Why does the printer print faintly when the cartridge is full?

Air humidity too low

In winter, when the heating is on, the air humidity regime is often not observed in homes and offices. For the normal operation of equipment and the well-being of people, it should be 50-70% (checked with a hygrometer). Nevertheless, in many rooms the indicator drops to 10-20%. And this can really greatly affect the performance of the printer after refueling or at any other time.

Setting “Economy Printing

Laser printers have this software option. If you notice that the printer prints faintly when the cartridge is full, check it first. This function serves to increase the life of the cartridge by changing the way the colorant is dispensed. But the quality of the printed data suffers noticeably.

Decision

It is best to turn off the Economy Print function immediately after purchasing a laser printer. Don’t worry about overspending, the savings really aren’t that much. within 70 sheets.

For HP LaserJet devices, the option is located in the Preferences window under the Finishing tab and is a checkbox called EconoMode (save toner). It can also be called slightly differently, such as economy, draft, etc. Just uncheck it and save your changes. On some other models, including inkjet, the function can be enabled or disabled using the corresponding button on the body.

Decision

For a replacement service, it is best to contact the service, since there are many subtleties when assembling and disassembling cartridges! But you can also clean the squeegee at home. In the process of its use, a strip of compressed toner is formed along the edge on one side. Because of this layer, the squeegee cannot move as close as possible to the magnetic shaft; the frictional force is reduced and the print becomes fainter. In this case, it’s time to clean up.

No solvents can be used here, they can damage the chemical composition of the part and disrupt its working properties. This is especially true for acetone. For a start, dry, lint-free rags will suffice. If dry cleaning did not completely remove the growths, then you can slightly wet the rag with distilled water. If the build-up still holds, then you will have to either completely change the squeegee, or put up with it and print with defects.

does, printer, print, faintly, cartridge, full

Out of paint

When a toner cartridge prints faintly, it could be because toner is running low on the inside. It is necessary to check whether this is so. Laser printer owners can also try this method: take out the cartridge and shake it a little (very gently), then put it back. With a high degree of probability, this will extend the life of a high-quality print, since the remaining toner will collect together and begin to be actively used by the device.

Malfunctions of spare parts of a laser printer or MFP

Faint printing may be due to a physical problem with the product. Often the problem can be solved only in a radical way. by replacing the magnetic shaft, only its shell, or the metering blade. Also, a dirty squeegee may be the reason why prints suddenly turn pale. It is best to change both the shaft and the blade at the same time, which will significantly extend the service life of the device and significantly increase the picture quality, removing pallor.

Dirty magnetic roller

Another reason why the printer prints faintly is wear or clogging of the magnetic roller due to long-term use. How to fix? Wear cannot be eliminated, it is an irreversible process. But it is quite possible to remove pollution and even on your own.

Decision

You will need a very strong solvent to remove the toner that has become trapped in the “pores” of the device. Acetone is suitable for this purpose. But you need to wipe it carefully, without using unnecessary efforts. the shaft is rough, and if this roughness is damaged, the print quality will deteriorate. Also, after the procedure, be sure to ventilate the room and observe the full range of precautions. take care of your eyes, respiratory tract.

When all the pores are visually cleaned, you can assemble the cartridge and try to print the sheet. After that, the image should become sufficiently clear and of high quality. What if this doesn’t fix the problem? Then you have to contact the service center.

Why does the printer print faintly when the cartridge is full?

nbsp RM, Saransk, Kirov st., 66

Why does the printer print faintly when the cartridge is full?

Each user of a printing device sooner or later encounters any malfunctions in the operation of the software or technical part of his printer or MFP. Most often, the owner of printing equipment has a need to deal with a problem that affects the performance of printing equipment: why the printer prints faintly with a full cartridge. The solution to this problem is relevant for those who deal with various models of laser printers. However, if the printer prints faintly, do not rush to return it to the specialists from the service center for repair. You can cope with this problem on your own, the main thing. identify and correct the cause of faint print cartridge.

Print quality can be determined by the voltage on the photo roll, the power of the laser radiation, the brightness of the toner itself, as well as the ratio of its amount falling on the roll and directly transferred to the paper. However, the greatest influence on the brightness and optical density of the print is made precisely by the amount of toner that falls on the photo roll.

How can you troubleshoot printer malfunctions? If the dullness of the laser print becomes particularly pronounced, you should check if the machine is set to “economical print” mode. Typically this setting is made to reduce the brightness of the print to extend the life of the cartridge. However, this tactic is applicable when there is sufficient toner in the cartridge. If the toner supply is used up more than half, the print quality in this mode of operation is significantly reduced, that is, the texts become fainter and, over time, almost unreadable. Therefore, the owners of laser printers should refuse to use this function when printing documents, especially since it will be possible to save a little with it, a maximum of 5-10%.

Sometimes there are situations when a freshly refilled cartridge still does not print well. Replacing cartridge parts can help in this situation. The greatest influence on brightness is exerted by the magnetic roller and the photo roller. Fotoval cannot be restored. just replace it with a new one, and it is better to replace the magnetic shaft. Replacing parts will bring print quality back to its original high level.

