Where to Find the Printer PIN

WPS PIN code. What is WPS

WPS is an innovation that simplifies the wireless connection process. It stands for Wi-Fi Protected Setup. The function can be called differently, for example, QSS. Quick Security Setup (fast secure connection), in fact it is the same.

WPS on the router is needed to configure the connection of each device with a single keystroke. QSS is NOT different from WPS. only in name.

The wireless network on the adapter is accompanied by the following settings:

  • Changing the network name and password;
  • Task of the required settings via the router interface;
  • Distribution of passwords to each user of the wireless space and their change.

When this button is pressed, new connection settings are constantly generated, which are no longer used the next time. This is convenient when you connect several users to one session without constant network access.

We note that today the wps mode has been corrected to the best of its ability, therefore, the correct operation is complemented by non-trivial settings for clients’ devices with “ancient” or incompatible with the software mode. Wi-Fi is often manually configured using the usual standard method.

Establishing a WPS connection using a button

To activate the quick connection mode, press “WPS” on the router. Also, this button can be indicated by two rounded arrows pointing at each other. The router will inform you that the corresponding LED is flashing. The “Wi-Fi Protected Setup” mode will be active for 1-2 minutes, depending on the model of the device used.

Within this period of time, press a similar button on the device, which you want to connect to the wireless network. When the devices recognize each other, data will be exchanged and communication established. If the router or external Wi-Fi device has such a button, you can initiate the connection programmatically. To do this, go to the hardware settings and activate the Required function. For example, in Windows it will be enough to select the wireless network to which you want to connect. In the case when this function is already activated on the router, you will need to enter passwords.

No PIN

Press the “WPS” button on the device panel. Hold it down for about a few seconds until the indicator does NOT flash. Next, approach the router and immediately click on the same button there. After that, the indicator should blink and connect to the router.

With PIN

First, we need to find out the PIN, for this they hold down the WPS button for 10 or more seconds. A letter with a report will be issued with the required value. Next, hold down the BBC button for 3 seconds until the indicator flashes. Now from the laptop we connect to the new printer grid and enter the Corresponding PIN.

Differences between WPS and QSS

In wireless routers from TP-Link manufacturer, the WPS function has a different name: QSS (Quick Secure Setup). The principle of the technology is NOT different. There is a similar button on the back of TP-Link routers, and the PIN also consists of 8 digits. You can change the QSS settings in the control panel, menu “QSS function”.

After clicking the “Add device” button, a page will open where you can enter its PIN-code. You can also select the second item and use the button on the device for the next two minutes.

Vulnerabilities in WPS technology

The most common method of hacking wireless networks is by guessing client PIN-codes. Serious vulnerabilities in this protocol were discovered already in 2011. Since then, a large number of programs have been developed that allow brute-force to find out the PIN code of the required equipment. At the same time, the number of possible options is only 11,000, so you can pick up a password in a few hours.

With older models of routers, the situation is much more complicated. manufacturers often used the same PIN codes. This allowed the attacker to use standard password databases to crack old Wi-Fi routers. In modern routers, protection against WPS hacking is implemented by means of firmware. If the password is entered incorrectly multiple times, a temporary lock can be set.

Options to find “pin

    During the display of such a notification window, if there is a monitor on the printer body, the PIN code will be displayed on it. Pay your attention to this “moment”. Also, as an option for getting wps, you can print a test or sample sheet. In many models, this information is displayed there. To do this, you can use the device menu on the case or the buttons. In the second case, hold down the Cancel key until the green LED starts flashing. Only then Let go.
    The pincode changes over time. For many devices, the duration of action is no more than 90 seconds. The buttons on the body of a printer or router can be in very different places. They may require thin objects such as a safety pin or paper clip to press them. In many routers, WPS support may be disabled by default. Look online or for technical instructions on how to change this. Most likely, you will need to enter the settings via the web interface.

How to find your HP printer pin

If the password (PIN-code wps) needs to be learned for the HP brand printer, then the user should follow these instructions:

  • Turn the device towards you with the side with which the power on and off button is located, as well as the inputs and outputs;
  • Find a small hole on the panel, which is a button designed to receive a code;
  • Load a sheet for printing, since the necessary data will be printed;
  • Take a pen, pencil or other thin object that can easily pass through the hole you have found;
  • Put the picked up object into the hole, after which he will press the button hidden there;
  • After pressing the button, the device will start printing, and the WPS code will be displayed on the received sheet of paper.

After performing the above operation, you do not need to do anything for a while. After waiting about 5-10 minutes, you can enter the received information in the computer window, Connecting the printer to the PC.

How to find the pin code for a Cannon printer

To find the code for Canon equipment, to connect wirelessly to a computer or laptop, you need to do the following:

  • Find the Stop button on the printing device, and pressed it, hold it until the indicator does NOT flash 15 times, it should flash orange;
  • Release the Stop key;
  • Wait until the required data is printed on the paper letter;
  • Enter the received code value on the display of the device to which the printer will be connected
  • To proceed with the settings, follow the instructions and prompts that appear on the screen;
  • After completing the settings, press and hold the Stop button again, but there should already be 16 flashes;
  • See what kind of light the indicator is on (if the blue lights up, then the setting was successful).

