Printer Prints Very Faint How To Fix

5 reasons for faint printing

Attention: use the interactive price list to determine the cost of refueling your cartridge (printer)

If the cartridge prints faintly, this does not necessarily mean that the printer needs repair. You can often fix the problem yourself and without much effort. Today we will look at five common prerequisites for such a situation and suggest what you can do with each of them. The methods described are suitable for most common models:

  • HP LaserJet CM6030;
  • Canon (Canon) LBP 6030;
  • Epson (Epson) and others.

Setting “Economy Printing

This software option is available in laser printers. If you notice that the printer prints faintly with a full cartridge, check it first. This function serves to increase the life of the cartridge by changing the way the dye is distributed. But the quality of the printed data suffers noticeably.

Decision

It is best to turn off the Economy Print function immediately after purchasing a laser printer. Don’t worry about overspending, the savings aren’t really that much. within 70 sheets.

On HP LaserJet devices, the option is located in the Preferences window under the Finishing tab and is a checkbox named EconoMode (save toner). It can also be called slightly differently, such as economy, draft, etc. Just Uncheck it and save your changes. On some second models, including inkjet, the function can be enabled or disabled using the corresponding button on the body.

Out of paint

When the cartridge prints faintly, it could be because toner is running out inside. It is necessary to check whether this is so. Owners of laser printers can also try this method: take out the cartridge and shake it a little (very gently), then put it in place. With a high degree of probability, this will prolong the life of high-quality printing, since the remaining toner will collect together and begin to be actively used by the device.

Decision

Refill the cartridge yourself or Contact the service center for this service. If the printer is inkjet and you are sure that the black or color cartridge was only recently full or even new, then check it for leaks.

Magnetic roller contamination

Another reason why the printer prints faintly is wear or clogging of the magnetic roller due to long-term use. How to fix? Wear cannot be eliminated, it is an irreversible process. But it is quite possible to remove pollution, and even on your own.

Decision

You will need a very strong solvent to remove the toner that has gotten into the “pores” of the device. Acetone is suitable for this purpose. But you need to wipe it carefully, and not using unnecessary efforts. the shaft is rough, and if this roughness is damaged, the print quality will deteriorate. Also, after the procedure, be sure to ventilate the room and observe the full range of precautions mayor. take care of your eyes, respiratory tract.

When all the pores are visually cleaned, you can assemble the cartridge and try to print a letter. After that, the image should be sufficiently clear and of high quality. What if this did NOT solve the problem? Then you have to contact the service center.

Faulty parts for laser printer or all-in-one printer

Faint printing may be due to a physical problem with the product. Often, the problem can be solved only in a radical way. by replacing the magnetic shaft, only its shell, or the metering blade. Also, a contaminated squeegee may be a prerequisite for the prints to suddenly turn pale. It is best to change both the shaft and the blade at the same time, which will significantly extend the service life of the device and significantly increase the picture quality, removed the pallor.

Decision

For the replacement service, it is best to contact the service, since there are many subtleties when assembling and disassembling cartridges! But you can also clean the squeegee at home. When it is used, a strip of compressed toner is formed along the edge on one side. Because of this layer, the squeegee cannot be moved as close as possible to the magnetic shaft; friction is reduced and the print becomes fainter. In this case, it’s time to clean.

No solvents can be used here, they can damage the chemical composition of the part and disrupt its performance. This is especially true for acetone. For a start, dry lint-free rags will suffice. If dry cleaning did not completely remove the Growth, then you can slightly wet a cloth with distilled water. If the build-up still holds, then you will either have to completely change the squeegee, or put up with it and print with defects.

Air humidity too low

In winter, when the heating is turned on, the air humidity regime is often observed in homes and offices. For the normal operation of equipment and the well-being of people, it should be 50-70% (the hygrometer is checked). Nevertheless, in many rooms the indicator drops to 10-20%. And this can really greatly affect the performance of the printer after refueling or at any other time.

Decision

How to adjust the parameter to match the required values? The best solution would be a humidifier, with it people will feel much more cheerful, and the toner on paper will bake exactly as needed.

