Upgrade iPhone to version 10

recovery via DFU mode

DFU is a special emergency mode for Apple devices that should be used by users in case of problems with the gadget. So, using this mode, you can try to complete the recovery procedure.

First of all, you will need to completely disconnect your Apple device and then connect it to your computer using a USB cable. Start the iTunes program. the device will not be detected in it yet.

Now we need to put the Apple gadget into DFU mode. To do this, hold down the physical power key on the device and hold it for three seconds. After that, without releasing the power button, hold down the Home key and hold both buttons for 10 seconds. Finally, release the power button and keep holding the Home button until the apple device is detected in iTunes.

In this mode, only device recovery is available, which, in fact, you need to run.

disable antivirus

Some antiviruses, wanting to ensure maximum user safety, can accept safe programs and malware, blocking some of their processes.

How To install iOS 10 Now iPhone or iPad

Try disabling your antivirus completely and trying to restore your device again. If the procedure was successful, then your antivirus is to blame. You will need to go to its settings and add iTunes to the list of exceptions.

Using iTunes to Install on iPhone

There are two ways to update your iPhone to iOS 10, the first is using your computer and iTunes installed. It is considered safer and faster. First, check the relevance of the program, if necessary, install a new version. Followed by:

  • Back up your iPhone data. To do this, connect your phone to your computer, open the program and select your device. Go to the “Backup” tab and select the location where you want to put the copy. It could be iCloud or your current computer. In the second case, you can put a password on the data.
  • Further, the iOS 10 update for iPhone 6 continues with the selection of the “Overview” tab. In the window that opens, click “Update”.
  • Next, you need to select “Download and Update”. New iOS installation process started.
  • After a certain time, you need to restart the phone and start testing new features.

USB cable replacement

Many jobs when working with an Apple device on a computer arise from a USB cable.

If you are using a non-original cable, even one certified by Apple, you need to be sure to replace it with the original one. If you are using the original cable, you will need to carefully examine it for any types of damage, both along the length of the cable itself and on the connector itself. If you find kinks, oxidations, twists and any other types of damage, you will need to replace the cable with a whole and always original one.

iTunes update

First of all, of course, you need to make sure that you are using an up-to-date version of iTunes.

To do this, you need to check iTunes for updates and, if they are found, install the updates on your computer. After the installation is complete, it is recommended to restart your computer.

using another computer

If none of the methods suggested in the article helped you solve the problem with restoring your Apple device, you should try to perform the restore procedure on another computer with a fresh version of iTunes installed.

If you have already encountered the problem of restoring the device through iTunes before, share in the Комментарии и мнения владельцев how you managed to solve it.

We are glad that we were able to help you in solving the problem. Bookmark the Lumpics.ru website and we will still be useful to you. Thank the author, share the article on social networks. Describe what did not work for you. Our specialists will try to answer as quickly as possible.

editing the hosts file

In the process of updating or restoring an Apple device, iTunes necessarily contacts the Apple servers, and if the program fails to do this, it is highly likely that the hosts file has been changed on the computer.

As a rule, computer viruses change the hosts file, so before restoring the original hosts file, it is advisable that you check your computer for virus threats. You can do this both with the help of your anti-virus by starting the scan mode, and with the help of a special healing utility Dr.Web CureIt.

If any viruses have been detected by your antivirus software, be sure to fix them and then restart your computer. After that, you can proceed to the stage of restoring the previous version of the hosts file. details on how to do this are described on the official Microsoft website.

Did this article help you?

Unfortunately, to the question of how you can install Apple iOS 10 on iPhone 4s, the answer is. no way. This gadget is already a little outdated, and such a powerful operating system will slow down all processes. Therefore, the developers have excluded this phone model from the list of supported devices. But, starting with the iPhone 5, you should have no problems installing the new firmware.

Free upgrade to Windows 10 for Windows 7 SP1 and 8.1 users

Windows 7 support has ended

On January 14, 2020, Microsoft stopped releasing security updates for Windows 7 and ended technical support for this version of the system. To keep your PC serviced and protected while receiving monthly security updates, you have the option to upgrade to Windows 10 for free.

For Windows 7 and 8.1 users, the planned one-year free upgrade to Windows 10 officially ended on July 29, 2016.

