What To Do If Your Printer Prints With Stripes

Why does my Epson printer print with stripes, how to fix the problem

If streaks appear when printing on an Epson printer, then the cause of the problem is low ink, clogged nozzles, mechanical or electrical failure. Let’s figure out what the malfunctions are connected with and how to fix them.

Ink and cartridge problem

The main reason why the printer prints stripes is due to insufficient ink levels or damaged cartridge.

Checking ink levels

To check the ink supply for printing:

  • Install Epson Status Monitor 3 on your computer,
  • Open a text editor or document for printing and simultaneously press Ctrl P;
  • In the “Printers” section, select the connected model, be it Epson L110 / L210 / L312, and Click on the “Properties” or “Settings” button. depending on the version;
  • From there, go to the “Maintence” tab and select “Epson Status Monitor 3”;
  • A window will appear with information about the ink level in the cartridge, which will look like a graphic image.

When a continuous ink supply system is connected to the printer, it is also CISS, then it is enough to determine their level by looking at the transparent containers connected to the Epson L355 / L364 / L805. If streaks appear in color printing, one of the colors has run out.

Damaged cartridge

Damage manifests itself as:

  • Leaks on the body or compartment where the cartridges are installed;
  • Dirt in the air intake vents causing ink to flow Intermittently and print defects.

You will NOT be able to fix leaks manually, so the best solution is to replace the cartridge. If the problem is in contamination, then they get rid of them, rinse the containers. Dried ink can be pushed through, temporarily eliminating horizontal streaks on documents.

Unsuitable ink

When streaks appear on the inkjet printer after refueling, then the problem is with the wrong ink. A special set of ink is produced for each printer, and if an attempt is made to replace them with an available option, printing is disrupted.

Clogged cartridge nozzles

Clogged nozzles occurs for two reasons:

  • During the installation of ink tanks, fine debris got into the camera;
  • Dried dirt remains on the nozzles.

It is not necessary to disassemble the printer for cleaning, instead:

  • On Windows, open “Start” and from there go to “Settings”;
  • Open the “Devices” section;
  • In the menu on the left, click on “Printers and Scanners”;
  • Once Click on the used device in the window on the right;
  • A menu will appear where select “Control”;
  • There click on “Print Settings”;
  • Go to the “Maintenance” tab, in the middle open “Cleaning the printheads”;
  • After reading the brief annotation, Tapa “Run”.

Perform the operation 2-3 times in a row, and then leave the printer idle for an hour. Then check how the stripes are on the print.

When the device continues to run:

  • Take out the cartridges from the case to wipe them with a lint-free cloth;
  • If the nozzles are noticeably clogged with dirt or ink, it is recommended to soak them, immerse them in liquid (water, special liquid) for 5-50 minutes and to a depth of 0.5 centimeters. Then clean up the dirt and try to print the document;
  • Additionally Clean the cartridge compartment. Dust or small debris may have gotten there, blocking the ink passages.

Malfunctions in system nodes

In addition to the ink supply mechanism, problems arise when the electrical or mechanical components of the printer fail, after which the color or black and white all-in-one printer begins to print with malfunctions. It will not be possible to fix such problems without Specials, but you can identify the approximate cause of the malfunction.

  • As the grip of the rubber paper feed rollers looses, the sheet feed will drop, causing the print head to move over the same spot several times. As a result, horizontal stripes appear on the document.
  • Toner leaks occur when the absorbent pads, such as pads or absorbers, are overfilled with waste ink. It begins to flow out of the body and fall on the moving mechanisms, including the print head. On the leaves it is like streaks or oblong stripes.
  • The streaking effect appears after a printhead position sensor failure. The printer starts an incorrectly sensible location of the PG, which is why it sends false signals to it, which makes it skip areas for printing or, on the contrary, applies an equal image several times in a row.

You can solve the last problem yourself. What to do for this:

  • Lift the top cover of the printer;
  • Check the ribbon cable to the print head. It should not be pinched or strongly bent;
  • If there is visible dirt, they should be removed.

Banding on an Epson printer is a common problem often associated with insufficient ink for printing or clogged nozzles. Less often, a malfunction occurs from a mechanical or electronic failure in the operation of the device, which will require contacting specialists at the service center.

HP printer prints with stripes?

The problem of printing distortion sooner or later overtakes every printer user. In the process of printing documents or images, ink is NOT evenly distributed on the paper, as a result of which vertical or horizontal stripes are formed, which by itself interferes with the normal perception of text.

Of course, in cases where the documentation is NOT overly important and the small stripes do NOT significantly affect readability, the issue can be ignored. But what about cases when you need to prepare important documents and the finished printout should look presentable? Here you need to determine the cause and try to eliminate it.

Why does my HP printer print stripes?