When installing a humidifier, do not forget about the established norms for the optimal level of humidity. It will be necessary to adjust the device depending on the season and room:

We hope, thanks to our article with a photo, you could figure out why the refilled printer prints faintly and what measures can be taken to fix the problem. And if you still have questions, we invite you to contact our service center in St. Petersburg.

Do not forget to say “thank you”, “like” or repost to the author:

Why does the printer print faintly after refilling?

A laser printer is a very handy device. Especially if it performs several functions at once (all-in-one printer). Its presence makes it possible to print documents, photos, without leaving home. However, sometimes the process is fraught with difficulties. One of them is a fuzzy image. It may appear even after the printer has been refilled and the cartridge is full. Why is the printer faint? What to do in this case?

Checking the settings

The first reason a laser printer prints faintly is its setup. Many models, such as HP or Canon, have an option called “Economical Printing”. It helps to extend the life of the cartridge:

  • First distributes the ink so that there is enough ink for more printed pages.
  • As soon as about half of the paint remains, the device enters the economy mode. As a result, the printer prints too faintly.

Disabling this setting will help fix the situation. Thanks to her, you can print several pages or more photos. However, image quality will suffer.

Checking the Print Setting

Lack of dye

Another reason why a Canon printer prints faintly (applies to other models, such as HP) is not enough dye. If the image is not clear, it is not necessary to immediately run after a new cartridge or carry out the procedure for refilling it.

You should act like this:

  • Get the cartridge,
  • Shake well,
  • Put back.

Thanks to these actions, it will be possible to print tens of more pages of printed text. over, this applies to devices of almost all brands and models, be it HP, Canon or others.

What if the situation has risen? Either refill the cartridge or replace it.

Possible breakdowns

The main parts of the cartridge are the magnetic shaft and squeegee.

  • Thanks to the roller, the dye sticks to the drum unit. The paint receives a negative charge from the shaft. The drum is positively charged. The potential difference promotes adhesion. The higher this value, the more ink will fall on the drum and the sharper the image will be on paper.
  • A squeegee is a device that dispenses paint and distributes it evenly along the magnetic roller.

In normal condition, these parts should not have any chipping. However, during printing, the edges are warped, causing white streaks to appear in images. But most of the time the printer prints faintly.

It should be noted that the cartridges work the same on almost all models of such devices. But the process of their production is different:

  • Metal is used to make HP and Canon magnetic rolls. Their top layer is rubberized. Squeegee from THESE firms polyurethane.
  • Samsung shafts are made entirely of rubber. Squeegee in most cases metal.

An effective way to solve the above problems is to replace the failed parts. The print quality will improve immediately and the image will be brighter.

Sometimes it happens that the shaft and squeegee are NOT worn at all, the cartridge is full, but the HP printer prints faintly. In such cases, it is necessary to clean them from excess paint.

How and what is the best way to do it?

  • The magnetic roller can be cleaned with acetone. Isopropyl alcohol is not recommended. It does not completely dissolve the paint.
  • For the squeegee, it is better to use special lint-free wipes. If necessary, they can be soaked in distilled water.

All movements must be light, without pressure, otherwise the coating will be damaged.

How to refill the cartridge

In order for a laser printer to print high-quality images, it is necessary to properly refill the cartridges.

Both HP and Canon and other models are refueled in about the same way:

  • Cover the work surface with paper.
  • Remove the cartridge.
  • Using pliers, remove the grommets that secure the drum unit. Then get the drum itself. Wrapped it in a clean soft cloth, put it in a dark place.
  • Divide the cartridge into two halves. They are usually attached with pins. They need to be taken out or, conversely, driven inside (removed after opening the part).
  • Carefully, and not touching the rollers with your fingers, remove the rubber element under the drum. Remove the fixing screws and squeegee.
  • Shake out the trash.
  • Collect all parts back.
  • Unscrew the cover of the part of the cartridge that contains the container for paint. Pull the plug.
  • Add toner. It is important that the container is NOT completely filled. This could damage the device. Ideal. standard dye packaging.
  • Replace the plug.
  • Collect cartridge.
READ  Dcp L2500dr Printer Reset Toner

So, we figured out why the printer prints faintly after refueling. There can be many reasons. this is an incorrect setting of the device, and insufficient amount of toner, and cartridge malfunctions. You can solve problems at home. It is enough to replace the defective parts, add dye or reconfigure the printer.

