Sensor does not work on iPad what to do

Table of Contents

Broken Android Data Extraction

iSkysoft has developed a program that allows you to save or restore the necessary information from broken phones. To do this, install the Android Data Extraction application on your computer and follow the instructions.

How to save data when the display is not working

If the smartphone screen stops working completely and you want to keep the files on the phone, you will have to use a regular PC and a special program.

Calibrating the display with third-party programs

The Play Market has applications that can be used to calibrate the touchscreen to improve its performance. It will take too long to review all applications, so we will focus on one of them that received the highest score from users.

Hard reset

This is a full factory reset of the device.

  • go to the “Settings” section;
  • select “Restore, reset”;
  • find “Factory data reset”.

Before you reset your phone to factory settings, be sure to back up any important data stored on your device.

Reboot

If the sensor does not work partially, download the Rebooter app, which will help you quickly reboot your device. If the sensor is completely unresponsive, and the smartphone has a removable battery, just remove the battery for a couple of minutes.

Devices that have a non-removable battery installed should be treated slightly differently.

Owners of Xiaomi, Meizu or Digma devices can hold the on / off button for 20 seconds or longer and the smartphone will restart or shut down. If you have a Samsung or Sony, press and hold the Power / Lock and Volume buttons at the same time for 7-10 seconds. If that doesn’t work the first time, try again, but hold down the buttons longer. Other brands with a built-in battery should also try the above options.

If pressing the buttons did not give any result, wait until the battery is completely discharged and take the device for repair.

Dry after getting wet

If your smartphone gets wet, follow these instructions:

  • turn off the power;
  • remove the battery (for devices with a removable battery);
  • remove the SIM card and USB flash drive;
  • wipe the device with paper towels or a cloth that absorbs moisture well;
  • remove headphones, cases, film or glass from the screen;
  • place your smartphone in a bag filled with rice. Leave the device in this position for 12 hours. During this time, the cereal will draw out all the liquid from the phone.

If the procedure with rice does not give the desired effect, contact the service center.

TouchScreenRepair

This Android app does two things:

  • conducts testing and issues a report on which fragments are not used, why the accuracy is low and the screen sensitivity is lame;
  • fixes bugs in automatic mode.

The application has an additional function. it allows you to change the screen orientations. You can select the area, when pressed, the response will occur in another part of the display.

Sensor replacement

If your smartphone does not use OGS technology, you can try to replace the sensor yourself. To do this, you will need the following tools and accessories:

  • a set of small curly screwdrivers (available for sale specifically for smartphones);
  • pick, spatula, plastic card;
  • silicone suction cup with ring or loop;
  • regular hair dryer;
  • glue B-7000 or similar;
  • thin rubber gloves.
  • Disassemble your smartphone.
  • Warm up the display with a hairdryer around the entire perimeter to a temperature of about 70-80 degrees. Pick up the heated screen with a suction cup, and pulling it away from the case.
  • Install a new sensor. Prepare it by removing the protective film from the inside. Apply a thin layer of glue over the entire seating surface. Replace the sensor and press down gently. You can put a small and flat object weighing no more than 300 g on top of the screen for better adhesion.
  • You can collect the phone. Connect the loops, fix the internal threaded connections and install the external housing parts.

If you are not sure that you can handle the replacement of the sensor yourself, take your phone to a service center. If you repair the device yourself, the smartphone warranty expires.

The main reasons for sensor freezing

often than not, the touchscreen stops responding to finger touches due to system glitches. The most common reasons are:

  • presence of malicious files on iPad
  • software problems
  • Jailbreak is incorrectly installed
  • some applications do not work correctly

Any of these reasons can lead to problems with the touchscreen of the device. If the iPad screen does not respond to touch due to hardware problems, then professional repair and replacement of defective parts is required.

Apple representatives recommend not downloading applications, programs and games from unverified sources to iPad, because this can lead to the system freezing and the screen responding poorly to finger presses.

Hard reboot stages

Hard restarting the iPad will clear RAM and refresh all processes. This method will not do any harm to either the motherboard or microcircuits.

To completely restart your iPad, follow these steps:

  • unlock device
  • hold down the Power and Home button for 10 seconds
  • release the buttons at the same time after the logo appears

This shutdown is suitable for any model of Apple tablets.

