The Printer Does Not Print Well In Black

DOES NOT print black in a Canon printer

Users often encounter one strange problem when a Canon printer, after a long period of work, no longer prints in black, although recently everything worked fine. In many of them, panic begins immediately. In fact, it is not necessary to panic ahead of time until we have figured out the reason.

It is believed that almost every user with a printer can face such problems. But why can something like this happen? What should I do if my Canon printer does NOT print black? Let’s try to figure it out together and understand what needs to be done in a SIMilar situation.

The Printer Does Not Print Well In Black

Why the Canon printer does NOT print in black?

Quite often, we can come across such an option when our problem is related to the fact that Canon’s print head is damaged. During such a malfunction, even a new cartridge is also NOT able to correct the situation. It is not very easy to give a diagnosis during such a problem. What should I do when my Canon printer stops printing in black? Perhaps the time has come to take our favorite printer to a specialist, to a service center. We recommend informing specialists in detail about those suspicions that we have about the fact that head malfunctions are possible. They will consider this, and if it turns out that everything is so, you have a choice of several ways to develop this event.

The first option involves replacing a broken element. The second option involves purchasing a new printer. Do NOT panic ahead of time. Damage to printheads is a fairly common problem. And it’s not a fact that your printer has stopped printing in black for this reason. If for a start you want to exclude SIMpler reasons, then postpone the visit to the service center for a while.

Why Canon Black Cartridge Does Not Print?

Another prerequisite for which the printer may stop printing in black is clogging. If suddenly the Canon printer stops printing in black, and you do not know what to do, but carry the device to the service center desires comments, then you can try to check what happened yourself. Try to print a test document. Suppose you failed to complete this action, although the settings indicate that there is still black ink in the printer. Try using a printer-specific flushing solution. You need to drop this solution onto the print head and wait a little. When cleaning is done, try again. If this works, you no longer have to puzzle over the question of why the device does not print in black. The problem was found and fixed. But what if flushing the printheads doesn’t work? You can try to find the reason for this behavior elsewhere. Let’s try to figure out what else such a phenomenon can be connected with.

Canon black cartridge prints poorly

The most commonplace reason a printer can stop printing in black is when the printer just runs out of ink. The computer may NOT inform the user about this problem. In this case, the Canon printer stops printing in black. What to do in this case? This, incidentally, applies not only to the models listed above, but also to all other printing equipment. If the device runs out of ink, you will have to install a new ink cartridge in the device or refill the old one. You can perform this procedure both independently and at a service center. Also, some models of printers require direct refilling of the cartridge using ink and a syringe. This procedure is most often carried out at home. After the cartridge is refilled, shake it slightly and check. If the printer still won’t print in black, the problem was not with the ink. If after refueling the problem has disappeared, then in the future you need to carefully monitor the remaining amount of ink.

In some cases, printers may refuse to print on the grounds that the ink was “inappropriately infused”. This can be associated with a host of problems. Quite often, the cause of the problem is a poorly performed refueling. What is it about? You may have had a bad seal on the cartridge or not fully inserted it into the equipment. Make sure the cartridge is in place. This is usually indicated by a slight click. If the ink was poured into the already inserted equipment, then you will have to take the adhesive tape and stick it tightly on the “injection site.” This can correct the problem. After completing the above procedures, you should try again to check the functionality of the equipment. Perhaps for some time now, problems with printing documents will no longer bother you. However, this does not always happen.

Why black sheets appear when printing and how to deal with it?

