System ui not responding on Samsung phone

Method Removing SD Card

Some users claim that the SD card may be the cause of this problem. It may be damaged or simply have bad sectors that prevent the Android system from accessing the information it needs, which leads to an error. As it was found out, SD cards with 32 or more gigabytes are more susceptible to this problem.

To quickly check the likelihood of your SD card’s involvement in the “system application not responding” error, you simply need to physically remove it from your Android device and then reboot it. After doing this, let your smartphone work like this for a while. If there is no specified error, then the problem is obviously with your SD card.

However, even if she was the culprit of the situation, this is not a reason to get rid of her. Try to reformat the SD card completely and then put it back into your smartphone. Perhaps something on it was causing the error “The system application is not responding”.

Method Performing Miscellaneous Reboots

Android is not the most stable operating system, so from time to time some errors, crashes and other problems can appear in it. Perhaps the error “The system application is not responding” has occurred or some kind of failure in the system.

If this error was caused precisely by such a single failure, then a simple reboot of the device should easily fix the problem. First, try a simple reboot: hold down the power key on the device and confirm the shutdown.

Once your smartphone starts up, check for an error. If that doesn’t work, you can also try a harder reboot, which is done by physically disconnecting the battery.

Note: If you have an Android smartphone with a non-exhaustible battery, then you can perform a simulated battery outage. This is done differently for each device, but on most of them a forced reboot can be achieved using a combination of the Power and Volume buttons, which must be held down for 20 seconds.

How to fix the error “System application is not responding” on Android?

The system application is not responding. this is a common problem that can occur on absolutely any Android device. Devices from manufacturers such as Samsung and Alcatel, according to many users, are more susceptible to this problem than other devices on this operating system.

The error “System application is not responding” appears most often immediately after installing a new application on an Android device. Among other things, some users also note that this can happen after installing a third-party application, i.e. not from the Google Play Store, but using an APK file.

The “system application is not responding” error is a signal that some hardware part of your device or a component of the Android OS is not supplying the application with the required data.

Considering that there are many reasons for this error, there will be many solutions. Before we move on to the solutions part of the article, let’s go through the most likely reasons for the “system application not responding” error:

  • Software conflict
  • There is not enough space on the device
  • Broken sectors on the SD card
  • Malicious software installed from an unverified source
  • Unverified custom Android firmware (only on devices with ROOT access)
  • Important system elements were moved or deleted using Link2SD and another similar application (only on devices with ROOT access)

Ok, below you can find for yourself a list of methods that may be able to help you with the solution of the error “The system application is not responding” on Android.

Method to Reset Android Device to Factory Settings

If none of the above helped you, then you can resort to the last method. resetting the device to factory settings. If you have not done anything with the system files, then this method almost exactly eliminates the error “The system application is not responding”.

However, this method should be used as a last resort, since when you use it, you will lose all your personal files. So making a backup copy of your files is highly recommended in this case. If you value files only on the SD card, then you should not worry, since this process will not affect it.

So, go to the Settings of your device again. Go down to their very bottom and find the “Backup and reset” section there. Click on this item and make sure you check the box next to the option “Back up my data”. If not, check the box and wait for the archiving process to complete.

Then click on the “Reset settings” button and confirm your intentions by clicking on the “Reset” and “Erase everything” button. Now you just have to wait for the end of the reset process. After resetting your Android device to factory settings, check it for the “System application is not responding” error. It surely should have been solved.

Method Make sure your Android is up to date

Outdated software can cause a huge number of problems for any user. On Android OS, this can also be problematic. Perhaps your device or some software on it has not been updated for a long time, which led to the appearance of the error “The system application is not responding.” To try to fix it, you should try upgrading.

To get started, open the Google Play Store and go to the “My Apps & Games” tab, which can be done using the slide-out panel on the left. You will see a list of applications that are waiting for the update queue. Update all applications to the most recent version, or you can click on the “Update All” button to start their automatic updates one by one.

Once they are all updated, test your smartphone for the “system application not responding” error. If it is not there, then for the future you will know that you need to update your software when it appears again. If it is still present, then you can also try performing a system update.

To do this, go to the Settings of your Android device and go to the “System Update” section. Next, click on “Check for Updates” and wait until the check is completed. If the utility finds available updates, install them and restart the device. Then check it for the error “The system application is not responding“.

Method for Clearing Cache Partition

Before we get into the really hard steps, let’s try clearing the cache partition on your Android device to fix the “system application not responding” error. Be aware that clearing a cache partition is not the same as a hard reset, which erases absolutely everything from the device. Temporary and application files will be deleted. All your app data will be erased, but Google Play will automatically restore it as soon as you use it again.