If after restarting your device still does not unlock or the touch glass still does not work well, try updating the software.

  • turn on iTunes
  • connect tablet to laptop
  • select your device in iTunes
  • select the category “Browse” and click on the “Update” tab

Apple products are designed to update software over the air. To do this, put the gadget on charge, connect to the Internet and in the main settings select the category “Software update”.

If after that the touchscreen does not work well, does not unlock, or the tablet does not turn on at all, then the motherboard, microcircuits are faulty, or the display module is damaged.

Ways to restore a gadget

If the reason that the touchscreen does not work is an application freeze or a software malfunction, then you can restore the operation of the device yourself.

Effective and safe self-repair methods:

  • force close all active applications
  • hard reset device
  • cleaning screens
  • 3D touch setting
  • software recovery

Sometimes the iPad touchscreen does not work due to severe dirt on the display. Before rebooting the device or taking it to a service center, carefully clean the glass from dust and dirt.

Also, the reason why the tablet stopped responding to finger presses may be strong cooling or overheating of the device. To get the gadget to work, leave the tablet turned off at room temperature for 20 minutes.

iPad does not respond to touch

If the iPad’s screen isn’t responding to touch, you may not need to replace the touchscreen. The cause of the failure may be a device freeze or some applications not working correctly. To determine why the sensor is not working properly, perform the primary diagnostics of the gadget at home.

If, after examining the iPad, you find that the screen is damaged or there are scratches on the tablet case, then you should contact qualified specialists. Mechanical damage to Apple technology can lead to malfunction of internal components. In such cases, experienced craftsmen will be able to find out exactly why the screen does not respond.

Professional repair from Yudu performers

Only qualified specialists can accurately and efficiently eliminate hardware problems. Experienced craftsmen are registered on the YouDo website, who, taking into account the technical parameters of the model, will eliminate any malfunction of the screens. Yudu professionals will determine exactly why the gadget stopped responding to clicks, after which they will quickly repair the iPad touchscreen display in accordance with the manufacturer’s recommendations.

If the iPad screen does not respond to touch, contact the Yuda performers, they guarantee the urgency and high quality of work.

IPhone or iPad screen “glitches”. why is it pressed by itself?

Greetings to everyone and everything! I didn’t want to write the title of the article that way, but it’s very difficult to find a word other than “buggy”. It is very capacious (the mighty Russian language is rich and beautiful!) It describes all possible problems with a screen that lives by itself. keyboard buttons are pressed, desktops are scrolled, applications are launched, and all this without your knowledge. And the display itself does not respond to pressing!

It would seem that the situation is fantastic and somewhere even mystical, but in fact, there is nothing strange about it. everything has a logical explanation. Which one? We’ll find out now! But first, let’s decide after what actions the screen of your iPhone or iPad can begin to live its own life, create chaos, run wild and frighten its owner.

  • Firmware upgrade.
  • Physical damage (fall, shock, moisture).
  • Display replacement or repair (nuances are possible).

That’s all. Although no, there is another option. none of the above happened, and the screen suddenly began to “glitch”.

Let’s start with the general preparation of the device, which will help eliminate some of the standard moments due to which the touchscreen behaves in such an incomprehensible way:

  • If there is film or glass adhered to the device, remove them.
  • Wipe the screen thoroughly with a soft cloth. Do not use special cleaning fluids, sometimes they can just ruin the oleophobic coating.
  • To rule out a software problem and errors in iOS, do a hard restart of the device.
READ  What connector does Samsung a51 have

Yes, everything listed above is quite commonplace, but it can help. However, these are far from all the actions that can be performed in order to adjust the operation of the display.

And the first thing worth paying attention to are non-original power supplies and Lighting wires. Although, rather, it will still be about wires (the adapter itself, as a rule, does not greatly affect the operation of the device). Here they are. yes, they can ruin your nerves.

Once I myself ran into this and saw how a person’s phone was charged and at the same time periodically lit up, the screen was unlocked, pressed by itself, characters were typed on the keyboard. To be honest, I was very surprised how the iPhone has not yet called somewhere on its own.!?