If the printer produces black sheets when printing, you should not immediately despair or give the device to a service center. You can try to fix the problem yourself at home. However, before proceeding with the “recovery work”, you must understand the reasons why the printer prints black sheets. There may be several of them:

  • OPC drum light. This is the most common reason. As you know, a photodrum (or photodrum) is a part of a cartridge to which information is transferred from a computer, laptop or other device. Information for subsequent printing. However, he is very sensitive to light. Therefore, all work related to the removal of this part is carried out in a dark room (sometimes toner replacement). Light accidentally hitting the drum can disable it, and this, in turn, can cause black sheets to appear. What to do in such a situation? Either replace the drum unit (since repairing it is too expensive), or wait a little. the sensitive layer may recover.
  • Contact part malfunction. For example, the contacts of the power supply on the cartridge itself are dirty. In some models, the spring-loaded contact begins to get stuck at all. It SIMply turns out 30-40 degrees due to improper operation. Let’s say the cartridge is often and unnecessarily pulled out of the printing device.
  • The wrong size paper is being used. For example, some users are trying to print on fax paper. However, it turns black when printed even due to slight heating.
  • Corotron missing. Perhaps you gave the printer to a service center for repair or changed the ink yourself. At the same time, during such work, they SIMply forgot to install the charge roller (aka corotrons or input shaft) back.
  • The high-voltage unit of the printer or other parts of it is out of order. Yes, you should not discount the printing device. The printer, like any equipment, can break down. The high-voltage unit breaks down especially often. It is not difficult to diagnose a breakdown of the printing device itself. If possible, try inserting the cartridge into a different printer. If there are black sheets, then the matter is in the device itself.
  • A low-quality cartridge is being used. Some models sin with their leaks. In total, some of the toner scatters, Marat and sheets during printing. Usually after a while, the printer starts printing normally. If, after 10-20 print sheets, black sheets continue to come out, then the cartridge should be replaced.

Why the printer can print black sheets

Today we’ll talk about another frequency problem that can arise when a printer or MFP is operating. We are talking about the appearance of black sheets when printing. Of course, this happens extremely rarely, but still some users are forced to struggle and try to somehow fix this problem. Therefore, we will talk about the reasons why black sheets appear, and what to do in such a situation.

Repair yourself or give it to a service?

As you can see, there are many reasons why black sheets appear when printing. However, they are all easily diagnosed and eliminated. It should be remembered that this error is more typical for laser printers. By the way, from any manufacturer. be it HP, Samsung or the same Canon. Nobody is insured when black sheets appear when printing. over, most often such an error is detected after refilling the cartridge or other manipulations with the device.

The actual question is whether it is worth immediately contacting the service center or is it better to try to restore the printer yourself. In our opinion, everything is obvious. You should try to eliminate the black sheets when printing yourself. It’s not difficult at all:

  • Check what paper is in the tray (to eliminate the possibility of using fax paper)
  • Clean the contacts (both printer and cartridge) and make sure they are working;
  • Try to restart the device;
  • Check if the cartridge is installed correctly, and if they forgot to put the input shaft, etc.

If you have done all of the above, but the printer continues to print, then you should contact the wizard for help. After all, most likely, the problem is quite serious. it went out of order:

  • Photo drum;
  • Power Supply;
  • Controller board;
  • Laser assembly or some other important detail.

Possible color rendering problems

There are several popular situations that cause problems with adequate color transfer to paper.

  • The printer prints in one color.

The essence of the problem is that the cartridges of a standard 4-color printer are divided into two blocks: black and color. That is, one cartridge contains black, and the other contains the other three, cian (cyan), yellow (yellow), magenta (magenta). During the printing process, colors are mixed with each other, creating all the desired shades. When a problem arises, the device prints in only one color, ignoring all others. For example, users may ask why the printer prints in red, or mixes together to print only pink or only green. This is because the cartridges for other colors may be clogged. It is also possible to work with one color if the cartridges are refilled incorrectly, the printheads are clogged or the jumpers between the cartridge containers are damaged.

  • Printer confuses colors.
READ  Paper Sizes For Printing On The Printer

This problem most often occurs in earlier models of devices due to the peculiarities of printheads or the installation of non-original cartridges or CISS. When the printer is idle, the print head moves to a position that prevents air from entering the nozzles to prevent ink drying out. During this time, the ink in the nozzles enters the print head, and during printing, colors may mix or change for a certain number of prints.

  • The product does not print one or more colors.

Most often, such problems can occur after prolonged inactivity of the device due to drying or thickening of ink. It is also possible to air the printheads after replacing one of the cartridges, or Incorrect printer perception of cartridges from different manufacturers.