READ  How to block hidden number on Samsung

First, turn off your Android device completely. Then hold the key combination Home Power Volume. Release the Power button the moment you feel vibration, but continue to hold the rest.

Release the other two buttons when the Android logo and “Recovery Mode” appear on the device screen. Use the volume buttons to navigate the menus and select “Clear Cache Partition”. Then press the power button to select that item. Wait for the process to finish, after which the device will reboot, and then check for the error “The system application is not responding“.

Method Start in Safe Mode

It doesn’t matter what version of Android your device is running on, as third-party software can still cause it a bunch of problems. On the Internet, you can find multiple messages that the problem, most often, arises from a software conflict. Let’s check it out.

Running your Android smartphone in Safe Mode will provide the necessary conditions for verification, since no third-party software will be loaded into the system (it will simply be prohibited for it). If the error “System application is not responding” does not appear in Safe Mode, it will be obvious that it was caused by third-party software.

To enter Safe Mode, press and hold the Power button until the Boot Menu appears. Then hold down the Power button again so that you are prompted to boot into Safe Mode. Click on the Ok button.

Note: if the above instruction did not help you enter Safe Mode, then it is executed on your device somehow differently. Just search for “Your Phone is Safe Mode” and you will definitely find what you are looking for.

After these steps, your Android device should enter Safe Mode. In the lower left corner, you should see confirmation of this. Play around with your device a bit to see if the error appears in Safe Mode.

If the error “The system application is not responding” did not appear this time on your smartphone, then the cause of the problem is obviously in some third-party application on the device, due to which the conflict arises. Unfortunately, you will have to uninstall all applications and then reinstall them one by one to determine the culprit.

Solution three

If you understand that this is “Android system UI stopped”, you will remember that such an inscription appeared on the smartphone screen earlier, long before the release of the unfortunate update, then you need to go the other way:

  • Go to the “Settings” menu, scroll down to the “Application Manager”. We will need the “All” tab.
  • In the above section, find “System UI”.
  • First of all, click on the “Clear cache memory” button.
  • After this action, tap on “Stop”.
  • Now restart your smartphone.
  • Then you will need to log into your “Google Account” associated with this device and restart it. This is done simply: turn it off and re-sync with your phone.
  • Next, you should receive a message about the release of new updates for your gadget. Try to apply them as soon as possible.

That’s it, problem solved once and hopefully forever!

A bug related to the Android system UI can have several reasons. If this happened after a recent device update, then the solution takes place according to the first two presented schemes. If the reason is not obvious, then it is better to deal with the bug according to the last instructions specified in this material.

The error message “System application is not responding” may appear on Andro

Start your Android device in safe mode

The reason for not working correctly may be the failure of the application you installed or its incompatibility with the device, in order to check this you need to enter Android into safe mode.

We will not consider in detail how to enter Safe Mode, you can find out from our article: How to start Android in Safe Mode.

Clearing the cache on Android

The next step to be done is to delete the cache on the Android device and applications. You can learn more about what a cache is on Android and how to remove it from our detailed publication.

  • Google Play Apps and Services.
  • Semi-clearing the cache on the device.

The first option. you need to go to the settings of applications and services of Google Play and clear the cache (see detailed instructions in the article).

The second option is a tougher one that removes not only all accumulated garbage, but can also delete the data you need, so before deleting the cache from the device, back up the data on Android.

  • Turn off your smartphone or tablet completely by holding down the power button and confirming the shutdown.
  • Then you need to simultaneously hold down and hold the power and volume up buttons to enter the “Recovery menu”.
  • Next, “Recovery Mode” will start
  • In this mode, you need to select “Clear device cache”, you will see: wipe cache partition (to select the desired item, use the volume buttons to navigate).
  • After completely deleting the cache on Android, reboot.

Factory reset Android device

When you have already tried all the methods and the “system does not respond” error, the only thing that will help you in this case is returning the device to the factory settings, which will help debug failures and possibly even remove virus programs and malicious worms hiding in the applications you downloaded.

To find out more about why and how to reset Android to factory settings, read our blog article.

There are several options for how to reset the settings, we will offer the easiest one:

  • Open in the application “Settings”.
  • Go to the “Restore and Reset” menu section (in your version of Android, this section may be called differently).
  • Select the item “Reset to factory settings”, then once again you need to confirm the action to reset all settings in the Android device.

Important: it should be remembered that when resetting to factory settings, your phone or tablet will delete all your installed applications and erase the data, so you must first make a backup copy of the data so as not to lose the necessary photos, contacts, documents.

