bar, but this can hardly be called the optimal solution.

    Note: in earlier versions of the program, such lattices appeared, including when typing, which contained more than 1024 characters. True, this has not been observed since version 2010.

    So, now that we have figured out why the bars appear, let’s figure out how to remove them.

    Move the cell border manually

    To begin with, consider perhaps the simplest method, which allows you to solve the problem by shifting the border of the cells.

    • On the horizontal coordinate panel, move the mouse pointer over the right border of the column that we want to expand. When a characteristic plus sign with arrows in both directions appears, hold down the left mouse button and drag the border line to the right.
    • Releasing the mouse button We should see the contents of the cell. If this did not happen, and the grids are still displayed, then we have not moved the border enough and we need to repeat the first action.

    Align border to cell content

    Here we do not have to manually move the border, trying to guess its new location, which will allow us to display the contents of the cell. The fact is that Excel has the ability to perform this action automatically.

    • Also, move the mouse pointer over the right border of the column, which we want to expand (on the horizontal coordinate panel), then instead of grabbing and shifting the border line, just double-click on it.
    • Column width will automatically adjust to cell content.

    Note: if this action is performed on a column with cells containing data of different lengths, the column width will adjust to the cell containing the largest number of characters.

    Decreasing the font size

    This method is suitable if there is no way to shift the borders of the cells, or when there are too many of them. In situations like this, you can try decreasing the font size. Consider one column as an example.

    • First you need to select the range within which you plan to reduce the font.
    • Switch to the “” tab (if we are not in it), click on the down arrow next to the current font size (the “Font” tool group) and in the drop-down list select a smaller value, which, in our opinion, will allow all the content in the cell Also, the font size can be directly specified in the field for entering values, after clicking inside it.
    • Everything is ready, do not move the border of the column, we managed to make the data visible. If after decreasing the font we still see the pillars, we try to select a value even smaller.
    READ  Where To Find Your HP Printer Pin

    Use auto-fit

    The method also allows you to change the font size in the cells, however, in this case, it will be different, depending on the number of characters. Cell formatting will be used.

    • We select the area for which you want to adjust the font size. By right-clicking on it, open a menu in which we click on the item “Format cells”.
    • In the “Format Cells” window that appears, switch to the “Alignment” tab. In the “Display” parameter block, put a tick in front of the “auto-fit” option, then click OK.
    • As a result, the font size in the cells will decrease (for each cell in different ways, depending on the number of characters), which will make all the information visible.

    Change the cell format

    We have already mentioned earlier that in earlier versions of the program, lattices could be displayed even with too long text. To solve the problem, you need to change the cell format from “text” to “general”. This can be done:

    • In the formatting window (the “Number” tab), which opens by selecting the “Format cells” item in the cell context menu.
    • On the program ribbon, in the “” tab, the “Number” tool group.

    The hash lines in an Excel spreadsheet do NOT indicate any error at all. They only give the user the idea that the cell is not wide enough to display all of its contents when setting the font size. In this case, you can either shift the borders or reduce the font.

    The keyboard prints only numbers or everything but numbers

    Typically, numeric keys appear in two places on the keyboard. One is on the numeric keypad and the other is above the letters. You may face an issue where your laptop keyboard won’t type numbers. It can be both with a set of numeric keys and with a numeric keypad. In the second cases. he can only dial numbers! This is a strange situation, and today we’ll see what you can do about it.

    The most likely causes of this issue could be a disabled numeric keypad, outdated or corrupted drivers, user profile issues, or enabled mouse keys. We strongly recommend that you update Windows regularly to avoid driver problems.

    Why did the printer start printing hieroglyphs instead of text

    When printing on a printer, hieroglyphs can indicate a failure of the internal software of the equipment or computer, the presence of viruses on the PC, a failure of drivers and damage to system files. Hieroglyphs can appear when printed in any program: Word, Adobe Reader and others.

    If the printer prints hieroglyphs instead of text, you must first eliminate the problem of the device itself. To do this, print a test page from your computer or the built-in capabilities of the printer. In the latter case, the exact method can be found in the instruction manual. On certain models, it is sufficient to open and close the lid of the device several times. Somewhere you need to use the buttons on the case.

    When the letter with the report came out of the printer in a normal state, the hieroglyphs are not observed, then the device is working properly. Otherwise, you need to contact the service center to find out and eliminate the cause. When the probe is printed from the computer through the printer properties, and instead of Russian letters, hieroglyphs, and the hardware method produced normal text, then it is worth connecting the printer to the second computer. It is possible that the problem is in the PC, driver failure, as an option.

    Be sure to reset the internal memory of the device. Disconnect the printer from the PC and network. Wait one minute to reset the memory. Re-enable and try to print text. Sometimes there are one-time failures, which are solved in such a simple way.

    Change the program for printing

    Try printing the document in a different program. Often the problem lies in the printing software. You can use software from Adobe or Foxit reader to open PDF files. If Adobe displays hieroglyphs instead of text on the sheet, then you can try to print the file as an image.