Many causes of streaking and other print distortion can be identified by their appearance.

printer, prints, stripes

Possible reasons why an inkjet printer may strip:

  • Poor ink supply (white or colored streaks),
  • Clogged nozzles,
  • Printhead misalignment (vertical line breaks),
  • Dirt on the encoder disc (white stripes, equidistant from each other).

Possible reasons why a laser printer can strip:

  • Out of toner (white vertical stripes widening with each new page). how to refill the cartridge,
  • Mechanical damage (vertical stripes of different widths),
  • Waste toner hopper overflows (black dots and specks),
  • Wear or damage to the drum unit (intermittent black stripes along the edge of the page or randomly scattered black dots on the page),
  • Problems with the metering blade (dark streaks on the page or faded vertical streaks).

We perform nozzle testing

If you find that the ink tanks are intact, but there are streaks when printing, it is worth performing a nozzle check. To do this, go to Start. Devices and Printers, right-click on the desired device and select Printer Properties from the drop-down menu (if not Win7, then just Properties).

In the window that opens, click Settings, go to the Service tab and there you will find the Nozzle Check button.

On some printers, such as HP, the nozzle test can only be performed using the buttons on the device. What exactly and how to press depends on the specific model (find out on the manufacturer’s website).

Did you notice gaps on the test page? It is reasonable to assume that the nozzles are clogged and need to be cleaned using the software method.

If unsuccessful attempts to clean, try manual cleaning. This case is quite unpleasant and requires a lot of time and patience when troubleshooting, and in some cases it is better to contact a specialist.

Shaft and thermal film problems

If the black streaks are in one place, then pull out the cartridge and inspect the shaft. It deforms over time and this leads to such results. Also, the problem may be due to a foreign object hitting it, removed the yaky, it will be possible to get rid of the stripes.

In addition, thermal film can be a prerequisite for such printer printing. Perhaps it was damaged, in which case it is recommended to replace the cartridge with a new one. We take out the cartridge from the printer, you should see if toner spills out of it. You can determine this yourself. Pull the cartridge out and shake it. If this was the problem, the hands will be stained with black paint. Here you need to replace the cartridge with a new one, since you will hardly be able to do something.

The printer prints with cross stripes all over the paper

The printer prints with stripes. When printing, cross stripes appear all over the sheet. It should be added that this is the most common printing problem.

The reasons for the appearance of such stripes:

  • Overfilling the waste toner bin;
  • Squeegee replacement required.

In this situation, it is enough to clean the waste toner box and the streaks will disappear completely.

What to do if the printer prints with stripes. Printer Prints Stripes. Troubleshooting

An inkjet printer prints in stripes. Possible causes of the problem:

  • Low on ink.
  • Printhead nozzles (PG) clogged with dried ink.
  • Air is trapped in the print head.
  • Malfunction of the mechanics or electronics of the printer itself.

Color inkjet printer strips

Ink level problems. What can be done:

Sins of ink level follow when the printer starts to print streaks on photos or documents unexpectedly. It’s not about ink if: you recently changed or refilled the cartridge, there was a malfunction (for example, the paper was jammed and you pulled it out of the printer) or something happened to the printer itself (it was turned over, dropped, or was in the cold for some time ).

Check ink levels programmatically and replace cartridge.
Select Maintenance or Service from the printer control menu. Run an ink level check. If there is little or no more. replace cartridges.

Visually check the ink level in the ink tank (if you are using one) and refill.
In refillable cartridges, the actual ink level may NOT coincide with the meter reading, so remove the cartridges and visually check the ink level. If there are very few of them left, the cartridges should be refilled.

Check the efficiency of the CISS (for those who have it installed)
Make sure there is enough ink in the donor bottle. Check if something is interfering with the flow of ink through the plumes, as well as at what height the donor containers are (sometimes it makes sense to raise them). If air gets into the plumes, it should be removed from there. For details, see the instructions for removing air from CISS loops for Epson. Or instructions for Select HP and Canon models. If the plume is forgotten with dried ink, it should be cleaned or replaced.

Change old ink (for owners of refueling complexes and CISS)
It is unlikely that the streaks when printing “suddenly” appear due to old ink, but the expiration date should still be checked.

Printhead problems. What can be done:

You should pay attention to this item first of all, if the stripes during printing appeared after a long idle time of the printer (they did NOT print for more than a week, and it was NOT preserved) The occurrence of problems with GHG may also be preceded by manipulation of the printer, transfer from place to place, change or refilling of cartridges, attempts to “get inside” without proper preparation.

READ  How to Print To Deskjet 2130 Printer

Runs “Nozzle / Nozzle Check”
In the printer control menu, select the item “Nozzle check” or “Nozzle check” (depending on the printer model). A printout of a test page will help determine the cause of the problem and possibly even fix it using software.

