To which ios can you update the iPhone 6

How to roll a pre-loaded custom firmware

On iPhone models from version 7, installation of an operating system other than iOS is available. The network contains variants of iPhone firmware for Android, but most are “raw”, regularly giving errors and malfunctioning. Therefore, it is not recommended to use a system other than iOS.

Connect the charger

Installing an update consumes a lot of battery power. In order to avoid errors due to interruption of the installation process, it is recommended to ensure a sufficient charge level. the optimal value is considered to be over 50%. For convenience and increased reliability, it is recommended to connect the device to mains power.

Reflash device

Installing a new version of the system by flashing the device requires special skills and knowledge, so it is better to entrust this method to a specialist. Before performing the procedure, it is recommended to create a BackUp, which will allow you to recover data in case of problems during operation. Then you need to find the required version of the system. the “.ipsw” file (they can be found on special forums and sites on the network). To avoid an error in iTunes, you need to disable the “Find iPhone” function in the device settings.

Once the preparation is complete, you can start running the installation. To do this, you need to connect the switched off device to the computer, while holding down the “Home” button. As a result of this action, the recovery process will start, and a message will appear in the window that opens that “You need to restore the iPhone before using it in iTunes”.

After confirmation by clicking the “OK” button, an iTunes window will open on your computer. Holding down the “Shift” button, select the downloaded file with the system firmware in the explorer and start the download and installation process. During the update, the device will reboot several times. it is necessary to leave the iPhone connected to the computer until the end of the installation.

Connect to your home Wi-Fi or unlimited LTE internet

The duration of the system update depends on the speed and reliability of the signal of the Internet connection. In addition, the volume of the downloaded file is more than a gigabyte, and the total amount of spent traffic can reach 3-5 GB. Therefore, before starting, it is recommended to connect to your home WI-FI or unlimited Internet.

How to install a new software version without backup

To update your iPhone without a forced backup, we recommend using the PC-assisted installation. To do this, make sure iTunes is closed before connecting the device. Then, depending on the operating system used, open a terminal or command line, enter the following command:

  • for Windows:% CommonProgramFiles% \ Apple \ Apple Application Support \ defaults.exe “write com.Apple.iTunes AutomaticDeviceBackupsDisabled.bool true
  • for macOS: defaults write com.Apple.iTunes AutomaticDeviceBackupsDisabled.bool true

As a result, updating the iPhone via iTunes will be available without backup.

Is it possible if SIM does not work

You can update the device system even if there is no working SIM card in the slot. You only need to provide an Internet connection. via WI-FI or USB cable.

Is it possible to start the process on charging

It is allowed to start the download and installation of the system update when the mains power is connected. in addition to maintaining the charge level, this will allow you to get a charged phone after the installation is completed.

How to downgrade to a previous version of iOs

If it becomes necessary to return to the old version of the system, this can be done in two ways. either restore the previously saved version, or install the downloaded distribution kit of this version via DFU mode or by flashing the device. In the first case, to restore, you need to use a computer with iTunes installed.

Restore or update firmware on iPhone 6

What is iPhone 6 Firmware Recovery or Update? First you need to understand the very concept of firmware. This term refers to the firmware of the device. In other words, firmware is an operating system. In the case of the iPhone 6 and other models of this phone, we are talking about iOS. In addition, this operating system is used in other Apple products. For example, iPod Touch players and iPad tablets also use iOS. iPhone Operation System.

The process of flashing a smartphone can consist of one of two operations: either restore or update iOS. For clarity, many users and specialists use the term flashing, which combines both procedures in its name.

Updating iPhone from Computer via iTunes

To perform this operation, you need to connect your phone to a PC with a USB cable and open iTunes. Then in the “Devices” menu, select your own iPhone 6, and on the tab for synchronizing the phone with the utility, click on “Update”. Then you need to confirm the start of the operating system update procedure. In addition, to save time, you can download the file with the required iOS version to the local disk of your computer in advance, and then, when you click Update, hold down the Shift key on your keyboard. For users of Mac operating systems, the “AltUpdate” combination will be relevant. After completing the procedure, the iOS version will be updated to the required one, and all files, personal information of the user and settings will remain unchanged on the internal memory of the phone.

IPhone flashing options

IPhone 6 firmware can be flashed in two ways. At the same time, one first method is a universal option that is suitable for both recovering and updating iOS. The second flashing option can be used only when updating the operating system. So, they share the iPhone 6 firmware using iTunes utility and update using Wi-Fi connection.