Printer is very faint how to fix? The printer is faint when the cartridge is full

Any owner of a printer or all-in-one printer has to solve various kinds of problems associated with both the hardware and software of the device over time. One fairly common problem is why the printer prints faintly when the cartridge is full. This problem is, perhaps, one of the most urgent among all models of laser printing devices. If your printer begins to print faintly, do not rush to the nearest service center, because you can solve this issue completely yourself. The main thing is to treat it with all seriousness and responsibility, because the sources of this problem can be very different.

In general, a light image is due to insufficient optical density of the laser device. This parameter depends on the charging voltage of the photo roll, the power of the laser flow, the “blackness” of the toner, its amount transferred to the drum and the amount transferred directly to the surface of the paper. Of all the listed values, the amount of dye transferred to the photo roll is of particular importance. the optical density of the print largely depends on this parameter.

The main problems and how to solve them

If you notice that your laser printer prints dimly, then first of all pay attention to the settings of this device. In this case, we are talking about a setting known as “Thrifty Printing”. The fact is that such a function helps to extend the operating life of the device cartridge, however, there is little sense from this, since this can adversely affect print quality. This function helps the device to properly distribute the colorant stock. But when less than half of the toner remains in the cartridge hopper, this setting starts to save it, as a result of which the device produces poor quality printing. In this case, printed documents may become fainter. Therefore, any owner of a laser printer can be advised to disable this function in advance, especially since it can save 40-70 additional pages at most.

If you are tired of a faint print, and even after the refueling has been completed, the printer does not print as it should, then this problem can be radically solved by replacing the sheath of the magnetic roller or the entire magnetic roller, as well as the metering blade. It is better to make such a replacement at the same time, due to which it will be possible to improve the print density parameter and the service life of the listed parts immediately by quite a decent amount. After that, the device should print as it did when it was first used. For the toner cartridge, try to refill it carefully and thoroughly. This will help you with an article on how to refill laser cartridges.

But if you cannot perform the simultaneous replacement of the elements described above for some reason, for example, for financial reasons, then you can resort to some other methods. It should be noted that the roughness of the surface of an element such as a magnetic roller can be reduced for reasons that lie in the wear of this part and filling the “pores” on its surface with a coloring matter. What to do in the first case? It is impossible to cope with shaft wear, because this process is irreversible. But the problem associated with its pollution can be completely solved, and independently. To eliminate the filling of “pores” with toner, it is necessary to clean the shaft using a strong solvent. After that, the printers should produce a sufficiently clear image.

To clean the “pores” of the magnetic roller, purchase such an affordable product as acetone. But at the same time, remember that you cannot use unnecessary effort, because thus, you can break the coating of the shaft and worsen its roughness. Also, do not forget that acetone is a toxic substance and, when using it, you must follow all precautions, including airing the room. I cleared all the “pores” clogged with toner, you need to print a test document. If you are completely satisfied with its quality, then the problem has been solved, otherwise you will have to contact the service center.

As practice shows, in order to solve the problem of faint printing after refueling the laser printer cartridge, it is advisable to also clean the dispensing blade. The fact is that during the operation of the device for printing on the edge of this part, over time, a strip is formed, consisting of a pressed-in toner. This strip pushes the metering blade away from the shaft, which negatively affects the friction force, which gradually decreases. That is why, in order to restore normal printing, you need to clean this part. To do this, you should use dry, lint-free wipes, which, if necessary, can be slightly moistened with distilled water, if during dry cleaning the build-up of the coloring matter has not gone away. If even a damp cloth could not remove them, then it is better to change the blade, or use acetone.

As you can see, the problem with the fading laser cartridge is solved quite simply. But if even after the performed manipulations the device prints faintly, then perhaps the reason is in the device itself, perhaps it is the disease of your printer. Then with materials for a specific model, by selecting it in the right drop-down menu.

Solving faint printer problems

From time to time, almost every owner of a printing device is faced with the appearance of a faint print. However, this difficulty does not always indicate the end of ink in the cartridge. It can be caused by other hardware and software malfunctions that need to be quickly resolved in order to continue printing. Within the framework of this article, we would like to consider all these problems and present the available options for solving it.

