The Printer Prints Only One Page

Print only picture from web page

To print only the image contained in the web page, we recommend opening the same image. To do this Right-click the image and select “Open Image in New Tab” or “Open Image”. When the image is displayed by itself, press Ctrl P on PC or Cmd P on Apple computer to start printing process, you can try these steps right now in the image below.

If you still cannot print

Some programs (often only older ones) may also use the keyboard print screen or the prt scrn key to print. If your program does not work with the previous steps, try pressing this key to print the document or file.

Finally, if you can find a print option but it is grayed out or you receive an error message, you are most likely having problems with the printer or its drivers.

Printer prints only one page

So, if we start to deal with our problem, when the printer prints only one copy. There are several solutions to resolve this error. I will start with the most obvious and SIMple ones, and if this does not help you, then you can try to fix the problem in less obvious ways, in which I will also tell.

When printed, it is saved to a file, not printed

A computer can have multiple printers installed on the computer. Some printers may act as a save to file or PDF function that saves everything printed to a file rather than to the printer. If you’ve installed any software with these capabilities, the default printer may have been changed. If you want to print, make sure you have selected the correct printer before you start printing. You can also change the default printer so that the correct printer is selected each time you print.

Change margins in Acrobat

Adobe Acrobat software. Another widely used graphics program because the PDF files it generates should look and print the same across multiple devices and printers. The easiest way to print full-page images is in Acrobat. Choose a paper size that is identical to your image or slightly larger. Click “File” and then “Print” to open the Print Dialog Box, and then click the “Size” button. Under Size, select Actual Size and then Print.

Disabling Mopier Mode

If your device does not print multiple copies and prints only one page, then quite often this is due to the fact that the “Mopier” mode is enabled in the settings of your device. What is this mode and why is it used?

Mopier mode reduces the amount of network traffic between the computer and the printer. Thus, the computer does NOT send each copy of your document to the printer separately (for example, if you have 100 copies set, each copy is sent to the printer as a separate “file”), but sends one copy of the document and “indicates” the required number of copies. However, such a document in the end takes quite a lot of space in the memory of the printing device and sometimes the printer or MFP may not have enough of this memory. In this case, the printer prints only one page of the document and ignores the rest. In this case, you must disable this mode.

How to disable “Mopier” mode?

  • Go to “Control Panel”, then “Devices and Printers”, right-click on the icon of your printer and select “Properties”
  • Go to the “Device Settings” tab, select the “mopier mode” subsection in the “Installable Add-ons” section
  • Switch the mode to “Off”, save changes

It was this method that helped me deal with the auto goods problem. Many old printers “sin” with a small amount of memory and later cannot print “bulky” documents with a large number of copies with the “Mopier” enabled. Also, this error may appear if you are using a print server (as in my case)

How to print a document, image, or other file

Updated: 06/18/2020, Computer Hope

Each file and document, as well as the programs used to open them, is different. Thus, we can only give a basic overview of the printing steps. These steps are general guidelines and may NOT apply to the document or file you are trying to print. However, many programs use the standard printing method.

“Printer setup

Even if all the settings in the document itself are correct, you may still find that your document does not Print without Borders, usually because there are default borders for each document in the printer driver, and as long as they are NOT will be resized, your document will be framed, or your program will tell you that you are trying to print a document that is too large for the page. To fix this, open Devices and Printers from the start menu, then Right-click your printer icon. Select Print Options from the pop-up menu, then VIEW the setting options provided by your print driver. This is usually called “Layout” or “Page Layout”. “After you clicked Layout, you should be able to manually set the margins to zero. For some printers, you may need to dig another layer and find the Advanced Setup screen to navigate to those settings. Newer printers, especially those focused on photography, MUST have an explicit setting for borderless printing. Click on it and then click “Print” to finish printing the document.

Print selected text

All browsers support the ability to print selected text. Select the text you want to print on the page and press Ctrl P on your PC or Cmd P on your Apple computer to open the print options. In the print settings window, choose from the available options “Selection Only” or “Selection”.

You may need to click Additional settings or Extra options. Before there is a choice.

MODS Grand Theft Auto V

The largest collection of mods for Grand Theft Auto V and GTA San Andreas

The product does not print copies of the document

Faced the problem that the HP printer prints only one copy of a page, and does not depend on how many copies are set in the settings when sending to print. It seems that the field with the setting, which indicates the number of copies of the document, is SIMply ignored by the printer (or its driver).

The printer uses the latest available version of the HP Universal Driver downloaded from the manufacturer’s website, so there was no point in updating the printer driver.