After a short conversation, it turned out that although this annoys a person, he simply does not want to buy an original wire (I rarely use it, and it will do!). The fact that spontaneous pressing of the display is not the worst thing that can happen, and the battery will definitely have to be changed soon, he was not interested.

Conclusion one: if the iPhone display lives its own life and does not respond to pressing only during charging, the charger is most likely to blame. Change and use only certified accessories.

If everything is ok with the charger, then it is worth moving on to the next reason. these are low-quality display modules. There are just a huge number of them, but there is an explanation for this:

  • Many models are just wildly popular, for example, the iPhone 5S.
  • Original displays are not officially brought to Russia.
  • China will help everyone.

Here is a large number of screens of varying degrees of quality. over, they can be installed both during the repair and on “new” (in fact, restored, it is not clear where) iPhone. And if you are unlucky, and the screen is set completely “left”, then accidental clicks and other joys of life are provided.

By the way, a characteristic feature of this defect is that after blocking / unlocking the device, everything returns to normal, but for a while, and then starts to “glitch” again. This can manifest itself both immediately after repair / replacement, and after an iOS update. What to do in this case? There are two options:

  • Set normal display.
  • Try to glue film or glass.

The most interesting thing is that some workshops, knowing the quality of the display they install, when replacing the module, “as a gift” stick a sticker on the screen. Often this is done just so that the iPhone or iPad display behaves correctly and does not live its own life. Brilliant move! The difference between a good screen and a bad screen is big, and the price of film is small. And everyone is happy: the client thinks that the service is good. he even glued the film, and the workshop itself won in money.

Conclusion two: if the iPhone display is “buggy”, most likely it is simply not very good quality. Replacement required. There is also a more budgetary solution that helps many. a film (glass) sticker. With the iPad, the situation is completely similar, only it is harder to glue 🙂

There is another reason the touchscreen can behave strangely. But here it would be more correct to say that it will not handle pressing at all, and not “just” work in the wrong place.

Perhaps we are talking about the display sensor controller and this is very sad. It can be damaged in the event of a fall, shock, moisture ingress inside the gadget and the lack of timely action to remove this very liquid.

Only a few service centers have the skill of re-soldering it (the procedure is done in order not to change the entire motherboard as a whole). Well, it also costs money, respectively. of course, cheaper than a complete replacement of the board, but still

Conclusion three: the most serious malfunction in which the iPhone display is pressed by itself is a breakdown of the screen sensor controller. Compared to previous problems, this is rare and much harder to fix.

Here is such an unpleasant conclusion at the end of the article However, I really hope that all the “glitches” of your iPhone screen will be cured by an elementary replacement of the charger, wire, or, in extreme cases, with a sticker of film or glass. And it will not come to complex repairs in the service center. Let it be so!

Typical touchscreen faults

Mechanical damage most often leads to various breakdowns. Falls and deformations are a kind of record holders of a widespread excuse: “I didn’t do anything, I just rode in a crowded minibus” ”or“ It’s not my fault that it’s so slippery ”. The consequences of a blow and undue pressure on the apparatus can be different. From an innocent chip on the case lid to the spider-like pattern of a split display. The case may “tolerate”, but the touchscreen and screen will need to be replaced. If the sensor on the phone does not work, you should pay special attention to the structural parts of the mobile phone. In the case when the body part of the device moves away from the touchscreen and you visually see the gap formed or find that the control panel has moved, you need to install the parts in place. Sometimes a smartphone loses its sensory performance due to a small amount of liquid trapped inside the gadget. And often you do not even know how the water ends up in the bowels of the device. Although you should know that the condensate will pick up the most unfavorable moment in order to show its destructive abilities. Check the pads and sockets of the connectors for oxidation. Physical defects: screen flickering, image distortion and other non-standard manifestations in the phone’s operation may indicate that the device needs urgent repair. Delay and delay with professional help is not in your best interest

Oxide elimination and touch panel positioning

Arm yourself with a special (mobile) tool: a Phillips and flat screwdrivers, an unnecessary plastic card (bank or other type). Prepare rubbing alcohol, a clean toothbrush, eraser, and regular table napkins.

  • Before disassembling the device, watch the video on disassembling the phone. To do this, it is enough to register the model of your device in the search engine and add disassembly / assembly.
  • Be careful when separating parts of the case, there is a high risk of tearing the connecting elements of the device: loops, wires, antenna and other attached parts.
  • Draw a diagram of your device and lay out the screws according to the drawn drawing.