How to find out the vps pin code of Samsung

To find the above described password for Samsung wireless printer, the user will have to follow these steps:

  • Look at the label located under the body of the device;
  • Find an 8-digit digital code on the stickers;
  • If the sticker on the case has been removed, press the WPS button on the device, holding it slightly;
  • Wait for the indicator to flash, then press the identical key on the router;
  • Press the BBC key, holding it for 10 seconds, wait for the report, which will be printed on paper;
  • Enter the received Numerical value on a laptop.

In the same way, wireless printers of second brands can also be obtained and connected to a PC.

How to find the pin code for an Epson printer

To find the code for the Epson technique, and then connect wirelessly to a computer or laptop, you need to do the following:

Enter the Wi-Fi setup menu. By doing one of the following depending on your printer. Press the button to return to the main screen if necessary.

Way 1Select WI-FI Setup
way 2Use or buttons to select WI-FI setting and press OK button
way 3Use or buttons to select WI-FI setting and press OK button
way 4Tap in the upper right corner of the LCD screen, then tap Wi-Fi Settings

Select PIN Setting (WPS) / PIN Code (WPS).

Enter the PIN displayed on the printer LCD into the utility software of the wireless router (access point), and then click Continue or OK.

When the setup completion message appears, Wi-Fi setup is complete.

How to find the pin code of a Kyosera printer

To find the code for the Kioser technique, set up a wireless connection to a computer or laptop, you need to do the following:

Press the wireless setting button located on the back of the machine for 3 seconds or more as shown in the figure below.

Use a pointed object such as a ballpoint pen to press the button.

The printer will print a letter of paper with an 8-digit PIN and start searching for an access point within 5 minutes.

Using a computer connected to the network, enter http: // access_point_ip_address / in your browser. (Where access_point_ip_address is the IP address of the device that is used as the registrar 1) Go to the WPS (Wi-Fi Protected Setup) settings page and enter the PIN code from the printed page to the registrar and follow the onscreen instructions.

The registrar is usually an access point / router.

The setting page differs depending on the brand of the access point / router. See the Operating Guide supplied with your access point / router.

If you are using a Windows Vista ™ computer as a Registrar, please follow the instructions below.

  • Click Start and then Network.
  • Click Add Wireless Device.
  • Select your printer and click Next.
  • Enter the PIN from the printed page and click Next.
  • Select the network you want to connect to and click “Next”.
  • Click Close.

Wait for the Ready LED (Go button) of your printer to indicate that the connection is successful. (See table below). This means the device has successfully connected to your access point / router. You can now use your printer on a wireless network.

If the LED indicates connection failure (see table below), the device is NOT successfully connected to the router or access point. Try to start over.

If the same message appears again, please return your device to factory default settings and try again.

How to find the WPS PIN for your Brother printer

To find the code for Brother technology, to connect wirelessly to a computer or laptop, you need to do the following:

When you go to the WPS Wi-Fi connection settings, the printer should tell you the PIN to connect on the LCD.

  • Click “Menu”.
  • Go to and select “Network”.
  • Go to and select “WLAN”.
  • Go to and select “WPS with PIN”.
  • When “Network I / F switched to wireless” is displayed, click “OK”.
  • The LCD will show an 8-digit PIN and the machine will search for a WLAN access point / router within 5 minutes.

Further actions

We already have the code on hand, but what should we do next? Wait a little at first, as pressing this button forces the device to search for nearby wireless access points to the network. An attempt will be made to connect within five minutes.

Using a computer connected to the same network as the printer, enter the data into the browser that will advise the value of http: // access_REGIP / (Do not rush to press the search button or Enter. the data is not entirely correct yet). REGIP is the IP address of your router to which you are connecting.

Next, you will be taken to the WPS page of your router. We find the Registar pin-code fields there and enter the data following the information printed on the page. Further actions can be performed according to the instructions that will be displayed on your screen.

Alternatives

If you find out nothing, then click “Cancel” and start the installation in manual mode. To do this, make sure you have a WPS indicator and button on your router. The printer may NOT have this button if it has a built-in menu screen. This is where you need to look for the desired setting that should be activated.

WPS pin for HP printer

First, you need to turn the laserjet printer to the side where the power button and I / O for connecting this device are located. There you will find a small hole. this is our cherished button for obtaining a pin code.

Here are the necessary steps for a successful outcome:

  • Load one sheet of paper into the tray first. Since the code will be printed, we need print space.
  • Take a thin object (usually a pen) that could fit into that small hole.
  • Insert a thin object into the hole (this is a button that specially grooves in order to avoid accidentally pressing it).

If you did everything correctly, then immediately after pressing, printing will begin and on the sheet, as you loaded it into the receiving tray, the WPS pin code for the printer will be printed.