How to Update iPhone 6 on ios 14 || How to Install ios 14 Update on iphone 6 and 5s����|| Part 2

In the first option, you need to download the desired iOS edition to your personal computer or laptop, and then install the built-in software on your phone using the Apple iTunes branded application. This method is suitable for iOS up to and including version 4.3.5. For newer firmware, you can use the second method, which is updating iOS using internet and Wi-Fi.

Differences between iPhone recovery and updating?

Both restore and update iPhone 6 are operations with the built-in software of the smartphone. In the first option, all data will be deleted from the phone, including photos, videos, phone book contacts, audio files, calendar information, and the like. In addition, the device settings will be reset to the default factory settings. Roughly speaking, restoring the iPhone 6 is about bringing the phone to the state it was in after it was released from the assembly line. But, at the same time, after recovery, the device will have the latest clean version of iOS.

During the iPhone 6 update, there is a transition to newer built-in software. In this case, the content of the phone, personal information and settings specified by the user will remain on the device, and iOS will be updated to the latest current edition.

Summing up this part of the material, it can be highlighted that the fundamental difference between recovery and updating iOS is one. in the first case, all data from the phone is deleted, and in the second, it remains.

Apple users already know that the iPhone 6, like other iOS devices, can be in multiple modes. These include Normal Mode, Recovery Mode or Recovery Mode, and Firmware Upgrade Mode or DFU Mode. To restore or update an iPhone, you can use any of the three named modes of operation.

IPhone update

As mentioned above, there are two ways to update the iPhone 6. The first of them is a procedure that is almost completely identical to restoring a phone. This process also uses the iTunes application. The second method is implemented through an Internet connection via Wi-Fi without using a personal computer or laptop.

Is it possible to reset iPhone settings without updating the operating system?

When it comes to restoring iPhone 6 using iTunes, as a result of the procedure, the owner receives a phone with the latest version of iOS firmware. Thus, there is a complete update of the built-in software, which is not always necessary for device users. For example, flashing a phone previously locked for a specific mobile operator will result in the loss of unlocking. The device will stop working with all SIM cards. An exception will be the cards of one single operator, under which the iPhone 6 was originally blocked. Use of the “SemiRestore” application can help to avoid such results, but this will be discussed in detail in another article.

READ  How to make Instagram black on iPhone

How to Recover iPhone from Recovery Mode and DFU Mode?

The process of flashing iPhone 6 from “Recovery Mode” or DFU-mode is absolutely the same, if you do not take into account the need to transfer the phone specifically to one of these two states.

After switching to the required mode, you need to connect the phone to the computer using a USB cable and open the iTunes utility. The app will detect the iPhone 6 in recovery mode. After that, click on the “Restore” inscription on the screen, while holding down the “Shift” key on the keyboard (Mac users must press and hold the “Alt” key). Now all that remains is to set the path to the firmware file with the extension “.ipsw” on the local disk of the computer and click on “Open”. ITunes will do the rest of the work itself, and the user will only have to wait until the procedure is completed.

IOS 13. Released. How to update iPhone and iPod touch. “over the air” and via PC

Apple has released the final version of iOS 13 for supported iPhone and iPod touch models. The update is now available for download and can be installed over the air or through iTunes / Finder.

Which iPhone, iPad, and iPod touch models support the update

As a reminder, the iPad is now being updated separately from the iPhone and iPod touch. The system that is installed on tablets is called iPadOS and will be released on September 30.

How to update to iOS 13

First, free up some space. Upgrading to iOS 13 weighs up to 3.1 gigabytes depending on the device, which means that your device must have at least 3.5 gigabytes of free space.

Second, create a backup. Before installing the update, organize a full backup of the system, applications and your personal data. This can be done using iCloud in device settings or using iTunes / Finder on your computer. When creating a backup from a PC, Safari bookmarks, mail accounts, notes, call history and calendar events will be additionally saved.

Updating to iOS 13 through settings

Step 1. Go to “Settings” → “General” → “Software update”;
Step 2. Wait for the update to appear and click “Download”;
Step 3. To start the update, click “Install”. You can also tap Later and choose Remind Me Later or Install Tonight. If you chose the latter option, just put the device on charge before going to bed. it will update automatically.

