Test Print For Canon Inkjet Printer

Canon PIXMA G3410
Specifications

test, print, canon, inkjet, printer

Key features

Increased page yield

Built-in ink tanks

Hybrid ink system

Canon PRINT app

PIXMA Cloud link

Borderless printing

Detailed description of technical characteristics

General technical characteristics. Function

Wi-Fi, Print, Copy, Scan, Cloud Link

Printer specifications. Print resolution

4800 1 x 1200 dpi

Printing technology

2 FINE cartridges (black and color)
Built-in CISS system

Print speed black

OK. 8.8 images / Min 2

Color Print Speed

OK. 5.0 images / Min 3

Photo print speed

Borderless 10 x 15 cm: Approx. 60 seconds 4

Borderless printing

Yes (A4, Letter, 20x25cm, 13x18cm, 13x13cm, 10x15cm)

Cartridges AND RESOURCES. Standard cartridges. Cartridge yield (plain paper)

Color document printing A4 5
Black: 6,000 pages
Color 7000 pages
With standard page filling

Cartridge resource (photo printing)

Printing color photos 10×15 cm 6
Color: 2000 photos
With standard page filling

Supported paper types. Paper types

Plain paper
High Resolution Paper (HR-101N)
Photo Paper Plus Glossy II (PP-201)
Professional Photo Paper Photo Paper Pro Luster (LU-101)
Semi-Gloss Photo Paper Plus Semi-Gloss (SG-201)
“Everyday Use” Glossy Photo Paper (GP-501)
Matte Photo Paper (MP-101)
envelopes

Maximum paper load

Rear tray: 100 sheets or less (plain paper)

Paper size

A4, A5, B5, 10x15cm, 13x18cm, 20x25cm, Envelopes (DL, COM10), Letter, Legal

Paper density

Plain paper: 64-105 g / m²
Canon Photo Paper: up to 275 g / m²

Scanner specifications. Scanner type

CIS flatbed scanner for photos and documents

Scan Resolution (Optical)

600 x 1200 dpi 7

A4 document scan speed

OK. OK. 19 seconds 8

Scanning depth (in / out)

Color: 48/24 bit
Grayscale: 16/8 bit

Maximum document size. CHARACTERISTICS copier. Copy speed

Sfcot: Approx. In 24 seconds 9
sESAT: Approx. 3.5 images / Min 10

Number of copies. Copy functions

Copying a Document (Plain Paper)

Enlarged copy

Full sheet printing

Interface. Screen type and size

LCD screen (1.2-inch, segment monochrome)

Interface type: PC / Mac

Hi-Speed ​​USB (Port B),
Wi-Fi: IEEE802.11 b / g / n
Wi-Fi Communication Security: WPA-PSK, WPA2-PSK, WEP, Admin Password

Interface type. Other

PIXMA Cloud Link (from smartphone or tablet)
Canon PRINT Inkjet / SELPHY App
Mopria (Android)
Google Cloud Print
Access Point Mode

Software. Supported operating systems

Windows 10 Windows 8.1, Windows 7 SP1
.NET Framework 4.5.2 or.NET Framework 4.6 required

Supported mobile systems

Ios, Android, Windows 10 Mobile

Minimum system requirements

Windows: 3.1 GB disk space, Internet Explorer 8
Monitor: 1024×768 XGA

Supplied software

MP Printer Driver with Scanning Utility
My Image Garden with Full HD Movie Print 11
Quick Menu
Easy-WebPrint EX (download) 12

Physical characteristics. Dimensions (W x D x H)

OK. 445 x 330 x 163 mm

Acoustic noise level. Working temperature. Operating humidity

10-90% (non-condensing)

Source of power

AC 100-240 V, 50/60 Hz

Energy consumption

Off: Approx. 0.2 watts
Standby (connected to PC via Wi-Fi): Approx. 1.2 W (scanning lamp off)
Standby (all ports connected): Approx. 1.2 W (scanning lamp off)
Time to enter standby mode: 10 min 50 sec.
Copy: Approx. 11 W 14

Any specifications are subject to change without notice.

Print speed varies depending on system configuration, interface, software, document complexity, print mode, page coverage, type of paper used, etc.

Ink consumption varies depending on text / photo printed, software used, print mode, and paper type used. For cartridge consumption information, see www.Canon.com/ink/yield.

Scan speed may vary depending on system configuration, interface, software, scan mode settings, document size, etc.

Copy speed varies depending on the complexity of the document, print mode, page coverage, type of paper used, etc. It does not include warm-up time.

