Self-adhesive inkjet paper

Fixing the printout for decoupage

If there is no device with the required parameters at home, then you can contact the print center. Once the technical aspect is resolved, you need to get to work. Pre-prepared “dry” or “wet” paper is used. A thin brush is applied in 2-4 layers of acrylic varnish.

The subsequent steps are as follows. Wait 12-15 minutes, otherwise the silhouette will turn out to be “smeared”, and the napkin decorated with patterns and flowers will fade.

Once all layers of varnish have dried, carefully remove the top thin layer of paper. This should be done with a soft dish sponge. As soon as the layer has been “hooked”, it is unwound in the direction from the center to the edge. The process of template thinning ends with unhurried removal of the remaining pellets.

inkjet, paper

If no mistakes were made, then the decoupage masters suggest adhering to the following sequence:

  • In order for the chosen theme of nature, the central element of which is the rose, to seem natural, the base must be covered with a soil. For this, white acrylic paint or acrylic primer is used.
  • The application of a thin layer of PVA over the primer will help to avoid the appearance of age spots. After that, a piece of paper with the selected motifs is fixed on the surface to be decorated. For this, a file and a soft rag are used.
  • A high class of work is the ability to neatly delete a file after fixing a picture. Don’t be upset if it doesn’t work the first time. After that, you need to wait until the Christmas angels or the man’s car dries up.

The protruding edges of the paper must be carefully removed with sandpaper. The selection of the base and the future motive in such a way that the sheet completely covers the surface to be decorated will help to avoid many problems. This is done regardless of whether there will be only a treble clef and notes on paper, or we are talking about a more massive canvas.

How to make decoupage from a printed picture: recommendations for beginners

Increased attention is paid not only to the issue of preparing paper and finding the necessary pattern, but also to the printing itself. Regardless of the skill level, 2-3 copies of the selected image are always made. Even for a professional, the work may not work out, so it is recommended to always have a duplicate on hand.

It all starts with checking a laser printer, which is superior in many respects to its inkjet counterpart:

  • The number of possible print colors;
  • The maximum density level (dpi) that the device can transmit;
  • Print speed;
  • Requirements for paper weight.
READ  How to flush the epson inkjet printer head

Picture parameters for decoupage for printing on a printer

It is recommended to give preference to a color or black-and-white picture, the size of which is at least 1920×1020. In addition, attention should be paid to the details listed below. Make sure that the image of the bride and groom, which is transferred to the paper, is really made in good resolution.

Often there are pictures artificially enlarged several times. As a result, the quality of the printed job is poor.

Another emphasis should be placed on a number of additional factors:

  • Before printing a high-resolution media file, you should view it at maximum magnification. You need to search for “squares” and smeared areas. All this suggests that the color density (dpi) is poor. In such a case, it is recommended to find another option.
  • The process of preparing the image is completed by checking its size. The larger it is, the more significant its weight in megabytes. There is a little trick here. To get an excellent result, the middle file is selected. In this case, no part of the picture will seem too saturated due to the excessive concentration of ink.

Features of choosing a picture for decoupage

Having dealt with the technical side of the issue, you can proceed to the practical stage of implementation. When you have a clear idea of ​​what decoupage pattern you plan to transfer to the sheet in your head, you should find it on the net. Here it is immediately necessary to make a reservation. Regardless of whether it is planned to make a French city of the Romantic era or a portrait, all images are selected in the highest possible resolution.

  • Click on the “images” tab;
  • Choose “size“;
  • Set “wallpaper”.

In this case, all images displayed in the search results will contain several indicators. Color density measured in dpi (dots per unit area) and size.

Printouts: pictures for decoupage on an inkjet printer

Special skills and abilities are not required here, so even a beginner will find it easy to cope with the work. Depending on the end goal, it will help to prepare the basis for the work “wet” and “dry” method.

In the first case, you will need to take a small basin of cold water. Paper is alternately lowered into it for future printing on the printer. The maximum duration of water procedures is 5-10 minutes. After that, the sheet is removed and sent to drying.

In addition to the requirement associated with the time factor, it is advisable to comply with a few more recommendations:

  • You can choose a hair dryer for drying, but you must use it with great care;
  • The duration of one procedure is 2-3 minutes;
  • The heat source is located at a distance of 15-20 cm.
READ  Printer Can't See Network Cable

Before turning on, you need to make sure that the hair dryer will work at minimum speed.