Updating to iOS 13 via computer

which, update, iphone

Step 1. Make sure you have the latest version of iTunes installed on your computer. In the case of macOS Catalina, you’ll have to use the Finder;

Step 2. Connect your device to your computer, open iTunes / Finder and select your device in the left menu;
Step 3. Download the iOS 13 image for your device from this site (when it appears there);
Step 4. Press the “Update” button while holding down the Option (Shift) key and select the iOS 13 firmware downloaded earlier;
Step 5. Confirm the installation and wait until the end of the procedure;
Step 6. Settings gadget from scratch or restore the created earlier backup. only suitable with iOS 12.4.1 or earlier.

How to downgrade from iOS 13.1 beta to the released iOS 13

Step 1: Download the firmware file: select the desired section (iPhone, iPad or iPod touch), click on the model of your device and download iOS 13 (or 12.4.1);
Step 2: Connect your iPhone or iPod touch to your computer using the supplied USB cable and open iTunes / Finder;
Step 3: Now you need to put the device into DFU mode. If you own an iPhone 7 and 7 Plus or iPhone 8 and 8 Plus, then read this guide, and if you have an iPhone X and newer, follow this guide. For older iPhones, follow these steps:

  • Connect your device to your computer;
  • Turn off the device;
  • Now press and hold the “Power” button for 3 seconds;
  • Then hold down the “Home” button without releasing the “Power” button for 10 seconds;
  • Release the Power button but continue to hold the Home button until iTunes notifies you that the device is in recovery mode;
  • In the appeared click on the “Ok” button.

Step 4: Press and hold the Alt / Option key on a Mac computer or the Shift key on a Windows computer, and then select “Restore iPhone” (iPod touch);
Step 5: In the window that appears, specify the path to the previously downloaded iOS 13 firmware file. IPSW;
Step 6: Select “Repair and Update” and follow the instructions on the screen;
Step 7: iTunes will check the firmware file and install it on the device. The process will take about 10 minutes;
Step 8: After the rollback process is complete, the device will display “Hello”. After completing the system configuration process, you can restore data on the device from a backup or configure the system from scratch.

Checking compatibility. The easiest way to update

First, you need to make sure that your device supports the latest generation operating system, and then decide whether to update the iPhone-6. Like the version released before iOS 12, they are only compatible with 64-bit mobile phones. Which means that 32-bit, for example, “iPhone-5”, according to the technical specifications, will not launch this update. For 5S models, the iOS 12 platform is available, but it does not function in the best way. But starting with the generation “iPhone-6”, the installation of the latest version is quite possible.

There are many ways to download and install the software. The simplest of them allows you to save your data and does not require much effort. To do this, find and open the “Settings” tab in the device applications, then click on “General” and select “Software Update”. If the download of the new version is available for the phone, it will be displayed as iOS 12. It is enough to start the process using the on-screen prompts, and the program will automatically download and install on the mobile device. At this time, the user just needs to wait and do not turn off the device, do not interrupt the installation. The user also has the option of deferred update. A person can choose at what time the system will automatically install the firmware.

How to update “iPhone-6”: the need to update, simple methods, instructions

With the release of a new generation of smartphones, as a rule, its operating system is also updated, which is developed taking into account modern technologies and user needs. But this does not mean that it is imperative to change the mobile device, it is enough to reflash it to the latest version. The article will consider how to update “iPhone-6″ and what problems a user may face.

Updating with Recovery Mode and DFU

Using these methods is almost the same as working with iTunes. However, it takes a longer period of time, since first of all it is necessary to enter the device into one of these modes. How to update “iPhone-6” in this case? This is done as follows:

  • The phone is entered into Recovery Mode or DFU.
  • Connect the device to a laptop or computer using a USB cable.
  • Launch iTunes, which will automatically detect iPhone in recovery mode.
  • Open the firmware file.
  • Waiting for the process to complete. Then the program will automatically do everything.
which, update, iphone

Updating via Wi-Fi

The use of this method is primarily convenient because it does not require a connection to a computer. To update “iPhone-6”, you must adhere to the following instructions:

  • Enter the “Settings” tab in the mobile device and click on the “Update” line.
  • Select “Download” and “Install”, if the program prompts you to accept the system conditions, you must agree and wait for the update process to complete.