  • Printer prints in black only.

When installed correctly and the cartridges are full, the printer can only print in black. Often this problem occurs at first use when the default Color is set to black in the printer driver.

Possible color rendering problems

There are several popular situations that cause problems with adequate color transfer to paper.

  • The printer prints in one color.

The essence of the problem is that the cartridges of a standard 4-color printer are divided into two blocks: black and color. That is, one cartridge contains black, and the other contains the other three, cian (cyan), yellow (yellow), magenta (magenta). During the printing process, colors are mixed with each other, creating all the desired shades. When a problem arises, the device prints in only one color, ignoring all others. For example, users may ask why the printer prints in red, or mixes together to print only pink or only green. This is because the cartridges for other colors may be clogged. It is also possible to work with one color if the cartridges are refilled incorrectly, the printheads are clogged or the jumpers between the cartridge containers are damaged.

  • Printer confuses colors.

This problem most often occurs in earlier models of devices due to the peculiarities of printheads or the installation of non-original cartridges or CISS. When the printer is idle, the print head moves to a position that prevents air from entering the nozzles to prevent ink drying out. During this time, the ink in the nozzles enters the print head, and during printing, colors may mix or change for a certain number of prints.

  • The product does not print one or more colors.

Most often, such problems can occur after prolonged inactivity of the device due to drying or thickening of ink. It is also possible to air the printheads after replacing one of the cartridges, or Incorrect printer perception of cartridges from different manufacturers.

  • Printer prints in black only.

When installed correctly and the cartridges are full, the printer can only print in black. Often this problem occurs at first use when the default Color is set to black in the printer driver.

Why does the printer print in red?

As a rule, the main problems that the printer users encounter in the process of work can be solved on their own with the correct diagnostics. There is a significant amount of potential color problems when the printer does not print colors correctly. It can be printing in one color, most often black or red, Incorrect mixing or confusion of colors. Sometimes the causes of problems lie not only in printer errors, but also in low-quality consumables, so you should pay attention to the selection of suitable ink.

Possible solutions

Ways to fix the problem why the printer prints in one color (epson) are quite SIMple and everyone can do it. First of all, you should clean the cartridges. With frequent refills, ink residues may accumulate as they are not used. To completely remove the remaining ink, you can use the holder for the cartridges or special latches, which are used during their transportation. If these steps are ineffective, you can clean the cartridges with hot water.

In the event that the printer prints the wrong colors, using the same cartridges and setting the corresponding color profiles for them will help. It is important to use cartridges from the same set from the same manufacturer, as cartridges for the same printer from different companies can differ significantly in design. In case of problems with the print head, cleaning it will help, so that all the air goes out through the special holes. First of all, it is necessary to perform a nozzle test, after which, based on the test results, determine the need for head cleaning or replacement of consumables. The same procedure applies when the printer ignores one or more colors. If the printer is printing the wrong colors, it could also mean that the cartridges are out of ink. Sometimes the product does not print a certain color, even if there is ink in the cartridge, but the ink level is below the minimum level. In this case, you need to refill the cartridge or replace it with a new one.

To set color printing as the default parameter, you need to select the desired tab in the driver properties and change the Color value from black to color.

As a rule, you can independently solve most of the problems in which the printer prints in a second color. Otherwise, you need to contact the service center for a more serious diagnosis.

As a rule, the main problems that the printer users encounter in the process of work can be solved on their own with the correct diagnostics. There is a significant amount of potential color problems when the printer does not print colors correctly. It can be printing in one color, most often black or red, Incorrect mixing or confusion of colors. Sometimes the causes of problems lie not only in printer errors, but also in low-quality consumables, so you should pay attention to the selection of suitable ink.

Possible solutions

Ways to fix the problem why the printer prints in one color (epson) are quite SIMple and everyone can do it. First of all, you should clean the cartridges. With frequent refills, ink residues may accumulate as they are not used. To completely remove the remaining ink, you can use the holder for the cartridges or special latches, which are used during their transportation. If these steps are ineffective, you can clean the cartridges with hot water.

