Samsung Galaxy phone screen won’t turn on

samsung, galaxy, phone, screen, turn

Display (screen) not working in Samsung phone

Remember, if the screen on your Samsung phone is not working, then it’s time to contact a service center. If the mobile body looks completely intact, there are no slightest cracks, there are no smudges on the display, then the reasons may be as follows:

Sometimes the display on a Samsung phone stops working due to the fact that the screen itself, that is, the matrix, is damaged. Most modern smartphones from Samsung (A-series: Galaxy A3, A5, A7; S-series: Galaxy S5, S6, S7, S8; also some J-series models) use amoled matrices, one of the disadvantages of which is fragility. If they are damaged, as a rule, outwardly there may be no signs, since small cracks are under the glass and they can only be viewed from a certain angle. The outer glass very often remains completely intact, the phone boots up, makes sounds when touched, you can even pick up the phone from memory when there is an incoming call, but there is no image or backlight, only the touch buttons at the bottom of the screen next to the home button are lit. Do not try to make repairs yourself: not only is it difficult, but you can also aggravate the breakdown by damaging the loop of the touch buttons, the back glass cover, etc. Remember, our service center will solve your problem in a matter of hours: we always have the right original parts. If even you have the slightest doubt, then do not risk it: immediately take the phone to the masters, because only they will carry out a high-quality replacement.

Samsung Display Repair Prices

Model Glass replacement (rub.) Display replacement (rub.)
Galaxy A5 2017 (A520f) 3500 from 5500
Galaxy A7 2017 (A720f) 3500 from 5500
Galaxy A6 3500 from 5000
Galaxy A6 3500 from 5500
Galaxy A7 3500 from 5500
Galaxy A8 3500 from 6000
Galaxy A8 3500 from 6500
Galaxy A9 4500 from 6500
Galaxy A10 3500 from 5000
Galaxy A20 3500 from 5000
Galaxy A30 3500 from 5500
Galaxy A40 3500 from 6000
Galaxy A50 3500 from 6000
Galaxy A70 4500 from 7500
Galaxy A80 5500 from 7500
Galaxy S6 Edge 5500 from 6500
Galaxy S7 Edge 6500 from 11000
Galaxy S8 7500 from 11500
Galaxy S8 8500 from 12500
Galaxy Note 8 9000 from 13500
Galaxy S9 9000 from 13500
Galaxy S9 10000 from 14500
Galaxy Note 9 9500 from 13500
Galaxy S10e 9500 from 14000
Galaxy S10 10500 from 16000
Galaxy S10 11000 from 17000

Often a black screen appears in a Samsung phone: if the microcircuit that is responsible for controlling the screen, or some components in its strapping fail. It is quite difficult to replace them with improvised tools.

In rare cases (one in a thousand), the display does not turn on in a Samsung phone due to the fact that it has recently “landed” on a hard surface and the connector has come off the main PCB. In our center, it can be done in the shortest possible time or even in the presence of the client.

Of course, there may be a completely different kind of problem that can only be identified after a thorough diagnosis.

How to fix Samsung Galaxy Black Screen of Death

Some have reported that the Samsung Galaxy series will have a black screen after turning on the smartphone. The problem is the Galaxy buttons light up as usual, but the screen stays black and nothing appears. Galaxy screen is not displayed. turns on at random times for different people, but a common problem is that the screen doesn’t wake up. There are several factors explaining why this happens, mostly related to the software of the device. However, is it possible to fix Samsung Galaxy S9 / S8 / S7 / S6 / S5 / S4 / Note 9 / Note 8 / Note 5 / Note 4 black screen of death? Keep reading the next article and you will find an easy way to fix black screen Samsung phone and recover all data from it.