However, complete replacement of parts is not always possible due to lack of finance, and in such cases, you can try other ways to restore the cartridge to work. The brightness of the print, in particular, is influenced by the state of the surface of the magnetic roller. Over time, it loses its roughness, and this process can be caused by two reasons: due to its abrasion during operation (in this case, only replacing the magnetic roller can help) and due to clogging of the “pores” of this part with toner particles, as a result of which the roughness of the shaft, and, accordingly, the print quality, is significantly reduced.

If the magnesium roller is no longer rough due to toner adhering to it, then you can try to clean it with a powerful solvent. This manipulation will help to partially restore the brightness of the print. The magnetic roller is usually cleaned of adhering toner with acetone. it is the cheapest and most effective solvent. However, try not to overdo it when working with this substance, because excessive use of acetone can damage the surface of the magnetic roller. Also, do not forget about good ventilation of the working room, so as not to poison yourself with acetone vapors. After thorough cleaning of the magnetic roller, you need to start printing a test page.

This method does not always give the desired result, because very often, the brightness of the print drops due to wear on the cartridge components. In the absence of experience, an attempt to repair yourself can lead to sad consequences. We recommend that you contact the service center for help in resolving print quality problems.

Solving the problem with faint printing on the printer

Each of the problems discussed below appears with a different frequency, so you need to start checking with the most effective options, which we recommend doing. All methods of solution are arranged from the most effective and frequent to those rarely encountered in order to simplify the procedure for solving the task.

Disabling Economy Mode

Economy Print Mode enabled is the only software issue that causes faint printing. We put it in second place, since the solution is quite simple, and even a novice user can perform the necessary actions. Economy mode can be deactivated as follows:

    Open “Start” and go to “Control Panel”.

Click on the required PCM device and find the item “Printing Properties” or “Printing Preferences”.

Move to the “Finishing” tab.

Set the profile “Default” or uncheck the box “Economical printing”.

Factory defect in the original cartridge

Are you experiencing problems with your original toner cartridge and there is no doubt about the performance of your drum unit? Then the faint print may be caused by a factory defect.!

But before you run to the service center for warranty service, perform the following sequence of actions:

  • check the printer for system errors;
  • find out the remainder of the toner, if it is not enough, turn off the economical ink consumption mode;
  • shake the cartridge, change the paper and test the print.

If none of the above points helped, then feel free to seek qualified help.

Cleaning the cartridges

Sometimes there are situations when the printer does not print well immediately after refueling, or there is still a lot of ink in the ink tanks, and the image appears faint. Then the reason lies in the cartridges themselves and their contamination. There are two ways to get rid of the problem, however, each of them involves first removing the part from the device and manually performing all the actions, which you can aboutHonor from our next material.

READ  How To Find The Password From The HP Printer

Above, you were familiar with all the available methods for solving problems with print quality. Of course, almost all of them can be solved independently, however, inexperienced users are better off contacting a master about replacing components. In addition, it should be borne in mind that working in a room with high humidity also provokes the appearance of defects during printing.

Thank the author, share the article on social networks.

Any owner of a printer or MFP has to solve various kinds of problems associated with both the hardware and software of the device over time. One of the fairly common problems is why the printer prints faintly when the cartridge is full. This problem is perhaps one of the most pressing among all models of laser printing devices. If your printer begins to print faintly, then do not rush to the nearest service center, because you can solve this issue completely on your own. The main thing is to treat it with all seriousness and responsibility, because the sources of this problem can be very different.

In general, a light image is due to insufficient optical density of the laser device. This parameter depends on the charging voltage of the photo roll, the power of the laser flow, the “blackness” of the toner, its amount transferred to the drum and the amount transferred directly to the surface of the paper. Of all the listed values, the amount of dye transferred to the photo roll is of particular importance. the optical density of the print largely depends on this parameter.

Checking the cartridge

Of course, at first, suspicions fall on the finished ink in the cartridges, therefore, they should be checked first. We advise users of laser devices to carefully remove the ink tank and shake it, and then check the print again. These movements will collect toner residues in one place and allow them to be used normally, ensuring high-quality printing for a while. However, if this does not help, it is necessary to refuel. As for the owners of inkjet devices, here you need to inspect the cartridge for smudges or try it by weight. You will find detailed guides on refilling ink tanks in our other article by clicking on the link below.

Canon printer prints faintly what to do

From time to time, almost every owner of a printing device is faced with the appearance of a faint print. However, this difficulty does not always indicate the end of ink in the cartridge. It can be caused by other hardware and software problems that need to be resolved quickly in order to continue printing. Within the framework of this article, we would like to consider all these problems and present the available options for solving it.

Faint printing on a laser printer? Causes of malfunctions!

Faint printing on laser printers. HP, Samsung, Canon, Brother, Kyocera, Xerox, Ricoh and other popular brands. occurs, in most cases, due to wear of the drum.