Immediately after that date, Microsoft launched a site for users with disabilities using assistive technology for Windows. However, it stopped working on January 16, 2018. However, using the Windows 10 Upgrade Assistant, which is still available for download from official servers, anyone can still upgrade to Windows 10 for free, but only to Windows 10 (version 1709).

However, at the moment, you can immediately update to the latest current version of Windows 10 October 2020 Update (version 20H2) using the Media Creation Tool. In this case, the new Windows system will be automatically activated with a digital license.

The necessary conditions

Free update is available only for licensed users of Windows 7 SP1 and Windows 8.1.

To take advantage of the free upgrade offer, follow these steps:

For a hassle-free installation, you need to install all the latest updates for your current system. Also, make sure Windows 10 is right for your computer.

Download the new Windows 10 Media Creation Tool to upgrade your Windows 7 SP1 or 8.1 operating system to Windows 10 for free.

READ  How to turn off an alarm on iPhone

How to Update Your iPhone to iOS 10

Run the utility and accept the license agreement.

Next select Upgrade this PC now.

Wait while the utility downloads all necessary files, checks your computer for compatibility and downloads all necessary updates. This may take some time depending on the speed of your internet connection.

Next, make sure Keep personal files and apps is selected and click Install.

The update may take from one to several hours depending on your computer configuration.

After completing the update, Windows 10, version 20H2 will be installed.

Connect to the internet and check the activation of the system. Press the Windows I key combination to open the Settings app and go to the Update & Security & Activation menu. You should see that Windows is activated with a digital license.

Activating Windows 10 using Windows 7 and 8.1 keys

Windows 10 can be activated with product keys from Windows 7 and 8.1.

If you are the owner of an OEM version of Windows 7 or 8.1, then when you perform a clean installation of Windows 10, version 20H2, you can go through the activation procedure in the Settings Update and security application Activation Change product key.

You can see other ways to update to the latest version of Windows 10 in the article:

How to update iPhone to iOS 10.3 and what’s new in the update

[wpsm_box type = “blue” float = “none” text_align = “left”] In this article, we will show you how to update your iPhone to iOS 10.3, which was released recently. We will also tell you what’s new in this update. [/ Wpsm_box]

Error correction

Here the Yabloko players did their best. They’ve fixed a large number of bugs, including UI crashes. We’ve also fixed a famous vulnerability where a stranger could cause your iPhone to freeze by sending a text message.

Reclaiming disk space and speeding up the device through the use of APFS

The main feature of the version is the new file system. Apple File System. APFS is much more efficient at allocating performance and disk space than previous software. Beta testers note that the amount of free space after installing the OS has increased to 5 GB.

upgrade, iphone, version

The new file system gives a performance boost. This is especially noticeable on older devices like the iPhone 5s. After installing the update, the gadget starts working faster and smoother. without jerking or freezing. When switching to APFS, the user does not lose a single bit of personal data.

What’s new in iOS 10.3

According to forecasts, the current update will be the last in the iOS 10 branch. It will add several new features to the gadget, albeit minor ones, but the iPhone will run faster and the user interface will change slightly.

An iOS update is not available (“Checking for an update”). What to do?

Restarting the Settings app

The easiest solution is to restart the Settings program. To do this, open the multitasking menu (double-click on the round Home button) and remove the Settings program from it (drag up the program thumbnail).

Then open Settings again, go to the General section and check for an update in the Software Update section.

Change the way you connect to the internet

Sometimes, software updates are not found over the Wi-Fi network. In this case, you can try to turn off the Wi-Fi network and find updates using 3G.

After the iPhone or iPad finds an update, you can turn on Wi-Fi again and download the update for your device.

Is your device jailbroken (Cydia)?

If the Cydia application is installed on your device (jailbreak), then this is the main reason why the iOS 10 Update is not available on the Settings path. Basic. Software Update. The developers of the jailbreak specifically block the ability to update “over the air”. The fact is that when you update your iPhone or iPad with a jailbreak, the device turns into a “brick” (eternal chamomile, white apple, etc.).

In order to install iOS 10 on a jailbroken device, you need to perform the iPhone (iPad) Restore procedure in iTunes. Detailed instructions are posted here.