Runs “head cleaning”
In the printer control menu, select the “Head cleaning” or “Nozzle cleaning” item. You can run it several times, but always with pauses of 5-15 minutes. If several of these procedures did not help, proceed with cleaning with service fluid.

Flush the printhead (PG is located in the cartridge)
If you have a two-cartridge printer, then the PG is on the cartridge. Try to rinse it according to the instructions (point 1), if it did NOT work, then the cartridge will have to be replaced.

Cleans the print head with service liquid (the PG is located in the printer)
The method is relevant in case of severe clogging or air ingress into the print head. Use a syringe, cleaning fluid, and lint-free wipes to thoroughly clean the nozzles.
Step-by-step instructions can be found in the detailed instructions for cleaning the steam generator.

Other printer malfunctions.

In the vast majority of cases, the problem of streaking during printing is associated with the ink and print head, but sometimes with malfunctions in the printer mechanics. In this case, we recommend that you contact the service specialists, since an attempt to “get inside” without special knowledge can lead to permanent damage to the device.

Problem with reading the encoder tape.
Encoder (raster) tape. A strip stretched inside the printer with strokes, with which the device determines the position of the print carriages in space. By chance, ink or dirt can get on the tape, because of which the printer will stop “seeing” some of the strokes and will begin to “slip” part of the sheet when printing. As a result, one or more longitudinal (vertical) stripes will appear on the page.
The problem, in this case, is solved by cleaning the tape from dirt. To do this, wipe it with a dry cloth. If it does not help, wipe it slightly damp, and then dry. Moisten the cloth with water, not a cleaning liquid, because aggressive liquid can damage the strokes on the encoder and you will have to change it to a new one.

Problems with reading the encoder disc.
Encoder disc. Wheels on the side of the printer that are geared to the paper feed motor. It also has marks by which the printer determines the position of the sheet when printing. If ink or dirt gets on it, it will fail to read and cause cross-stripes on the print. The stripes will appear at an equal distance between each other, corresponding to a full revolution of the disk.
As with tape, the problem is solved by carefully cleaning the encoder disc from contaminants.

The laser printer prints in stripes. Possible causes of the problem:

  • Toner low.
  • The tightness of the cartridge is broken.
  • Waste Toner Box.
  • Blade not installed correctly.
  • Defective magnetic roller or drum unit.

How to fix the problem:

For laser printers, the cause of the problem can be determined by the nature of the streaks in the print.

Printed streaks occur in random, different places.
The cartridge is likely to be damaged. Remove it from the printer and check if toner is spilling. Make sure all rubber seals are in place. A leaking cartridge should be replaced with a new one.

Random stripes when printing

The stripes are made up of small dots.
There may be several reasons: the cartridge is incorrectly refilled, the waste toner reservoir is clogged, or for some reason the dispensing blade is incorrectly installed.
Will help: refilling the cartridge with toner, cleaning the reservoir and correctly installing the blade, respectively.

Dotted stripes on a photocopy of a passport

Stripes are NOT permanently printed on the same part of the sheet
Either the toner cartridge is low on toner, or a foreign object is on the cartridge shaft. Check the toner level and refill the cartridge if necessary. If this is not the case, check the shaft and remove any foreign objects.

White streaks when printing

There is a wavy dark stripe around the edge of the print.
The point is most likely in the drum unit. It has worn out, or completely out of order. In this case, you need to replace the imaging drum in the cartridge, or the entire cartridge.

“waves” on the sides of the page for problems with the drum

Dark stripes are equidistant from each other
This is probably just an overflow of the toner reservoir. You should check it and the correctness of refilling the cartridge as a whole.
If it does not help, then most likely the contact between the magnetic shaft and the drum is broken. This happens due to wear of the parts in the cartridge. Replace worn parts with new ones, or install a new cartridge.

Horizontal black stripes from a faulty charging shaft

My printer prints stripes | Small Business

Desktop printers contain sophisticated combinations of permanent moving parts and consumables designed for periodic replacement. When your office printer produces a print that shows streaks on or along the pages, you’re wasting paper and supplies until you diagnose the problem. Where you direct your troubleshooting will depend on the types of output defects you see and the type of printer you are using.

Inkjet Print Head

Inkjet printers are working, heat up tiny nozzles or apply an electric current to them to reshape them, forcing ink onto the page. If you see voids in your prints or horizontal lines across it, maybe your printhead has a clogged nozzle. Inkjet printers do not tolerate downtime, and you may need to clean the head several times to remove dried ink. If defects in your output interfere with the appearance of vertical lines on your page content, the Printhead may need to be corrected. Both cleaning and re-tuning will consume some of the installed ink, especially if your equipment requires deep cleaning or multiple adjustment cycles.