  • Drop spacing is 1/4800 inch minimum.
  • A4 document print speed on plain paper based on ISO / IEC 24734 digital average print speed measurement standard.
  • A4 document print speed on plain paper based on ISO / IEC 24734 digital average print speed measurement standard.
  • Photo print speed determined based on driver’s default settings using ISO / JIS-SCID N2 standard on Photo Paper Plus Glossy II, excluding computer pre-processing.
  • Page Volume. Calculated as measured by Canon standard method using ISO / IEC 24712 and simulated continuous printing with replaceable ink tanks after initial setup.
  • Page Volume. Calculated as measured by Canon standard method using ISO / IEC 29103 and simulated continuous printing with replaceable ink tanks after initial setup.
  • Optical resolution is a measure of the maximum hardware resolution, measured in accordance with the ISO 14473 standard. When scanning at high resolution, the maximum size for scanning is limited.
  • Scan speed for color documents is measured according to ISO / IEC 24735 Annex C Test Chart A. Scan speed is the time from pressing the scan button in the scanner driver until the beep goes off.
  • Color document copy speed measured based on sFCOT and sESAT performance testing in accordance with ISO / IEC 29183.
  • Color document copy speed measured based on sFCOT and sESAT performance testing in accordance with ISO / IEC 29183.
  • Full HD Movie Print is available for MOV and MP4 movies created with Canon digital cameras and camcorders. It is required to install the software supplied with the Canon digital camera or camcorder on which the video was shot. MOV files require: ZoomBrowser EX / ImageBrowser (version 6.5 or higher), MP4 files require: ImageBrowser EX (version 1.0 or higher).
  • Easy-WebPrint EX requires Internet Explorer 8 or later.
  • Plain paper (A4, B / W). Acoustic noise measurement based on ISO7779 standard.
  • When copying ISO / JIS-SCID N2 image (printed by inkjet printer) on A4 size plain paper with default settings.

We use cookies to give you the best experience with Canon and the best experience on our website. Learn more about our use of cookies and Change your cookie preferences here. You accept our cookie policy on your device by continuing to use our site or by clicking I Agree.

Canon PIXMA iP7240

High performance photo printer with 5 individual cartridges, Wi-Fi and smartphone printing. Low profile design, two built-in paper trays, automatic two-sided printing and direct printing to discs.

Advantages

  • High performance Wi-Fi 5-color photo printer
  • Print lab-quality photos quickly
  • Low-profile design with built-in paper trays
  • Mobile printing and Apple AirPrint
  • My Image Garden Software
  • Direct disc printing and automatic duplex printing
  • Get more profitable printing with optional XL cartridges

Detailed description

Learn more about the Canon PIXMA iP7240

High performance, stylish design

With Wi-Fi connectivity and 5 separate ink tanks, this high-performance photo printer is perfect for fast, high-quality printing of photos, documents and CDs. It is easy to access it from anywhere in the house, including access from mobile devices. Stylish new low-profile chassis with auto-open tray ideal for use in tight spaces.

Support for smartphones and tablets

Wi-Fi connectivity and the Canon PRINT app make it easy to print with smartphones and tablets from virtually anywhere in the house. You can also directly print photos, emails, web pages and other documents from Apple devices such as iPhone, iPad, and iPod touch using Apple AirPrint.

Improved material use cases

Fully integrated dual paper cassettes allow you to load different sizes and types of paper at the same time. Direct Disc Printing. Allows you to design and print labels directly on compatible Blu-ray discs, DVDs, and CDs, and create matching covers for easy organizing and sharing with family and friends.

creativity when printing photos

Print your photos faster and easier with My Image Garden software and unleash the full potential of your PIXMA printer. Relive your memories with photo organizing features, including facial recognition, which let you quickly find all your photos stored on your computer, even those you have long forgotten, and combine them into stunning collages for printing. With the Print Your Days app, you can organize and print your photos directly from.

High print speed

For stunning detail and fast printing of documents and images at home, this photo printer features a best-in-class 1 picolitre print head with a resolution of 9600 dpi. The printer provides fast print speeds for A4 ISO ESAT 15ip ​​documents. / Min in black and white and 10 images. / Min in Color and prints 10 x 15 cm borderless photos of exceptional laboratory quality in approximately 21 seconds.

Save paper and energy

Auto Duplex saves paper while producing more professional looking documents. Energy saving with auto power on and auto power off function allows the printer to turn off automatically after a specified time and turn it back on when printing starts.

Print more for less

Reduce waste and print more efficiently thanks to a separate ink tank that only allows you to change out of color. XL ink cartridges save you money, printing up to 2.2x more pages than a standard ink tank to replace, great for high volume printing.