Why did the sensor stop working??

There can be an incredible number of reasons. Despite the high adaptability of the touchscreen, in most cases it is a fragile and rather “finicky” control element. The functional abilities of such a modern “miracle” are completely dependent on a variety of influencing factors:

  • weather conditions,
  • mechanical damage,
  • ingress of conductive liquid.

A software failure, spontaneous system failure can also be the culprit for the fact that the sensor on the phone does not work. Of course, all these shortcomings are conditional, because it is the human factor that plays the main role in the life of the used mobile device. Specifically, the performance of the device and its efficiency in operation depend on our actions.

What You Can Do: On your own doesn’t mean counterproductive.

If the sensor on the phone does not work well, first of all, calibrate the touchscreen. Usually this function is available in the main window of your device’s settings. Such actions are carried out when the device is clearly working, when the body is intact, no traces of deformation or oxidation were found, and the sensor reflects the glare of light with an impeccably smooth surface. If the forecasts are not entirely rosy, you will have to transform into a mobile device repair engineer. Since the subsequent actions require certain skills and specific knowledge.

How to fix it: the sensor is not working on the phone

Push-button mobile phones have been replaced by ergonomic touch-sensitive devices. What has changed with the new technology? Almost everything related to management functionality. Therefore, a tricky situation when the sensor on the phone does not work requires immediate permission. over, in some cases, the user has every chance to make repairs on his own. However, we read about this and many other things below.

In case of a favorable outcome of all your manipulations, your touchscreen should work. If everything remains unchanged and the sensor on the phone also does not work, then only replacing this component of the control system will help you. What is not recommended at home. Therefore, you cannot avoid a visit to the workshop. Protect your sensor!

How long will it take?

Most often, replacing the display on an iPhone of any generation takes approximately one hour. There may be slight variations in both directions, but usually within an hour. One should not think that such a short term of work means their poor quality.

What to do and how to turn off iPhone if sensor is not working?

Let’s imagine the following situation. Let’s say that the touchscreen of your device still functions, albeit with a lot of errors and inaccuracies. In this case, we can solve this problem quite simply. To do this, we perform a full reboot of the smartphone. To do this, follow these simple instructions. The first step is to pinch two buttons at once. This is the power button, as well as the key that is called “Desktop” or “Home”. In this state, they need to be held for about twenty seconds. After this time, the device should restart. At the end, you will see the corporate logo of the American company, which will notify you that it has performed the reboot operation correctly. By the way, this instruction is one of the answers to the question of how to restart the iPhone if the sensor does not work.

Check accessories

There are times when they interfere with the correct operation of the touchscreen. For example, if a screen protector was incorrectly applied, it can do its part. In addition, there are now a huge number of undeniably cool smartphone bumpers on the market, but not all of them are soundly made. If the bumper partially covers the display, it may interfere with normal operation. To check if this is the reason, you just need to remove it from the device and again use the touchscreen a little. If normal operation is restored, the problem is really in the bumper, and something will have to be done about it. If nothing has changed at all, then you need to go further and look for the reason for the incorrect functioning.

Why a service center?

If your sensor does not work on the iPhone 5S or another device of this American company, specialists with relevant experience will always be able to first recognize and identify the cause of the malfunction, and then localize and eradicate it. In the service center, you can find out the state of the phone. If required, specialists will replace the screen on the device for a fee.

READ  Apple is on on iPad and won't turn on

Manifestations

What signs clearly indicate that we have problems with the sensor module of the device? Probably, first of all, this should include the lack of response to touch in one or another area of ​​the screen. Secondarily, the touch delay is also included here, although in fact the response is still present.

A manifestation of the fact that the sensor does not work on the iPhone can be a complete ignorance of all touches to the screen. The display simply refuses to process them. By the way, when problems arise with the touchscreen, it becomes a real source of problems for beginners who are just getting acquainted with the “apple” technology. So they start looking for how to turn off the iPhone if the sensor does not work. Another sign that clearly indicates the need for sensor repair is the arbitrary life of the device. That is, it itself can type a sequence of characters, applications are opened and closed in the same way, and documents are scrolled by themselves. A bit creepy when you think about horror movies.