    Additionally, try opening the document in a browser and printing.

    The reason may still be in the scarves, which were used when typing. It is always recommended to choose standard fonts like Arial, Tahoma, Verdana, Times New Roman.

    If the Word office suite crashes, then you can save the file in a different format, such as PDF. This is done through the “File” menu. “Save as”.

    Viruses

    Malware can damage both printer drivers and Windows system files.

    For scanning and treatment, you can use free utilities:

    • Web Cureit;
    • Malwarebytes Anti-Malware Free.

    Run one of the proposed programs, do a polo scan of the computer and if threats, infected files are detected, do the treatment.

    Recovery

    Run Command Term as Administrator. In the search for the operating system, write “cmd”, right-click on the Needed option and click “Run as administrator”.

    Then write the command “sfc / scannow” and press the “Enter” key. Wait for the scan and repair to complete. Check the seal.

    Reinstalling the driver

    Sometimes it helps to completely remove the drivers for the printing device and reinstall it. To be sure, you can completely “demolish” the printer from the computer along with the driver, and then re-add, as you did when you first connected.

    Always Analyze the situation, remember the last steps, after which various printing problems arise. I know what was done, what programs were installed or changes were made to the OS, you can easily return everything to its place and correct the printing.

    Printer prints hieroglyphs instead of text

    Often, users of printing devices are faced with the problem when, when printing a text document, hieroglyphs begin to appear instead of text. People who DO NOT understand anything in printers, of course, are immediately sent to the warranty center. But in order to solve this problem it is absolutely not necessary to be a specialist. you just need to carefully read the probable ways that can help resolve this situation.

    The printer prints hieroglyphs: reasons

    All reasons leading to printing failures can be roughly divided into three main groups:

    • Problems in the hardware of the printing device itself.
    • Ink cartridge problems or improper ink supply (CISS).
    • Incorrect installation or configuration of the printer in the OS, as well as other software problems.

    The last group is the easiest one to diagnose and fix problems directly by the user. They can be solved in about 95% of cases.

    The reasons that are associated with cartridges can not always be solved on your own, but if finances allow, you can simply purchase another cartridge.

    Problems in the hardware are most often solved with standard problems, such as a cable break, paper jams. But there may be more serious reasons that require a visit to the service.

    How to find and fix problems

    The solutions that are described below are very simple, since they do NOT require serious action, but there are quite a few reasons. over, you can do without going to the Repair Shop.

    Reboot

    If the device starts printing hieroglyphs, then reboot must be performed first. Turn off the PC and printer, and then turn on after a short period of time.

    This is probably a minor breakdown that can be fixed with this simple method. If this does not help, then you need to consider other possible options.

    Using second software

    Most often, incomprehensible text instead of Russian characters appears when printing using MS Word. You can try to print the document with a second software.

    You need to resave the text and open it with AdobeReader or Foxit Reader. You can also print in a browser, for example, Internet Explorer or Chrome.

    Image printout

    You can try to print a picture instead of a text document. Why do you need:

    • Launch the program used to send the document to the device.
    • Find the “Advanced” menu.
    • Click “Print as picture”, check the box.

    The device will now print the text document as a drawing. Hieroglyphs instead of Russian letters, most likely, will not be visible.

    Changing the font

    The reason sometimes lies in scarves. The ego device does not recognize, but prints out hieroglyphs instead of letters. You can try just installing a different font. over, it often helps if you use NOT a standard font (for example, Times New Roman), but another.

    You can also try this option: Disable CourierNew stand:

    • On the control panel, find the menu with equipment.
    • Select a broken printer.
    • Click the “Printer Properties” button, go to the “Printer Settings” menu.
    • Find the font substitution and click “Do not substitute”.

    System files

    Sometimes the cause is in the system files. After restoring them, this may help fix the problem:

    • First, you need to open the command panel as administrator. Enter “sfc / scannow” in it and click “OK”.
    • Wait a certain amount of time. Then check if the problem was resolved.

    Driver installation

    It is NOT rare that this malfunction occurs due to drivers. The device displays hieroglyphs, as the drivers are incorrectly installed or fail. Then you can try to install them again. For what:

    • In the “Control Panel” you need to go to the “Hardware and Sound” menu and find the faulty printer.
    • After clicking RMB, select “Remove device”.
    • In the “Programs and Features” you need to remove all programs that relate to the operation of the device.
    • Then find the disc, which should come with the equipment. Reinstall Required programs from it.

    If the disk is not available for some reason, Windows 7 or an older version most often offers to independently install the required drivers if you reconnect the device to the PC. If this does not help, then you can find the official website of the manufacturer and download the Required programs.

    Malicious software

    We need to check the PC with an antivirus. The problem may be lurking in this.

    These are the main reasons why the printer prints hieroglyphs, and how to solve them. Usually THESE simple actions are quite enough, since this malfunction can appear, then disappear on its own.