Solving the problem with faint printer printing

Each error considered below appears with a different frequency, so you need to start checking with the most effective options, which we recommend doing. All methods of solution are arranged from the most effective and frequent to those rarely encountered in order to simplify the procedure for solving the task.

Checking the cartridge

Of course, at first, suspicions fall on the finished ink in the cartridges, so they should be checked first. We advise the owner of laser devices to carefully take out the ink tank and shake it, and then check the print again. These movements will collect toner residues in one place and allow them to be used normally, ensuring high-quality printing for a while. However, if this does not help, it is necessary to refuel. As for the owners of inkjet devices, here you need to inspect the cartridge for smudges or try it by weight. You will find detailed instructions for refilling the ink tank in our other article, follow the link below.

Disabling economy mode

Economy Printing enabled is the only software issue that causes faint printing. We put it in second place, since the solution is quite simple, and even a novice user can perform the necessary actions. Disable economy mode as follows:

    Open “Start” and go to “Control Panel”.

Click on the required PCM device and find the item “Printing Properties” or “Printing Preferences”.

Move to the “Finishing” tab.

Set the profile “Default” or Uncheck the box “Economical printing”.

After that, it is better to reboot the printer and clear the print queue for the changes to take effect.

Cleaning the fuser roller

In laser printers, toner is baked in a special oven, drying and remaining on the paper. If, in addition to a faint print, you notice streaks on the leaves, most likely the problem is that some of the ink once remained on the upper roller of the stove and is now transferred to the paper, preventing the other ink from hardening. Such an error is solved by simple cleaning of the roller with a napkin or a Cotton pad. However, the printer must be disassembled before doing so. Detailed instructions on this topic are in the material at the link below.

Replacing the drum unit

The imaging drum is one of the most important parts of a laser printer. An image is transferred to it, and then toner is gradually applied. This mechanism forms one of the printing steps. Over time, the drum unit loses its properties and performs less well, which affects the quality of the printed sheets. If you have been using the printer for a long time, it is recommended that you have this part replaced by a dedicated service center.

Cleaning cartridges

Sometimes there are situations when the printer does not print well immediately after refilling, or there is still a lot of ink in the ink tank, and the image appears faint. Then the reason lies in the cartridges themselves and their contamination. There are two ways to get rid of the problem, however, each of them involves first removing the part from the device and manually performing all the actions, which you can read about from our next material.

Above, you were familiar with all the available methods for solving problems with print quality. Of course, almost all of them can be solved independently, however, inexperienced users are better off contacting a master about replacing components. In addition, it should be borne in mind that working in a room with high humidity also provokes the appearance of defects during printing.

Thank the author, share the article on social networks.

What to do if the printer prints faintly?

Why isn’t the look of my prints always perfect? The new cartridge prints flawlessly, but after the first refueling, the print quality may appear faint, the quality is noticeably reduced. If the image looks faint, the optical density is too low. A little deeper into the theory, we can say that this parameter depends on a number of factors:

  • Laser light output,
  • The optical density of the toner (the degree of absorption of light by the coloring pigments),
  • The amount of powder transferred to the paper,
  • The amount of ink that is transferred to the drum during the development process.

The first three factors have nothing to do with cartridges: the first depends on the condition of the printer, the second on the quality of the toner, and the third on the environment and paper. But the amount of powder, which falls on the photosensitive layer of the drum, directly affects the print density. And the wrong layer thickness of the dye powder, which appears due to wear of the cartridge parts, is the main and most common cause of printing defects.

READ  How To Insert Paper Into Printer

What parts affect the print cartridge faint?

The Developer Roller (developer roller, magnetic roller) charges the dye granules with a negative charge. Toner adheres to the drum due to the potential difference between the powder particles on the developer’s surface and the laser-illuminated areas on the drum. The greater the potential difference, the more powder will be transferred, the more saturated the print color will be.

A squeegee is a toner metering blade designed to distribute toner evenly over the developer.

The condition of THESE two parts is critical to the correct transfer of ink to the drum surface.