Product Specifications

Find out more about the Canon PIXMA iP7240, its features and what it can do.

Change only the ink that is running out

Superior Lab-Grade Printhead

Micro ink droplets for high precision printing

High resolution photo printing

Direct print to disk

Automatic duplex printing

Wireless use and communication

Supports tablets and smartphones

Universal creative program

Printing images from videos

Printing photos from

Extra high yield cartridges

Canon Pixma MG5420. inkjet printer review

By Igor March 13, 2015

What about the Canon Pixma MG5420?

Canon Pixma MG5420 is in many ways similar to Canon Pixma MG4220, but has some advantages such as excellent print quality of text and photos as for an inkjet all-in-one printer, the ability to print to optical discs. The cost of our printer is slightly higher for Canon Pixma MG4220. These characteristics make our printer an excellent choice for home and office use.

Canon Pixma MG5420

Like the MG4220, the MG5420 was released as a printer, which was focused on performing common tasks. It will be difficult to use in the office, since it lacks such office functions as fax, automatic filing of documents. Another inconvenience is that there is not enough paper for scanning. As for the Internet connection, there is no wired connection, it is possible to connect to the network only using Wi-Fi.

The main characteristics of the device are limited to printing, scanning and copier. As for additional features, it provides direct scanning to a memory card and printing from a storage medium. You will be able to preview the image from the memory card on the 3-inch color display.

Now let’s move on to paper management. The total paper volume is 125 sheets, this figure is higher than in the MG4220, but this volume is enough only for minor home use. The only plus is the small photo tray, which holds 20 sheets 4 x 6, so you won’t have to refill the main tray for photo printing. Another positive aspect of this device will be double-sided printing, which will greatly facilitate paper management. Perhaps you will be interested in a detailed review. how to choose a 3g modem to use the wireless Internet in your home.

READ  How To Photocopy A Document On A Printer

Canon Pixma MG5420 setup and speed

Tested the system using a USB connection to a Windows Vista system. The installation went fine except for one annoying moment. The printer refused to print the alignment page twice, showed an error on the screen. After turning off and on the printer, we were able to print this page and we had no more problems. Of course, this error does NOT properly inform the user.

As for the print speed of the printer, it cannot be called a serious drawback of the device. We tested the speed with printing business applications. We got 2.5 pages per minute.

This figure is higher than that of the MG4220. But for the same price you can get Epson WorkForce WF.3520, which works much faster. Photo printing speed is high. It took 1 minute 4 seconds to print a 4 by 6 photo. It’s a few seconds faster than the WF-3520 and almost a minute behind the MFC-J825DW.

Quality and other conclusions Canon Pixma MG5420

Despite the fact that our printer does not have a high print speed, it is worth noting the quality of the materials printed. The print quality of graphics is the same as for an inkjet all-in-one printer, and the print quality of photos and text will pleasantly surprise its users. The edges of the text characters are NOT as sharp as they would normally appear in a laser printer. But the text came out very readable even when printing small font sizes, which cannot be said about most inkjet devices. This quality will suit most business publications.

Graphics print quality is average, most inkjet all-in-one printers cannot match ours. Such a device will be a godsend for business use, for example, for PowerPoint handouts. It all depends on the opinions of users. Photo printing is also above average.

This all-in-one printer provides an optical disc printing program, but there is a problem where to find the program commands. You can read this information using the on-screen guide. As for mobile printing, there is an AirPrint function, which you can use if you are connected to a Wi-Fi network, since there is no Ethernet connection.

The best argument for considering this printer is the print quality of the materials. Few inkjet printers That can compete with our model in print quality, so this printer is an excellent choice for work at home. Don’t forget about printing graphics as well. Printing from memory cards, scanning to media, printing to optical discs make Pixma MG5420 a device for the office and for everyday tasks.

How to clean the print head of a Canon printer?

The print head in Canon printers needs to be cleaned sometimes. Otherwise, she may be forgotten. As a result, the print quality will deteriorate greatly. And if the inks are completely dry, the printer may stop working altogether. There are several ways to flush Canon printheads. Let’s look at ways to clean Canon Pixma, Canon MP250 and Canon MP280 printers.

Top Causes of Canon Head Clogs

Most often, the head of the printing device breaks in the following cases:

  • After a long period of inactivity. When the inks are dry, cleaning the print head through the device service program will help.
  • Due to mixing incompatible ink for Canon printer. Water-based and pigment inks settle, curl up and forget nozzles. It is better to fill cartridges with the same consumables.
  • Due to printing with the introduction of empty cartridges. Especially carefully observe the condition of the cartridges, we fill them on time, because printing with the rest of the ink quickly puts the print head out of order.