Otherwise, try the methods below:

Resetting “network settings”

Some users report that resetting their network settings helped them solve this problem. In order to reset the network settings, go to Settings. Basic. Reset and select Reset Network Settings.

IOS 10 update not available on older devices?

To our great regret, Apple has reduced the list of devices compatible with iOS 10. IPhone 4s, iPod touch 5th generation, iPad 3, iPad mini, and older devices cannot install iOS 10.

How iOS 10 works on iPhone 5?

Now let’s talk about the most interesting thing, namely the work of the new iOS 10 on your beloved fifth iPhone. Perhaps I’ll start with the fact that the device is already four years old. If you compare the work with the previous version, then you will not really feel the difference and everything works a little slower. But let’s remember 6 iOS and how the device worked at the start of sales.

You should never update your iPhone if it is first in line to end support. After installing iOS 10, the following surprises await you:

  • deterioration in multitasking;
  • deterioration in gaming performance;
  • slow loading of pages in the browser;
  • reducing the operating time of the device.

I can list these disadvantages for a very long time, because a lot of them have already been noticed. In general, only one conclusion can be drawn. the operation of the device has not improved, but only worsened.

iPhone 5 slows down on iOS 10

  • Checking the memory on the device. If you have hammered it to the eyeballs, we will rather release it and see how much the device will come to life.
  • Disable all unnecessary. We remove the iOS effects that can only load your processor. Go to Settings. General. Universal Access. Reduce Motion.

Immediately, in Universal Access, go to Increase Contrast and activate Decrease Transparency.

  • Sometimes we restart the phone. This will help you clear the RAM and thus refresh your phone a little.
  • Now you should think about a new device, because soon you will get tired of it all. Especially this will not please active users of instant messengers, because first of all, these programs begin to be lagged.

    Can I upgrade my iPhone 5 to iOS 10?

    If you are a happy owner of an iPhone 5, then I can only please you. After all, iOS is available for installation on this device, despite its age. Today it is the oldest device in the Apple lineup. Chances are that the next iOS will no longer be available and Apple will stop supporting it.

    READ  How to Delete Account on iPhone 5s

    After all, as the experience with 4S has shown, you need to stop in time. The company showed that it can update old devices, but the work of the latest OS on the old man is just awful.

    Rollback from iOS 10 to iPhone 5

    No wonder everyone always says that you need to make a backup before installing a new operating system on your iPhone. IOS 10 is no exception. In the absence of a backup copy, you can even stop reading. After all, now there is no way to roll back and your iPhone 5 remains so forever.

    Of course Apple gives its users the option to roll back. But these are just the first weeks after the release, which have long passed.

    For the lucky ones who have a backup, I suggest that you watch the following

    Guide-Apple

    How to Unlock iPhone 5 on iOS 10?

    The new iOS received a lot of updates and unlocking became one of the main ones. Forget about the old swipe left gesture. Now just press the Home button twice and the phone is available for use. This is especially convenient when you have Touch ID, because the process is incredibly fast.

    Everything is simple right there, or we set a password that appears after the second click. Or, simply by pressing the button twice, we get a smartphone, ready to go.

    When buying a laptop or computer, usually, he already has OS 7/8 or Linux installed (the latter option, when, helps to save money, since Linux is free). In rare cases, cheap laptops may not have any OS at all.

    It will be screen-adjusted by the written duo of Phil Hay and Matt Manfredi. No word on whether Benioff and Weiss will direct the film The graphic novel asks, “What if Lovecraft’s monsters were real?” H.P. Lovecraft. famous p.

    How to create a page on an LCD display without a phone number? the most popular social network in the CIS countries. Not only the number of active users, but also the number of fake accounts is growing every day. To solve this problem, hand.

    How to remove an application from a Samsung Smart TV? networks: Nowadays, TV sets with the Smart TV function, which turn your “home screen” into a real wall computer, are in special demand. As well as for every occasion.

    The best programs to install Windows 7 from a USB flash drive The software to install Windows 7 from a USB drive eliminates the need for a CD drive. All you need to do is prepare the distribution in advance and set the BIOS settings.

