Where To Find Your HP Printer Pin

Third way

If the task of how to find out the IP address is still relevant to you, then print a test sheet. For this purpose, open the properties of your device, go to the “General” tab and click on the corresponding button. On the printed page, in several places you can find the current IP address of your printer.

The first way

To find the current IP address of the MFP, you should look at the properties of this device.

  • To do this, open the “Devices and Printers” submenu in the “Start” menu or enter the query “printers” in the built-in search box in the system and select the required item from the displayed results.
  • Then, in the section with printers, find the device connected to your personal computer, and right-click on its icon.
  • In the drop-down list, click on “Properties”.
  • In the window with printer properties, you need to go to the “General” tab and find the term called “Location”. it is there to look and check the current IP address of the printer.

The described instructions are relevant for Windows 7, while in Windows 10 things are a little different.

  • To answer the question related to how to find out the IP address of printers in this version of the OS, you need to go to the submenu with devices and printers.
  • Then find the option you want and open its properties.
  • You can find the information about the device to be printed by clicking the tab with Web Services.
  • There you have to open the “Device Information” section and follow the specified link.
  • On the page that opens, you can find all the information about your printing device. Note that the URL of this page is the network address of the printing machine.

Fourth way

Another answer to the question of how to find out the IP of a printer is related to the introduction of a text editor. As a rule, each such program has the function of printing documents. Therefore, with its help, you can get information that is associated with the network location of the device.

How to find the IP address of the printer

Sometimes there are situations when the user needs to find out the current IP address of the printer. For example, such a task may appear due to the fact that this address has changed in the printing device, and your OS does not know about it and the software tries to send a document intended for printing to the old address, but as a result, the file remains NOT printed.

Second way

To determine the current network name of the printer, you can open the settings of the router (if the connection was organized precisely on it) and find information about the network location of the device there.

  • For this purpose, in the router settings, open the tab with the home network and go to the “Devices” tab.
  • After that, you will see a list of devices connected to the LAN at the current time.
  • Find your device among them and write down / remember its IP address.

Fifth way

Install a special application from the CD supplied with the printer to monitor the status of the cartridge, perform head cleaning for printing, etc. After installing such software, you just need to launch it and open the section with parameters. There are a number of buttons that are responsible for various options. To get an answer to your question, you need to name any of them.

Sixth way

In addition to the described methods, you can use special software designed to scan the network. For example, an excellent option is the Advanced IP Scanner network scanner, which compares favorably with some other options in that it has a Russian interface and is completely free. After completing the scanning procedure, you will receive a whole list of devices connected to the network, among which there is a printer.

WORLD OF PC PERIPHERAL DEVICES

Technical magazine for service technicians

  • In the magazine

Service menu and PIN codes for entering the service menu of HP LaserJet printers

The Service Modes of Hewlett Packard LaserJet printers allow service technicians to access nonvolatile memory items such as serial number, page counter, maintenance counter, and more. For some time, HP has begun introducing a new approach to entering service modes in its printers, and this approach requires knowing a PIN code unique to each printer model.

The Service Modes of the Hewlett Packard Laser Jet family of laser printers allow you to set the page counter value at which a maintenance message will appear on the control panel. However, the installation of the page counter may be necessary in other cases as well, for example, when installing a new formatter board (PC data processing board, which contains interfaces for connecting the printer to a PC). This is because the page counter value is stored in the printer’s non-volatile memory (NVRAM). This memory is a microcircuit of electrically. reprogrammable ROM, also referred to in the literature as EEPROM, EEPROM, Flash memory. This memory is physically located on the formatter board. Therefore, if the formatter board is being replaced, then it is necessary to install a page counter, write down the value that was stored in it on the “old” board. Otherwise, when you install a new formatter board, you will receive a “new” printer, which has NOT printed a single page yet, ie. The page counter value is zero. Naturally, such a Page counter will not reflect the actual wear of the printer and its SEPARATE mechanisms.

READ  How To Connect HP 2630 Printer

In addition to the page counter, the printer’s NVRAM stores custom printer settings (Resolution, paper size, fuser temperature, font settings, and more). Sometimes it is necessary to reset all set values ​​and return to factory settings. This factory reset can also be done using the printer’s service modes.