Previous tips didn’t help?

The answer to the question of how to restart an iPhone if the sensor does not work is quite simple. To do this, you need to use the appropriate key combination. Well, what to do next if the advice on restarting the device did not help? What if the sensor continues to work incorrectly, or even does not respond to touches at all? In this case, everything is much more serious, and we are not dealing with a single failure, which, in fact, is just an exception to the rule, but with a technical malfunction.

In this case, as soon as possible, you need to plan and carry out a visit to the service center, where specialists will examine the screen and, if possible, return it to normal life. Don’t be tormented by the question “The sensor does not work on the iPhone, what should I do?” When even a complete reboot does not help. Here we are talking about the fact that you need to act as quickly as possible so as not to aggravate the situation.

Causes

Most often, the reasons due to which the sensor does not work on the iPhone are mechanical in nature. It is clear that in this case some object must act on the display. No wonder they say that it is better for your device to purchase a protective glass immediately after purchase and install it. If this is not provided, then be sure to stick a protective film. Without additional protection, when dropped from a great height, the touchscreen of a fifth-generation iPhone, for example, stops working 98 percent of the time. Nevertheless, it is not excluded if the sensor does not work on the iPhone, the software reason. That is, a failure inside the operating system.

IPhone sensor not working: what to do?

The products of the American company “Apple” are of high quality. It fully justifies the at which the manufacturer offers its devices on the market. However, iPhone owners often face problems associated with a broken screen. Of course, a hail of questions immediately rains about what to do if the sensor does not work on the iPhone, or, as it is called otherwise, the touchscreen. Initially, we note that the display can either fail completely, or stop performing its functions in part.

Reason 2. Water inside the case

If, after walking in the rain, you find that the sensor on the phone does not work, most likely water has got inside the case. You can often notice that the sensor stopped responding to touch after the smartphone was held in wet hands for a while.

Cause 1. Dirty display

If the touchscreen surface is not coated with an oleophobic coating, the display will become greasy over time, which interferes with the transmission of electrostatic signals from your fingers. In the best case, the sensor is triggered once, in the worst case, it does not react at all to the user’s touch.

Decision

Restarting the phone usually helps. It is also recommended to wait a few minutes after that for the temperature inside the gadget to return to normal.

Decision

Careful cleaning of the contacts will help, preferably in a repair shop.

Decision

If the sensor on your phone does not work due to a software error, try restarting your smartphone. If this does not help, the most reliable way to restore the sensor’s performance is to take the smartphone to a service center. Of course, the system glitch can be fixed by flashing the phone. However, it should be remembered that this procedure entails even more serious disruptions in the operation of the smartphone and the automatic withdrawal of the gadget from service.

Reason 7. Failure of the matrix loop

A smartphone screen, as a rule, is a kind of sandwich of several layers. The touch panel is placed on top of the matrix, which is attached to the phone board with a ribbon cable. After the gadget falls on a hard surface, very often the screen does not receive external damage, but the sensor does not work. In this case, it means that the cable has broken or has come off.

Reason 8. Software malfunctions

Even the latest version of the Android operating system is not immune to software bugs. As a result of a system failure, the screen is on, but does not respond to user touches.

IPad sensor / touchscreen not working

Despite the fact that tablets from Apple are very high quality products, their users often face such a problem as a non-working sensor / touchscreen. It may fail completely or not work partially. One way or another, this will cause a lot of inconvenience to the owner.

Why the sensor / touchscreen on iРad (iPad) may not work. What to do?

As you can see, there may be several reasons why the sensor / touchscreen on the iPad (iPad) does not work, so we recommend not trying to repair the device yourself. If you do not have the necessary skills and experience, please contact our organization “Apple-SAPPHIRE”. Our specialists will be able to make an accurate “diagnosis” of the device and carry out competent repairs with less spending of your time.

The sensor / touchscreen does not work on the iRad (iPad). Manifestations:

What to do if the touchscreen / sensor does not work on the iPad:

If the sensor is constantly malfunctioning (the touchscreen works, but with malfunctions and errors), it is worth rebooting the tablet. This can be done as follows:

  • simultaneously hold down the buttons “Home” and “Power on”;
  • hold them in this state for about 20 seconds;
  • the device will reboot;
  • if the Apple logo appears on the tablet screen, everything was done correctly.