Way 2: Hard Reset Samsung Phone to Restart Android System

When your phone is stuck on black or blank screen of death If method 1 doesn’t work, you can try hard reset your Samsung Galaxy phone to factory settings, this way you can unlock Google account, unlock pattern lock on Android Samsung device. but this will result in data loss. However, before performing a hard reset on your phone, back up your phone. Then follow these steps to factory reset your phone (e.g. Samsung Galaxy S6 / S6 Edge):

Turn off your Samsung Galaxy S6. If your device won’t turn off, take out the battery for a second and put it back in.
Now press and hold Volume up. Home and power buttons together until you see Android on screen.
Use the volume down button to highlight “wipe data / reset” and then press the power button to select it. Then select “Yes delete all user data” to confirm this.
Wait until you see the “reboot system now” icon, and then use the power button to select it.

When the phone restarts everything will be erased and ready to be set up again.

READ  How to set the time on a Samsung TV

Note: If your Samsung phone wakes up from a black screen by forcibly restarting the device or booting the device into recovery mode, both methods may erase data and settings. If you want to fix Samsung black screen without data loss, we recommend using third party Broken Android data recovery and fix tool to fix it, no data loss will occur after restoring Android OS to normal.

boot your Samsung device into recovery mode

The first way to put your Samsung phone into recovery mode is as follows:

Turn off your Samsung device. Then press and hold Volume Up, Home and Power at the same time.
When the phone vibrates, release the power by holding down the other two buttons until the Samsung screen appears.
From the main menu of recovery mode select “wipe cache partition” (You can press the volume down and power buttons to select it.)
After clearing the cache partition, your Samsung Galaxy will restart automatically.

How to Fix Black Screen Samsung Phone and Recover Data

Selena Comez Updated on August 30, 2019

[Conclusion]: Is your Samsung phone stuck on a black screen of death? Don’t worry, this article will show you how to fix black screen Samsung phone by force restarting the device; booting the device into recovery mode or using a third-party Android troubleshooting tool.

What Causes Samsung Black Screen of Death

We often discuss what causes Samsung phone black screen of death, the following reasons can cause your phone to get stuck in black death status screen.

  • Black screen after software update
  • Black screen issue when launching on official firmware
  • Black screen not responding
  • Black screen after falling
  • Random black screen of the question of death
  • System crash, slowness or lag, multiple restarts, battery drain faster and green blinking can cause black screen of death

How to fix Samsung Galaxy Sudden Death and recover data from it?

The first step you need to face and this can be done by launching the Android Toolkit on your computer and selecting the scan option. After the scan is complete, you fill in the Find button named Broken Android Data Extraction, which you need to click.

Connect Samsung Galaxy S6 to Computer
Then connect your Samsung to your computer using USB. After that select the “Broken Android Data Extraction” option and proceed to the next step.

Select the type of sticking of your Samsung
You have to choose the stuck situation that suits your device.

Here you have to select “Black Screen”, and then click on the “Next” button.

Choose your name and phone model.
You should understand the fact that the software and data extraction program is different for all Android devices. So you have to choose the correct Android version as well as the exact model you are using.

Put Samsung Galaxy into Download Mode.
After connecting your Samsung which is stuck on a black screen to your computer, a popup will appear with the Android toolbox as shown below. To continue, select one of the displayed situations in the pop-up window.

This is the step of entering phone boot mode and starting with screen recovery.
There are three separate steps you must follow, which include:
1) Hold the power button to turn off the phone
2) Next, you must simultaneously press the volume down key, the power key, the power key and the return key to the main screen.
3) Next, leave all the keys and press the volume up key to enter the phone boot mode.

Download the appropriate recovery package
When the phone goes into download mode successfully, the Android toolkit will detect it and display the device model, Android version, etc. The software will start downloading the appropriate recovery package for the Samsung device.

Fix Samsung Galaxy Black Screen
After the download of the recovery package is complete, the software automatically starts to repair the phone and returns it to normal. The phone will reboot and return to normal as usual.

Start to recover data from black screen Samsung phone
After finishing the installation of the repair package on broken phone, the program will help you to scan and recover all files from Samsung phone with black screen, click “Recover” to extract and save all Samsung data on computer.

