The printer prints the same thing how to fix

Dirty or misaligned printheads

Your printer might print fuzzy, blurry, or other faint text due to dirty printheads. All modern printers have a self-cleaning mode that cleans the printheads and additional internal hardware used during the printing process. If you use your printer frequently or have used it for more than a year, we recommend running the printer cleaning function, refer to your printer documentation for details on how to run the cleaning function as it is different for each brand and model of printer.

Another problem with the printer hardware

Finally, if you have tried all of the above suggestions and continue to experience problems, your printer may have a hardware problem. Contact your printer manufacturer for additional recommendations and suggestions for repair or replacement.

Ink cartridge problems

If you have used the same cartridge for more than a few months, you can check the ink or toner levels. On most modern printers, you can check these levels using the software or the indicator light on the front of the device (see the user manual for details on indicators).

If you have used the same ink cartridge for over a year, it may dry out or the printheads may become clogged with ink residues. Although you can try cleaning the printhead, we recommend replacing the ink cartridge for best results.

Clearing the print queue

To stop completely, do the following:

Attention! Depending on the version of Windows installed, the item names may differ. But the principle is the same.

  • Start Menu. Control Panel
  • In the window that opens, select “Hardware and Sound”. “Devices and Printers”. “Printers and Faxes”. Here is a list of all once installed printing devices. Select the active printer / MFP (there is a green checkbox opposite it).
  • We click on the printer with the right button, in the menu that opens. “View the print queue”
  • In the window that opens, we see all the documents that have been sent to print. We delete them, clear the print queue.

printer, prints, same, thing

That’s it, now your device is ready for further operation.

prints the same document all the time HP Support Community

Some ideas to find this document.

The doctor may not find anything. Worth a try!

HP Print and Scan Doctor. Resolving Printing Problems

Software & Firmware Updated?

Printer software. uninstall existing software (optional)

If the software is already installed and you want (need to) uninstall it:

Control Panel Icon View Programs and Features

Scroll down, click and Uninstall software

Printer software. Installation

NOTE. When using USB, disconnect the USB cable. between the printer and the computer before starting the installation Connect the cable when prompted (near the end of the installation procedure).

Download, save and install the Full Featured Software for your operating system version

After installing the software Restart your computer and log in

NOTE. located in one or more locations (depending on printer / software / version)

Open the Printer Software and Drivers page

Scroll down and select Related Videos Click View All

Find and watch the related video

Printer home page. “What is your printer”

Drivers / software, videos, consultations, instructions, troubleshooting, manuals, product information, more

Open Printer Home

Scroll down and select Video Tutorials Click View All

Consider installing printer firmware

READ (if any) all instructions before installing the firmware

If / after installing the firmware, Restart your computer and login

Reminder: Firmware is only updated after the printer software is installed / running.

Is your printer connected to the Internet (like ePrint)?

If so, sign in to your HP Connected account and make sure your printer has an Allowed Senders list that only lists the accounts for which you want to access the printer.

Is your printer connected to a local area network (for example, “home network”)?

If so, make sure your network is protected with a wireless password so your neighbors can’t access your printer.

If so, the “job” may be the result of a hung program that prints the print job faster than you see it in the queue.

If the task takes some time and the computer knows about it, you can find it in the Task Manager Details

If the computer knows about the print job at all, you may be able to trace the source of the job.

Configure the print queue to “store” jobs. this way you will at least be able to see where the job comes from (owner / account).

Once you have configured the “save” jobs option, you can search for the printed job in the “Log and Track” event log.

Bits with instructions for saving jobs / viewing logs are included in the Dragon Document:

Reprint the print job. saving a job for reprinting later

Enables viewing of events. activity log and tracking

After you have configured the “save” jobs option and enabled “logs” in Event Viewer, turn on the printer and let it print at least one copy of the document.

Click Thumbs Up on the message to thank you!

Have you answered? Click the “Accept as solution” message. to help others find him.

Stopping the device

A document sent to work with a large number of sheets can cause a device failure, create problems in the form of idle ink consumption of the cartridge, sheets of paper. If this happened, then you can stop it in several ways.

  • The most effective is to turn off the device. This can be done with a button, pulling the power cable out of the socket, emptying the paper tray. this will also stop the operation.
  • Alternatively, you can disconnect the cable between the computer and the printer. But this will work if the document has not yet been sent to the memory of the printing device itself. After the connection is restored, the paper is returned, the work will resume.

Driver related problem

If the printer prints unreadable text or strange characters, there may be a driver issue. Download the latest drivers for your printer and install them. For a list of printer manufacturers and links to driver sections on their websites, see our Printer Driver Index.

Printing continues after the queue has been cleared.