Wps PIN for HP, Canon, Epson, Samsung, Kyocera or Brother printer

Wireless printers have become reliable human assistants, allowing you to work faster and more comfortably. These devices, connected to a computer via a wireless network, have special pin codes, only after entering which is it possible to correct work.

For devices of different brands, the password data is identical, but how to find out the PIN code for a printer, be it HP, Canon, Samsung, Epson, Kyocera or Brother, should be considered in more detail.

READ  How to reset toner on a brother printer

Wi-Fi Protected Setup (WPS) is a network security standard used to create a secure wireless home network without the need to know the SSID or password of the network.

The WPS PIN method can be used if the button is not available. The PIN number is displayed on the printer’s LCD screen and can be entered into the router to create a wireless connection.

What is the WPS button on the router for and how to use it?

The button is needed to activate the WPS technology. There is such a button on almost all routers. It is usually signed by WPS. It looks something like this (on an ASUS router):

NOT rarely, the button is combined with the reset function of the router. This is very common on TP-LINK routers.

And on new routers from ZyXel, the WPS enable button looks like this:

In any case, finding such a button on the body of your router is not at all difficult. Well, if it is not there, then go to the settings of the router, and look for the corresponding item in the control panel (below in the article, I will show you how to do this).

The function is activated at the touch of a button. In the case of my ASUS router, you need to hold the button for 1 second. When the WPS function is activated, the indicator on the router will most likely flash. The power indicator on the ASUS router is blinking. Some routers have a separate indicator, usually in the form of a padlock. The function is activated for a while, then the indicator stops flashing. It can be reactivated simply by pressing the button.

About connection technology

WPS (Wi-Fi Protected Setup) is a technology of “convenient” connection to Wi-Fi networks. Instead of a big and terrible password, when using it, it became possible to connect to Wi-Fi networks using a short digital PIN code or even without it.

This is especially convenient when using devices that are clearly not intended for input from them. printers, repeaters, televisions, etc. Yes, even on a computer. you don’t have to remember the password, but just press a button on the router, and the connection will become passwordless.

But what if you still need a PIN? Where to get it in this case? We will talk about all the options below.

WPS button on the router. what is it?

WPS (Wi-Fi Protected Setup) has been around for a long time, so your router most likely already has this feature. The WPS connection activation key is located on the body of the device distributing the wireless network, and it is indicated by either the WPS signature or the Wi-Fi icon.

How to connect to Wi-Fi without entering a password via WPS (QSS)?

We figured out the activation of the technology on the router, let’s now look at the process of connecting different devices.

Ways to connect to a Wi-Fi network without entering a password (via WPS):

  • When the WPS button is on the router, and on the device that you are connecting. For example, an external USB Wi-Fi receiver, then just press the button on both devices and the connection will be established.
  • If the device you want to connect to Wi-Fi has a mechanical button, but it is not on laptops, smartphones, tablets, etc. Then WPS is activated by a button on the router, and on the computer, for example, the connection is automatic. On mobile devices, in the settings, simply select the connection using WPS. It all depends on the specific device.
  • There are some models of routers that have WPS buttons. But, this does NOT mean that the technology is not supported. In any case, you can activate this technology through the settings of the router.
  • Connection using a PIN code. In the settings of the WPS function, a special PIN code is set, with which you can also connect devices. Just by choosing the Appropriate connection method, and indicated the code.

Connect a computer (laptop) on Windows 7, 8, 10 to Wi-Fi via WPS

Everything is very simple here. Open the list of networks available for connection on the computer, select the required network, and click on the “Connect” button.

A password entry window will appear. And below, there should be a message “You can also connect, I pressed the button on the router.” You may have to wait a couple of seconds for this message to appear.

Now, press the WPS button on the router, and the computer will connect to Wi-Fi without entering a password.

That’s it, you can use the wireless internet connection. You do not need to disable anything on the router.

If you have an adapter with a WPS (QSS) button

For example, I have a WPS button on my ASUS router, and a QSS button on a TP-LINK USB Wi-Fi adapter.

Go, when you press the button on both devices, a connection should be established. It is, but as far as I understand, the proprietary utility of the Wi-Fi adapter must be installed on the computer. It is located on the disk, which is included in the kit. You can also download it from the official website for your adapter model.

WPS connection for Android smartphones and tablets

To connect to Wi-Fi without entering a password on Android, you need to go to the Wi-Fi settings, select Advanced settings, then select a connection with WPS implementation, and press the button on the router. Smartphone or tablet will automatically connect to Wi-Fi network.

On different devices, these settings may look different. But the procedure will be the same. There you can also choose to connect via WPS with the introduction of a PIN code.

Even when connected to Wi-Fi of Philips TV (Android TV). You can use WPS technology.

As for iOS (iPhone, iPad, etc.). Then as far as I understand, there is support for WPS. If I’m wrong, if you know, then write me in the comments.

About the sticker on the bottom

If you just bought a router, and it already offers you to use the pin code when connecting, look at the bottom and carefully look at the sticker:

This code comes straight out of the box. Doesn’t fit? Try to reset the router to factory settings (it will kill the entire Internet, and do not perform if I do not understand anything in the router settings). And if it doesn’t fit at all? Then you need to go into the settings.