It is worth noting that with a low signal level, the operation will either take a long time, or it will fail to download. After this method of updating, all information in the phone will be saved and not a single file will be damaged. At the same time, such an update is highly discouraged for locked phones.

ITunes sync and update

How to update iOS on “iPhone-6” through the program? Let’s take a closer look at the sequence of actions:

  • When you connect your iPhone to your computer, iTunes should start automatically, if this has not happened, it is activated manually.
  • First and foremost, it is important to make sure that the latest version of the software is loaded in iTunes. To do this, check the “Update” tab on Mac computers or “Check for Updates” in the iTunes menu for Windows.
  • If these features are not available, you need to check for updates in the Microsoft Store app. Then you need to sign in or create your account with Apple.
  • You must hold down the Option key on Mac or Shift on Windows to proceed with the update.
  • After that, the “Update” or “Check for Update” function will appear on the iTunes screen.
  • Select the downloaded IPSW image and click “Open”.
  • After the update is complete, the program will automatically restart the iPhone.
READ  How to turn off parental controls on iPhone

ICloud backup

Before updating “iPhone-6”, experts advise to make a backup. This will help “iCloud”.

When connected to iTunes, the “iPhone” icon pops up, you need to click it and make sure that “Summary” mode is open. Data copying can be done using iCloud. To preserve activity and health data, it is recommended to use the encrypted option.

Before updating the mobile device, model 6 is required to create a backup via “iCloud”. This is done as follows:

  • The mobile device is connected to an available Wi-Fi network.
  • Opens the “Settings” tab, then select a name and click on the line “iCloud”. If using iOS10 or older, scroll down the menus and select the appropriate icon.
  • Activate iCloud or “Backup”.
  • Then come back “Back”.

To make sure that the backup check is complete, open the “Settings” icon, choose your name and go to “iCloud”, then in “Manage storage” select your mobile device in the list.

Upload IPSW file

If the easiest way to update your DO iOS 12 phone is to launch the software through Settings, there is another effective method. download the IPSW file. You can install the file into your phone via iTunes, it is classified as Golden Master. To answer the question whether it is possible to update the iPhone-6 in this way, it is worthwhile to figure out what the Golden Master is.

Golden Master (GM). this is a beta version developed for iOS devices. It enables users to report problems that are affecting the latest version of the operating system. Allows developers to identify and fix bugs, correct them before the final release.

Initially, it so happened that the assembly of the Golden Master is no different from the final version, which comes out later. Therefore, installing the update on “iPhone-6” in this way does not affect the quality of the device in any way.

You need to download the IPSW file depending on your phone model. It is worth recalling that the safest way to download files is directly from Apple’s servers. This is the only way to guarantee the safety and preservation of the device’s functionality. After downloading the file to the computer, the mobile device is connected to iTunes and using the downloaded IPSW, the firmware is updated to iOS 12.

How to Update iPhone 6 on ios 14 || How to Install ios 14 Update on iphone 6 and 5s����||

Latest iOS version for iPhone 5s and 6

Apple stopped supporting the fifth and sixth generation iPhones with the release of iOS 12.4.1. That is, this is the maximum version of the operating system that can be installed on 5, 5S, 6 and 6 plus.

You can see which iOS the phone has been updated to in the settings by going to the “General” section, followed by “About this device”. The current firmware will be indicated opposite “Version” or “Software Update”. If it is lower than 12.4.1, then in the same tab “Basic” there is an item “Software Update”, where you can reflash the gadget to the latest supported version.

Important! The current list of smartphones that can be upgraded to version 13 starts with iPhone 7 and up. iPhone SE is also supported.

iOS 12 was the last for the fifth and sixth generation iPhones

How to upgrade to iOS 13 iPhone 6 or higher

It’s no secret that the software of Apple gadgets evolves accordingly with their filling. In 2019, with the release of iPhone 11, developers from Cupertino presented a new version of the operating system, which, according to their statements, became revolutionary for the company. How to update iPhone 6 to iOS 13, as well as 5th generation gadgets, below.

How to upgrade iPhone 7 and above to iOS 13

Now it’s time to download iOS 13 to a gadget that can handle the firmware requirements. As stated above, iPhone 6S and 7 are the oldest Apple phones to support the new software.

Important! It is best to back up your device before proceeding with the update. This will protect the user from crashes during the installation, or simply allow you to return to the old firmware if the new version is not to your liking.