The new magnetic shaft and squeegee have a perfectly flat surface, without protrusions and notches. During use, toner residues accumulate on the surface of the blade, which leads to its curvature. Light longitudinal stripes appear on the paper. The porous surface of the rubber shaft is clogged with the smallest particles of paint over time, which is also a prerequisite for the appearance of defects on the paper.

The principle of operation of the cartridge is the same for all manufacturers, but the production technology is different. Developers Canon and HP are made of metal with a rubberized top layer, while Samsung is made entirely of rubber. The material for Samsung and Brother squeegees is metal, while Canon and HP make blades from polyurethane. This polymer is stronger and more reliable than metal; only low-quality toner with large and “prickly” particles can damage such a squeegee.

How to fix faint printing on your own?

The most effective way is to replace the squeegee and the developer (entirely or only the shaft shell), and it is better to change both parts at the same time. The result appears immediately: the print density increases, the image becomes saturated. But if, when disassembling the cartridge, you see that these parts are not worn out or damaged, but simply dirty, then you can do without replacing them. Use a strong solvent to remove excess toner from the pores of the magnetic roller and the surface of the dispensing blade.

Acetone is well suited for a developer, but isopropyl alcohol is not recommended: it dissolves toner poorly and can worsen the situation, finally clogging the pores of the shaft with half-dissolved powder.

Do not wipe the polyurethane squeegee with acetone, it can reduce the elasticity of the surface: Use special dry, lint-free wipes. To remove dried toner, you can moisten it with distilled water.

When performing work, it is important to observe the following rules:

  • To avoid poisoning with a volatile toxic substance, it is necessary to carry out work in a well-ventilated area;
  • Clean the shaft carefully, without effort, so as not to damage the coating of the developer.

Why sometimes it is worth contacting the service center?

We have described the most likely reasons for the printer to print faintly after refilling. It is not difficult to change the squeegee, replacing the magnetic shaft is a more complicated procedure, there is a risk of damaging a rather expensive part.

But the reason for the decrease in optical density of printing may lie elsewhere: in HP and Canon cartridges, the appearance of light areas after several refills is usually caused by the deterioration of the photocell, and not by the wear of the above parts.

It may happen that you have changed all the details, but the problem remains. So it’s a bad toner. Or that you incorrectly corrected a problem, for example, damaged the magnetic roller during the cleaning process. Or maybe it was not at all in him, but in damage to the photosensitive layer of the drum. Inexperienced masters, having incorrectly identified the source of the problem, change everything: from the key components of the cartridge to the printer itself.

If cleaning the metering blade and developers didn’t help, the best way is to print a test page and contact a service center. By the nature of the defects, the master will immediately identify the cause of the appearance of discolored areas and suggest the best ways to eliminate it.

Why does the printer print faintly after refilling?

A laser printer is a very handy device. Especially if it performs several functions at once (all-in-one printer). Its presence makes it possible to print documents, photos, without leaving home. However, sometimes the process is fraught with difficulties. One of them is a fuzzy image. It may appear even after the printer has been refilled and the cartridge is full. Why is the printer faint? What to do in this case?

Checking the settings

The first reason a laser printer prints faintly is its setup. Many models, such as HP or Canon, have an option called “Economical Printing”. It helps to extend the life of the cartridge:

  • First distributes the ink so that there is enough ink for more printed pages.
  • As soon as about half of the paint remains, the device enters the economy mode. As a result, the printer prints too faintly.

Disabling this setting will help fix the situation. Thanks to her, you can print several pages or more photos. However, image quality will suffer.

Checking the Print Setting

Lack of dye

Another reason why a Canon printer prints faintly (applies to other models, such as HP) is not enough dye. If the image is not clear, it is not necessary to immediately run after a new cartridge or carry out the procedure for refilling it.

You should act like this:

  • Get the cartridge,
  • Shake well,
  • Put back.

Thanks to these actions, it will be possible to print tens of more pages of printed text. over, this applies to devices of almost all brands and models, be it HP, Canon or others.

What if the situation has risen? Either refill the cartridge or replace it.