Maybe this is the case. the queue is reset to zero (checked several times), the tray is full. the device starts to work in a frantic rhythm. Paper is removed. stops, added. continues to work. over, there are still no files in the queue. What to do, how to stop it?

READ  The printer only prints a test page what to do

Possible cause. a document that is too large in size has been sent, or many copies have been specified. And the window does not show the number of documents to be printed, since the device itself has a certain memory buffer where documents sent for printing are dropped. At the same time, they are deleted from the computer’s memory. they have already been printed for it, and the printer continues to execute the job. For him it is not canceled.

  • To stop the device, it must be restarted. We turn off the voltage supply, wait a few minutes, turn it on. If this does not help to stop printing, then restart the computer as well. We count down a few minutes, turn on.
  • If this has not cooled the desire of the device to work, then we resort to extreme measures. First, we check how much a fresh driver costs, and if necessary, update it through the manufacturer’s website. The second thing to do is to try to completely uninstall and then reinstall the printer.

Important! Install only the drivers from the disk attached to the device or take them from the manufacturer’s official website. This will greatly simplify the work, save you from many problems.

We have considered the simplest ways to deal with the incorrect operation of the device. If all else fails, contact the specialists.

Why does the printer print in stripes? Canon, Epson, HP

How many points are given for an essay in Russian

What to do if your printer prints the same thing.

Sometimes already installed drivers may become outdated or work incorrectly due to problems in the system. In this case, you will also need to download the current version of the drivers from the manufacturer’s official website and install. Then restart the computer.

If the printer does not work, then the problem may lie in a conflict between new and old drivers. The latter must be removed, but it is not so easy, so it is recommended to follow the instructions so as not to disrupt the operation of the OS:

  • Before using the printer software, disconnect it from the computer.
  • Next, remove the device from the system. To do this, go to the “Control Panel” and right-click on the desired device, in the drop-down menu select “Remove device”.

Now you have to work with the Command Line. Open it using the WinR keyboard shortcut, write the command and click “Ok”.

  • You will open a window with all Windows services, where in the list you need to find “Print Manager”. For the convenience of searching, it is recommended to use the document search, which is called by the CtrlF combination.
  • Left-click on this item, after which options for actions with this service will appear on the left side of the window, you need to select “Restart”.
  • Open Command Prompt again and type.
  • You will be transferred to the window responsible for printing settings. Go to the “Drivers” section at the top. Select the required driver, which will include the name of the printer manufacturer and its model in the name. If during the entire operation of the computer only one printer was connected to it, then there will be only one driver. Delete it.
  • Use the Command Prompt again by entering the command.
  • In this window, on the left side, select the “Print Management” section, expand the “Custom Filters” folder and go to the “All Drivers” folder. Here, by analogy with the 7th item, remove the required package by right-clicking on it and selecting “Remove driver package” from the menu.
  • In the same window, go to the “Print Servers” tab that opens in the left part of the window. In the submenu, go to the “Drivers” folder and follow the same procedure with the previous item.
  • Reboot your computer.
  • Now you can connect the printer and install the latest drivers from the manufacturer’s official website.

    The above manipulations help in most cases to get rid of problems with the impossibility of printing. If they did not help, then this may indicate serious problems or incompatibility of the device with your computer, in these cases only professional repair or replacement of the printer will help.

    reinstalling drivers

    In modern versions of Windows, Linux and Mac, all the necessary software for the printer is installed either in the background or from the electronic media that comes with the device. If during the first use the device does not work, then download the drivers from the manufacturer’s official website.

    Why Canon printer prints in stripes?