  • Go to gadget settings.
  • Go to the first section.
  • Select iCloud.
  • Click on the item “Backup”.
  • Activate all sliders and wait a few minutes while the system archives data.

In order not to lose your data in the event of an update failure, it is better to use a backup.

  • Connect iPhone 7 to PC.
  • Open the program and wait for synchronization.
  • Click on the icon of the connected gadget (above).
  • Next, click on the section “Automatic creation of copies”
  • Select “This PC”.
  • Click “Create a copy now”.
  • Wait for the end of the process.
which, update, iphone

Now you can safely upgrade without worrying about a bad outcome.

ITunes backup can be saved to PC files

To install iOS 13 on iPhone 7, you need:

  • Go to the “Settings” menu.
  • Click on “Basic”.
  • Followed by “Software Update”.
  • Wait until the system scans the device and the “Download” button appears. Click.
  • Select “Install” in the pop-up window. At this point, the system will prompt you to install later or at night. Better to choose the second option, as the update usually takes about an hour.

Note! The presence of the Internet during the update is strictly required.

If the installation was moved overnight, it remains only to put the phone on charge before going to bed. In the morning it will already be updated to the latest up-to-date version.

You can find out that a new version of the OS is available in the “Software update” section

You can also update iOS to version 13 via a computer. But it’s important to note that only Apple’s PC will work for this. The instruction is as follows:

  • Install the latest version of iTunes (if Catalina is installed, then launch Finder).
  • Connect iPhone to PC via USB.
  • Run the utility and select the connected gadget.
  • Download the iOS 13 file package from the official website.
  • In iTunes or Finder, click on the gadget icon and go to the “Browse” section in the left menu.
  • After clicking on “Update”, while you need to hold down the “Options” button, it is “Shift”, and in the pop-up window select the above file.
  • Confirm the intention to update and wait until the end of the procedure.

During the procedure, the iPhone will reboot and turn on automatically when finished. It remains only to disconnect from the PC and use.

Finder can be found in the Quick Access Toolbar

How to upgrade iPhone 6 to iOS 13

The same goes for iPhone 6 owners. Although you can find photos of the dark design of iOS 13 iPhone 6 on the web, it was actually a joke.

We are talking about a post in the popular hacker NighttigerFTW, who claimed that he was able to bypass Apple’s blocking. However, he could not tell how he managed to install iOS 13 on the iPhone 6, and after a series of critical comments from colleagues, he said that it was a joke.

The same photo of iOS 13 on iPhone 6, posted in

Note! Many users believe that Apple has also discontinued support for 6S and 6S Plus, but this is not the case.

How to access iOS 13 Beta profile

The principle of activating the iOS 13 beta profile is similar to a simple firmware update using a PC on MAC X OS, which was mentioned above. But there is a small amendment. this also requires an Apple computer, but additionally with a beta version of the operating system. According to the official instructions, you need either beta macOS 10.15 Catalina, or or Xcode 11. But if neither one nor the other, you can use special driver programs. For this, the familiar MobileDevice or any other analogue is suitable for many. The utility still needs a PC with an Apple operating system.

  • the aforementioned PC with the corresponding OS or program;
  • installed the latest iTunes or Finder (if there is a version of Catalina);
  • USB cable;
  • downloaded iOS 13 beta (easy to find on the Internet);
  • iPhone starting from the seventh generation or SE (which is not a shame).
READ  Which iPhone is greater than 7 or 7

Note! If any beta version of iOS is already installed on your smartphone, you need to uninstall it by going to the settings, section “General” and in the item “Profile”.

  • Install a pre-downloaded utility (if the required OS version is not available).
  • Launch iTunes or Finder.
  • Connect iPhone via USB.
  • Wait for synchronization.
  • In iTunes or Finder (the utility must be the most recent), click on the device icon and go to the “Overview” section in the left menu.
  • Then click in the new field on “Update”, while you need to hold down the “Options” button, it is “Shift”, and in the pop-up window select the pre-downloaded beta firmware.
  • Wait for iPhone to finish updating.
  • Quit iTunes and turn off your phone.

If everything is done correctly, developer rights will be activated, and the user gets something like Root rights in Android.

How to install iOS 13 on iPhone 5s

In fact, back in 2019, Apple announced that with the release of the 11th generation of the legendary smartphone and the new version of iOS, it would stop supporting the frankly outdated iPhones 6 and older. Therefore, the owners of the 5S model did not receive a notification about the release of a fresh update.