    How to set up a Sony TV set. Remote control for Sony TV. How to set up a Sony TV set The company makes settings for a Sony TV set of all editions and modifications. Tuning and sorting of analogue and digital television channels is performed, connection of the Sony TV set to the global.

    Thirdly, the Siri program has become better and improved to self-education. Now the voice assistant is aware of you on the go with the assistance of machine learning.

    Fourth, when taking pictures, your camera will be able to detect and recognize faces.

    5th, Apple Maps are supplemented with various convenient services.

    Fourth, in the musical application, the design has undergone significant configurations.

    Many people are now wondering how to update their iPhone weight and how to install iOS 10 on iPhone. This can be done in several ways. The first update method is characterized by the use of a computer and downloaded iTunes software. The second method is based on the use of the first only iPhone or other device with charging.

    This method of updating to version 10 is straightforward and simple and safe. After turning on the computer, check that you have the latest version of iTunes software installed, if not, download the latest.

    Then carry out a series of successive actions to update the system.

    1 Back up data to iPhone 6. Turn on iPhone and select “Back up” from the options menu. With all this, determine the path where all data from your iPhone will be copied from. For example, in the program of cloudy data storage iCloud or in this PC, while setting a hidden password.

    2 Downloading updates to iPhone. Log in to the phone in the “Overview” application, and in the new window activate the “Update” button, and later. “Download and update”. The system will start updating to the latest version.

    How to Upgrade iPhone to iOS 10 Jailbreak Blog

    The long-awaited iOS 10 was released on September 13th. Smartphone owners immediately had a question: “How can I update my iPhone to iOS 10?”. It is worth noting that there is nothing difficult in updating the OS, you just need to follow the installation instructions and prepare the device well. Answers on how to install iOS 10 are presented in this article in the form of detailed instructions.

    IPad firmware up to iOS 10

    When the firmware file has been downloaded, open iTunes. Hold Shift if you have Windows (Alt-Option for MacOS) on your keyboard and press the “Restore” button.

    Next, select the firmware file downloaded in the second step. And click “OK” or “Select”.

    Click the Restore button. The firmware process has started. At this point, it is better not to touch the computer and iPad.

    Check available space

    The iOS 10 file weighs about 2 GB, and the device needs at least 2.5 GB of free memory to install the OS. This does not mean that the dozen takes up more space. the additional space is needed to unzip the files and complete the update process. You can find out the amount of available memory on iPhone and iPad in the General menu. About this device.

    By the way, iOS 10 weighs much less than previous versions. For example, a 128GB iPhone with iOS 9 installed only offers users 113GB of free storage, after installing iOS 10 this figure will increase to 122GB. 16GB iPhone with iOS 9 available 11.9GB, and after installing iOS 10. 12.85GB.

    Firmware iPad and iPhone up to iOS 10

    In this article, I will describe in detail the process of full flashing iPad, iPhone, iPod Touch to the latest version of the operating system iOS 10. The process is briefly described in the article Firmware iPad, but here I made it even more detailed with the most up-to-date screenshots from the moment you thought of flashing. to a fully installed system. Plus, here in the Комментарии и мнения владельцев you can ask questions of interest about the firmware on iOS 10, solve emerging problems, etc. We will try to help everyone within the framework of the Комментарии и мнения владельцев.

    READ  How to find iPhone subscriptions

    You can always update through Settings-General-Software update. This article describes exactly the flashing of the device, which the user may need for one reason or another.

    Preparing iPad2. Updating iTunes3. Create a backup 4. Download iOS 95 firmware. IPad firmware up to iOS 96. iPad7 setup. Answers to questions about the firmware

    So you’ve made up your mind. Believe me, there is nothing complicated about it. Note that this manual is relevant for iPad, iPhone and iPod Touch. All actions are exactly the same.

    Find my airpods

    Airpods are wireless earbuds designed by Apple. They are distinguished by high sound quality and small size. The latter often leads to the fact that gadgets are lost, even at home. iOS 10.3 has the useful Find my Airpods feature. You can find it by the corresponding plate in the Find my iPhone application. After pressing the search button, the headphones will emit an increasing high-pitched sound to help locate them. This function is only possible when there is a Bluetooth connection between Airpods and iPhone. Otherwise, the application will indicate the location of the last time such a sync was registered.