With a period of time, even if all the basic rules are observed, the nozzle of the device is still clogged. Then you have to clean the print head. But correct use of the printer can greatly extend its life.

Canon printers are equipped with a software cleaning function. You just need to run a special program on the PC and the device will remove the blockages by itself. Can manually clean Canon ink cartridges and print head.

How to clean the head of a Canon printer hardware?

In all inkjet printers, the ink dries over time. Therefore, the problem with a dried print head is quite common. In this regard, the devices have a specially provided program for cleaning the printer from blockages.

Canon printheads can be cleaned without first removing them. You can carry out the cleaning process using a computer. When connecting a printer, the system must find and install the driver. But it is better to install the software from a disk, which is in a set with a printing device.

On the manufacturer’s website, you can find utilities for the device. They have various settings and interface views. You don’t have to download them. It is also possible to wash the print head in this way:

  • Refill the cartridges.
  • Connect your printer to your computer.
  • Put blank paper in it.
  • On a PC go to the “Control Panel”, and then to the menu “Devices and Printers”.
  • Click on the printer icon.
  • Go to Properties and Services.
  • Choose the type of cleaning.
  • The printer will start printing and the ink will break through the blockage.
  • After cleaning the Canon printheads, the system prompts you to print a test page.

Perform standard head cleaning first. It may not work at first. Repeat the procedure and print a test page. If this does NOT work, deep clean the nozzles on your Canon printer. If this does not help, you will have to flush the print head manually.

How to flush the print head of a Canon printer manually?

To flush the printheads of a Canon inkjet printer, open the cover. Turn off the product, and then remove the print cartridges from the product. How to remove the print head will depend on the device itself. In the documents that come with the device and on the manufacturer’s website there is an instruction manual. It contains all the features of the device.

To clean the print head Prepare:

  • Flushing liquid;
  • Gauze, napkins or bandage;
  • Syringe;
  • Compact plastic container;
  • Dropper tube.

Place any type of material under the print head: napkins or bandages soaked in flushing fluid. Also wash the intake holes. Remove the seals, clean them and wipe the housing with the printheads near the intake holes. Otherwise, the print head in the printer will not function properly, and the ink will come in intermittently.

When all the paint is gone from the head, do not rush to remove the part. You need to leave it for a couple of hours. If the part is clean, then everything turned out correctly. If necessary, clean it from flushing liquid. To do this, use a cotton pad and clean water.

In order to reassemble the printer, it is necessary to dry the print head and put it in place. After that, you need to lower the latch and return the cartridges to the right place.

Canon printer head flushing starts with slightly aggressive fluids and ends with aggressive ones. Further operation of the print head when using corrosive liquids is NOT guaranteed, but it is better to clean it completely.

After cleaning the printheads of the Canon printer, the machine should start up as before. To prevent the ink from drying out, print a test page once a week. This is especially true for those users in whom the printer has been idle for a long time.

Test print on Canon inkjet printers

In inkjet printers and all-in-one printers Canon service mode, depending on the model of the machine, is possible in two ways:

Using the GeneralTool service program. Printers: i250. I355, iP1000, iP1100. Ip1800, iP2500, iP2600 (at the end of 2008, in the future other printer models may be released, but not having a built-in service)
over, for each group of models. Own version of the GeneralTool program

By pressing a combination of buttons. All other models.

For all THESE printers (Canon i250. I355 and Pixma iP1000, iP1100. IP1800, iP2500), before starting the service program, you must first make a “button input” (Without this, the service program may NOT work. Naturally, the printer must be connected at this time to the computer):
– Turn off the printer (and unplug the power cord)
– Press and hold the power button and connect the power cord (DO NOT release the ON button)
– When the power indicator lights up. While continuing to hold down the ON button, press the Resume button twice (sometimes this button is called “Continue”. It doesn’t matter what you call it. This button is indicated by a triangle in a circle). Each time you press the Resume button. The indicator switches from green to yellow (on the second press. From yellow to green), then release both buttons.
– The ready indicator will blink for a while and light up constantly. The printer is ready to work with the service program.

So that you do not come as a surprise. In service mode, the printer is defined as a new device. It is usually automatically installed as “copy 1”. But if for installation it asks to insert the installation disk with the driver, or specify the path from where to install it. Refuse if the driver for this printer is already installed in the system (in normal mode), then the service program works without problems.