In the event that the printer prints the wrong colors, using the same cartridges and setting the corresponding color profiles for them will help. It is important to use cartridges from the same set from the same manufacturer, as cartridges for the same printer from different companies can differ significantly in design. In case of problems with the print head, cleaning it will help, so that all the air goes out through the special holes. First of all, it is necessary to perform a nozzle test, after which, based on the test results, determine the need for head cleaning or replacement of consumables. The same procedure applies when the printer ignores one or more colors. If the printer is printing the wrong colors, it could also mean that the cartridges are out of ink. Sometimes the product does not print a certain color, even if there is ink in the cartridge, but the ink level is below the minimum level. In this case, you need to refill the cartridge or replace it with a new one.

To set color printing as the default parameter, you need to select the desired tab in the driver properties and change the Color value from black to color.

As a rule, you can independently solve most of the problems in which the printer prints in a second color. Otherwise, you need to contact the service center for a more serious diagnosis.

Damage to printheads

The first option, which is quite common. This is damage to the printheads in the printer. In this case, even a new cartridge will work with the equipment. True, it can be difficult to diagnose the problem.

Your HP 3525 printer does NOT print in black? Then it’s time to take your equipment to a specialized service center. Tell us about your suspicion of a head malfunction. If the “diagnosis” is confirmed, then you will be offered a choice of several options for the development of events. The first. Replacing a broken part (often malfunctions can be corrected), second. Buying a new printer.

Don’t panic. Damage to printheads is very common. And it’s not a fact that the HP printer does not print in black precisely because of this. If you first want to exclude SIMpler reasons, then you should postpone the visit to the service center for a while.

Clogging

The next scenario is great for home remedies. If the HP 5525 printer does NOT print in black, what to do. You don’t know, but you don’t want to carry the equipment (not only 5525, but also other models) to the service center, you can independently check what happened.

Try to print a test document. Did not work out? Although the settings show there is black ink in the printer? Then try using a dedicated printer flushing solution. Drop it on the printhead and wait a little. After cleaning up, try again. Happened? Then it is no longer necessary to puzzle over why the device does not print in black. HP or whatever. It does not matter. The main thing is that the problem is found and fixed.

But what if rinsing the head does not work? Of course, look for the reason for this kind of behavior somewhere else. Let’s try to figure out what else can cause this phenomenon.

Poor refueling

Sometimes, as practice has shown, printers refuse to print even after they have been “poured” ink of the corresponding color. In our case, black. This can be caused by a lot of problems. But often this is NOT anything else but a poorly performed process. What is it about?

You or you did not fully insert the cartridge into the equipment or poorly sealed the existing one. In this case, everything is fixed extremely quickly and easily. Insert the cartridge firmly into the printer. Until a light click. If you were “pouring” ink into the already inserted equipment, you will have to take adhesive tape and stick it tightly on the “injection” site. So you can fix the situation with the printer refusing to print in black.

After completing the steps, try to test the hardware operation. Often, for a while, you will no longer be bothered by problems with printing documents. But this does not always happen. Your HP 3525 printer does NOT print in black? What to do. Do not know? Then it is advisable to check some more rather interesting options for the development of events. And only then make a conclusion about the breakdown of the printer as a whole.

Drivers

The last reason the HP 5510 printer does NOT print in black (or any other model). This is a computer problem. In particular, drivers for printing equipment. In this case, it is best to reinstall them. Anyway, reinstall the drivers immediately after the first manifestations of problems with the printer.

READ  How To Insert Cartridge Into Printer Laser

After the action is completed, you will have to check your equipment. A test page will be printed. From it it will become clear whether the printer prints in black or not. Not very often, but reinstalling the drivers does help. Especially when the printer is brand new.

Nozzles

If the printing equipment is not used very often, but suddenly it stops working, try cleaning the nozzles inside. Indeed, very often the prerequisite for such behavior is Nothing more than drying paint on these parts. In this case, your printer HP does not print in black.

Don’t be scared. The nozzles are cleaned with alcohol and a cotton pad. Wipe them off and then let dry. Then start testing the printer. Users say that on most printing equipment, the nozzles have to be cleaned regularly. Otherwise, it will soon refuse to work.