Enabling and entering your code

You can disable WPS completely or change its password in the settings of your router. To do this, you need to enter it and change it. everything is very simple. Don’t know how to enter the settings? It will not be possible to tell about all the models in one article, so I strongly recommend that you find your exact model in the search on our website. There will definitely be ready-made instructions for entering and basic setup.

After entering, you need to find the desired section. It looks like this to me:

Please note that it is now disabled (why I do this. I’ll tell you below). If necessary, you can enable and change the password, and if necessary, connect an external device by entering its code through the “Add device” button.

Wi-Fi security key (PIN) and other factory information

What information can be found on the router:

  • The network name, or SSID, is the factory name for the Wi-Fi network. It can be useful in order to find your network among neighboring networks. As a rule, it looks something like this: “TP-LINK_3Ao8”. Of course, on devices from TP-Link.
  • Wi-Fi Password, Wireless Password, PIN, WPS / PIN is the factory key to access the wireless network. It usually consists of 8 digits. But it can be more complicated. After entering the router settings, I advise you to change the factory password, as well as the network name.
  • Router address (IP, web addresses). this address is needed to enter the router settings. It can be like an IP address, usually 192.168.1.1. Or 192.168.0.1. And hostname (from letters). For example: tplinkWi-Fi.Net, my.Keenetic.Net, miWi-Fi.com. At the same time, access by IP address also works.
  • Username and password (Username, Password). factory login and password, which must be specified on the authorization page when entering the settings of the router or modem. Usually, in the process of configuring the router, we change them.
  • The MAC address can also come in handy. Especially if your ISP binds by MAC address.
  • Router model and hardware version (Rev, H / W Ver). can be useful, for example, to search for firmware, or other information.
  • F / W Ver. the version of the firmware installed at the factory. Not specified in all devices.

Using the TP-Link router as an example

The numbers from the screenshot correspond to the list you can see above. On all devices from TP-Link, the factory information is on stickers on the bottom of the router.

Factory information on ASUS router

Please note that on ASUS routers, the password will be signed as “PIN Code”. And the network will most likely be called “ASUS”.

Wi-Fi password on the D-Link router case

On D-Link devices, factory information looks something like this:

Security key and other information on ZyXEL

Small feature. Zyxel Keenetic does not have a username and password from the factory, which must be entered when entering the control panel. The router will prompt you to set your data immediately after entering the settings.

Address, password, MAC addresses on Tenda routers

Everything is standard in Tenda. Unless the name of the Wi-Fi network is indicated, and the username.

Totolink

On my Totolink router, some of the information is printed on the case.

A MAC address, model, hardware version and as far as I understand the serial number is indicated below, on a small sticker with a barcode.

Information on Netis Router

The address to enter the settings: netis.Cc. But everything seems to be standard: MAC, SSID, Password.

How to connect the TV to the network using WPS

Wi-Fi Protected Setup, or WPS for short, is a more simplified way to connect to the Internet through a smart TV. As a rule, setting up a network connection, especially for users who are faced with such a task for the first time, turns into an unbearable problem, especially if the password is forgotten.

The peculiarity of this method is that there is no need to know the pincode. All the user needs is direct access to the router. In addition, you will need to carry out a few simple manipulations. In particular:

  • Go to the device menu, find the sub-item where the network parameters are indicated and select “Connect using WPS. PBC”;
  • Further, without wasting time, go to the router, find and press the button on it with the inscription “WPS”. This must be done quickly, Until two minutes have passed. Although, before proceeding with this procedure, it is recommended that you make sure that the device supports this function by default. If you are not sure, go to the web interface and Connect it. As a rule, this key is very small, and is located on the back of the device, after examining it carefully;
  • If everything is good, then in a second the Internet will be connected on the TV.

It is worth clarifying that you can configure the Internet in this way only if the device has a standard pin, that is, the factory settings have not changed. If the router is NOT new, then the settings can be reset to factory settings using the “Reset” key. To make it work for sure, it is advisable to hold the button for a few seconds.

Forgot LG TV password

Different companies set different codes on TVs and the methods of resetting to factory settings are different. Therefore, it makes no sense to carry out a similar operation using the method from TV Samsung.
The standard pin code on LG TVs is 0000. But in some cases, you can try another option. 1234.
If you need to unlock TV with basic settings, you just need to enter these combinations and enjoy watching. Problems arise when the user forgets the password he invented.

If the standard TV pin-code was changed to an individual one, and then it was forgotten, then the solution to this problem is to press the menu button, go to the settings, select the “Security” section. There should be a function to reset the pin code. Next, you will need to set a new password on the TV.

After completing the operation, you will have to do a few more steps:

  • Enter any numbers and confirm them by pressing the OK key.
  • Drive a combination: up, up, down, up.
  • Set password 0313 and press OK.

After performing THESE actions, the pin will become standard. The method is useful if you have access to the menu.