Next, run the General Tool for your printer model. In the program window that opens, in the upper right corner. Installing the printer port. Case here is the “USB PORT” window, press the arrow and select from the offered ports in the drop-down list (if only one printer is installed on the computer, then only one port will be offered). If there are active ports in the drop-down box (empty field). You will have to write it manually (in this case, the printer driver will have to be installed). Open the “printers and faxes” folder, right-click on the desired printer, select “properties” and open the “ports” tab in the properties window, look at which port the printer is installed, type this number in the “USB PORT” window.

Let’s consider the main functions using the GeneralTool for i350 as an example.
In the rest of the service programs, the location and number of function buttons are practically the same. The difference is negligible. I have never used many functions. There was no need.

Top to bottom, left to right:
USB PORT. Setting the printer port with which the program will work
TEST PRINT. Test print options, TEST PATTERN 1, 2. There are two windows CLEANING and EEPROM CLEAR. If a mouse is clicked on them and a “tick” is put on, these operations will be performed simultaneously with the printout of the test page (EEPROM CLEAR is used to reset the EEPROM data. Reset the number of printed pages, reset the “diaper”.)
SET DESTINATION. Setting (changing) the model and region of the printer (it is better not to touch these buttons!)
EEP-ROM DAMP. Saving to printer EEPROM disk
EEP-ROM INFORMATION. Shows the main data of the EEPROM of the printer in the opened window.
GET DEVICE ID. Identification of the connected device, when you click on the DEVICE ID, information about the active printer appears in the window on the right.
PRINT HEAD COMMUNICATION. Never used
ENDURANCE MODE. Never used
INK CONSUMPTION. Varying degrees of head cleaning, from light to deep, differ in the amount of ink pumped through the head.

READ  How To Connect Printer To Android Phone

After installing the port, it is advisable to check if there is an exchange of information between the printer and the program. They will call DEVICE ID and see if the program sees the printer (especially important if several printers are installed in the system).
After that they will be named TEST PATTERN, to print the test (I usually click the right one of the available ones, depending on the version of the program. 2 or 3, when printing THESE tests, less ink is used)
For i250 printers. I355 I use this particular program, despite the fact that the i320 has its own program (but it works very unstable, so I DO NOT use it) for comparison, I give screenshots of the second versions of GeneralTool available to me

Printer test print. How to print a test page

  • Windows computer, printer

Left-click the “Start” button in the taskbar and select “Control Panel” from the list of services. Then you need to select the “Printers and Faxes” section. Depending on the operating system you are using, the section name may be adjusted. In Windows 7 and Vista, this section is referred to as Devices and Printers. The section contains a list of all printers connected to the computer. If there are more than one printer on the list, find the model for which you want to print a test page. Move the mouse cursor over the selected printer and press the right button. The shortcut menu for the printer appears. From the context menu select the command “properties” and click on it with the left mouse button. In the “Properties” menu, open the “General” tab and left-click on the “Test Print” command. If the printer is being started for the first time or has NOT been used for a long time, you will need to wait a few seconds (15 to 30) before printing starts. It just takes a printer driver time to collect all the information about the system. In the future, the print processing speed will be higher. The test page parameters of any printer are defined by default and absolutely all printer parameters are tested during printing. The test page may differ from model to model. When printing finishes, evaluate the test page. It should contain graphics, text, samples of absolutely all colors. There should not be any distortions and irregularities. If the print was done with an inkjet printer, then there should be no ink drip. When the printer finishes printing the page, you will be prompted to save the print settings. If all the parameters of the test page suit you, you can simply call it by the command “save print parameters by default”.

When working at a computer, there is often a need to print a page so that the information is at hand. These can be important documents or interesting web pages.

  • A computer;
  • A printer
  • Paper.

Connect a printer to your computer or laptop. For the printer to work on the computer, its drivers must be installed. To set up the printer, use the disc that came with it. Make sure the printer is recognized by the operating system of your computer or laptop when you connect it. Make sure the cable from the printer to the computer is plugged in, the printer is plugged into a power outlet, and the indicator light is on. The printer must have a black ink cartridge (if you are going to print a page in black and white) or color ink cartridges (if you are going to print a page in color). Load the required number of sheets into the dedicated paper tray. Prepare the page for printing. If you are using Microsoft Word or a second word processor, format the text and give it the look you want. Set the desired font and text color. When you’re done, click on the File tab. “Print”. Make the desired settings: specify how many copies of a page should be printed, which pages from the document should be printed, select portrait or landscape paper orientation, specify margin sizes, etc. Start printing.