Possible breakdowns

The laser printer prints faintly after refilling and due to cartridge breakage. This element is NOT durable, therefore it often fails. Any problem of any complexity Decreases the brightness of the print, even if the cartridge is full.

The main parts of the cartridge are the magnetic shaft and squeegee.

  • Thanks to the roller, the dye sticks to the drum unit. The paint receives a negative charge from the shaft. The drum is positively charged. The potential difference promotes adhesion. The higher this value, the more ink will fall on the drum and the sharper the image will be on paper.
  • A squeegee is a device that dispenses paint and distributes it evenly along the magnetic roller.

In normal condition, these parts should not have any chipping. However, during printing, the edges are warped, causing white streaks to appear in images. But most of the time the printer prints faintly.

It should be noted that the cartridges work the same on almost all models of such devices. But the process of their production is different:

  • Metal is used to make HP and Canon magnetic rolls. Their top layer is rubberized. Squeegee from THESE firms polyurethane.
  • Samsung shafts are made entirely of rubber. Squeegee in most cases metal.

An effective way to solve the above problems is to replace the failed parts. The print quality will improve immediately and the image will be brighter.

Sometimes it happens that the shaft and squeegee are NOT worn at all, the cartridge is full, but the HP printer prints faintly. In such cases, it is necessary to clean them from excess paint.

How and what is the best way to do it?

  • The magnetic roller can be cleaned with acetone. Isopropyl alcohol is not recommended. It does not completely dissolve the paint.
  • For the squeegee, it is better to use special lint-free wipes. If necessary, they can be soaked in distilled water.

All movements must be light, without pressure, otherwise the coating will be damaged.

How to refill the cartridge

In order for a laser printer to print high-quality images, it is necessary to properly refill the cartridges.

Both HP and Canon and other models are refueled in about the same way:

  • Cover the work surface with paper.
  • Remove the cartridge.
  • Using pliers, remove the grommets that secure the drum unit. Then get the drum itself. Wrapped it in a clean soft cloth, put it in a dark place.
  • Divide the cartridge into two halves. They are usually attached with pins. They need to be taken out or, conversely, driven inside (removed after opening the part).
  • Carefully, and not touching the rollers with your fingers, remove the rubber element under the drum. Remove the fixing screws and squeegee.
  • Shake out the trash.
  • Collect all parts back.
  • Unscrew the cover of the part of the cartridge that contains the container for paint. Pull the plug.
  • Add toner. It is important that the container is NOT completely filled. This could damage the device. Ideal. standard dye packaging.
  • Replace the plug.
  • Collect cartridge.
printer, prints, very, faint

It is worth remembering that in laser printers, the cartridge can withstand up to 15 refills. Refueling with replacement Some elements (shaft and squeegee) are refurbished. Its feasibility depends on the capacity of the cartridge. If it is increased, the restoration should be carried out with each filling. If the cartridge is standard, this procedure is performed much less frequently.

So, we figured out why the printer prints faintly after refueling. There can be many reasons. this is an incorrect setting of the device, and insufficient amount of toner, and cartridge malfunctions. You can solve problems at home. It is enough to replace the defective parts, add dye or reconfigure the printer.

Why does the printer print faintly?

By Igor April 26, 2014

A fairly popular question for novice users is why the printer prints faintly. Without going into details, it is rather difficult to give an exact answer to this question, due to the huge number of possible user errors.

These errors may include incorrect printer settings, the use of graphics programs in which all settings are “default”, the wrong paper type is selected, etc.

For an exact answer to the question of why the printer prints faintly, it is necessary to study the entire sequence of user actions, in 9 cases out of 10 the prerequisite for the faintness of the print is the actions of the novice operator.

Also, a prerequisite for faint printing of images on a printer may be excessive savings on consumables, especially in small offices, where they are trying to save on everything. For high-quality accounting of expenses and income in small offices, it is recommended to use 1C accounting software. Which will allow you to adequately look at the cash flows of your company and competently conduct accounting. With a qualitative approach, you can get money savings without loss in quality.

Another common prerequisite for faint printing is the use of graphics programs. If you work with graphics and send a print queue directly from the program, you should familiarize yourself with the standard print settings, check if everything is entered correctly, make your changes and make a test print. For the convenience of changing and testing print settings from graphics programs, I recommend using color scales and gradients, which can be found freely available on the Internet and downloaded. As an example, you can use the color profiling scale, as in the photo of this review.