    How to upgrade iPhone to iOS 10

    Apple has just released the latest update to its mobile system. iOS 10 for iPhones and iPads. In this guide, we’ll show you how to easily prepare to install iOS 10 on a mobile device. And also how to install the latest update. We invite you to familiarize yourself with our guide.

    iOS 10 is the latest update to Apple’s system for this company’s mobile devices. He introduces a number of new products and changes. Among them, we can find at least a revised login screen with a lot of notifications and personalization options, apps inside messages (in particular: for iMessage) or, finally, new features in settings. We have already written about some of them at download.net.pl.

    That’s not all, iOS 10 introduces several patches, system enhancements, and security features. The update will work mainly on newer phones and tablets, but it is also possible to install them on older ones. There is, of course, nothing to expect exceptional action on older iPhones or iPads.

    What’s new in iOS 10.3

    According to forecasts, the current update will be the last in the iOS 10 branch. It will add several new features to the gadget, albeit minor ones, but the iPhone will run faster and the user interface will change slightly.

    Flashing via DFU Mode

    Before flashing, the phone must be switched to DFU Mode. We connect the device to the computer and turn off the smartphone. Next, simultaneously hold down the Home and Power keys and count up to 10 seconds. After their expiration, release the Power button while continuing to hold Home until iTunes recognizes the iPhone in DFU mode.

    Further, we act in the same way as when recovering through Recovery Mode.

    • Choosing your device in iTunes.
    • In the smartphone control menu, we find the item “Restore iPhone”.
    • We select it by holding down the Shift key for the Windows operating system or Alt for the Mac OC.
    • In the window that opens, specify the path to the file with the firmware and click Open.
    • We are waiting for iTunes to complete the operation.
    • We turn on and use a fully working device.

    This method is suitable for those who, for some reason, failed to upgrade to Recovery Mode. With this our instruction has come to its logical conclusion, we wish you good luck in this “difficult” process, and please write all your questions in the Комментарии и мнения владельцев.

    Do not forget to read the Комментарии и мнения владельцев, there is also a lot of useful information. If there is no answer to your question, and there is an answer to later Комментарии и мнения владельцев, then the answer to your question is contained in the article, respect someone else’s time.

    Selecting and downloading firmware

    Since since 2009, Apple began to control which versions of iOS it is possible to return to specific devices, you need to check whether it is possible to rollback from your device in principle and, if possible, to which version.

    Demonstration of possible iOS for rollback on the example of iPhone 4S

    For this check, it is very convenient to use the service from Appstudio.org, by clicking on the link you will clearly see a list of available iOS versions that you can return to. In our case, this is iOS 8.4.1, with this information we proceed to the next step, namely, you need to download the firmware of the corresponding version to your computer.

    The download process consists of following this link and choosing your device type, device generation and firmware version. After all these steps, the download process will begin, select a place on the PC to save the firmware and use it to rollback in the future.

    Preparing to rollback iOS

    Disable Find My iPhone

    If you have this option enabled, then before the rollback procedure it must be disabled, otherwise iTunes will give you an error when you try to start the process and this will be the end of it. How to disable Find My iPhone on our website.

    Rollback iOS or how to revert to a previous version

    Always, with the next iOS update, some users persistently want to return the previous version, in other words, roll back. The reasons can be both dissatisfaction with the interface, the appeared brakes (in the case of iOS 7), and outright bugs up to the inoperability of the phone (in the case of iOS 9). Fortunately, the company gives us such an opportunity, and now we will consider this process using the example of our instructions, we will roll back the iPhone 4S.

    Downgrade process

    There are 2 ways to rollback: using RecoveryMode or DFUmode. RecoveryMode is an emergency recovery mode. Designed to restore the working state of iOS devices after they stopped working normally.

    DFUMode is, in fact, the same RecoveryMode, it differs only in that it performs the entire operation bypassing the iPhone OS, and flashes it directly through the firmware. It is recommended to reflash this method if it is impossible to reflash the smartphone using RecoveryMode.

    iPhone slows down after updating: what to do?

    NNCXV.INFO 2021