It’s not that

Also, problems can be observed in the case of using low-quality printed materials. This also applies to ink and cartridges, and even paper. Often, the HP printer does not print in black due to incorrect selection of components for this venture.

To avoid problems, it is enough just to buy exceptionally high-quality materials, as well as components identical to those inserted into the equipment. If there is a suspicion that you have not bought something correctly, then it is enough to take the printer to a service center for diagnostics. There you will quickly confirm or refute the put forward theories. So to panic when the equipment does NOT print in black is not worth.

Sun paint

The most commonplace. This is when the printer runs out of ink at all. With all this, the computer may NOT inform the user about this event. Then the HP 5525 printer does NOT print in black. What to do? By the way, this concerns not only the listed printer models, but all printing equipment. When it runs out of paint or has already run out, you will have to collect it and install it in the device.

Quite often, the cartridge is SIMply replaced. This is done either independently or in service centers. In addition, some models of printers require direct refilling already. Installing the cartridge using a specialized syringe and ink. This procedure is carried out at home mainly.

After refilling the cartridge, shake the equipment a little and check. HP 5510 printer does NOT print in black (or any other model)? Then the reason is not at all in the paint. The problem is resolved? Great, keep an eye on how much black ink you have left.

Printer HP does not print in black. What to do?

Very often users are faced with the fact that the HP printer does not print in black. In truth, some people immediately panic. But you shouldn’t do that. Perhaps everyone who has a printer at all faces this kind of problems. But why is this happening? What to do in this case? Let’s try to understand our today’s unforgivable question.

Malfunctions and breakdowns

If your equipment is still within the warranty period, then take it to a service center. There you should be diagnosed with a breakdown and offered a new SIMilar printer or alternative options (cheaper or more expensive). As a rule, this is the only solution to the problem with a broken printer. A new model after setting it up on a computer will NOT give you any trouble.

Advice for the future. Timely clean the printer from dust and dirt, and also monitor the amount of ink in it. This will help avoid many situations in which the equipment stops printing in black.

The printer prints in red: solution to the issue

When the photos are not the same colors as on the PC monitor, figure out what the reason is in the hardware of the printer or in the software.

The printer prints with a red tint: 6 common reasons

In most printers with color printing, the cartridges are delimited by two blocks. black and color. When the second unit fails, the printer (Epson) prints in red.

The color palette of images is determined by the black cartridge and the variety of inks. basic (yellow, cyan, magenta) and their shades. When ink is mixed, color combinations are obtained. For example, green if you combine yellow and cyan, orange if you mix magenta and yellow. This is how all printing devices work: Canon, HP, Xerox, etc.

The ink flows through the nozzles (holes). If any of them gets clogged, the paint does NOT come out or comes in partially. The printer prints in red, green, or second color. This is the most common problem. But not the only one. Sometimes a device crashes if:

  • Incorrectly refilled cartridge;
  • Broken overlap between paint tanks;
  • Non-native ink is used;
  • Air enters the nozzles;
  • The paint thickens or dries.

Read below what to do in such cases.

The printer prints in red: why and what to do

Color order is NOT the same as indicated on the caret

Swap paint tanks.

Ink is NOT going to cartridge

  • Add ink to the CISS. If there is ink, it means that air has entered the cartridge or the CISS loop.
  • Remove air with a syringe.
  • Remove the cartridge assembly from the printing device and open the plug in the cartridge.
  • I pump out the air until the paint in the syringe stops foaming.
  • Close the plug and run the test.
  • Clean the print head with a utility or flushing fluid.
  • Clean the print head NOT more than two times in a row to avoid clogging the diaper meter. Maintain a 2 hour interval. this applies to the Epson printer.

    The integrity of the partitions between flowers is broken

    If the test is perfect: the nozzles are NOT clogged, and there is air in the system, and the printer still prints in red, then there are two reasons:

    • You are using consumables NOT recommended by the manufacturer without a corrective ICC profile. an auxiliary file for the printer.
    • ICC profile Not suitable for ink and paper used.