    Bus moscow yoshkar ola timetable alliance

    What to do when the printer won’t stop printing

    Hello, after refilling toner by the master. Canon MF printer. started typing in black and smearing duplicate texts. When refueling, the foreman recommended changing the drum and dispensing blade. But I said that everything was printing fine before refueling, and did not change. What could be the reason if everything was normal before refueling? When printing in color from an HP deskjet advantage ultra printer, the entire picture is in horizontal white stripes. And at the beginning of the sheet there are two dirty stripes. All parameters are set correctly. And the quality is the best, and the type of paper is chosen correctly. Everything is the same as before. But before everything was printed perfectly, and now with stripes. I don’t know how to place a photo here. Printing streaks. what to do? How to install a printer without a disk. The printer does not print after refilling the cartridge. How to find out the bitness of the operating system. How to print an image on multiple A4 sheets. Color laser printer with cheap consumables Selecting a Canon printer Miscellaneous Uninstalling the printer driver How to install a printer from a disk How to install a printer without a disk Stripes when printing. what to do? The printer does not print. what should I do? My network printer won’t print. what should I do? The printer does not print after refilling the cartridge How to set up the printer for printing over the network Dried cartridge. how to restore Service centers Add a new service center Service News. 1 Stripes when printing with an inkjet printer 1. Aligning the print head Press to enlarge. Encoder tape location Click to enlarge. Defective printing caused by dropping the cartridge. Unevenly set metering blade press to zoom in. Google LinkedIn Telegram WhatsApp Skype Reddit Tumblr Print by email. Hello, I need to replace the charge roller, metering blade and possibly the drum unit. Hello, HP laser jet is printing thin stripes at the same distance. Hello, you need to go to the service, wash your head or throw another head. The comment is not published immediately, it is awaiting moderation. Add a comment Cancel reply. Add a new service center Driver for Sharp MX-B Setting the printer color profile How to print a document in the form of a book How to install a printer without a disk 9. The printer does not print after refilling the cartridge 7. How to find out the bitness of the operating system How to print an image on several A4 sheets 2. Send to email address Your name Your email address jQuery document. Email verification failed, please try again. Sorry, your blog cannot share links to posts via email.

    READ  Cartridge Tk 1170 For Which Printer

    HP 2 won’t stop printing random characters / characters

    I have an HP II that started a continuous cycle of printing random characters and unusual characters immediately after sending it a print job that had to be rotated to fit the page. There are no codes, I canceled all print documents and even turned off the power, plus pulled out extra memory in the hope that it would “reset” or something like that, but after about 2 months of inactivity, it still does the same thing. I decided that he would print the job and end, but I let him work and he went through a few reams of paper and there was no end in sight. No two pages are alike, and most of the lines printed are one line, some characters, very few letters.
    Does this sound like a “resettable” problem or a major malfunction? I hate to lose this one, it is of little use.

    First, unplug the printer cable from the computer to the printer. Turn on the printer and see if it is printing anything or is already ready. If it’s ready, then the printer is okay and your problem is in the software. I would uninstall the printer from Windows if that’s what you are using and reinstall. If you are not using Windows or have a dos program, you will need to find the printq file and delete it, otherwise it will keep trying to print. Connect and see what happens. If it is not ready for use after disconnecting the cable, you may have a problem with formatting the printer.

    It does go into a ready state when the cable is disconnected, but printing continues anyway. Only when the cable is disconnected does it start each time with a page that says “@PJL ENTER LANGUAGE = PCL3GUI” and then continues with all the irratic characters, and only about a dozen characters per page.
    I’ve already tried uninstalling, rebooting and reinstalling before, and also tried this on a completely different computer as a fresh install, but the same thing continues. It starts to print as soon as the cable is connected to the computer and I tried a new cable too.
    Once started, the only way is to stop it. it is to disconnect it from the mains or disconnect the cable. Also, while printing, the display will still show “Ready” until the paper runs out.

    Clearing the print queue

    To stop completely, do the following:

    Attention! Depending on the version of Windows installed, the item names may differ. But the principle is the same.

    • Start Menu. Control Panel
    • In the window that opens, select “Hardware and Sound”. “Devices and Printers”. “Printers and Faxes”. Here is a list of all once installed printing devices. Select the active printer / MFP (there is a green checkbox opposite it).
    • We click on the printer with the right button, in the menu that opens. “View the print queue”
    • In the window that opens, we see all the documents that have been sent to print. We delete them, clear the print queue.

    That’s it, now your device is ready for further operation.

    Printing continues after the queue has been cleared.

    Maybe this is the case. the queue is reset to zero (checked several times), the tray is full. the device starts to work in a frantic rhythm. Paper is removed. stops, added. continues to work. over, there are still no files in the queue. What to do, how to stop it?

    Possible cause. a document that is too large in size has been sent, or many copies have been specified. And the window does not show the number of documents to be printed, since the device itself has a certain memory buffer where documents sent for printing are dropped. At the same time, they are deleted from the computer’s memory. they have already been printed for it, and the printer continues to execute the job. For him it is not canceled.

    • To stop the device, it must be restarted. We turn off the voltage supply, wait a few minutes, turn it on. If this does not help to stop printing, then restart the computer as well. We count down a few minutes, turn on.
    • If this has not cooled the desire of the device to work, then we resort to extreme measures. First, we check how much a fresh driver costs, and if necessary, update it through the manufacturer’s website. The second thing to do is to try to completely uninstall and then reinstall the printer.

    Important! Install only the drivers from the disk attached to the device or take them from the manufacturer’s official website. This will greatly simplify the work, save you from many problems.