Clearing the printer’s print queue

If the previous methods did not help you and the printer still prints one page at a time, then you can try to clear the printer’s print queue. Usually it is found along this path:

Ie usually this is the path C: WINDOWSSystem32spool

You need to go to the folder and delete all files from it. In addition, you can download a bat-file, which will clear the printer’s print queue itself. It will be enough to run it as administrator and it will do the job for you.

Printer prints only one page

So, if we start to deal with our problem, when the printer prints only one copy. There are several solutions to resolve this error. I will start with the most obvious and SIMple ones, and if this does not help you, then you can try to fix the problem in less obvious ways, in which I will also tell.

READ  How To Insert A Cartridge Into An HP Deskjet Printer

Change the printer’s print processor

If turning off Mopier mode does not fix the problem of printing only one copy of a page, try changing the print processor of the printer.

  • In the printer properties go to the Advanced tab
  • Click on the Print Processor button
  • In the list of print handlers Change the current handler from HP to the standard print handler from Microsoft. winprint
  • Save changes

Convert text and graphic information from digital format to analog is a couple of trifles, just have a printer connected to your computer at hand. Alas, when sending data to print, sometimes you have to face various errors, one of which we will consider today. Imagine that you have an HP printer and need to print several copies of the pages of a document.

Here you run the function of sending to print, but instead of printing a specified number of copies, the printer prints only one copy. Everything seems to be in order with the printer, with the drivers too, although wait, the reason may just be hidden in the driver’s work. Sun, with the driver itself, most likely everything is also normal, update if you have the latest version installed, it is not necessary, and this is even more so if it is downloaded from the manufacturer’s official website. The cause of the problem is usually hidden in the Mopier driver mode.

This mode is used to save traffic between the printer and the computer. It works like this. When a user sends data to print, one copy of the job and one special parameter is sent to the printer, which indicates how many copies of the material should be made. Everything would seem to be correct, only for the correct operation of this mode, the printer must have enough built-in or disk memory. If there is not enough memory, and this is typical of many budget models of HP printers, the job is printed only as pages are received from the computer, which means that the printer itself without a pointer “from above” will NOT be able to repeat it.

The solution suggests itself.

For the printer to print the specified number of copies, you must turn off Mopier mode. To do this, start the Devices and Printers applet in the Control Panel and open the properties of the problem HP printer. In the window that opens, go to the “Device Settings” tab, find the “Mopier Mode” option in the list and Disable it.

After saving the settings, the printer should print the specified number of copies without problems (multiple copies of the same job will be sent).

Note: if the printer has a hard disk, do not rush to disable Mopier mode, check in the same settings section if you have the option “mass storage device” active.

If it is disabled, enable it and check printer operation.

And one moment. If disabling Mopier does not work, try replacing the printer’s print processor. To do this, open the “Advanced” tab in the printer properties, click “Print handler” and replace the HP branded with a standard Microsoft winprint in the list of handlers.

Today I will write in a problem that I personally encountered not so long ago, namely: the printer prints one page, while it ignores the number of specified copies to print, and prints only one. In this case, the problem occurred with the HP 1320 printer, however, it can occur not only with models and devices of this manufacturer. Usually in this situation, the user begins to delve into the settings of the program from where the print is made; reinstall drivers, etc. If he is not very versed in computer technology, then he calls the professionals who are NOT embarrassed to take a “decent” payment for their work. However, you can easily avoid losing your nerves and money and use my instructions. After that, the printer will stop printing one page or one copy at a time and will continue to work fully. The method for eliminating the problem is extremely SIMple, even an unprepared user can use it. If the problem persists, you can use more complex troubleshooting methods at the end of the article.

Disable Mopier Mode in HP Printer

In this case, you need to turn off Mopier mode.

  • Go to Control Panel. Devices and printers. Open the properties of the desired HP printer.
  • Click the Device Settings tab
  • Scroll down the list and in the Installable Options section find the Mopier Mode item and Disable it (Disabled)
  • Save changes.

After that, when sending several copies for printing, several identical specified copies will be generated and sent over the network.

In the event that your printer has an internal hard drive, but jobs from the local cache are NOT sent to print when Mopier mode is enabled, in the same section of printer settings, check if the option is NOT disabled:

Printer Hard disk. Not installed

Disabling Mopier Mode

If your device does not print multiple copies and prints only one page, then quite often this is due to the fact that the “Mopier” mode is enabled in the settings of your device. What is this mode and why is it used?