READ  How To Connect A Printer To A Windows 10 Computer

Using such a template, you can quite easily and quickly test print and calibrate the settings to your taste. Believe me, making small adjustments to the print settings in graphics programs dramatically change the result of displaying the image that will be printed on paper. We will NOT take into account our usually not calibrated monitor, this is a topic for a separate article.

I have met users who have worked with the program and have been printing for years, and printing photos, but they did not even think that the default print settings were set to medium quality (Text and Images!). I’m not kidding, this is a real example of our client. There is a small salon in our city that provides services for the production of photo souvenirs, in particular, printing photos on mugs. Printing was carried out with sublimation ink on a six-color photo printer. Everything is fine, photo printer, photo printing, but when they first called us for ink refills, I refueled and told them to try to print something for a sample. I was really surprised when I saw that only the main PRINT and OK buttons were pressed when sending to print. In the PARAMETERS button, the girl did not know anything, she said that she had never used it! And then we wonder why the printer prints faintly.

The most common mistake of users who complain about faint printing of the printer is choosing the wrong paper type. It should be borne in mind that the standard printer driver contains several color profiles, which are sorted by name for convenience: plain paper, matte photo paper, gloss, super gloss, etc. Using the same image, but choosing different types of paper, the printer generates ink in different ways.

In the case of choosing plain paper, the printer tries to “pour out” as little ink as possible, which is set by the driver, taking into account the low density of the paper and the purpose of plain paper for text, graphics and simple drawings. In the case of choosing photo paper, the printer settings, on the contrary, try to “pour” ink on the photo paper as abundantly as possible so that the print is bright and juicy.

A simple example: we take a photo and throw it for printing, while forgetting to tell the printer that we will use photo paper, but we ourselves insert the most expensive glossy paper into the printer tray and wait for the result. By default, as a rule, the printer has a parameter. plain paper, respectively, there is an ink saving and our gloss obviously will not be able to its ink norm. As a result, we again get the question. why does the printer print faintly??

There are many more factors for faint printing, but I’ve pointed out the most common ones in this review. I’d like to believe that among the readers of our blog, all users have an excellent level of knowledge in this area and receive only high-quality and bright prints.

Printer slow printing problem. Reasons and solution

Each user of office equipment, in particular a printer and an all-in-one printer, often has to deal with a variety of tasks. One is that the printer is slow to print. Such a problem can be associated with both the computer and the printing device itself, and with their connection. But you can solve it completely independently, and not resorting to the help of masters. First of all, you will need to print a report from the device itself. To do this, before printing, hold down one or two keys for 3-4 seconds. you can find out more detailed information in the instructions supplied with the printer. If the report prints out fairly quickly, then the problem is either the PC or the connection.

Solving a problem with the printer

So, if the printer starts to print slowly, then replace the device cartridge. over, for this purpose, it is advisable to purchase an original consumable, so that in case of failure, make sure that the cartridge really has nothing to do with it. If this method did not help and the printer still “thinks” for a long time before printing documents, then Reset its settings.

Another reason the device thinks for a long time is the queue of documents to be printed. This aspect pauses work only for a while, leaving the possibility of further printing only after restarting the PC or printer. You may need to delete all the files that have accumulated in the digital queue. Such a moment can also seriously affect the printing speed of the device.

Solving a connection problem

But what if the reasons that the device “thinks for a long time” are related to its connection to a personal computer or laptop? First of all, you should check the USB (if connected via USB). In this case, the contacts may become clogged or the cable may be damaged, especially if it reaches a length of 2-3 meters. With the first problem, you must disconnect the contacts and thoroughly clean them, with the second, use a second new cord, preferably shorter and thicker. Also try plugging the device into a different USB port. best on the back of your PC system unit. If all the described recommendations did not help and the printer still slows down the printers, then the problem most likely lies in the computer.

If the connection between both devices was established via WI-Fi, then the printer may be too far from the router. Therefore, place the printer as close to it as possible and try to print some test pages. But if this does not get better, then the problem may lie in the router itself. Reset its settings and configure again. Of course, the procedure is quite time consuming, but perhaps it will be a real salvation for you.