    An example from experience The Epson photo printer was printed on “native” paper of a photo of excellent quality. And on Lomond paper, it turned out reddish. And the point is this: Lomond paper also needs the Lomond ICC profile, because each type of paper has its own profile. With ink SIMilarly.

    Run a nozzle test

    Nozzles (nozzles) are holes in the print head of a printer. Having printed the test and compared with the standard, you will immediately see which colors print well, which ones with spaces, and whether the ink is fed into the print head in the correct order.

    Different models have their own way of checking. You can use the control buttons on the printer to test the nozzles (Nozzle Check). Or check through the driver in the following sequence: Start → Devices and Printers → Printing Preferences → Service → Checking nozzles (nozzles).

    If you see gaps in the color or it is NOT displayed at all, then the reason has already been found. Or partially found. Run nozzle cleaning and recheck. It is performed in the following sequence: Start → Devices and Printers → Printing Preferences → Service → Cleaning the Print Heads.

    Does the test match the benchmark? Excellent! If not, repeat the procedure one more time, after making sure that one of the ink colors has run out. To do this, use a special utility (in HP printers). Or through the printer driver. The procedure is as follows: tab “Service” or “Printing Preferences” → utilities Status Monitor 3.

    Epson printer prints with a red tint: how to apply an ICC profile

    First, make sure it is original Epson ink. It should be understood that Epson ink is not suitable for Canon or HP printers. Use either original or analogs with the appropriate ICC profile. The analog ink formula changes every ≈2 years. Accordingly, the ICC profile also changes, so stay tuned.

    Check printer operation in three steps.

    • Print the gray scale on Epson paper, without using an ICC profile. Printouts should be a pure gray, no reddish or second tint.
    • In Adobe graphics editor, set the ICC profile Recommended by the manufacturer for this type of paper. And in the printer driver, turn off color management (No Color Adjustment).
    • Print with the correct paper type selected in the printer driver. It must match the established ICC profile.

    See how to flush the Epson L modification

    Leave your opinion and wishes to the article “The printer prints in red: why and what to do”

    The most common causes and remedies

      • Low quality ink or compatible cartridges.

      If an inkjet printer does not print well in black or even prints in blue, then one of the most likely problems of such a defect is the use of poor consumables. Thus, incorrectly selected cartridges or the use of cartridges belonging to completely different kits can adversely affect the operation of the printer and MFP. The same applies to ink, which during the operation of office equipment can clog nozzles or thicken too quickly. The solution to the problem consists in a careful and competent selection of compatible cartridges, which you need to purchase only from trusted manufacturers. Also, in no case should you allow the SIMultaneous use of consumables from different manufacturers.

        • Low ink level.

        So, what to do if the device does not print in black, but the reason for the incorrect operation of the device is NOT due to incorrectly selected consumables? If the machine starts printing with color ink, then the possible cause of the malfunction is insufficient ink in the black cartridge. The fact is that some models of printing devices do not function well with consumables, the reservoirs of which are almost completely empty. It is in such a situation that the printer confuses colors or prints, but is very faint and indistinct. To eliminate the described cause, you just need to refill all practically empty cartridges or replace them with new ones. Then try printing a couple of test sheets on your printer.

        • Clogged vents or printheads.

        Another fairly common reason a printer stops printing black is clogged vents or the print head that is built into the consumable of the device. Thus, if the printer is not working properly for these reasons, then you should do the head cleaning. You can solve a problem of this kind by using the software method, by selecting the appropriate option in the device menu. But if the printer does not work as it should after that, you will have to resort to manual cleaning. Check also the vents of the cartridge, which can be clogged with all kinds of debris. To clean them, carefully pierce each of them with a pin after removing the ink cartridge from the turned off device.

        READ  How To Clear Jammed Paper From The Printer

          • Parking Hub Pump Problem.