Mopier mode reduces the amount of network traffic between the computer and the printer. Thus, the computer does NOT send each copy of your document to the printer separately (for example, if you have 100 copies set, each copy is sent to the printer as a separate “file”), but sends one copy of the document and “indicates” the required number of copies. However, such a document in the end takes quite a lot of space in the memory of the printing device and sometimes the printer or MFP may not have enough of this memory. In this case, the printer prints only one page of the document and ignores the rest. In this case, you must disable this mode.

How to disable “Mopier” mode?

  • Go to “Control Panel”, then “Devices and Printers”, right-click on the icon of your printer and select “Properties”
  • Go to the “Device Settings” tab, select the “mopier mode” subsection in the “Installable Add-ons” section
  • Switch the mode to “Off”, save changes

It was this method that helped me deal with the auto goods problem. Many old printers “sin” with a small amount of memory and later cannot print “bulky” documents with a large number of copies with the “Mopier” enabled. Also, this error may appear if you are using a print server (as in my case)

Mopier Mode

If you open the contents of the.Prn file, which printer forms when sending to print, you can see the following useful information in the print settings (highlighted in yellow).

@PJL SET QTY = 2 number of copies @PJL SET PROCESSINGBOUNDARY = MOPY MOPY mode

After searching the HP forums, I found that the problem could be related to the Mopier mode enabled in the driver (stands for multiple original copy). This mode assumes a reduction in traffic between the computer and the printer, when when printing several copies of pages, only one copy of the job and the QTY parameter are transmitted to the printer, indicating how many times this job needs to be printed. But there is one BUT here. For this mode to work correctly, the printer must have sufficient internal memory or hard disk space to store the job. Many low-end HP printers (HP LaserJet 1160, HP 1200, HP 1320, and others) SIMply have this memory or not enough.

Therefore, the received job is immediately printed as a page is received from the computer, and the printer cannot print it again from its memory.

READ  Printer Prints Very Faint How To Fix

Removing the Printer and Installing a New Driver

So the printer is still printing one copy at a time? Try to remove the printer from the “Control Panel” and install the latest driver.

  • Go to “Control Panel”, then “Devices and Printers”, right-click on the icon of your printer and select “Uninstall”
  • Then download the driver for your printer from the manufacturer’s website and install. For HP, you can download the “HP Universal Driver”
  • Install the driver and check that this action fixes the problem

Disable Mopier Mode in HP Printer

In this case, you need to turn off Mopier mode.

  • Go to Control Panel. Devices and printers. Open the properties of the desired HP printer.
  • Click the Device Settings tab
  • Scroll down the list and in the Installable Options section find the Mopier Mode item and Disable it (Disabled)
  • Save changes.

After that, when sending several copies for printing, several identical specified copies will be generated and sent over the network.

In the event that your printer has an internal hard drive, but jobs from the local cache are NOT sent to print when Mopier mode is enabled, in the same section of printer settings, check if the option is NOT disabled:

Printer Hard disk. Not installed

HP printer prints only one copy of a page instead of multiple

Faced the problem that the HP printer prints only one copy of a page, and does not depend on how many copies are set in the settings when sending to print. It seems that the field with the setting, which indicates the number of copies of the document, is SIMply ignored by the printer (or its driver).

The printer uses the latest available version of the HP Universal Driver downloaded from the manufacturer’s website, so there was no point in updating the printer driver.

Mopier Mode

If you open the contents of the.Prn file, which printer forms when sending to print, you can see the following useful information in the print settings (highlighted in yellow).

@PJL SET QTY = 2 number of copies @PJL SET PROCESSINGBOUNDARY = MOPY MOPY mode

After searching the HP forums, I found that the problem could be related to the Mopier mode enabled in the driver (stands for multiple original copy). This mode assumes a reduction in traffic between the computer and the printer, when when printing several copies of pages, only one copy of the job and the QTY parameter are transmitted to the printer, indicating how many times this job needs to be printed. But there is one BUT here. For this mode to work correctly, the printer must have sufficient internal memory or hard disk space to store the job. Many low-end HP printers (HP LaserJet 1160, HP 1200, HP 1320, and others) SIMply have this memory or not enough.

Therefore, the received job is immediately printed as a page is received from the computer, and the printer cannot print it again from its memory.

Change the printer’s print processor

If turning off Mopier mode does not fix the problem of printing only one copy of a page, try changing the print processor of the printer.

  • In the printer properties go to the Advanced tab
  • Click on the Print Processor button
  • In the list of print handlers Change the current handler from HP to the standard print handler from Microsoft. winprint
  • Save changes

The printer began to print only half of the page. We are looking for a solution to the problem

If a printer or MFP prints half a sheet, then don’t rush to go to the service center, because any user who is familiar with the device and the settings of his office equipment can cope with this problem. In this situation, there are several obvious reasons, which you can read from the current article.