If you want to print an image, this can be done in most graphic editors, also go to the “File” tab. “Print”, or by clicking on the print icon. The “Photo Print Wizard” appears. Click “Next”, check the boxes next to the images to print and click “Next” again. The program will ask you to select a printer.

Sometimes it is necessary to print a web page. Many web pages have special lightweight versions for printing. There is usually an icon titled “Print version” in the corner under or above the article. If you need to print the page as is, along with all the elements, advertisements and other things, use the browser’s “File” tab. “Print”.

Printing a test page without a PC

For printers With the printer off, press the “Letter” button, Do not release it, press the “on” button, Release it, while continuing to hold the “Letter” for 10 seconds.

For an all-in-one printer without a monitor: the same process, but instead of a “letter”, the “Stop” button (a triangle in circles)

For an all-in-one printer with a monitor: in the “Installation” tab. “Maintenance”. “DYUZ check”. “Start”. “Print”.

Got a brand new printer? In any case, you will need to print test pages to check the print quality. Well, if the printer is connected to a computer, through which you can start this process. And if there is no such possibility? How to print a test page without a computer? Let’s figure it out.

So, the following tips will come in handy for many modern devices. First, load regular, white paper of the correct size into the input tray.

Test print page for inkjet printers It is printed as follows: Turn off the device with the button, press the “Letter” button, Do not release it, press the “ON” button, Release it, continue to hold the “Letter” for about 10 seconds.

For Canon printers: hold both buttons (in this case, the Resume button and the ON button) until the power indicator turns on. After that, while holding the ON button, Release and press the Resume button twice, Release both buttons. After that, the ready indicator will light up, which will signal the service mode. To print a test sheet. Press Resume once, Confirm the action with the ON button.

Printing a test sheet for Multifunction without display: similar process, only instead of the “Letter” button. Stop button (triangle in a circle)

Inkjet Test Page with Display Multifunction: Select the Settings tab, then. “Maintenance”. Menu “Check DYUZ”. Point “Start” and “Print”.

How to print a test page

  • Printer connected to the computer.

To print a test page in the Windows 7 operating system, open the Printers applet: click the Start menu, select Control Panel, in the list that opens, select the Hardware and Sound section, then open the Printers applet.

Select the printer you want to test for performance, right-click and select Properties. In the “Printer Properties” window that opens, go to the “General” tab and click the “Print a test page” button.

To print a test page in Windows XP, click the Start menu, select Printers and Faxes. In the window that opens, select the printer you want to check for operability, right-click and call the “Printer Properties” applet by selecting the “Properties” menu item. In the window that opens (on the “General” tab) click the “Test Print” button.

The “Printer Properties” window can be called from the “Tasks” pane on the left side of the “Explorer” window: open the “Printers and Faxes” folder, click the “Print settings” link. This action can be performed if you are viewing the “Explorer” folders in web mode.

When printing a test page, pay attention to all the letters, faint or bright black spots may indicate problems with the cartridge. If the test page does NOT come out of the printer tray, press the Diagnostics button to launch the Printing Troubleshooter. You can also launch this tool by clicking the Print Diagnostics link on the left side of the Printers and Faxes folder window.

After completing the print operation of a test page, you can click the “Save print settings” button if you are satisfied with the results, otherwise you should carry out diagnostics, or check the connection of the printer to the computer (network cable and usb cable).

How to print a test page on a printer

In the event that the user strives to ensure that the printing is just perfect and does not bring problems, then he should periodically be tested by printing a test type page.

At the same time, the test page is unique because it allows you to test all the elements that are necessary for the correct maintenance of a color printer.

The Epson inkjet page, when downloaded and printed, may show characteristics such as multiple refills, alignment or maintenance cleaning.

What is a test page for a color printer

It is worth noting that the test page for a color printer must be downloaded from the official website on the Internet, and only then it will actually be printed out to check the properties of this device.

To print a test page for a printer, including an Epson type, go to the set of settings for the color unit.

Test page for a color printer

After that, it is worth performing a number of sequential algorithmic operations:

  • Go to the “Start” menu;
  • Select “Control Panel”;
  • Find the “Printers and Devices” icon;
  • Find your own color printer in the window
  • Select the properties of your connected printer;
  • Find the “General” tab;
  • Press the button “Test print”.

The last command allows you to print a test type page that allows you to determine if the printer or its built-in cartridges need advanced service or repair.

At the same time, a test page for a color printer can be selected from more than a dozen options, which allow you to check exactly how people’s faces, landscapes or shades of a certain color will look like.

What is a test page for an HP printer for?