Solving computer problems

To answer the question of why the printer prints slowly, check that all settings for this device are correct. To do this, go from Control Panel to the “Hardware and Sound” tab, then open “Devices and Printers”. Right-click on the icon for your printer or multifunction device and select “Printing Preferences” there. There you should check the paper settings and print quality. If in the latter case the “best” is set, then keep in mind that this parameter will certainly slow down the printing of documents somewhat. Also note the check mark next to Quiet Mode. the device will generally slow down the print speed to reduce noise. If necessary, all the settings, making them “default”.

So, if such a problem as “printer prints slowly” is still not solved, then you can increase the amount of RAM, i.E. RAM. This action should help speed up your printing device. However, this method will be effective only if your printer uses “RAM”. The number of models of devices for printing, using RAM to increase speed, is minimal today. over, in most cases we are talking about laser devices.

You can also completely remove the driver, then download it from the official website and install it again. In addition, to solve the above problem, you can use special service utilities, for example, Canon Tool Box, HP Print and Scan Doctor, and some others. Also scan your PC for viruses and repair any damaged system files. You may have connected your printing device to a weak PC. Reconnect and test it on a more modern computer.

What to do with faint laser or inkjet printing

If, after refilling the cartridge, the printer prints faintly, but there is enough dye, it is most likely that insufficiently qualified personnel are working in the service center. Poor ink quality can be the cause of dull print when the cartridge is full.

Little ink or toner

Checking the Toner Level in a Laser Print Cartridge.

  • Turn off the power button on the device and unplug the power cord from the outlet.
  • Opening the cover on the front of the printer.
  • Pulling out the cartridge.
  • We shake it up. Best done outdoors, on a balcony, or in a well-ventilated room.

Determining the ink level of an inkjet printer.

  • Disconnect the device from the network.
  • Open the lid.
  • Takes out each can of dye in turn.
  • Check the amount of ink in the can.
  • A can with less paint than the required level requires refueling.

Poor refilling of cartridges

When servicing in the SC, they could incorrectly assemble the cartridge, not check for the presence of conductive grease on the contacts of the imaging drum, or even fill in counterfeit dye.

How to refuel correctly

Poor quality consumables

Economy Print Mode is on

A new cartridge can only print faintly as a result of a factory defect. If this reason is excluded, you need to refer to the print settings. The user could have intentionally or mistakenly turned on economy mode.

  • Click on “Start”.
  • Choose “Control Panel”.
  • Click on “Devices and Printers”.
  • From the list provided, select the required device and right-click on it.
  • Go to print settings.
  • In one of the tabs find the section “Print quality”.
  • Choose “Standard”, “High” or any higher than the current value.

After making changes to the settings, the printer must be rebooted and the print queue cleared.

Cartridge malfunctions

If the cartridge is new, the reasons for poor printing may lie in breakdowns or wear of SEPARATE parts of the printer.

  • Fotoval. This is a cylinder 30 cm long and 2-3 cm thick. From above it is covered with a green or blue photocell. The coating is erased during operation. The edges of the photo roll will wear out faster, then black stripes will be visible on the printed sheet along the edges. When the layer wears out completely, the output will be an even faint print.

Stove problems

Understanding how laser printers work provides insight into why prints get faded.

    The laser beam in the right places changes the charge of particles on the surface of the drum to the opposite. This is how an invisible drawing of the printed document is applied.

When streaks appear on the printed document, ink may have spilled onto the top of the fuser roller. To fix the problem, just clean the roller with a napkin or sponge.

Low humidity

Due to the low air humidity, the oven of the laser printer does not bake the dye well. It is enough to move the printer to another room, let it stand for several hours under the new conditions, and try printing again. If transfer is not possible, you can use household humidifiers.

Cleaning cartridges

If after a full refill of ink the problem persists, but no damage is found in the printer or in the cartridge, the reason may be contamination of the ink tank itself. Remove the cartridge from the printer and gently wipe the nozzle with a clean cloth. If the napkin is still clean or has only faint streaks of ink, cleaning is required.