So, if your printer prints half a page, then the device cartridge first of all comes under suspicion, as in many other situations. Perhaps his bunker is almost empty. In order to make sure of this, you need to use a special function that is in the software of any modern printer. Thanks to it, you, and not by removing the cartridge from the device, can find out the Estimated level of ink or toner. But keep in mind that it is not always worth relying on this option completely, it often “cheats” and shows the wrong amount of the remaining dye. It is best to open your inkjet or laser printer and pull out the ink / toner hopper, then shake it lightly and reinsert it. If after that the printer was able to print a full-fledged test sheet, then the reason lies in the ending dye of the printer. It can be eliminated by replacing consumables or refilling it.

If the device does not print and the cause of this malfunction is NOT related to its cartridge, then the connection between the device and the personal computer may be of poor quality. Therefore, you should unplug the USB cable and connect it to each port on the PC system unit one by one. Choose the fastest and most powerful port so that the connection between the two devices is really stable and reliable. It would also be a good idea to inspect the cord. you may notice some external damage. Replace it with a new one if necessary.

If the problem is still not resolved and the machine still does NOT print documents to the end of the page, but only to the middle, then try cleaning its consumables. It is possible that after refilling it, it is clogged. The fact is that as the cartridge works, it gradually accumulates a large amount of dyes, which, in turn, can negatively affect the print quality.

If the machine only prints one half of the document when copied, the scanner may be the source of the problem. But this raises the question: why is this happening? The fact is that the device receives only part of the page due to the fact that its scanner has stopped. You need to check this component of the printer without a document inside and with an open lid. At the same time, click on the button responsible for starting the scan, after which you can see where the scanning ruler reaches. If you notice that it stops in the middle of the document, then the cause of the problem is definitely related to the scanner. To fix this problem, you need to have advanced technical knowledge in office equipment scanners, otherwise Contact any reliable center for the repair of printers, multifunctional devices, copiers and other SIMilar devices for help.

In addition, if the product does not print full page, the malfunction may be caused by improper assembly of the consumables in this product. THOSE. It could be assembled with a slight and almost imperceptible bias. In this case, the gap between the magnetic shaft and the drum on one side becomes slightly larger than on the other. To solve the problem, remove the pin from the right side of the cartridge and make sure that the hole that is located in the side cover of this part during assembly is completely aligned with the hole in the part where the photo cylinder is located. Only then can the pin be reinstalled.

In addition, a page may only be printed halfway due to an unexpected error occurring during operation. In this case, the device will automatically stop its work until the fault it found is not eliminated.

Incomplete printing when photocopying

It is necessary to check the health of the scanner located under the glass of the machine.

  • Lift the lid of the MFP.
  • If there is paper on the glass, remove it.
  • Press the copy button.
  • Monitor your scanner.
  • He must walk at a steady speed. Mark the area where the scanner stops for more than one second or stops working completely.
READ  Pantum M6500 Printer Writes No Cartridge

If you stop early, there is a chance of breakage. Only a specialist of the service center can repair.

Checking the connection

Incomplete printing may be due to improper connection of the printer to the computer device. Most often they are connected with a USB cable, so check its suitability first.

  • Disconnect the power.
  • Remove cable from printer and computer.
  • Reconnect to printer.
  • Plug the other end of the cable into one of the ports on your computer. You can try to insert in each port in turn.
  • Start the printer.
  • Check print quality.

Signal quality is checked when the printer is connected via Wi-Fi. To exclude Wi-Fi breakdown, you can try to print the document after connecting with a cable.

Improper installation or assembly after refueling

If the printer does not print completely immediately after refilling, and there is enough toner and all parts are working properly, the cartridge may have been delivered incompletely or crookedly. To remedy the situation, you need to open the lid, inspect the internals and, if the ink tank is not level, pull it out and reinstall it. When installed correctly, a characteristic click will sound.

If the laser printer cartridge is not assembled correctly, then there will be a large gap between the magnetic and the photo roll on one side, as a result of which the print on the page will reach the middle, dividing the image vertically. In this case, the cartridge is disassembled and reassembled, but this time more carefully and correctly. You can initially fix the pin, but this rarely helps.

Low toner or ink

Few printing devices inform the user in advance when the ink is low. In inkjet printers, the dye level can be determined using software, but when the device prints a document on half a sheet, it is safer to check manually.