If a protective film or a cool bumper is glued to the display of the gadget, try to remove them and test the operation of the touchscreen. It is possible that the screen will start working again, and the reason for the breakdown was the use of such accessories.

If the owner has done all of the above, but the screen has not been “reanimated”, then perhaps you should think about a visit to the “Apple-SAPPHIRE” workshop. The service center specialists will not only be able to assess the condition of the tablet, but also find out the cause of the problem.

As for the display replacement period, it will take no more than an hour. over, fast execution will absolutely not affect the quality of work. And all because we have original details and rich experience (we are contacted with a similar problem every day).

Sometimes the screen may stop working due to damage or deformation of the system board. Such a malfunction requires a complex and lengthy recovery. After all, the solution of serious problems, like the diagnosis itself, lasts much longer than the usual replacement of the sensor.

Please note that all tablet computers from the 4th to the 6th generation are equipped with a touch glass integrated into the display module. over, the module itself consists of 3 elements. a protective (top glass), a touchscreen and the display itself. Therefore, if the sensor stops responding to touch, you will have to change not only it, but the entire module.

Replacing the screen (sensor) in the iPad Air

Despite the fact that the tablet screen is made according to modern technologies, it can be damaged as before: impacts on a hard surface. In this case, they apply when physical damage is noticeable (chips, cracks, colored spots, stripes, picture distortions appeared), or in the presence of implicit damage. part of the screen does not work, the sensor does not respond to touches and others.

Our for iPad Air repair

Service Cost, rub.
IPad Air touchscreen replacement (screen sensor) 2650
Replacing the iPad Air display (screen) 6450
iPad Air won’t boot, won’t start 1000
IPad Air firmware, software recovery 1100
iPad Air won’t turn on (won’t turn off) from 1300
Repair of buttons from 1600
IPad Air sensor not working (touchscreen) 2650
iPad Air won’t charge from 1600
Water, moisture, liquid got in from 1600
iPad Air not working! Any breakdown call!
IPad Air Board Repair from 1800
Replacing loops 1900
iPad Air cannot see SIM (SIM) card from 1600
Power controller 3500
iPad Air won’t connect to Wi-Fi from 1800
The camera does not work, does not take pictures 2000
iPad Air won’t load 1100
Doesn’t connect to iTunes from 1100
Other types of services negotiable
IPad Air Diagnostics IS FREE

iPad Air won’t turn on

This breakdown can be caused both by a physical factor (shock, moisture ingress, breakdown of any of the components), and by software. That is why our engineers carry out preliminary diagnostics, which will indicate the time and cost of the repair.

There are times when the iPad Air won’t turn on due to a lack of battery power. A broken charger is often the cause. Therefore, you can first check your charging for work, and then bring your iPad Air to service for service.

Unlocking iPad Air

If the tablet was purchased under a contract with a telecom operator, then it will be tied to the SIM card of this operator. After completing the unlock, you can use SIM cards of any operator of any country. This procedure takes several days, depending on the operator to which your tablet was linked.

iPad Air freezes or restarts

The reason your iPad Air freezes can be due to physical damage or a software glitch. If any of the internal components of the tablet is damaged, then it may not work stably, which leads to freezes.

However, more often than not, the reason your iPad Air freezes or restarts is a software issue. There may be “bugs” like in iOS (for example, in fresh versions that have not yet received “patches”), or installed applications / programs. If you do not know how to independently find the cause of this breakdown. please contact our service center. If iPad Air freezes on an apple, reboots itself, glitches during operation. in “Smart Center” will help in solving the problem.

READ  The Printer Does Not Print Well In Black

IPad Air Repair

Here you will find information on for iPad Air repairs at the “Smart Center” service center. Our workshops are located in St. Petersburg. In cases of replacement of damaged components, we will install the original new one. There is also a 30-day warranty to repair your iPad Air.

Sensor stops working on iPhone, what to do?