          A possible reason that the printer has started to stop printing with black ink is the pump, which could eventually be forgotten. As a result, the device does not pump paints. You can eliminate this reason with the help of a conventional cleaning, pre-poured the required amount of flushing liquid or distilled water into the parking area. If water remains on the surface, then you will have to carefully disassemble the device and thoroughly clean the pump. But if the water has been pumped, then a completely different detail is a prerequisite for a print defect.

            • Clogged nozzles and channels with crystallized ink.

            There is one more very interesting point, which will interest all users of office equipment using refillable consumables. It consists in the fact that many paints, as a rule, are made on the basis of water. However, in expired products of this type, precipitation begins over time. Filtration of such paints is, of course, very expensive and time consuming. For this reason, some manufacturers add alcohol to expired ink to dissolve the sediment that has appeared in them. But alcohol also dissolves dirt, as a result of which the property of the coloring matter changes. If the printer, the cartridge of which has been refilled with ink with alcohol, will be idle for a long time, then the coloring matter begins to crystallize. The non-soluble crystals formed in this way can block both the channels and the nozzles of the device, which begins to stop printing in one color or another. Therefore, if your device does not print yellow, then crystals that clogged the channels with nozzles may become the cause of this malfunction.

            The inkjet printer began to print poorly in one color or began to confuse colors. We are looking for a solution to the problem

            Some users of office equipment sometimes have to answer the question of why the printer prints in red. If the device prints in some other color instead of black, for example, gray, then in general you can solve such a nuisance absolutely independently, and not resorting to the help of professionals.

            Other defects and their causes

            If a color printer confuses colors or prints in black, the control board or print head may be the cause of such a defect. To determine the specific cause, you need to test the head on another normally functioning device. After that, perform several cleaning cycles of this part, but if the cause is still not eliminated, then most likely the matter is not in the print head.

            It should also be added that on the contact pads of some printer models, the conductor may burn out over time. Damage to the contacts can also be the cause of a print defect due to the carriage being flooded with ink. The only way out of this situation is to repair in a service center, where you will be advised to change the carriage to a new one or to solder the tracks.

            A common problem is that a color printer prints in black and white. Its prerequisite is most likely a malfunction of the device control program. You can fix the problem by reinstalling it. It is also possible that its default settings are black and white and that is why the device does not print in color.

            If the device prints pink, then to solve this problem, you can first try to clean the cartridge nozzles using the appropriate function, which can be activated from the printer menu. Otherwise, you may need to purchase a new consumable.

            In general, as you can see, the causes of the malfunction are very diverse. Some of them are quite specific and depend on the printer model.

            Lack of ink or incompatible ink

            The first thing to start with analyzing the question of why it does not print black in the printer is to check the presence of a refill with black ink.

            To test this reason, it is recommended:

            • Inject a small amount of paint with a special syringe;
            • Test printing;
            • If the problem is resolved, then the black cartridge is refilled and further operated by office equipment.

            Also, the problem that the device has stopped printing may arise due to the incompatibility of different colors. Experimenting with different formulations and manufacturers leads to unpredictable consequences, including when the printer prints green. The consequences will have to be corrected by repeated flushing of all paint supply systems.

            Clogged printheads or dry nozzles

            In the case when the printer has stopped printing in black, you need to exclude the possibility of clogging the ink supply channels or the head itself.

            This is due to:

            • Dust getting into the system;
            • Drying of paint with infrequent use;
            • The presence of strangers is included in low quality consumables;
            • Incorrect selection of paint for a specific model of the device.

            The device does not print with color ink if the reason lies in the ink supply line of that color.

            The general procedure for cleaning the toner supply port is as follows:

            • Check the filling level through the printer settings;
            • Launch a test page to make sure a flush is needed;
            • Remove the printhead and wash it with a compound specially purchased for THESE purposes;
            • The applied composition will take effect in 10-20 minutes;
            • Dry the head and set it in place;
            • Select the head cleaning item in the soft menu for the printer;
            • Print a test page again, checking the result.

            If the device still does not print in black, the procedure for flushing the gaskets, head and silicone tubes must be repeated. Ink often dries directly into the color nozzle. To clean them from excess dye, you need to wipe the element with a Cotton swab or a piece of napkin dipped in alcohol. Items can be cleaned periodically for prophylaxis.