  • Disconnect the printer from the mains to prevent electric shock.
  • Opening the cover on the front of the case.

You can try to reanimate the ink powder cartridge with a shake, but this will not be enough for a short time, and soon half-sheet printing will start again.

The Printer Prints Only One Page

Printer Eco-Mode

Some models include a save mode when the toner is low. In the preview, users see that a portrait page will be printed completely on the entire A4 sheet, and as a result, a reduced image in landscape orientation is obtained on paper.

You can also enable or disable toner saving in print settings.

In the window that opens, the settings may be called differently, depending on the operating system.

Dirty cartridge

If the printer begins to print an incomplete page, but there is enough ink in the cartridge, the reason may be dirty. Paint could get lost in the nozzles. Cleaning is done with rubber gloves. The table is pre-covered with old newspapers or waste paper. Prepared in advance with a special cleaning agent, cotton swabs or tampons.

  • Removing the cartridge from the printer.
  • Turning it over with the print head up.
  • Cleaning agent drips onto the surface of the head.
  • Wipe the surface with a sponge or cotton swab.
  • Repeat the procedure until complete cleaning.

The problem is in the drivers

Drivers can be damaged by accident by the user, by virus programs, or by unsuccessful automatic updates. The only solution to the problem is reinstallation. It is easier and more reliable to use the drivers from the installation disc. If there is a disc, the latest version of the software is downloaded from the printer manufacturer’s website or an update is made via Windows Update.

You can also get the update through the device manager by selecting the printer and through the context menu by clicking on “Update driver”.

Incorrect print settings

Most often, the printer prints only half of the page due to incorrect settings of the software used. Let’s consider how to fix the problem using the example of printing settings in a Word document.

    Opening a document with MS Word.

In new versions of the office suite, the margin settings are located in the “Layout” tab.

Method one: duplex mode

First, let’s look at duplex printing. Of course, it is not suitable for every user, as it requires a special printer model, but if you still have one, then you are lucky.

How to print two pages on one sheet The easiest method?

  • Open the document you want to print. It can be PDF or DOC, no difference.
  • In the application call the print menu. This can often be done by pressing the CtrlP hotkeys. If for some reason you did not succeed, you can name it by the Corresponding item in the menu called by pressing the “File” button in the program interface.
  • A window will appear in which you need to set the parameters for printing. First, identify the printer. If there is only one, it will be selected automatically.
  • Set all other parameters as you like.
  • Be sure to check the box next to the “duplex printing” line. It is often located on the top right side.
  • Click on the “OK” button.

Immediately after completing these steps, the printer will start working. However, you may notice that each page of the document is printed on both sides of the sheet. That is, you learned the first way, how to print two pages on one sheet.

Three ways to print two pages on one sheet

Nowadays, printing documents is quite a standard procedure. Almost every home has a printer along with a computer. But for some, the provision of this machine is quite costly, because when printing a huge number of documents, many sheets are taken. To get around this flaw, there is an opportunity to use one trick. This article will tell you how to print two pages on one sheet in “PDF” or “Word”.

Method two: print two pages on one side of the paper

Having a duplex printer is undoubtedly good, but what if you don’t have one? Then, to save paper when printing, you can do a little differently. Alternatively, you can print two document pages on one sheet. Now I will tell you how to do it.

  • Open the document to print in the program.
  • Call the corresponding menu in it. Recall that this is done by pressing the CtrlP keys.
  • Just like last time, select your printer.
  • Set all the parameters you need.
  • To implement the plan, it is imperative to enter the value “2” on the “Pages per sheet” counter. It is located in the “Document Options” category.
  • Recheck all entered values ​​and click “OK”.

Now you know the second method, how to print two pages on one sheet. Of course, He may not be suitable for everyone, since the font will be much smaller initially and, perhaps, it will be uncomfortable to read, but if the print is “for yourself”, then this is a great option.

Method three: how to print two pages on one sheet on both sides

There are situations when you just need to print a document so that its pages are located on both sides of the sheet. We found out that this requires a special printer. Or not? There is another option for how to do this, however, it is quite time consuming.

  • Insert the print sheet into the printer.
  • Open the document in the program.
  • Start the print menu.
  • Set all the options you want and be sure to print just one page of the document. In this case, the first.
  • Print the page.
  • Turn the printed sheet over and reinsert it into the printer.
  • Repeat all previous steps, only now feed the second page to print.

This method, how to print two pages on one sheet, has one huge drawback. if there are a lot of pages, then printing will take a long time. But if you just need to print a couple of sheets, then this method is ideal for saving paper in the printer.