If your sensor stops working, the reasons are different. But most likely the upgrade to iOS 11/12 is calling. In addition, software failure, overheating of the iPhone, contamination of the display, also lead to various breakdowns. The following situations are listed:

2 WAYS TO FIX IPAD TOUCHSCREEN NOT RESPONDING. WORKING

  • The sensor stops working after a while
  • Sensor stops working after screen lock
  • Sensor stops working after 10 seconds
  • The sensor on the phone does not work after a fall
  • The sensor on the phone does not work after water
  • The sensor stops working in cold weather

And when the aforementioned appearances arise, they should be corrected. If, after a fall and water, the screen does not respond or is broken, then it is necessary to change to a new sensor at the service center, and in advance to extract the data on the device from the iTunes and iCloud backup, avoiding the loss of files. In other cases, system crash or breakdown, Tenorshare ReiBoot is recommended, will allow you to fix for free that the touch screen does not respond to touch.

How to restart the phone if the sensor does not work

iPhone 5s sensor stopped working, and then the screen turns black, in this case, how to restart iPhone? A quick and easy way is to force a reload. Press and hold the Power button and the volume down button on the left for 15-20 seconds, after which the Apple logo will appear on the screen.

What to do if the sensor does not respond to touch

The free Tenorshare ReiBoot app is a professional utility capable of entering and exiting recovery mode. And entering and exiting recovery mode can eliminate most of the freezes.

Download and Install Tenorshare ReiBoot, Connect iPhone, iPad and iPod to Computer.

Click “Enter recovery mode”, and enter the device into recovery mode,

Click “Exit recovery mode”, and take the device out of recovery mode.

How to reanimate a sensor on a phone

A forced restart of the device does not work on its own, but you can try to restore the system using Tenorshare ReiBoot.

Launch Tenorshare ReiBoot, after connecting the gadget to your computer, click “Fix Now”.

First download the firmware by holding “Next”.

After downloading, start recovering, and wait a bit, recovery is successful.

If it was not possible to restore the iOS system, then change the download path and try again. If the sensor still does not respond well to touch, then contact the service center. The reason may be that something unpleasant happened to the hardware.

Repair of a faulty iPhone sensor at the “X-Repair” service center

You removed the protective film and rebooted the device, but the sensor on the iPhone still doesn’t work? Here you cannot do without the help of specialists. If the display module of the smartphone is intact and serviceable, the reason for the failure of the sensor of your device is damage to the motherboard. Certified employees of the “X-Repair” service center will quickly and efficiently repair the iPhone at the best price. Branches of our network are conveniently located within walking distance from the metro stations of the capital (see on the map). If you do not have time or opportunity to bring your device to us, use the courier delivery service.

Why does the sensor not work on the iPhone?

There are many reasons why the sensor does not work on the iPhone. The touchscreen iPhone may stop working due to a factory defect in the touchscreen, a fall from a height, or a shock. However, in addition to damage to the display module, a common reason why the iРhone sensor stopped working is a malfunction of the motherboard. Damage to the device board can be either a shock or a fall on a hard surface, or moisture ingress into the smartphone case, which will lead to corrosion of the conductive elements of microcircuits.

But most often, the malfunctions of the touchscreen, regardless of the iPhone model, are caused by mechanical damage due to the failure of the smartphone owner to follow the basic rules of operation and banal inaccuracy. This leads to the fact that as a result of falls, the microcircuits that are responsible for the operation of the iPhone sensor are damaged and the touchscreen begins to work intermittently. In order to find out the exact reason why the sensor on the iPhone does not work, you need a specialist consultation and smartphone diagnostics. If the problem with the sensor of the device is not in the display module, then the iPhone motherboard needs to be repaired. The specialists of the X-Repair service center will promptly repair your iPhone at the best price.

What to do if the iPhone sensor does not work

Apple products are renowned for their quality throughout the world. However, despite the excellent build and high-quality components, all iPhone models have their weak points. Gadget owners often complain that the touchscreen does not work in their iPhone. In this article, you will learn why this happens and what to do if the sensor does not work on the iPhone.

How iPhone sensor problems manifest:

  • There is absolutely no reaction of the iPhone touchscreen to touches;
  • There is no sensor response in some areas of the display;
  • The response of the sensor to the command is delayed;
  • The touchscreen of the smartphone does not respond to all user commands;
  • The iPhone’s sensor triggers randomly. the device itself opens and closes applications or documents, types text without user intervention, etc.