The new version of Apple’s software is popular due to the presence of night mode

Unfortunately, the efforts of third-party developers and fighters against the capitalists from Cupertino also came to nothing. There are no keys to installing iOS 13 on unsupported iPhones today.

Note! In fact, it makes no sense to install the thirteenth version of the firmware on 5 S, since due to the high requirements, the characteristics of the phone will not pull the normal operation of the software.

What is iOS 13 Developer Profile

After the presentation in September, Apple offered licensed IT professionals to download the iOS 13 developer profile. In principle, this is a standard procedure, but with the release of the new firmware it became more difficult to do this.

For starters, it’s worth mentioning that the developer profile is such a feature for those who are involved in creating applications on the iOS platform. Simply put, by activating it, programmers and IT studios can test their product before the official release.

And if earlier anyone could install iOS 13 beta, now, as Apple representatives say, “beta firmware was created for developers and nothing more.” Nevertheless, with the help of some loopholes, it is still possible to activate the mode without a license.

The firmware information will indicate that this is a beta version

Important! If you put it in beta, many mobile apps like social media or online banking might not work. In principle, this mode should be used on the gadget that you do not mind.

Can’t update iPhone. what to do and what to do?

Hello everyone! Most recently, I faced such a problem. my iPhone categorically refused to update to the new firmware version, both through iTunes and through iCloud. I just displayed the inscription. “Failed to install the software update. An error occurred while loading iOS. ” Although, in fact, the update was not only available, but already downloaded to the device. A riddle? Even some! But the “answer” was successfully found by me and now my iPhone is running the latest mobile axis.

And, of course, I could not help but share this joy and wrote detailed instructions on how to successfully solve the problems associated with installing new firmware versions on Apple devices. Wow, how bent! 🙂 Let’s go!

The first thing you should pay attention to is whether your device supports the version of the software that you are trying to install. For example, iOS 14 (as well as its modifications) can be “installed” on:

  • iPad mini 4th generation, iPad Air 2nd generation, iPad 5th generation, iPad Pro and older.
  • iPhone 6S and all subsequent devices in Apple’s smartphone lineup.
  • iPod touch 7th generation.

Have you checked? Does your technique fit this list? If the answer is yes, then we proceed as follows.

In the main menu, go to settings. basic. profile (at the very end of the list).

By the way, it was this method that helped me, for some reason it interfered with the update. “iOS beta Software Profile”. Apparently because I often install test firmware and get access to new functions before anyone else 🙂 Do you want it too? Read. How to Install iOS Betas.

After removing it, everything went “like clockwork” and took a fairly small amount of time (about 20 minutes).

In any case, here are a few more points that may prevent the installation of new software and it makes sense to pay close attention to them:

  • Check the charge level, it should be more than 50% or simply connected to the mains charger (Important! It is recommended to use the charger from the outlet!).
  • It may well happen that Apple’s servers are overloaded. this often happens on the days of presentations and the release of new versions of iOS. How to check their status at the moment. read here. In this case, it remains only to wait, usually not much (from 1 hour to a day).
  • A trivial thing. check if the Internet is functioning normally, if the connection is poor, the update process can take a long time.
  • If the update cannot be performed directly from the device, then you can and should use iTunes for this operation. Make sure that the version of the program is the latest (how to do it?). Almost always, when you connect your iPhone or iPad to your computer, iTunes itself will offer to install a new version of the software. If this does not happen, then we will install the update forcibly. To do this, we use this instruction for restoring the software (Attention! Create a backup copy so as not to lose all data).
  • Changing the USB port, Lighting cable, Wi-Fi hotspot, computer in the end can also help troubleshoot problems.

As you can see, there is nothing complicated. all the tips are quite simple and easy to do at home. But, at the same time, their implementation will almost 100% help to put the fresh version of the software on your iPhone. So we need to act!

Addition! Updating over Wi-Fi may be interfering with an inoperative fingerprint reader. Is the fingerprint sensor not functioning on your device for some reason? Installing a new firmware version is possible only through iTunes. And one more thing. if you are faced with the error “Unable to check for iOS update”, then this instruction will suit you. Wow, I don’t seem to have forgotten anything 🙂

After all the manipulations, the iPhone still does not want to be updated or does it get incomprehensible errors? Write in the comments. we will figure it out together!