Drying rules for decoupage pictures

During drying, it is necessary to check the level of humidity, if the leaf will dry on the balcony. A master of arts and crafts will not go to extremes. Too much moisture will provoke rapid decomposition of the cellulose structure, so the paper will become unusable. The same will happen if the room is too dry.

There are a few more nuances:

  • Excessively dry or damp paper makes printing on an inkjet printer impossible;
  • To implement the “dry” method, you will need transparent stationery tape.

With its help, you need to carefully remove the top layer of printer paper.

Decoupage from a printer print

Which paper is best for an inkjet printer

In the conditions of modern realities, devices for printing. printers. have long turned from luxury into a necessity. Only with their help it is possible in a short time to get a printout of text information typed on a computer. Copies of images on various types of media are also obtained by printing them.

Paper is used as the media on which the printed information will be displayed. If people approach the issue of choosing such a device seriously enough, then many do not even think about which paper is better to use, and how its properties affect the final result. And completely in vain. After all, characteristics such as paper texture and composition directly affect print quality.

What you should pay attention to

Based on the characteristics listed above, you will need paper of the appropriate quality to print with an inkjet printer. Otherwise, this may entail not only poor image quality, but also technical malfunctions in the operation of the device itself. Therefore, the choice should be approached responsibly.

First, you need to pay attention to the density of the paper sheets. this figure should be equal to 80-90 g / m 2. To the touch, this density will be medium. not too soft and not very hard. Also, the density directly depends on the transparency of the paper, since the thinner the sheet, the more it shines through. For frequent double-sided printing, thin paper is definitely not suitable, since the text of one side will shine through on the other, and it will not be very convenient to read.

Secondly, the sheet should be checked for roughness. Good quality paper is characterized by a sufficiently flat surface so that toner does not rub off or crumble on it. As for humidity, this indicator should not exceed 4.5%, since otherwise the sheets will curl and you will have to reprint the entire fragment.

Electrical conductivity of sheets. Another important factor in determining the choice for an inkjet printer. If this figure is too high, the quality of the images suffers, they are quickly erased from the paper. Plus, such sheets have the unpleasant property of sticking to each other during printing, if several of them were inserted at once.

READ  How To Delete A Print Queue On A Printer

Last but not least, you need to look at the finish of the paper. The edges of the sheets should not contain a single defect, not to mention such unpleasant and detrimental details as paper dust and other clues, the ingress of which into the printer can lead to difficulties in its operation.

Key Features of Printing Paper

The most modern printers allow you to use even plain office paper of far from the best quality. So, laser or LED devices during operation completely exclude paper getting wet. However, in the case of an inkjet printer loaded with office paper, things are not so good. The fact is that excess ink accumulates around the printer head, and the sheets are soaked with it. The result of such a process is unlikely to be liked by anyone. the ink eats into the paper so that it creates the effect of being covered with some kind of cobweb.

That is why inkjet paper and paper for a different purpose are different things. In order for an inkjet printer to give a high quality image without visible defects, paper for it is manufactured using high-tech chemical processes. The complexity of the process in this case is due to the desire to provide each sheet with such a degree of ability to absorb ink so as not to allow ink smudges during the printing stage. Hence the need to provide such paper with better characteristics of smoothness, density and brightness in comparison with similar products for laser devices.

There are three main indicators by which the quality of the paper and its suitability for use in printing are determined:

  • the degree of ink absorption;
  • density;
  • brightness.

Manufacturers are guided by the same criteria, because it is much more profitable for them to produce separate options for inkjet and laser devices than universal types. So, for example, on the packaging of paper for an inkjet device you can often see the inscription “Inkjet”. the density and format of the sheets contained in different packages with this inscription may differ, but from it you can immediately guess the intended purpose.

Depending on the type of coating, the following types of sheets for inkjet printers are distinguished:

Thus, choosing the right paper to use as substrate for inkjet printing is not such a difficult task. The main thing here is to approach its choice as responsibly as in the case of the printing device itself. And then the quality of the resulting images and work without failures and malfunctions will be practically guaranteed.