Laser toner or drum cartridge

Laser printers create a full page of content in one go by transferring toner to paper from a rotating drum and melting the toner with a heater. The drum is either part of the toner cartridge or is installed as a separate consumable. In any case, scratches on the light-sensitive surface may result in streaks or lines at the exit. Most cartridges have a spring-loaded shutter that opens when you insert the supplies into the printer; if you remove the cartridge and carefully open the shutter, being careful NOT to touch the drum or anything else inside the cartridge, you may see scratches on the surface. To rule out consumables as source of problems, replace the cartridge and reprint the document page.

Laser fuser

Toner consists of a mixture of shredded plastic and dyes. To adhere it to the paper, laser printers use a heating element called a fuser to melt the toner when the paper moves through the fuser rollers. If toner settles on the fuser or the rollers are damaged, you may see unexpected vertical lines in the prints. To diagnose lines that form a repeating pattern, you can find the line of repeating defects published by the printer manufacturer for your model of equipment. Throughout this document, the origin of marks on a page is identified by their location alongside the rollers and other components of the print mechanism. Certain manufacturers Provide these service manuals to service technicians only.

Dirty printer

Loose toner trapped inside the laser printer can get caught on the rollers or other moving parts and appear as streaks, streaks or lines on the print. Many roller marks form a distinctive tire print pattern on each sheet as the paper travels through the printer. Removing THESE defects requires a two-step approach. Tracking source of extraneous toner can result in a cartridge leak, which gradually fouls your machine, or a one-time accident caused by an attempt to reprint a page from another device that melts at a lower temperature than your printer uses.. depending on your experience and your printer design.

Printers prints stripes | FixYourOwnPrinter

I hope you can help me.
My epsom printer, which is a little more
1 h, prints in stripes, and I don’t know what to do about it.
I uninstalled and reinstalled the printer software
I disconnected and reconnected her to electricity
I cleared heads several times
and changed ink cartridges
, so now i’m lost, any help would be much appreciated
thanks in advance.
Marie

Marie: We need to know which direction the stripes are going: vertically, top to bottom on the paper [11 “direction] or horizontally, side to side [8 1/2” direction]. We also need to know the real model of your printer. Danny Conway

By Danny Conway, Oct 25, 2004 12:43 PM

Marie: When I see horizontal or colored lines [side by side on the page] that are printed in photographs, it usually happens to either a faulty “printhead assembly” or a faulty “main board assembly”, but it is impossible to know for sure, of course. Generally speaking, cleaning usually does not help if it is an equipment / parts problem that is actually causing these types of lines. HOWEVER: There is a slight chance that accumulation of dried ink, dust, dirt, lint and hair, which may have accumulated on the bottom and back of the printhead assembly, can sometimes cause “printhead nozzles” to appear. Shoot crookedly and this can lead to lines. The only way to find out. Will clear these two areas to eliminate this possibility. If you clear those areas and the lines are still there, then you can assume that this is probably an actual hardware / part failure causing the line problem. If these lines are more like “blank lines” or “white lines” running through the photo, then this could be bad.

CANON PIXMA printer problem: printing stripes HELP | PrinterKnowledge

Now my problem: I have a Canon Pixma IP5000 printer. Until now Never had any problems with printing photos. When I print a photo, stripes / lines appear on it. I did a few cleans and deep cleans on all colors, but the problem persisted. Cleaning cartridges were also used, but the problem persisted.

This is a scan of a photo printed on plain paper with HIGH print quality.

This is a scan of a photo printed on plain paper with print quality on normal.

It can be seen that the high quality stripes are much closer to each other.

Any idea what this might be? It’s funny, but if I look at different photos, I don’t think the problem is with the cartridges or the printhead, but I could be wrong.

Let me know what you think before I bring my printer to a Canon service station here in the Netherlands.

Prints stripes when printing images. HP Support Community

Welcome to the HP Support Community.

This also happens when copying.?

Let’s try removing root and reinstalling the software:

Before doing this, disconnect any USB cable, if any.

1.) In Windows, search for and open Programs and Features

2.) Select your HP printer

3.) Select Delete

4.) In Windows, search for and open Devices and Printers

5.) In the Devices and Printers windows, find your HP printer. If you see it in the list, right-click it and select “Uninstall” or “Uninstall device”

6.) Open the launch command using the “Windows R” key combination.

7.) Enter printui.Exe / s and click OK. (Note: there is a space between “printui.Exe” and “/ s”)

8.) Go to the “drivers” tab

9.) Find the HP printer driver. If you see it, click on it and click “Delete” at the bottom

11.) Select Apply and OK in the print server properties window

12.) Close devices and printers

13.) Open the start command using the “Windows R” key combination

14.) Enter c: / programdata and click OK. Go to the Hewlett Packard folder, delete all folders and files associated with the printer.