    We have considered the simplest ways to deal with the incorrect operation of the device. If all else fails, contact the specialists.

    stopping the device, clearing the print queue

    If you are faced with a problem. a relatively new, modern model, the printer prints one document all the time and is not going to stop, does not respond to pressing the buttons, you need to try to figure it out yourself or contact the wizard.

    READ  Print coloring on a printer for girls

    Reference! It is quite difficult to immediately determine the cause of the malfunction. There can be many reasons for each problem. And in order to be guaranteed to find it, you need to go from simple to complex. Let’s understand why the printer constantly prints the same thing and how to fix it.

    prints the same document all the time HP Support Community

    Some ideas to find this document.

    The doctor may not find anything. Worth a try!

    HP Print and Scan Doctor. Resolving Printing Problems

    Software & Firmware Updated?

    Printer software. uninstall existing software (optional)

    If the software is already installed and you want (need to) uninstall it:

    Control Panel Icon View Programs and Features

    Scroll down, click and Uninstall software

    After uninstalling the software Restart your computer and log in

    Printer software. Installation

    NOTE. When using USB, disconnect the USB cable. between the printer and the computer before starting the installation Connect the cable when prompted (near the end of the installation procedure).

    Download, save and install the Full Featured Software for your operating system version

    After installing the software Restart your computer and log in

    NOTE. located in one or more locations (depending on printer / software / version)

    Open the Printer Software and Drivers page

    Scroll down and select Related Videos Click View All

    Find and watch the related video

    Printer home page. “What is your printer”

    Drivers / software, videos, consultations, instructions, troubleshooting, manuals, product information, more

    Open Printer Home

    Scroll down and select Video Tutorials Click View All

    Consider installing printer firmware

    READ (if any) all instructions before installing the firmware

    If / after installing the firmware, Restart your computer and login

    Reminder: Firmware is only updated after the printer software is installed / running.

    Is your printer connected to the Internet (like ePrint)?

    If so, sign in to your HP Connected account and make sure your printer has an Allowed Senders list that only lists the accounts for which you want to access the printer.

    Is your printer connected to a local area network (for example, “home network”)?

    If so, make sure your network is protected with a wireless password so your neighbors can’t access your printer.

    If so, the “job” may be the result of a hung program that prints the print job faster than you see it in the queue.

    If the task takes some time and the computer knows about it, you can find it in the Task Manager Details

    If the computer knows about the print job at all, you may be able to trace the source of the job.

    Configure the print queue to “store” jobs. this way you can at least see where the job is coming from (owner / account).

    Once you have configured the “save” jobs option, you can search for the printed job in the “Log and Track” event log.

    Bits with instructions for saving jobs / viewing logs are included in the Dragon Document:

    Reprint the print job. saving a job for reprinting later

    Enables viewing of events. activity log and tracking

    After you have configured the “save” jobs option and enabled “logs” in Event Viewer, turn on the printer and let it print at least one copy of the document.

    Click Thumbs Up on the message to thank you!

    Have you answered? Click the “Accept as solution” message. to help others find him.

    Stopping the device

    A document sent to work with a large number of sheets can cause a device failure, create problems in the form of idle ink consumption of the cartridge, sheets of paper. If this happened, then you can stop it in several ways.

    • The most effective is to turn off the device. This can be done with a button, pulling the power cable out of the socket, emptying the paper tray. this will also stop the operation.
    • Alternatively, you can disconnect the cable between the computer and the printer. But this will work if the document has not yet been sent to the memory of the printing device itself. After the connection is restored, the paper is returned, the work will resume.

    Solved: how to cancel a print job that keeps printing the same HP Support Community

    Your actions depend on what is printed.

    If you see advertisements / spam about your printer, you need to secure your network so that these people cannot use your printer.

    Unwanted flyers or printer ads

    If the print job is one that you identified as submitted earlier, the job may get stuck in the queue.

    Print jobs are stuck in the print queue (Windows)

    Print jobs are stuck in the print queue (Mac)

    Stop print service, clear print folder, start print service

    Control Panel Icon View Administrative Tools Tools Services

    Scroll down to find, Right Click and Stop Print Spooler Service

    Open File Explorer (formally Windows Explorer)

    Go to the folder and Delete files from C: \ Windows \ System32 \ spool \ PRINTERS

    Start the print spooler service

    Reference materials and resources. places to find help and information about your 9001 printer 6

    Printer home page. “What is your printer”

    Drivers / Software / Firmware updates, videos, bulletins / notices, how-tos, troubleshooting, user manuals, product information, and more.

    Thank you for participating in the HP Community Forum.

    We. global community of HP enthusiasts. committed to supporting HP technologies.

    Click Thumbs Up on the message to thank you!

    Have you answered? Click the “Accept as solution” message. to help others find him.