READ  Set up digital TV on Samsung via antenna

Solution two

Many people ask: “When an error occurs related to the Android system UI, how to restart the device?” We advise you to take a slightly different path:

  • Go to the settings menu, find the “Applications” section.
  • Now click on the “Menu” button.
  • In the list that appears, select “Show system applications”.
  • Among the presented, find the “System Interface”.
  • Go to its “Memory” section. Clear all data as well as cache.

After these manipulations, the system error should disappear. If this did not happen, then you can think about applying such a radical measure as resetting to factory settings. But before that, be sure to make a backup of all important data that is stored on your gadget.

When an error appears. the System application is not responding

The system application not responding error appears after downloading and installing the application on an Android device. In addition, the application can be downloaded both from Google Play and by installing the APK file.

How does the error appear?

This system bug is mostly noticed by the owners of Samsung gadgets. A pop-up message appears on the device screen with the approximate content: “The com.Android.systemui process has been suspended.” When it may arise?

You pressed the “Home” button, turned on the camera, launched the game, the application, entered the “Google Play”.

What is the Android system UI? Com.Android.systemui denotes a service that is responsible for ensuring that the user interface is configured correctly in Android. Refers to the main, which is why it is highly undesirable to disable it.

The appearance of such an error on phones is a massive phenomenon. It appears especially often after clicking on Home. Samsung owners associate this bug with the latest “crooked” update for the platform. It caused the problem of working both with this service and with a number of others.

If the “Android System UI Stopped” window appears, what should I do? We will present you with three effective ways to fix the problem.

Solution one

We figured out what it is. system UI Android. Now let’s see how to get the service back to work properly:

  • Go to the “Google Play” application. Type Google in the search bar.
  • The first application in the list will appear in front of you. Delete it.
  • Then there will be a similar window: “Delete all updates for this program?” Confirm this action.
  • Press the “Home” button again, turn on the camera, go to the application, upon entering which an error pops up. If now the annoying window does not appear, then the problem is solved.

When these actions did not lead to anything, it is worth deactivating auto-update in the settings. This action will help to avoid the manifestation of the bug until the new update for the “Android” OS.

Solution two

Many people ask: “When an error occurs related to the Android system UI, how to restart the device?” We advise you to take a slightly different path:

  • Go to the settings menu, find the “Applications” section.
  • Now click on the “Menu” button.
  • In the list that appears, select “Show system applications”.
  • Among the presented, find the “System Interface”.
  • Go to its “Memory” section. Clear all data as well as cache.

After these manipulations, the system error should disappear. If this did not happen, then you can think about applying such a radical measure as resetting to factory settings. But before that, be sure to make a backup copy of all important data that is stored on your gadget.

Android system UI: what is it? Three ways to troubleshoot a system error

Smartphones based on “Android” can be safely called reliable devices. However, their owners are not immune from annoying OS errors. One of them is related to the Android system UI. What it is, and how to fix this problem, we will tell you later in the article.

How does the error appear?

This system bug is mostly noticed by the owners of Samsung gadgets. A pop-up message with the approximate content appears on the device screen: “The com.Android.systemui process has been suspended.” When it may arise?

You pressed the “Home” button, turned on the camera, launched the game, the application, entered the “Google Play”.

What is it. Android system UI? Com.Android.systemui denotes a service that is responsible for ensuring that the user interface is configured correctly in Android. Refers to the main, which is why it is highly undesirable to disable it.

The appearance of such an error on phones. a massive phenomenon. It appears especially often after clicking on Home. Samsung owners associate this bug with the latest “crooked” update for the platform. It caused the problem of working both with this service and with a number of others.

If the “Android System UI Stopped” window appears, what should I do? We will present you with three effective ways to fix the problem.

Solution three

If figuring out what it is. “Android system UI stopped”, you remember that such an inscription appeared on the smartphone screen and earlier, long before the release of the ill-fated update, then you need to go the other way:

  • Go to the “Settings” menu, scroll down to the “Application Manager”. We will need the “All” tab.
  • In the above section, find “System UI”.
  • First of all, click on the “Clear cache memory” button.
  • After this action, tap on “Stop”.
  • Now restart your smartphone.
  • Then you will need to log into your “Google Account” associated with this device and restart it. This is done simply: turn it off and re-sync with your phone.
  • Next, you should receive a message about the release of new updates for your gadget. Try to apply them as soon as possible.

That’s it, problem solved once and hopefully forever!

A bug related to the Android system UI can have several reasons. If this happened after a recent device update, then the solution occurs according to the first two presented schemes. If the reason is not obvious, then it is better to deal with the bug according to the last instructions specified in this material.

How to determine if it is a virus or not?