In service modes, other possibilities appear, for example, such as:

In printers of earlier models, to enter service modes and to perform other functions, it was necessary to turn off the printer and after a certain period of time turn it on again while holding down the corresponding keys on the control panel (most often the [Cancel] and [Select] buttons).

But in modern models of printers, they decided to use another option, in which it is assumed that in the user menu of the printer there is initially an item called Service (Service Mode). However, it is impossible to SIMply get to the Service section through the user menu. When trying to enter this section of the menu, the printer asks for a password (PIN). By entering the correct PIN-code, access to the service menu is allowed and its items become available. The whole difficulty of this method lies in the fact that each printer model has its own unique PIN code, which, of course, does not fit other models.

In order for a service specialist to work professionally with all modern models of Hewlett Packard printers, we present a summary table (Table 1) of passwords for entering their service modes. This pivot table will allow engineers to have the necessary information at hand, rather than hunt for it in service manuals and second sources of information.

Table 1. PIN codes for entering service mode for HP LaserJet printers

Printer model

PIN code

About WPS protocol

This concludes the review. Traditionally. comments are open for your comments and additions. Other readers will definitely be happy about it! See you soon!

This article will be of interest to engineers and printer repairmen. The Service Modes of Hewlett Packard LaserJet printers allow service technicians to access non-volatile memory items such as serial number, page counter, maintenance counter, and the like. For some time, HP has begun introducing a new approach to entering service modes in its printers, and this approach requires knowledge of a PIN code unique to each printer model, which is suitable only for a specific model. In printers of earlier models, to enter service modes and to perform other functions, it was necessary to turn off the printer and after a certain period of time turn it on again while holding down the corresponding keys on the control panel (most often the [Cancel] and [Select] buttons). now you just need to enter the password-code to access the menu (Service Mode).

Among the mandatory items of the service menu we will find: 1.Clear Event Log 2.Set the Total Page Count 3.Set the Maintenance Count 4.Set the Maintenance Interval 5.Install Serial Number 6.Cold Reset Paper 7.Setting Service ID.

In order for a service specialist to work professionally with all modern models of Hewlett Packard printers, we present a summary table of passwords for entering their service modes. This pivot table will allow engineers to have the necessary information at hand, rather than hunt for it in service manuals and second sources of information.

The procedure for connecting a printer to a computer is constantly being improved. Previously, devices for printing required an LPT port, then they switched to a universal USB interface. Today you can connect your printer via Wi-Fi without worrying about extra wires.

At the same time, the quality or speed of printing will NOT deteriorate. the wireless connection provides exactly the same capabilities as the standard connection using a cable.

About the sticker on the bottom

If you just bought a router, and it already offers you to use the pin code when connecting, look at the bottom and carefully look at the sticker:

Where To Find Your HP Printer Pin

This code comes straight out of the box. Doesn’t fit? Try to reset the router to factory settings (it will kill the entire Internet, and do not perform it if I do not understand anything in the router settings). And if it doesn’t fit at all? Then you need to go into the settings.

About connection technology

WPS (Wi-Fi Protected Setup) is a technology of “convenient” connection to Wi-Fi networks. Instead of a big and terrible password, when using it, it became possible to connect to Wi-Fi networks using a short digital PIN code or without it at all.

This is especially convenient when using devices that are clearly not intended for input from them. printers, repeaters, TVs, etc. Yes, even on a computer. you don’t have to remember the password, but just press a button on the router, and the connection will become passwordless.

But what if you still need a PIN? Where to get it in this case? We will talk about all the options below.

Using WPS protocol

The easiest way to connect a printer via Wi-Fi is to use the WPS method, which, although it is NOT secure, provides a fairly stable connection. When setting up the printer, in this case, neither the network name nor its access code is required.

  • Printer and router Must support WPS technology.
  • The wireless network must be secured with WPA or WPA2 (WEP will NOT work). Since these two encryption standards are recommended and Most used, there will be NO problems with their choice.
  • Disable MAC address filtering on the router.
READ  Dcp L2500dr Printer Reset Toner

How can you tell if your printing device supports WPS? The most logical way is to look in the specification or on the official website of the manufacturer.