Otherwise, you will need for a push-button remote control:

  • Press the power button and turn off the TV;
  • Enter the combination: Mute, 8, 2, 4;
  • Turn on TV.

The order of actions on the Smart remote to unlock the TV if you forgot your password:

  • Turn on TV;
  • Press Mute, Volume Up, Return, Volume Down, Return, Volume Up, Return.

Forgot your Samsung PIN

You may need a PIN code or password from Smart TV Samsung in two cases:

  • The user wants to lock the Samsung TV or SEPARATE channels (parental control system). This is convenient if there are small children at home who need to hide unwanted content.
  • The Samsung device has already been locked, and the person cannot remember the code.
READ  How to scan a document with a kyocera printer

To find out that Samsung TV is locked, just look at the monitor. A window with fields for entering a four-digit number will appear there.

To remove restrictions, you need a remote control. You can also use a smartphone with a downloaded “Remote” application. Without THESE devices, attempts will be in vain.
To find the pin code for your Samsung TV, you need to study the instruction manual. There should be a separate section dedicated to this issue.
If the user has NOT changed the data on his own, then the Samsung TV pin code will be the standard. 0000 (less often use. 1111). By entering the numbers, the TV is unlocked and you can continue watching.
In case you forgot the previously set code, you need to rollback TV to the factory settings to return to the standard option (0000).

To reset the code, you can use the push-button remote control:

  • Turn on TV device.
  • If Samsung TV is older than 4 years, hold down the “Exit” button on the remote control for a few seconds. A new window will open.
  • If the Samsung TV is new, the factory reset is different. In order, you will have to press the following keys: Mute, 8, 2, 4, Power.

The keys must be pressed quickly, otherwise the combination will NOT work.

Factory reset with touch panel:

  • Press the power button.
  • Lead the following combination: Mute, “plus”, update key, “minus”, “update”, “plus”, “update”.
find, printer

If the first time it did not work to return to the factory settings, you need to try again. The buttons will need to be pressed very quickly until the operation is successful.

Advantage and safety

The basic feature of the WPS mode on a router is ease of activation. WPS technology has been developed and is still being developed to this day precisely in order to make the connection easy for the user.

The wireless network is configured through the router interface, and the formation of the name and PIN-code is performed automatically, it is not necessary to enter it when entering the network. To install a digital device to the adapter, knowledge of such settings is NOT required.

The WPS function on the router is launched with a light short press. The device receives a connection request, using this technology we activate the mode on the adapter and wait for a while. The connection to the network is automatic. The button provides a continuous WPS connection at a higher speed (according to the developers).

We are talking about routers that have hardware connectivity. In the absence of a mode, we will definitely understand the settings, make a connection through the personal account of the device. Customers require a PIN password. If we talk about data transfer speed, then the difference. with or without WPS. is practically lacking. In simple terms, WPS works like Wi-Fi, only a shorter path is used to establish a connection.

Setting up a connection using this function is complicated when the device is NOT equipped with WPS connection establishment technologies. However, security in this connection is an important issue.

Most devices have a PIN-enabled connection. This method is more vulnerable in comparison with other methods of PROVIDE Wi-FI to the client. The code consists of only 8 digits and has a limit on the number of possible password variations. Hacking is carried out by selection. The WPS connection is NOT highly secure. For high-quality network defense against hacking, we use more reliable methods of providing network access.

Everything about setting and changing the printer password

Printer. the device is quite simple to use. As a rule, to print documents and photos, it is enough to indicate in the window that appears when the device is connected which file to print and in what quantity. Almost the same happens when transferring data from a phone, for example, or a laptop.

And yet, sometimes a situation arises when a working printer asks for a password.

Network password

When wireless devices work together. phone, computer, printer, you need to find out the network code. The ISP must provide the User with the Required Code. As a rule, you can find it in the contract documentation, or find out by examining the router itself. the code is indicated on the label.

Connecting a network printer

If the latter is lost and the documentation is not currently available, you can find out the code for Canon or HP by looking at it on any other computer that is already connected to the network. To do this, follow these steps:

  • In the Windows 10 operating program, open the item: “View network connections”;
  • Clicking on the name of your network, click on “Status”;
  • Find the tab “Security”, then in the tab check the box next to the item “Display input characters”. After this, the code becomes visible.

This way you can find out the password from the Canon printer and enter it when the machine asks for it.

User creation

If the device asks for a code when connecting to a local network, you can try to solve the problem in the second way. Creates a new user who is given all Possible permissions. Then the device and the computer are rebooted accordingly to activate the user and work on his behalf.

In addition, when creating a new user with advanced capabilities, it is recommended to launch the local group policy editor:

  • Through the “Start” menu open the “Run” tab and enter the command gredit.Msc;
  • In the “Computer configuration” menu select “Windows configuration” and the sub-item “Security settings”;
  • In a new window, they find a section in which user rights are assigned. in Windows 7 or Windows 10 it has a different location, and the following values ​​are removed from the “Guest”: “Denied access to the computer from the SUPPORT_388945a0 network” and “Deny local input SUPPORT_388945a0”.