            There are a number of models, which more often than analogs are subject to these problems. For example, the 6525 often does NOT print in black due to the use of incompatible ink that thickens in the work areas.

            Poor refueling

            Buying a new cartridge is the easiest way to fix it when the device does not print in black and this is due precisely to problems in the ink. Refueling is very common, as it significantly reduces the cost of maintaining the operating condition of the device.

            But what to do if high-quality ink is selected, and the sheet remains white during printing?

            Troubleshooting can be as follows:

            • You need to pull out the cartridge and reinsert it until it clicks;
            • It is recommended to check the dye container for leaks. To do this, a hole from a syringe is glued to the tape;
            • Check functionality again.

            Despite the general principle of operation, the behavior of inkjet printers is different. The HP 3525 does NOT print when the cartridge is NOT fully inserted. At the same time, an error appears that the consumable is not defined (and not “not installed”).

            What to do if the printer stops printing in black

            In the process of working with office equipment, sooner or later, users are faced with the problem that the printer has stopped printing in black. This can happen both with an actively used device, and with equipment that has not been used for a long time. NO suspension from the manufacturer and the printing principle, breakage may occur and must be eliminated. Some operations can be performed independently, others require expensive consumables, expert advice or contacting a service center.

            • Damage to printheads
            • Clogged printheads or dry nozzles
            • Lack of ink or incompatible ink
            • Poor refueling
            • Disabling ink level control and zeroing the chip
            • Driver problems

            Disabling ink level control and zeroing the chip

            For users, and not ready to buy new consumables every time, the actual problem with control chips. For example, the epson printer does NOT print black due to incorrect reprogramming. In this case, the software will signal the lack of ink, even if the cartridge is empty. For example, the HP deskjet 2130 printer does NOT print if it refills.

            The new cartridge is equipped with a special chip that controls the dye level. This is done in order to exclude refueling and stimulate the purchase of consumables entirely. The level control function is a program that can be hacked. This is done by wizards or programs that can be downloaded. Also, if the HP printer does NOT print in black, you can purchase a new chip separately.

            Another way to resolve the issue with the chip if the HP deskjet 2130 printer does not print, for example, is to block some of the contacts.

            For this:

            • Take out the cartridge;
            • Find a block of contacts on it;
            • Break the top contact on the left side by sticking it with tape)
            • Insert the cartridge into the printer
            • Conducting regular print testing.

            SIMilar manipulations are carried out with the lower right contact, after which the adhesive tape is successively removed and all contacts are wiped with alcohol. The desired result. the device shows 100% paint charge.

            Damage to printheads

            If the printer stops printing in black, the problem may be mechanical damage or software errors. The most common print head failure in inkjet printers. The sequence of actions to identify and resolve such a serious breakdown is rather complicated.

            The first thing to do if such suspicions arise is to take the equipment to a service center.

            Only an experienced craftsman can make the final verdict on the presence of a breakdown and offer two ways to eliminate it:

            • Replace the part with a new one;
            • Does not waste money and time on repairs and purchase a new printer.

            The problem at the user level looks like this: the paper goes through the printer, but it does not print although there is ink. If during visual inspection burnouts and the passage of ink are visible on the head, then most likely the malfunction lies in the electrical participation of the device.

            Wear and tear on the nozzles that feed paint are common. If the printer does not print well for this reason, then you will have to pay for expensive repairs, while the print quality will still be reduced. Most often, problems with nozzles occur when using poor-quality paint containing abrasive particles.

            When gaps appear on the printed image instead of black, the problem may be a leak. It occurs due to air entering the ink supply channel or ink drying. Often this problem is solved by flushing the rubber seals. Only as a last resort do they start mechanical repair of the printheads themselves.

            Driver problems

            Reinstalling device drivers may also fix the printing problem.

            You can try to solve the procedure for Windows XP and later operating systems yourself:

            • The printer is removed from the device list;
            • All device management files are deleted from the Program Files folder;
            • The distribution kit of the latest driver for the required model is downloaded on the official website of the manufacturer.