Download Android Toolkit for free. Broken Android Data Extraction and try to fix your black screen, you can get data from it as well:

Steps to fix Samsung phone with black screen of death

Note: It is highly recommended that you back up your Android data before opting to repair Android.

Run Android Toolkit on Windows Computer
Download, install and run the Android Toolkit on Windows 10/8/7 / XP computer, then click “Repair” Go to Android system fix function.

Connect Samsung Phone to Computer
Connect your Samsung Galaxy phone with black screen to your computer using a USB cable. Click the “Android Repair” icon Among the 3 options.

Select your Samsung phone model and more information
On the device information screen, select the correct brand, name, model, country / region, and carrier information. Then confirm the warning and click “Next”.

select device information

Confirm to fix your Samsung phone
Android repair can delete all data on your device. Enter “000000” to confirm and continue.

Boot Samsung Phone in Download Mode
Before repairing your Samsung phone, you need to boot the Android phone in download mode. To boot your Samsung phone in DFU mode, follow these steps.

Galaxy A51: How to Fix Black Screen or Screen Won’t Turn On (6 Easy Fixes)

For a Samsung phone with a Home button:
1) Turn off your phone or tablet.
2) Press and hold the Volume Down, Home and Power buttons for 5 and 10.
3) Release all buttons and press the volume up button to enter download mode.

For a Samsung phone without a Home button:
1) Turn off the device.
2) Press and hold the Volume Down, Bixby and Power buttons for 5 and 10.
3) Release all buttons and press the volume up button to enter download mode.

Start Downloading Firware Package for Samsung Phone
Then click Next. Android Toolkit will start downloading the correct firmware for the device.

Fix Android System to Normal
After downloading and checking the firmware, the program automatically starts fixing system problems on your Samsung phone.

READ  Where is music stored on Samsung


Reboot your Samsung phone
After a few minutes, the Samsung phone will restart and return to normal.

Android Toolkit. recovery (Android) for Windows version and start to restore the normal operation of the Android system.

Clearing the cache

Formatting the phone memory partition that stores the entire cache.

  • Enter the recovery by holding the “Volume Up” and “Power On” buttons on the switched off device until an inscription with the name of your phone model appears on the screen
  • After starting the recovery, using the volume buttons, select “Wipe cache partition” and then press the power button to complete the process
  • When finished, select “Reboot system now” by pressing the power button.
  • The attempt was unsuccessful? After restarting the device did not work properly? Moving on to more complex ways.

    Samsung Galaxy won’t turn on. we restore the work of the smartphone

    Sometimes Samsung Galaxy smartphones or tablets may stop turning on for no reason. The Android operating system crashes, but most often users have problems due to the pre-installed ROOT rights. Now you will learn how to revive the device, if, of course, this is not a hardware failure.

    There are several ways and we will start with the most obvious and simple ones.

    Factory reset

    All data will be lost, including unsynchronized contacts, messages, call history, application data, and files in the phone memory. The contents of the memory card will remain intact.

    • Enter the recovery by holding the “Volume up” and “Power on” buttons in the off state of the device.
    • Select “Wipe data / factory reset” from the list and press the power button
  • After the process is complete, select “Reboot system now” and wait for the device to start.
  • Flashing with ODIN

    If after resetting the parameters, the device does not work, then you should try to reflash it. We are looking here for the firmware for your smartphone model, download the ODIN program from this link and install the drivers for Windows, and then proceed to the instructions.

      Launch the ODIN application by unzipping it before

  • In the off state of the device, we hold down the “Volume down” and “Power” buttons, and then press the volume button up
  • We connect the phone to the computer, press the key with three dots opposite “AP” and select the firmware file, which is in the.md5 format
  • After a minute or more, the “Start” button should become active. Click on it when it becomes possible and then the firmware process will go.
  • In a few minutes, the gadget should automatically reboot. If you are stuck with the loading animation then try doing a factory reset again.
  • Check charger and cable

    Perhaps your Samsung smartphone is dead and won’t turn on. You plugged in the charger but nothing happens. First of all, try to take charge from another gadget, and if the phone reacted to it and began to receive a charge, then the problem is in it. The next step is to change the USB cable to determine what exactly stopped working. If, after replacing the wire, your charger starts charging the smartphone battery, then the reason is its malfunction.