As a rule, after loading the editor, the device does NOT ask for a code.

In some cases. for example, when using the HP Deskjet 2540, it is enough to disable the wireless direct with security system.

Regardless of the operating system used. Windows 10 or 8, you can try reinstalling the actual network printer. To do this, uninstall Installed, download the newest drivers that you can find. During installation, be sure to specify in detail the path to the personal computer, and also indicate the new port and the name of the printing device. During root reinstallation, the instrument will most likely stop asking for a password. In the photo. checking the network code.

Checking the network code

If this did not help, and the HP Deskjet 2540 or Canon still asks for a code, the user can log out of the account, if logged in under it, and log back into the system under the local account. After that, the computer needs to be restarted.

Another prerequisite for a printer requiring a password may be the lack of a domain. In this case, a network printing device of the client is created on the computer with the same name and password as in the refusing to work.

Installing code

Sometimes the device needs a code to work NOT later, that something unexpected happened, and then that access to the use of the device is limited. To save consumables in offices where access to the device is free, thus limiting its use.

Setting up the code for use is a simple procedure:

  • Download software. eg. Printlock;
  • Install the program on the control panel connected to the device;
  • Enter password.

After that, when you try to use the printing device, a window will open and ask for a password when connecting the printing device.

The computer of the user who is allowed access to the device should also be configured:

  • Enter under the administrator’s account and by clicking “Start” find “Printers and Faxes”;
  • On the name of the device to which access will be restricted, right-click. In the “Properties” menu that opens, select the icon for the printing device, click and find “Settings”;
  • Select the user account in the “Groups”, check all the “Allow” fields;
  • Highlight the remaining names in the “Groups” and check the “Deny” terms.

The password for Canon or any other printer is randomly assigned. A more complex combination than your own name or birthday is recommended, otherwise, even if the printing device asks for a code, access to it will be open.

What code to use to pair your device with Windows

Some wireless devices have their own pairing code (sometimes referred to as a “PIN” or “passcode”). You may be asked to enter this code when pairing your device with your computer.

Windows tries to choose the best way to pair with the device and provides instructions, which often include a pairing code. However, some wireless devices have their own code, which you need to find.

Even if the pairing code is known, it can be difficult to enter it into the device. Some wireless devices, such as mobile phones, have a numeric keypad that you can use to enter a pairing code and a screen to check if the code is correct. Other devices, such as Bluetooth headsets, do not have a numeric keypad or screen.

Here are some tips for finding a pairing code for a wireless device:

  • View device documentation. The pairing code can be provided in the documentation or printed directly on the device (usually at the bottom). But not all wireless devices come with this code.
  • If Windows is having trouble pairing, the system might, will offer to create your own code. If you choose this option, the code that came with the device must be used.

Here are a few tips for troubleshooting a pairing code entry for a wireless device:

  • Make sure the device you want to pair with, is on, its battery is charged, and the device is NOT in standby mode (sleep mode).
  • If you entered a code for a device, but Windows cannot detect it, the device may need to enter a code, pressed a button called “Enter”, “OK”, “Return” or something similar. On some devices, such as mobile phones, you may need to select the Match option from the menu to enter the code. If you cannot find a button or option in a menu, refer to the device documentation or visit the manufacturer’s website.
  • Make sure that Entering the pairing code DOES NOT TAKE A LONG TIME. Usually there is only 30 seconds for this, after which the device or computer will stop pairing. The exact amount of time depends on the device.
  • Make sure that the device can display the pairing code. Some devices, such as headsets, can tell Windows that they can display a code, even though the display for displaying it is commentary. If so and Windows asks you to check the code displayed on the device, try pairing with the device again. The next time you pair with a device, Windows should prompt you to select a different pairing option. If you are NOT sure which option to choose, refer to the product documentation or visit the manufacturer’s website.
  • If you are within the reach of second wireless devices, there is a possibility of unintentionally pairing with someone else’s device (for example, a person with the same mobile phone model is nearby). Make sure that pairing with the desired device.
  • In a public place, it is possible for multiple devices with the same name to be within reach of the computer. If you have multiple devices with the same name in the Add Device Wizard, you might need to rename some of them to distinguish them. To rename a device, Right-click and select Properties. In the tab are common enter a new name and click OK.
  • Windows system has to offer check if the same code is entered on the device and the computer. If the codes do NOT match, or the code does not appear, you may be inadvertently pairing with someone else’s device. In this case, Windows may NOT display the pairing code at all, or display an error code. Make sure you pair with the correct device.
  • For some wireless devices, it may need to be activated special pairing mode, allowing computers or other devices to connect to them. Most Bluetooth devices go into this mode when they are made visible. Secondary wireless devices may need to be in manual pairing and discovery mode. See your device documentation or visit the manufacturer’s website for more information.

Wps PIN for HP, Canon, Epson, Samsung, Kyocera and Brother printers. Wps PIN for HP, Canon, Epson, Samsung, Kyocera or Brother printer

Wireless printers have become reliable human assistants, allowing you to work faster and more comfortably. These devices, connected to a computer via a wireless network, have special pin codes, only after entering which is it possible to correct work.