15.) restart your computer.

After that, download and install the software from here:

Let me know if it helps.

If the information I provided was helpful, please give us some reinforcement By clicking the Decisions and Kudos buttons, this will help us and others see we have answers!

What to do if the printer starts to print with stripes

Often, all-in-one printer and printer users ask themselves the following question: Why does the printer print in stripes? So, if the printer began to print with stripes, then keep in mind that there can be a lot of reasons for such a problem, and if you don’t make sense in the device of such office equipment, then we advise you to read more about our website or seek help from a professional. Otherwise, you can aggravate the state of your technology, creating additional problems with an illiterate approach.

READ  How To Get The Cartridge Out Of The Canon Printer

Let’s take a look at a few of the most common reasons a device might print in stripes. But right away, we note that the reasons that the printer strips depend on the type of device used. Below will be given links to articles related to a specific type of printing device.

Pollution

In general, the most common problem that follows any model of printing devices, due to which the printer prints with stripes, is contamination of the printing mechanism. Therefore, you can first try cleaning the nozzles of your machine. If the nozzles are indeed filled with dried ink, then programmatically clean them. But if several attempts have failed and stripes continue to appear on the printed letters, then you will have to clean it manually. For more information on possible causes, see the article on stripes on an inkjet printer.

Cartridge is almost empty

Also, if streaking occurs during printing, be sure to check the level of dye in the print cartridge. To do this, you just need to run a special utility, which is necessarily supplied on a disk in one set with the printer itself. If the check shows that the consumable bin is almost empty, then you will have to either purchase a new cartridge or refill. After that, the refilled cartridge should stop printing stripes.

Other Possible Problems

If the device produces stripes, which appear in different places each time, then take into account that this problem may lie in the leakage of the cartridge hopper. For example, a mylar film could bend back and waste powder began to pour out from under it, creating a semblance of a vertical strip on the sheet. To check this, you should carefully take out the consumable, and then shake it. But if the printer strips in the same place, then one of the reasons for this problem is the shaft of the device, which could undergo deformation during operation. Also, violations could arise due to the fact that some foreign object, for example, a paper clip, got into the printing mechanism. In this case, carefully inspect the cartridge itself and the filling of the printing device. It often happens that when foreign objects enter, the thermal film breaks down. In this case, you will have to completely disassemble the device and make quite serious repairs. When disassembling, remember that some parts of the printer are quite fragile and you need to be extremely careful with them.

But what to do the printer prints with stripes and the above recommendations didn’t help? It should be noted that such a defect can also appear due to damage to the cartridge due to its dropping. In this case, contacts could be broken or the case damaged. You can only solve the problem yourself by buying a new consumable or taking and replacing the damaged parts in the old one. But if even after that a strip or line appears on the sheet, then it is possible that toner or ink drops remained inside the cartridge body during refilling. As a result of operation, the coloring matter can get on some parts of the mechanism and thus, even after refilling the cartridge, printing defects will appear on the leaves.

If the printer prints in stripes, what should I do? Another reason for this problem may lie in the contamination of the metering blade, which is a part located inside the cartridge. In this case, you need to do the following: disassemble the cartridge and wipe this blade made of a translucent material resembling rubber using a soft cloth previously moistened with a special liquid. Some masters use acetone instead.

If the printed sheet is covered with black streaks, your waste bin may be full. Clean it thoroughly, then it is advisable to refill the cartridge. Another prerequisite may be damage to the drum unit. in this case, the only thing that can help is a complete replacement. Read more about the causes of streaking when printing with a laser printer in this article.

It would also be nice to refuel with high-quality and expensive dyes. I filled them in the cartridge of your device, try printing a couple of test sheets. But if it doesn’t get better, then perhaps all the problems lie in the printer itself. High-quality diagnostics made by specialists of one of the service centers with the introduction of appropriate equipment will help to identify the cause. Of course, in this case, you will have to fork out, but it is better to restore the performance of such office equipment than to buy its replacement, which will cost an order of magnitude more expensive than repair.

What to do The printer prints with stripes. What to do and how to fix

There can be a large number of printing problems and, as a rule, they often arise on their own, and sometimes immediately after refilling the cartridge. One of the most common is to print with stripes along the edge or center of the page. The stripes can be black or white. Devices of different types and manufacturers, and most often from Epson and Canon, are subject to the problem. Less to this slopes of HP and Brother.

Why this happens and what to do if a laser or inkjet printer prints with stripes, we will explain in detail in our article. Here you will find troubleshooting instructions for different models and brands of printing machines. Let’s consider the most common causes of stripes on paper and their solutions.

Why does an inkjet printer strip

Low ink.