To connect via WPS, you need a PIN code, which can be found on the sticker located on the bottom of the printer. The PIN code must be eight digits and located next to the WPS icon.

The next step is to enable WPS on your router. You can find an item that allows you to carry out this operation in the router interface on the “Wireless” or “Wi-Fi” tab. Use the built-in search to find the item you need faster. Enable WPS and save the new router configuration.

Some models of the router have a hardware key, pressing which activates the WPS function. If you have such a router, be sure to click on this button before trying to pair devices. A SIMilar button can be on the printer. you also need to press it.

If the device for printing is not equipped with a hardware WPS enable button, we activate this function through the digital panel. An approximate path looks like this:

If the connection is successful, the indicator light on both devices will light up.

Wps PIN for HP laserjet printer

Welcome to our portal! In this article, we will talk about WPS PIN from all sides. What is it for, how to see how to connect without it, the main vulnerabilities and protection methods, standard PIN codes for different models of routers and much more.

Applications. WPS PIN Databases

As you know, phones are generally NOT adapted due to their insufficient power to analyze the security of wireless networks, so application developers have found another interesting way. to try to guess WPS passwords for old routers. Well, remember, I wrote above that the same password was stamped on them everywhere? So these passwords were collected in a single database, and checks on a limited list take much less time than a full-fledged search.

Such technology leaves much to be desired during selection. the percentage of vulnerable models is very low. But I still recommend checking my home router. so that there are no problems later. Applications are easy They are searched in the same Play Market (checking your router is not prohibited), but we have already considered some of them:

Despite the formidable names, these applications cannot do anything particularly dangerous, because K. Their use is very limited. But check yourself. let’s say.

Enabling and entering your code

You can disable WPS completely or change its password in the settings of your router. To do this, you need to enter it and change it. everything is very SIMple. Don’t know how to enter the settings? It will not be possible to tell about all the models in one article, so I strongly recommend that you find your exact model in the search on our website. There will definitely be ready-made instructions for entering and basic setup.

After entering, you need to find the desired section. It looks like this to me:

Please note that it is now disabled (why I do this. I’ll tell you below). If necessary, you can enable and change the password, and in case of urgent need. connect an external device by entering its code through the button “Add device”.

Known vulnerabilities

Vulnerabilities of the technology were found almost immediately:

  • Older devices (routers) often had WPS enabled by default and had the same passwords. i.e. In theory, you could find a known password from the same router and connect to it. New models try to turn off WPS, and passwords are generated randomly.
  • Password brute-force. this problem has become more serious. In the process of studying the technology, it became clear that it was not necessary to enumerate all 8 digits. it was enough to enumerate 4, and the second half would be selected by itself. In total, these 10,000 options can be sorted out in a few hours. Modern routers struggle with this introduction of latency between requests or limiting input attempts. But the danger still exists.

As a result, I personally turned off this technology in myself. It is convenient, but if necessary, you can turn it on manually. At the same time, it is unlikely that you will find some kind of malicious burglar, but.

Connection wizard

If the WPS technology does not suit you, you can use the second method, which is to work with the built-in wizard for establishing a wireless connection.

How to determine this? If the printer supports WEP or WPA authentication, then it will certainly be equipped with a built-in tool for quickly creating a wireless network connection.

What information you need:

  • Encryption key, which is a wireless access code.
  • Wireless network name “SSID”.

So, you managed to connect your router and set up a wireless network. Now you need to connect the printer to your computer using a Wi-Fi connection. To perform this operation, you will have to work a little with the parameters of the device for printing.

  • Locate the printer control panel and go to the Settings menu.
  • Open the “Network” section. The built-in connection setup wizard will display a list of available connections, where you need to determine your wireless network by SSID.
  • Select the desired access point from the list provided. If your network is on the list, you will have to enter its name manually, respecting the case.
  • Enter WEP passcode or WPA password to connect.
READ  HP Laserjet Printer Cannot Connect

After completing THESE SIMple steps, the printer will connect to your computer wirelessly. Make sure the connection is correct by sending a document to the printer.