The test page for the HP printer is practically no different from the same pages for the second subspecies. It is worth noting that a specific test page for an HP printer can help you verify that:

  • The basic settings are correctly set;
  • The color is rendered correctly;
  • Only branded drivers are installed;
  • It is possible to check the model of the HP color inkjet printer.
READ  Where Is The Cartridge In A Canon Pixma Printer

After testing the capabilities of the HP printer, by printing a test page, information is obtained that allows you to diagnose problems, as well as resolve any additional questions that have arisen.

Image 3: To check the print quality of six-color systems

It is worth deciding how to correctly download a test page for an HP color and inkjet printer:

  • Click on Start;
  • Select Control Panel;
  • Open the context menu with the right mouse button;
  • Select the Properties item;
  • Find the General tab;
  • Set a test print and wait 30 seconds
  • Print a test page;
  • Analyze the drawing for irregularities and stains.

In this case, you can print a test page without the help of a computer by turning off the printer and pressing the “Letter” button on it, and then just turn it back on, holding the previous button.

To use the test page, you need to select “Open picture in a new tab”

Features of laser printer test page

It is worth noting that a laser printer test page, including Canon, allows you to print it in order to identify problems and shortcomings. At the same time, if the test page printed on a color laser printer comes out too faint or blurry, it is not worth trying to solve the problems yourself.

When contacting a service center, professionals will appreciate the printing and save the laser printer from problems with:

  • Color calibration;
  • Contamination of assemblies and cards from toner residues;
  • Contamination of the rollers for picking up the paper sheet;
  • Non-lubricated laser printer parts.

In order to print a test page on a laser printer, follow the above rules for second models.

Color laser printer

Black and white printer test page

Unlike a color printer, the process of printing a black and white test page follows a different scheme. In order for the test page of a Canon black and white printer to be informative and adequate, it should be printed according to all the rules:

  • Connect a printer to a PC or laptop
  • Install the printer using a branded disk;
  • Install a cartridge with black and white ink and;
  • Load ten or more sheets of A4 paper into the printer’s tray;
  • Using a text editor to prepare an object black and white test page of an inkjet printer for printing;
  • Select the number of copies and page settings;
  • Print a test page.

At the same time, the black and white version of the test page is also very informative, since it allows you to see inaccuracies in the print (dripping, distortion or unevenness).

CISS Forum: Test printing on Canon inkjet printers. CISS Forum

Test print on Canon inkjet printers

| Message Posted on April 20, 2009 18:20 CAT

  • Offline
  • Info
  • Posts: 2067
  • Registration Date: 05 Oct 07
  • Reputation: 187
  • Reputation 2019:
  • Pro
  • In inkjet printers and all-in-one printers Canon service mode, depending on the model of the machine, is possible in two ways:

    Using the GeneralTool service program. Printers: i250. I355, iP1000, iP1100. Ip1800, iP2500, iP2600 (at the end of 2008, in the future other printer models may be released, but not having a built-in service)
    over, for each group of models. Own version of the GeneralTool program

    By pressing a combination of buttons. All other models. For those printers that require service programs to work in service mode. You can download these programs here or here. In addition, some lightweight versions of programs (reduced size) are also here.

    For all THESE printers (Canon i250. I355 and Pixma iP1000, iP1100. IP1800, iP2500), before starting the service program, you must first make a “button input” (Without this, the service program may NOT work. Naturally, the printer must be connected at this time to the computer):
    – Turn off the printer (and unplug the power cord)
    – Press and hold the power button and connect the power cord (DO NOT release the ON button)
    – When the power indicator lights up. While continuing to hold down the ON button, press the Resume button twice (sometimes this button is called “Continue”. It doesn’t matter what you call it. This button is indicated by a triangle in a circle). Each time you press the Resume button. The indicator switches from green to yellow (on the second press. From yellow to green), then release both buttons.
    – The ready indicator will blink for a while and light up constantly. The printer is ready to work with the service program.

    Sometimes, some printers work with a utility program without a pushbutton input, and this is proudly reported by some visitors to various forums, saying that it is a pushbutton input. Not required. And for me some printers worked without a button input, but these are isolated cases. If you want to experiment. You can try it yourself, and if you just need to print the test from the service. DO NOT be lazy to make a push-button input. There will be fewer problems with the program.

    So that you do not come as a surprise. In service mode, the printer is defined as a new device. It is usually automatically installed as “copy 1”. But if for installation it asks to insert the installation disk with the driver, or specify the path from where to install it. Refuse if the driver for this printer is already installed in the system (in normal mode), then the service program works without problems.