For devices of different brands, the password data is identical, but how to find out the PIN code for a printer, be it HP, Canon, Samsung, Epson, Kyocera or Brother, should be considered in more detail.

Wi-Fi Protected Setup (WPS) is a network security standard used to create a secure wireless home network without the need to know the SSID or password of the network.

The WPS PIN method can be used if the button is not available. The PIN number is displayed on the printer’s LCD screen and can be entered into the router to create a wireless connection.

How to connect PC to printer via wps Wi-Fi

Having learned the pin code for the connection, you can start creating a pair between the PC and the printing equipment. To connect the printer via Wi-Fi and set up printing on it correctly, follow the instructions, follow the link.

READ  Printer saves files but does not print

You have to take several steps to activate the wireless network on the printer, configure the router, directly configure and copy device drivers in the Windows operating system.

But to do this, you need to know the PIN code itself. and more on this later in our article.

How to find your HP printer pin

If the password (PIN-code wps) needs to be learned for the HP brand printer, then the user should follow these instructions:

  • Turn the device towards you with the side with which the power on and off button is located, as well as the inputs and outputs;
  • Find a small hole on the panel, which is a button designed to receive a code;
  • Load a sheet for printing, since the necessary data will be printed;
  • Take a pen, pencil or other thin object that can easily pass through the hole you have found;
  • Put the picked up object into the hole, after which he will press the button hidden there;
  • After pressing the button, the device will start printing, and the WPS code will be displayed on the received sheet of paper.

After performing the above operation, you do not need to do anything for a while. After waiting about 5-10 minutes, you can enter the received information in the computer window, Connecting the printer to the PC.

How to find the pin code for a Cannon printer

To find the code for Canon equipment, to connect wirelessly to a computer or laptop, you need to do the following:

  • Find the Stop button on the printing device, and pressed it, hold it until the indicator does NOT flash 15 times, it should flash orange;
  • Release the Stop key;
  • Wait until the required data is printed on the paper letter;
  • Enter the received code value on the display of the device to which the printer will be connected
  • To proceed with the settings, follow the instructions and prompts that appear on the screen;
  • After completing the settings, press and hold the Stop button again, but there should already be 16 flashes;
  • See what kind of light the indicator is on (if the blue lights up, then the setting was successful).

How to find out the vps pin code of Samsung

To find the above described password for Samsung wireless printer, the user will have to follow these steps:

  • Look at the label located under the body of the device;
  • Find an 8-digit digital code on the stickers;
  • If the sticker on the case has been removed, press the WPS button on the device, holding it slightly;
  • Wait for the indicator to flash, then press the identical key on the router;
  • Press the BBC key, holding it for 10 seconds, wait for the report, which will be printed on paper;
  • Enter the received Numerical value on a laptop.

In the same way, wireless printers of second brands can also be obtained and connected to a PC.

How to find the pin code for an Epson printer

To find the code for the Epson technique, and then connect wirelessly to a computer or laptop, you need to do the following:

Enter the Wi-Fi setup menu. By doing one of the following depending on your printer. Press the button to return to the main screen if necessary.

Way 1Select WI-FI Setup
way 2Use or buttons to select WI-FI setting and press OK button
way 3Use or buttons to select WI-FI setting and press OK button
way 4Tap in the upper right corner of the LCD screen, then tap Wi-Fi Settings

Select PIN Setting (WPS) / PIN Code (WPS).

Enter the PIN displayed on the printer LCD into the utility software of the wireless router (access point), and then click Continue or OK.

When the setup completion message appears, Wi-Fi setup is complete.

How to find the pin code of a Kyosera printer

To find the code for the Kioser technique, set up a wireless connection to a computer or laptop, you need to do the following:

Press the wireless setting button located on the back of the machine for 3 seconds or more as shown in the figure below.

Use a pointed object such as a ballpoint pen to press the button.

The printer will print a letter of paper with an 8-digit PIN and start searching for an access point within 5 minutes.

Using a computer connected to the network, enter http: // access_point_ip_address / in your browser. (Where access_point_ip_address is the IP address of the device that is used as the registrar 1) Go to the WPS (Wi-Fi Protected Setup) settings page and enter the PIN code from the printed page to the registrar and follow the onscreen instructions.

The registrar is usually an access point / router.

The setting page differs depending on the brand of the access point / router. See the Operating Guide supplied with your access point / router.

If you are using a Windows Vista ™ computer as a Registrar, please follow the instructions below.

  • Click Start and then Network.
  • Click Add Wireless Device.
  • Select your printer and click Next.
  • Enter the PIN from the printed page and click Next.
  • Select the network you want to connect to and click “Next”.
  • Click Close.

Wait for the Ready LED (Go button) of your printer to indicate that the connection is successful. (See table below). This means the device has successfully connected to your access point / router. You can now use your printer on a wireless network.

If the LED indicates connection failure (see table below), the device is NOT successfully connected to the router or access point. Try to start over.