If you print a lot, have not refilled or replaced inkjet printer cartridges for a long time, then the cause of all troubles may be low ink levels or their absence at all. Different models allow refilling the ink tank, but there are which require a complete replacement of the cartridge. In the second option, solving the problem will be much more expensive. Please check with the service center for your model.

Special utilities, which are installed from the disk supplied with the new printer along with the drivers, in automatic mode will begin to notify the user about the ink level. If this does NOT happen, then you can do this procedure yourself.

Printers prints stripes | FixYourOwnPrinter

I hope you can help me.
My epsom printer, which is a little more
1 h, prints in stripes, and I don’t know what to do about it.
I uninstalled and reinstalled the printer software
I disconnected and reconnected her to electricity
I cleared heads several times
and changed ink cartridges
, so now i’m lost, any help would be much appreciated
thanks in advance.
Marie

Marie: We need to know which direction the stripes are going: vertically, top to bottom on the paper [11 “direction] or horizontally, side to side [8 1/2” direction]. We also need to know the real model of your printer. Danny Conway

By Danny Conway, Oct 25, 2004 12:43 PM

This is epson c82.
The stripes go horizontally (direction 8 1/2 “)
i hope you can help
thanks in advance Danny
have a good night

Unknown, October 25, 2004 at 16:40

This is epson c82.
The stripes go horizontally (direction 8 1/2 “)
i hope you can help
thanks in advance Danny
have a good night

Author: unknown, October 25, 2004 at 4:40 PM

Marie: When I see horizontal or colored lines [side by side on the page] that are printed on the photographs, it usually happens to either a faulty “printhead assembly” or a faulty “main board assembly”, but there is no way to know, of course Generally speaking, cleaning usually does not help if it is an equipment / parts problem that is actually causing these types of lines. HOWEVER: There is a slight chance that accumulation of dried ink, dust, dirt, lint and hair, which may have accumulated on the bottom and back of the printhead assembly, can sometimes cause “printhead nozzles” to appear. Shoot crookedly and this can lead to lines. The only way to find out. Will clear these two areas to eliminate this possibility. If you clear these areas and the lines are still there, then you can assume that this is probably an actual hardware / part failure causing the line problem. If these lines look more like “blank lines” or “white lines” running through the photos, then it could be a faulty ink cartridge, possibly a clogged printhead assembly, or even an actual hardware / parts failure [printhead assembly or main assembly failure board]. With blank lines or white lines, it is also possible that your problem is caused by the same deposits on the bottom and back of the printhead assembly, as this sometimes causes the “printhead nozzles” to NOT fire at all. Since you have already replaced the ink cartridges. this will usually fix the faulty ink cartridge causing the problem with your line. If these lines are actually more like ink strokes or drag marks on paper, then it is possible that the same arrangement. upward sticks to the wet ink at the bottom of the printhead assembly and hangs far enough to act like a small brush. This buildup [hanging down] can transfer wet ink to the paper as it passes under the printhead assembly during the actual printing process. Sometimes this buildup just smears out the wet ink that is deposited on the paper when this “Cartridge Holder Assembly” is moved back and forth. If this sounds more like an ink smear problem, once this area is thoroughly cleaned, the problem will usually go away. Check out a couple of emails from me that should help in this area in case you want to clean up and at least rule out this possibility. Good luck,

My printer prints stripes | Small Business

Desktop printers contain sophisticated combinations of permanent moving parts and consumables designed for periodic replacement. When your office printer produces a printout that shows streaks across or along the pages, you’re wasting paper and supplies until you diagnose the problem. Where you direct your troubleshooting will depend on the types of output defects you see and the type of printer you are using.

Inkjet Print Head

Inkjet printers are working, heat tiny nozzles or apply an electric current to them to reshape them, forcing ink onto the page. When you see voids in your prints or horizontal lines across it, there might be a clogged nozzle in your printhead. Inkjet printers do not tolerate downtime, and you may need to clean the head several times to remove dried ink. If defects in your output interfere with the appearance of vertical lines on your page content, the Printhead may need to be corrected. Both cleaning and re-tuning will consume some of the installed ink, especially if your equipment requires deep cleaning or multiple adjustment cycles.

Laser toner or drum cartridge

Laser printers create a full page of content in one go by transferring toner to paper from a rotating drum and using a heating element to melt the toner. The drum is either part of the toner cartridge or is installed as a separate consumable. In any case, scratches on the light-sensitive surface may result in streaks or lines at the exit. Most cartridges have a spring-loaded shutter that opens when you insert the supplies into the printer; if you remove the cartridge and carefully open the shutter, being careful NOT to touch the drum or anything else inside the cartridge, you may see scratches on the surface. To rule out consumables as source of problems, replace the cartridge and reprint the document page.