How does the virus manifest itself? It disguises itself as a system file, launches the download of unknown third-party applications, which in turn show ads in the smartphone itself. Often. it is an obtrusive advertisement, and sometimes of an obscene nature. The Trojan can appear in the system when:

  • custom Android firmware;
  • downloading applications from unknown sources;
  • downloading “one-day” applications from the Play Market, etc.;
  • downloading and then launching malicious files from the Internet, email, instant messengers, etc.
READ  How to Disable Lock Pattern on Samsung

Remember if something like this happened to your device before the error occurred. Also check the creation date of the com.Android.systemui file itself (via the standard application manager, in the properties). If the date coincides with other system files, it is more likely that an error occurred in the operation of the system file. In case the file has appeared recently. probably a virus.

system, responding, samsung, phone

Advice! On Android devices, the error code carries specific information. For example means that: com. error in system application, phone. malfunction in the standard “Telephone” program.

S7 System UI Tuner. How to access and use

Is there any way to enable System UI Tuner in Samsung Galaxy S7 with Nougat, or has Samsung removed this feature? I’m especially looking for notification power controls as there doesn’t seem to be a way to disable the heads-up without making them silent.

People also read:

  • Samsung Galaxy S7 Edge Camera Tips
  • Difference Between Moving Photos and Animated GIFs on S7
    For Android phones such as Nexus or HTC with Android 7.0 Nougat, you can easily enable the System UI Tuner by pressing and holding the settings icons in the upper right corner of the notification bar so that you can change the items displayed in the interface However, this is not the case for the Samsung Galaxy S7 If you tried, you would find that nothing happened by long press on the settings icon.
  • But every problem has its own solution. In this article, you will learn how to enable System UI Tuner in Galaxy S7 with Nougat version in Part 2. Before we start, you can also check in detail what you can do with System UI Tuner and learn more about it.

    How to enable System UI Tuner on Android 9.0 Pie to remove status bar icons “Android :: Gadget Hacks

    “For the first time since its inception, the famous System UI Tuner should be unlocked in a new way. You can no longer long press the gear icon (found in quick settings) until it starts spinning and reveals hidden settings. Android 9.0 Pie has a new workaround to open the menu.

    For those who don’t know, System UI Tuner lets you choose which icons to display in the status bar. For most icons, you can simply turn it off or on, but there are some additional controls for time and battery life. It’s a great tool that gives you a little more customization and removes unnecessary icons that fill up your status bar.

    Gallery

    Offers viewing of photos and videos. Sorting by people, places and other specified parameters is possible. In each album, you can create slideshows, GIFs. There is a built-in image editor.

    System ui app stopped on Samsung Galaxy: what to do?

    Smartphones and tablets manufactured by the Korean concern Samsung are distinguished by excellent quality and an abundance of technological innovations that have made the products of this company the permanent leader in sales among all manufacturers of such devices. However, even such advanced devices are characterized by all sorts of malfunctions, glitches, errors and other manifestations of unstable operation.

    Reasons for “Android SystemUI has stopped”

    Android users know that OS updates can be really effective as they fix bugs and restore overall device performance. However, these updates themselves can sometimes be a problem because some corrupted OS updates won’t download or install properly. An infected update may cause the error “Sorry, SystemUI has stopped” or “Android System UI is not responding”.

    Android updates are known to be related to the Google app. In most cases, the issue can be resolved after updating the Google app. Although updating Google App can also lead to this error due to some glitch if not installed correctly.

    Another reason for this dreadful error could be flashing a new ROM and some problems with installing a firmware update. In most cases, restoring data from a backup from a Google or Cloud account can also result in the “Android SystemUI Has Stopped” error.

    Meanwhile, no matter what the cause of this error is, you can easily get rid of it with the below fixes, you can use any of these fixes to fix the problem yourself.

    system, responding, samsung, phone

    Also, click here for the best solution for Screen Overlay found on Samsung error and Phone won’t connect to Wi-Fi.

    Fixing “System UI Application Stopped” error on Samsung Galaxy

    There are actually several solutions, but we’ll start with the first and foremost. Read the instructions below carefully so you don’t miss anything.

    How to fix the “System UI application has stopped” error:

    If the problem persists after that, although this happens extremely rarely, then try the second method:

    • Launch the Settings app
    • Open the “Applications” section
    • Press the menu button, and then select Show system applications from the list.
    • Find the “System Interface” application in the list and under the memory section, clear the data and cache
    • Now check if the error is gone.

    If this method did not help, then it is necessary to resort to other, more drastic measures. You need to do a full reset of your phone, that is, restore your device to factory settings. After the process is complete, all personal data in memory will be deleted, so take care of backing up the necessary data.

    We’ve already talked about how to reset any Samsung Galaxy device many times, so check out the ready-made instructions.

    Also subscribe to our pages, or. to be the first to know the news from the world of Samsung and Android.