If the same message appears again, please return your device to factory default settings and try again.

How to find the WPS PIN for your Brother printer

To find the code for Brother technology, to connect wirelessly to a computer or laptop, you need to do the following:

When you go to the WPS Wi-Fi connection settings, the printer should tell you the PIN to connect on the LCD.

See p. 20 Brother Network User’s Guides; “Using the Wi-Fi Protected Setup PIN Method”:

  • Click “Menu”.
  • Go to and select “Network”.
  • Go to and select “WLAN”.
  • Go to and select “WPS with PIN”.
  • When “Network I / F switched to wireless” is displayed, click “OK”.
  • The LCD will show an 8-digit PIN and the machine will search for a WLAN access point / router within 5 minutes.

Such a setting does NOT take much time, but it requires attentiveness and strict adherence to all instructions. You can find the 8-digit code in a couple of minutes by using it to connect a wireless connection.

  • Turn the device towards you with the side with which the power on and off button is located, as well as the inputs and outputs;
  • Find a small hole on the panel, which is a button designed to receive a code;
  • Load a sheet for printing, since the necessary data will be printed;
  • Take a pen, pencil or other thin object that can easily pass through the hole you have found;
  • Put the picked up object into the hole, after which he will press the button hidden there;
  • After pressing the button, the device will start printing, and the WPS code will be displayed on the received sheet of paper.

Finding a Printer on Your Computer

Some users sometimes need to adjust the printer configuration. Locate the hardware on your computer before performing this procedure. Of course, it’s enough just to look in the “Devices and Printers” section, but certain equipment is not displayed there for various reasons. Next, we will talk about how to search for printed peripherals connected to a PC in four ways.

We are looking for a printer on the computer

First, you need to connect the hardware to the PC so that it becomes visible to the operating system. This can be done in different ways, depending on the functionality of the device. The most popular are two options. connection via USB-connector or Wi-Fi network. You can find detailed instructions on these topics in our other articles at the following links:

Next, the process of installing the driver takes place so that the device is correctly displayed in Windows and functions normally. There are five options for performing this task in total. All of them require the user to perform certain manipulations and are suitable in different situations. Check out the material below. there you will find a detailed guide to all possible methods.

Now that the printer is connected and the drivers are installed, you can proceed to the very procedure of finding it on the PC. As mentioned above, the above recommendations will be useful in cases where the peripherals for some reason are not displayed in the “Devices and Printers” section, which can be navigated through the “Control Panel”.

Search the web

Most often, users are interested in finding printers on a computer, who work in a home or corporate network, where all the equipment is connected via Wi-Fi or a LAN cable. In such a situation, it is carried out as follows:

    Through the “Computer” window in the “Network” section, select the required PC, which is connected to your local group.

Double-click LMB to go to the menu for working with the device. There you can view the print queue, add documents to it and set up the configuration.

If you want this equipment to be displayed in the list on your PC, right-click on it and select “Connect”.

Use the Create Shortcut feature to avoid constantly going to network settings to interact with the printer. The shortcut will be added to the desktop.

Using this method, you can find all the devices connected to your local group. Full control of them is possible only with an administrator account. How to enter the OS through it, read our other article at the link below.

Search in programs

Sometimes when you try to print an image or document through special programs, for example, a graphics or text editor, you find that the necessary equipment is on the list. In such cases, you should find it. Let’s look at the process of finding using Microsoft Word as an example:

    Open the “Menu” and go to the “Print” section.

Click on the button “Find a printer”.

You will see the “Search: Printers” window. Here you can set preliminary search parameters, for example, specify a location, select a name and equipment model. After the scan is complete, you will see a list of all found peripherals. Select the necessary device and you can proceed to work with it.

Since the search is carried out Not only on your computer, but also on all others connected to the same local network, the domain service “Active Directory” is used for scanning. It checks IP addresses and uses additional OS functions. In the event of incorrect settings or malfunctions, Windows AD may not be available. You will learn about this from the corresponding notice. For methods of solving auto goods problem, see our other article.

Adding a device

If you can’t find the connected printing hardware yourself, trust the built-in Windows tool. You just need to go to the “Control Panel”, select the category “Devices and Printers” there. In the window that opens at the top, find the “Add device” button. You will see the Add Wizard. Wait for the scan to complete and follow the instructions on the screen.

Before starting this procedure, make sure the printer is properly connected to the computer and turned on.

Official utility of the manufacturer

Some printer companies provide their own utilities for users to work with their peripherals. THESE manufacturers include HP, Epson and Samsung. To perform this method, you need to go to the official website of the company and find the utility there. Download it to your computer, install, then connect and wait for the list of devices to update.

Such an auxiliary program allows you to manage equipment, update its drivers, find out basic information and monitor the overall status.

Today we looked at the procedure for finding a printer on a PC in detail. Each available method is suitable in different situations, and also requires the user to perform a certain algorithm of actions. As you can see, all the options are quite easy and even an inexperienced user can handle them, and not someone with additional knowledge and skills.