Connecting to a Wi-Fi network using WPS standard

The WPS (Wi-Fi Protected Setup) quick setup function is supported by many modern Wi-Fi network devices (for example, smartphones, tablets, SMART TVs, printers). The purpose of the WPS mechanism is to SIMplify the process of connecting to a wireless network between devices compatible with this technology. WPS can be used with Microsoft Windows, Android and WPS-compliant devices.

Keenetic Internet centers Equipped with a (Wi-Fi network control) button. This button allows you to quickly and securely connect 802.11b / g / n wireless devices for 2.4 GHz and 802.11a / n / ac for 5 GHz networks to the Keenetic’s Wi-Fi network that support the WPS standard. A short press on the button starts the Quick Connect (WPS) function. In the factory settings (default settings), the WPS function is enabled in Keenetic.

On devices with an operating system that supports setting up a Wi-Fi network using the WPS protocol, for example, on Windows laptops or on Android smartphones, you can use automatic setup and, at the invitation of the operating system, press a button on the Keenetic.

This feature can be used Not only to connect a wireless client to the Keenetic, but also to connect two Keenetic (for example, when one works as a main router with a Wi-Fi access point, and the other from the extended mode “Adapter” or “Amplifier / Repeater”).

NOTE: Important! WPS quick setup function via (Wi-Fi) button Will not work if Hide SSID is enabled in the access point settings.

IOS devices (iPhone, iPad) DO NOT support WPS.

TIP: Tip: If you cannot connect the printer to the Keenetic Wi-Fi network using the WPS quick setup button, you can use the WPS PIN code, which is available on many printers equipped with a wireless Wi-Fi adapter. You will find information about this connection method in the article: “Connecting to the printer’s Wi-Fi network, Using its WPS PIN code”.

Example of connecting an Android smartphone

NOTE: Important! On different devices, and depending on the version of Android, the settings may differ. But the procedure will be approximately the same.

Go to Wi-Fi settings, select “Advanced (Advanced) functions”, and then click on “WPS button”.

After that, the WPS connection process will start. You will see a message like: “Press the” Wi-Fi Secure Setup “or” Wi-Fi Protected Setup “button on the router. It may be called WPS or be marked with a symbol”.

Then you need to press the corresponding WPS button on the router and after a few seconds the mobile device will automatically connect to the Wi-Fi network.

Example of connecting a Windows laptop

In the Windows 10 notification area, click on the Wi-Fi icon, turn on Wi-Fi mode if necessary, after which you will see a list of available wireless networks.

Select the name of the desired network, after which a window for connecting to the selected access point will appear. Click Connect. Then a message will appear: “Enter the network security key. You can also connect by pressing the button on the router.”

Then you need to press the corresponding WPS button on the router and after a few seconds the laptop will automatically connect to the Wi-Fi network.

TIP: Note

Question: On the Internet you can find a lot of information that for the security of the wireless network, you should turn off the WPS mode on the router. Is it worth doing?

Answer: By default, the Wi-Fi network of the Keenetic is protected by the IEEE 802.11i (WPA2-AES) security standard. It is impossible to connect to such a network and the concepts of the information transmitted in it, and not knowing its network security key (network password).

But despite the SIMplicity and convenience of the WPS protocol, information about security vulnerabilities appears from time to time. You can find more information on the Internet (for example, in Wikipedia: https://en.Wikipedia.org/wiki/Wi-Fi_Protected_Setup).

As for Keenetic series Internet centers, all potentially vulnerable WPS options are disabled in our devices (by default, the function of using the pin code is disabled, and the aLGorithm for entering the pin code has been specially modified against hacking). Keenetic uses support for the WPSv2 mechanism. Protection has been added against all currently known vulnerabilities associated with the WPS protocol (including Pixie Dust attacks).

However, to increase the security level of the router’s wireless network, you can disable the WPS quick setup function. This can be done in the web configurator on the “Home network” page in the “Wireless Wi-Fi network” section, clicked on “Advanced settings”. Disable the “Allow WPS” option and save the settings.