Laser fuser

Toner consists of a mixture of shredded plastic and dyes. To adhere it to the paper, laser printers use a heating element called a fuser to melt the toner as the paper moves through the fuser rollers. If toner settles on the fuser or the rollers are damaged, you may see unexpected vertical lines in the prints. To diagnose lines that form a repeating pattern, you can find the line of repeating defects published by the printer manufacturer for your model of equipment. Throughout this document, the origin of marks on a page is identified by their location alongside the rollers and other components of the print mechanism. Certain manufacturers Provide these service manuals to service technicians only.

READ  Where to Find the Printer PIN

Dirty printer

Loose toner trapped inside the laser printer can get caught on the rollers or other moving parts and appear as streaks, streaks or lines on the print. Many roller marks form a distinctive tire print pattern on each sheet as the paper travels through the printer. Removing THESE defects requires a two-step approach. Tracking source of accidental toner can lead to a leaky cartridge, which gradually fouls your device, or a one-time accident caused by an attempt to reprint a page from another device that melts at a lower temperature than your printer will use.. depending on your experience and your printer design.

CANON PIXMA printer problem: printing stripes HELP | PrinterKnowledge

Now my problem: I have a Canon Pixma IP5000 printer. Until now Never had any problems with printing photos. When I print a photo, stripes / lines appear on it. I’ve done a few cleans and deep cleans on all colors, but the problem remains. Cleaning cartridges were also used, but the problem persisted.

This is a scan of a photo printed on plain paper with HIGH print quality.

This is a scan of a photo printed on plain paper with print quality on normal.

It can be seen that the high quality stripes are much closer to each other.

Any idea what this might be? It’s funny, but if I look at different photos, I don’t think the problem is with the cartridges or the printhead, but I could be wrong.

Let me know what you think before I bring my printer to a Canon service station here in the Netherlands.

What are the causes of lines on the page of a laser printer | Small business

Laser printers. From small desktops to workgroup computers. Give your business years of trouble-free operation. When your trusted hardware starts to create pages with vertical or horizontal lines that are NOT part of the content you are printing, start troubleshooting with simple possibilities before you assume the worst. You can narrow down the source of THESE defects by matching the symptoms you see with the suspect that may be causing them.

Roller guides

If toner seeps out of the cartridge and into the mechanical parts of the printer, it can get dirty on the rollers that move the paper through the device. The “tire marks” pattern created by this contamination appears at the edges or in the middle of the sheet and matches the position of the rollers in the paper path. If you are NOT a printer specialist, leave this cleaning job to a professional, especially if your equipment is still under warranty; however, replace the toner cartridge (or cartridges in the Color Printer) before contacting a service center to rule out faulty consumables as a cause.

Vertical stripes or lines

Depending on whether you see vertical defects in black or white. Printed marks or voids in the print. You may be dealing with a nearly empty toner cartridge, a scratched or malfunctioning Distributed toner cartridge. Replacing the cartridge with another should help you rule out the culprit. Vertical white lines can also signal an obstacle that prevents the laser from displaying pages correctly. This issue may require cleaning or replacing the laser assembly.

Horizontal lines

Horizontal imperfections and marks that appear at regular intervals can be caused by dirty rollers. Manufacturers provide model-specific repetitive defect lines that can be used to correlate the position of defects on a page with the position and size of rollers, cartridge components, fuser parts, and other potential causes of non-random marking. Dropouts and non-repetitive marks can be the result of the same issues that cause vertical defects including laser contamination and toner cartridge faults.

Recommendation

Toner cartridges. These are the main replaceable parts in laser printers. Exposure to light will damage drums and degrade print quality. Contaminants trapped behind the paper can also leave scratches that prevent proper display. Since print defects can appear at any time, having spare ink cartridges on hand will allow you to get back to work immediately if your supplies are defective. Many of the second potential causes of lines and streaks in your exit. Especially lasers and fusers. Can pose a safety risk to well-intentioned but unskilled people. If you are NOT sure what you are doing under the lid, put the tools aside and leave the work to a specialist.

What to do if the printer prints with stripes

Printers are used by a huge number of people, and often freelancers also need to print something to work. But, as with any technique, some problems may arise with them. At some point, the print quality of the printer declines, or you may find that your inkjet or laser printer prints with stripes.

Find out what to do in this case with your own hands, and in which case it is better to send it for repair.

What to do if the printer prints with stripes?

A sign that for different devices (inkjet or laser) there are reasons for problems of this kind and methods for solving them. That is why it is worth considering them from different angles and in different sections. If you have a laser printer, you can safely scroll the article below to the corresponding subheadings.

While some tips for inkjet printers might be helpful.

What to do if an inkjet printer prints with stripes

If you notice poor ink supply, you should stop printing and refill the cartridge. When there is no ink, do not perform the nozzle test, as this may cause nozzle burnout.