    Samsung tech support tip

    Following the advice of Samsung technical support, we suggest trying the following very effective way to restore your mobile phone to work:

    • Press and hold the “Volume Down” and “Power” buttons
    • Hold them for 7-12 seconds
    • If after that your device started working, then a very common failure occurred in its operation.

    If the problem persists, then move on to the next solution.

    We carry Samsung Galaxy to the service center

    If none of the above solutions to the problem suits you and the phone still does not turn on, then you need to go with it to the Samsung service center. They will probably find out the reason for the loss of working capacity.

    II. Screen not responding to touch

    Screen insensitivity is usually caused by a system glitch, be it software or hardware. The software problem will be easier to fix. Some of the reasons for an unresponsive screen are:

    Your Samsung Galaxy phone is frozen, frozen;

    There is an error in one of the hardware inside the device.

    Reboot Phone

    Samsung sensor not working problem or freezing problem can be solved by turning off the phone and turning it back on. Press and hold the power button and volume down button for 7 seconds. The phone will be disconnected. The issue will most likely be resolved after downloading it. If the phone does not respond, remove the cover and remove the battery, then reinsert and turn on the phone.

    Why is the sensor not working on Samsung? Fixing in 10 ways

    Samsung Galaxy phones, especially Samsung Galaxy S3, S4 and S5, are known for their problematic screens. Many users either have a blank screen, a black screen, despite the fact that the phone is fully charged, answering or unidentified dots have stopped on the screen. If you’ve just bought one of these models and you’re thinking, don’t worry. In this article, we will tell you the reasons for these crashes, how you can get your data back, and how to fix the screens. The most common problem is Samsung’s sensor is not working. Let’s figure out how to fix it.

    The touch screen of the phone is completely unresponsive to touch. What to do?

    Let Your Phone Relax

    Samsung Galaxy touchscreen malfunction can be stopped by preventing overload. The phone tends to freeze if it is overloaded with work, unlike other phones, which quickly heat up or drain the battery. It just freezes. Most users mistakenly accept the solution to the touchscreen problem, while in reality most of the internal parts of the phone are deadlocked. This can happen if you have been playing games or filming videos for a very long time. Wait a while before using the phone again.

    Defective GPU. If you’re using your Galaxy for gaming, your graphics processing unit (GPU) may be stretched to its limits. To clear those dead pixels, you need to clear the RAM cache, close all running applications and restart your phone.

    Perform Hard Reset

    If you find that all the above steps do not fix the problem. Samsung sensor is not working, try performing a hard reset. It will remove all files and apps from your Galaxy and restore your phone to factory settings. Below are the steps to perform a hard reset:

    READ  How to View Browser History on Android Samsung

    Press the volume up, power and home buttons and hold until you see the Galaxy screen.

    Now leave the power button, but keep holding the other two buttons.

    Release the two buttons when you see the Android recovery screen.

    Use the volume up and down buttons to highlight options and the power button to select.

    Choose a factory reset which will erase everything from the device and then reboot the system.

    Remove SIM Card

    Shut down your Galaxy and remove the SIM card. Now re-insert the SIM after a few seconds, turn on the phone and see if anything has changed?

    Button Touch problem

    • Function button connector and charging connector. Now check.
    • If it still doesn’t work, check the charging connector if it’s problematic. Change it as there is nothing you can do in this case.

    The above steps will surely help you solve the touch screen problem from your Samsung Galaxy in the most efficient way. If your touchscreen is giving you problems, then your phone has become a complete krippler as you won’t be able to do anything on your phone (don’t even unlock your phone in any way).