    Next, run the General Tool for your printer model. In the program window that opens, in the upper right corner. Installing the printer port. Case here is the “USB PORT” window, press the arrow and select from the offered ports in the drop-down list (if only one printer is installed on the computer, then only one port will be offered). If there are active ports in the drop-down box (empty field). You will have to write it manually (in this case, the printer driver will have to be installed). Open the “printers and faxes” folder, right-click on the desired printer, select “properties” and open the “ports” tab in the properties window, look at which port the printer is installed, type this number in the “USB PORT” window.

    Let’s consider the main functions using the GeneralTool for i350 as an example.
    In the rest of the service programs, the location and number of function buttons are practically the same. The difference is negligible. I have never used many functions. There was no need. Top to bottom, left to right:
    USB PORT. Setting the printer port with which the program will work
    TEST PRINT. Test print options, TEST PATTERN 1, 2. There are two windows CLEANING and EEPROM CLEAR. If a mouse is clicked on them and a “tick” is put on, these operations will be performed simultaneously with the printout of the test page (EEPROM CLEAR is used to reset the EEPROM data. Reset the number of printed pages, reset the “diaper”.)
    SET DESTINATION. Setting (changing) the model and region of the printer (it is better not to touch these buttons!)
    EEP-ROM DAMP. Saving to printer EEPROM disk
    EEP-ROM INFORMATION. Shows the main data of the EEPROM of the printer in the opened window.
    GET DEVICE ID. Identification of the connected device, when you click on the DEVICE ID, information about the active printer appears in the window on the right.
    PRINT HEAD COMMUNICATION. Never used
    ENDURANCE MODE. Never used
    INK CONSUMPTION. Varying degrees of head cleaning, from light to deep, differ in the amount of ink pumped through the head.

    After installing the port, it is advisable to check if there is an exchange of information between the printer and the program. They will call DEVICE ID and see if the program sees the printer (especially important if several printers are installed in the system).
    After that they will be named TEST PATTERN, to print the test (I usually click the right one of the available ones, depending on the version of the program. 2 or 3, when printing THESE tests, less ink is used)
    For i250 printers. I355 I use this program, despite the fact that the i320 has its own program (but it works very unstable, so I DO NOT use it)

    For comparison, I give screenshots of the second versions of GeneralTool available to me
    i320:

    Ip1000:

    Ip1500:

    Ip1200-iP1600-iP2200:

    Ip1300-iP1700:

    Ip1100-iP1800-iP2500:

    (. Just in case. In the programs for iP1100, 1200, 1300, 1500, 1600, 1700, 1800, 2200 and 2500 models to reset the absorber counter, separate buttons have been introduced. CLEAR WAST INK COUNTER, so as not to reset all EEPROM information to zero.)

    Someone may have a question, but why such difficulties if the i250 devices. I355 test nozzles from the “service” tab and so with a grid, and not dies, like in older models, and on a simple test everything is clearly visible. I will give an example (it is quite common). The nozzle test from the normal user mode of the i320 printer seems to be very similar to a normal blockage, all the nozzles print, only some of the nozzles are red. Prints thinner lines. And you can rinse such a head indefinitely, only there will be no improvement from rinsing. And here is a test of the same printer from the service mode. It is already clearly seen here that the red nozzle decoder is faulty. This is not cured, and there is no point in wasting time flushing. Button entry into the service mode for printing a test page, for printers of the “S” series (from S300 and higher), “i” (from i450 and higher), “iP” (Except those discussed above), “IX”, “pro” and most of the all-in-one printer “MP” series. Is the same:
    1. Turn off the printer (with a button, DO NOT disconnect the power cord, but it is better to disconnect it from the computer. In service mode, the devices work autonomously)
    2. Press and hold down the Resume button (indicated by a triangle in a circle), Do not release Resume, press the ON button (keep both buttons pressed)
    3. When the power indicator lights up. While continuing to hold down the ON button, release and press the Resume button twice. Each time you press the Resume button. The indicator switches from green to yellow (on the second press. From yellow to green), then release both buttons.
    4. The ready indicator will blink for a while and light up constantly. The printer entered service mode

    To exit the service mode and turn off the device. Just press ON, Do not press Resume first (the same after performing any of the above operations.After performing any operation in the service mode, the device returns to the service mode and waits for the operator to perform the next (or repeat the previous) operation, or shutdown).

    Three and especially five times. Unless absolutely necessary, Better not to press. If you made a mistake in the number of clicks (or did not count how many times you pressed). It is better to disconnect the power cord (the ON button activates the selected mode) and start over. Author: KAT
    Comments, additions, suggestions.