Our network of service centers where you can get your iPhone sensor repaired

What to do if the touchscreen does not work on iPhone?

If the sensor on your iPhone stops working, you do not need to panic, use our tips:

If your iPhone has a screen protector (glass), remove it and wipe the screen with a tissue. Perhaps the reason for the incorrect operation of the touchscreen is in the not neatly glued protective film (glass) or in the ingress of air bubbles, small debris or dust under it.

Restart your smartphone by simultaneously holding down the Home and Power buttons for 15-20 seconds.

If the tips above did not help and the iPhone sensor still does not start working properly, contact a professional. Experienced masters of the X-Repair service center will carry out free diagnostics of the gadget to determine the reasons for the breakdown, for which the sensor does not work in the iPhone. If the problems with the touchscreen of the smartphone are not in the display module, the iPhone motherboard needs to be repaired, which will be done at the “X-Repair” SC at the best price.

You may also be interested in:

If, as a result of a fall or deformation of the case, the glass in the iPhone 6 begins to move away from the plastic

During daily use of a mobile phone, situations often arise that can lead to its breakdown. For instance,…

If you want to set a four-digit password instead of a six-digit password on your iPhone, use our simple instruction.

Stylish, technological iPhone from Apple differs not only in its quality, functionality and thoughtfulness, but also

What to do if the sensor is not working on iPhone

If the iPhone owner notices that the image on the phone’s display suddenly begins to display with interference, the sensor stops responding to touch, and tactile commands are sent and executed spontaneously, he usually thinks that the problem will be solved by replacing the display module. However, even after replacing the display, all these problems remain. How to solve them?

On iPhone 6 Plus, the sensor often does not work correctly

Why iPhone screen glitches

Sensor glitches, interference on the iPhone screen and other similar symptoms are typical for the iPhone touchscreen controller not working correctly. These symptoms include:

  • The sensor works every other time
  • Stripes appear on the screen
  • The phone lives “its own life”, the commands are executed independently

This issue is common on iPhone 5, iPhone 5s, iPhone 6, and iPhone 6 Plus. Before the iPhone 6s, these controllers were located on the motherboard: only then Apple began to place them on the display part.

Such stripes on the iPhone screen may indicate that the touchscreen controller is not working properly.

Why is it failing? Most often this happens due to the penetration of moisture into the case or mechanical impact on the phone. a small fall from the sofa is enough. The motherboard has a high density of BGA chips, so any physical contact can lead to disruption of their work. Falling or getting moisture into the phone can cause a violation of soldering, breakage of contact tracks and even damage to the microcircuit itself.

However, it happens that the problem arises after an unscrupulous repair. It is very easy to damage (overheat) the components of the iPhone board if you work carelessly. In any case, a qualified diagnosis is required to identify the exact cause.

Is there a problem in the controller or display? Only a specialist will understand

How to fix iPhone sensor problem

You can get rid of these inconveniences by replacing the iPhone touchscreen controller. At home, this will definitely not work. replacing the microcircuit located on the motherboard is a complex procedure that requires experience and skills. Therefore, we turned to the Apple Pro service center, which showed us the iPhone 6 Plus repair.

Touchscreen controller repair process

Since the touch controller in the iPhone 6 Plus is located on the inside of the motherboard, you need to almost completely disassemble the phone to access it. The battery and all cables are disconnected.

The display module is removed, all loops are disconnected

For safety (and convenience), the motherboard is removed from the iPhone and placed in a dedicated holding device.

Motherboard removed from iPhone

The engineer uses a hot air station and heating to remove the old controller. Since all the components on the motherboard are densely located (for example, on the back side there is a processor), the temperature regimes are observed very strictly. Overheating can cause problems with other microcircuits, which will require additional repair.

System board without touchscreen controller

The specialist cleans the contact pads and prepares the board for the installation of a new microcircuit.

Often the problem lies in the breakage of the contact tracks on the motherboard. Therefore, after dismantling the old touch controller microcircuit, the engineer begins to restore the breaks on the board. For recovery, he uses a circuit on a computer and special software.

Microcircuit in place, tests can be carried out

After repair, a seal is installed on the components. it is damaged by physical influences from the outside

NNCXV.INFO 2021