    What to do if Samsung Galaxy won’t turn on?

    Everyone is used to the fact that the phone is always at hand. with it we always stay in touch and up to date. And at that moment, when it unexpectedly, for some unknown reason, does not turn on, a real catastrophe ensues. With today’s rhythm of life, even more so, to be left without the Internet and communication, even for a couple of hours, is like being left without hands! If such a nuisance did not affect Bosch and your Samsung Galaxy, the first thing to do is to try to remember under what circumstances it stopped working. If on the eve he seriously fell, got wet or overheated on the car’s torpedo, then one cannot do without the advice of a specialist and professional diagnostics. However, the problem is not always in the hardware of the smartphone. Sometimes you can try to cope on your own. With this we will just try to figure it out today.

    Prompt repair of Samsung Galaxy at the “X-Repair” service center

    If a full reset of Samsung Galaxy settings and other tips did not help, bring your phone to the X-Repair SC. Our masters will diagnose it for free and quickly figure out why the smartphone does not turn on. For this we have everything you need. equipment, tools and knowledge. We are waiting at the branches of our network, which you will find near the stations of the Moscow metro.

    What you can do at home if your Samsung Galaxy won’t turn on

    So, after making sure the phone hasn’t dropped or got wet lately, it’s time to consider other versions. There are not so many of them. without the help of a service center employee at home, you can check only three.

      1. The charger does not work. Perhaps the smartphone has completely sat down, and due to faulty charging, you simply cannot charge it. Therefore, try using a different device or connect your phone to your computer using USB. If Samsung turns on, the problem was with the charger.
      2. The charging socket is clogged. Few of the users think about the fact that the USB connector needs to be periodically cleaned of debris. The fact is that over time, dust, pellets, and lint collect in the charging socket. To remove the accumulated dirt, you need to turn the phone upside down and very carefully so as not to damage the contacts, clean it with a regular toothpick or tweezers. After the “procedure” put the phone on charge. If it doesn’t help, check the latest version.
      3. Errors of the software part. To test this version, it is recommended to perform a factory reset of the Galaxy (hard reset). But since the phone does not turn on, you will not be able to do this through the usual menu (Settings → Accounts → Backup and reset → Factory data reset). There is another way. you need to enter Recovery Mode. To do this, follow the instructions:
    • Simultaneously press and hold three keys: “Home” “Power” “Volume ⇧”. If your Galaxy does not have a Home button, press and hold only Power Volume ⇧.
    • After the inscription with the phone model appears on the display, release the “Power” button, while holding the remaining keys (for about 5-15 seconds) until the Android Recovery menu is displayed on the screen. If the menu still does not appear, repeat the previous steps again, but hold down the keys a little longer.
    • When the menu is highlighted, use the “Volume” key to select “Wipe data / factory reset” and confirm the selection with the “Power” key.
    • In order to select “Yes” (on some devices “Yes. Delete all user data”) press the “Volume” key, and then confirm your choice by pressing the “Power” button.
    • After all data has been deleted, the main menu is displayed. In order for the phone to reboot, in it, using the “Power” key, you need to select “Reboot system now”.

    If you reset the Samsung Galaxy to the factory settings, but the smartphone does not turn on, there is only one way out. contact the specialists for help.!

    You may also be interested in:

    If, for any reason, you need to disassemble your Samsung Galaxy S7 Edge, use the video tutorial from

    Samsung Galaxy A5 screen replacement (front glass is broken) 4000 Frequent breakdowns Samsung Galaxy A5 does not turn on

    Samsung Galaxy A3 screen replacement (front glass is broken) 4000 Frequent breakdowns Samsung Galaxy A3 does not turn on

    samsung, galaxy, phone, screen, turn

    Samsung Galaxy S6 screen replacement (front glass is broken) 7000 Frequent breakdowns of Samsung Galaxy S6 do not

    NNCXV.INFO 2021