Nozzle test

If you find that the ink tanks are intact, but there are streaks when printing, it is worth performing a nozzle check. To do this, go to Start. Devices and Printers, right-click on the desired device and select Printer Properties from the drop-down menu (if not Win7, then just Properties).

In the window that opens, click Settings, go to the Service tab and there you will find the Nozzle Check button.

Did you notice gaps on the test page? It is reasonable to assume that the nozzles are clogged and need to be cleaned using the software method.

If unsuccessful attempts to clean, try manual cleaning. This case is quite unpleasant and requires a lot of time and patience when troubleshooting, and in some cases it is better to contact a specialist.

If it doesn’t help, then follow the further recommendations.

Align printheads

Have you refilled the cartridge, tested the nozzles, and the print is still blurry, you notice blurry printing and all kinds of stripes? Try calibrating the printhead now, as it may well be out of calibration.

This can usually happen when, for example, you were driving the printer and there was a shaking, and subsequently the carriage moved. In this case, select “Align printheads” in the same Service tab as in the previous paragraph.

Encoder problem

A defect with white stripes at the same distance from each other indicates contamination of the tape or encoder disk. There are different degrees of disc clogging, and this affects how wide the stripes will be.

The encoder can be seen on the left side of the paper feed shaft. It is presented in the form of a transparent circle with markings applied to it. Dashes on the encoder can become covered with dust particles or dry ink particles, as a result of which the sensor does not perceive them, and the letter is then positioned incorrectly. You should wipe the disc with a soft cloth, having moistened it beforehand, for example, “Mister Muscle” for wiping windows with ammonia in the composition.

An encoder tape and a special sensor are designed for positioning the carriage. In case of contamination of the encoder, parts of the text may go to the side at equal intervals. The ribbon is located along the main sheet feed shaft. It looks like a transparent line with a dash. Wipe it with care, as it can fly off the mounts, which will add difficulty.

What to do if a laser printer prints with stripes

But laser printers also DO NOT work around the problem, but in this case, most often the problem is associated with a malfunction of parts of the cartridge.

NO toner left

Often times, streaking occurs during printing due to the condition of such an important component as the cartridge. If you see white streaks stretching over the entire length of the page, and their width increases with each subsequent print, then it is safe to say that you are out of toner and need to refill the cartridge.

Fall damage

Probably the problem appeared when you accidentally dropped the cartridge on the floor or hit it on a hard surface, remember? If this was the case, it is quite possible that the rubber bands, which retain the powder and have the property of compaction, did not withstand the impact. In this case, the toner from the damaged area simply crumbles and leaves traces on the paper.

In this case, the longitudinal stripes are of different widths and occur anywhere. With such a problem, repairs are inevitable. over, the cartridge may need to be replaced.

Waste Toner Box Overflow

What if a laser printer prints with stripes? If you notice dark dots, spots and lines that grow and merge into stripes during the printing process? This may indicate that waste toner elements are scattered from the hopper, which may be overfilled with them. This means that your bunker is very dirty, and you should refill the cartridge using the services of a special service center.

The image drum is worn or damaged

When the drum is worn, a black stripe of intermittent appearance appears along the edges of the paper, and its pattern is repeated at the same time. Wear consists in erasing a thin layer of varnish with increased light sensitivity by writing.

Mechanical damage to the drum is also possible. There is dust, paper clips, and other foreign objects. So black dots and lines appear, seemingly chaotically scattered over the paper. But they actually repeat themselves more than once.

Toner particles and squeegees can further damage the drum, resulting in increased defects and black streaks, which will definitely reduce print quality. Excess toner is poured into the cartridge and into the printer itself, and the squeegee is NOT able to remove the powder. Rebuild cartridge.

Dispensing blade

Cyan streaks may be visible during printing. This means that the metering blade is not installed correctly and is leaking too much toner. Therefore, the cartridge must be refilled correctly.

Also, when the blade is dirty, the clearance in some areas of the surface is reduced and the toner is difficult to pass. Then pale and even white stripes appear in the longitudinal direction. Check how the blades are installed or Contact a specialist.

Drum and primary charge roller

There are situations when the powder spills out when filling the hopper and remains inside the cartridge. Toner will clog the drum contacts, producing gray streaks. Also, the contacts of the so-called primary charge roller are clogged, which forms black stripes located across the sheet. In addition, the drum begins to wear out, which is why stripes appear along the edges of the sheet.

The damage described above can also occur if the cartridge is overfilled with waste. This is where toner residue gets inside and erodes the roller surfaces.

A few more pressing issues can be seen in the video below. tips from professionals:

Conclusion

In conclusion, we can say that it is easy to see defects, but to understand the nuances is already more difficult. If you don’t make sense at all, it’s better to show the specialist the page with printing defects. He will determine and give you information on what to do if an inkjet or laser printer prints with stripes specifically in your case.