The design of a cartridge with an imaging drum inside is widely used by HP, Samsung, Canon and other companies. Practice shows that after the third filling with toner, their print gradually fades. This makes sense as the manufacturer does not expect you to reuse the disposable cartridge.

Brother and Ricoh printers, on the other hand, work with two separate printhead components: a drum cartridge and a toner cartridge. These MFPs count the drum mileage. It can be seen on the display or in the menu of the proprietary application.

It’s no secret that the original drum cartridges are capable of working many times more than the manufacturer’s stated standards. Therefore, many users simply reset the drum counter and continue to use the printer as usual. However, there is a limit to everything [].

Drum wear is not the only reason faint prints can appear. Let’s take a look at the most popular options!

The printer is faint when the cartridge is full

Any owner of a printer or MFP has to solve various kinds of problems associated with both the hardware and software of the device over time. One of the fairly common problems is why the printer prints faintly when the cartridge is full. This problem is perhaps one of the most pressing among all models of laser printing devices. If your printer begins to print faintly, then do not rush to the nearest service center, because you can solve this issue completely on your own. The main thing is to treat it with all seriousness and responsibility, because the sources of this problem can be very different.

In general, a light image is due to insufficient optical density of the laser device. This parameter depends on the charging voltage of the photo roll, the power of the laser flow, the “blackness” of the toner, its amount transferred to the drum and the amount transferred directly to the surface of the paper. Of all the listed values, the amount of dye transferred to the photo roll is of particular importance. the optical density of the print largely depends on this parameter.

Checking the settings

The first reason a laser printer prints faintly is its setup. Many models, such as HP or Canon, have an option called “Economical Printing”. It helps to extend the life of the cartridge:

  • Distributes ink first to cover more printed pages.
  • As soon as about half of the paint remains, the device enters economy mode. As a result, the printer prints too faintly.

Disabling this setting will help fix the situation. Thanks to her, you can print several pages or more photos. However, image quality will suffer.

Possible breakdowns

The laser printer prints faintly after refueling and due to cartridge breakage. This element is not durable, therefore it often fails. Any malfunction of any complexity reduces the brightness of the print, even if the cartridge is full.

The main parts of the cartridge are the magnetic shaft and squeegee.

  • The roller sticks the ink to the drum unit. The paint receives a negative charge from the shaft. The drum is positively charged. The potential difference promotes adhesion. The larger this value, the more ink will fall on the drum and the sharper the image on paper will be.
  • A squeegee is a device that dispenses paint and distributes it evenly along the magnetic roller.

In normal condition, these parts should not have any chipping. However, during printing, the edges are warped, causing white streaks to appear in images. But most of the time, the printer prints faintly.

It is worth noting that the cartridges work the same on almost all models of such devices. But the process of their production is different:

  • Metal is used to make HP and Canon magnetic rolls. Their top layer is rubberized. Squeegees from these companies are polyurethane.
  • Samsung shafts are made entirely of rubber. Squeegees in most cases metal.

An effective way to solve the above problems is to replace the failed parts. The print quality will improve immediately and the image will be brighter.

Sometimes it happens that the shaft and squeegee are not worn out at all, the cartridge is full, but the HP printer prints faintly. In such cases, it is necessary to clean them from excess paint.

How to refill the cartridge correctly

In order for the laser printer to print high-quality images, it is necessary to properly refill the cartridges.

Both HP and Canon and other models are refueled in about the same way:

  • Cover the work surface with paper.
  • Remove the cartridge.
  • Using pliers, remove the grommets that secure the drum unit. Then get the drum itself. Wrap it in a clean soft cloth and put it in a dark place.
  • Divide the cartridge into two halves. They are usually secured with pins. They need to be taken out or, conversely, driven inside (removed after opening the part).
  • Carefully, without touching the rollers with your fingers, remove the rubber element located under the drum. Remove the fixing screws and squeegee.
  • Shake out the trash.
  • Collect all parts back.
  • Unscrew the cover of the part of the cartridge that contains the paint container. Pull out the plug.
  • Add toner. It is important that the container is not completely filled. This could damage the device. Ideal for standard colorant packaging.
  • Reinsert the plug.
  • Collect cartridge.

It is worth remembering that in laser printers the cartridge can withstand up to 15 refills. Refueling together with the replacement of some elements (shaft and squeegee) is a restoration. The feasibility of its implementation depends on the capacity of the cartridge. If it is increased, the restoration should be carried out with each refueling. If the cartridge is standard, this procedure is performed much less frequently.

So, we figured out why the printer prints faintly after refueling. There can be many reasons. this is an incorrect configuration of the device, and an insufficient amount of toner, and a malfunction of the cartridge. You can solve problems at home. It is enough to replace the defective parts, add dye or reconfigure the printer.

What Are the Parts That Affect the Cartridge to Print Faintly??

The Developer Roller (developer roller, magnetic roller) charges the dye powder granules with a negative charge. Toner adheres to the drum due to the potential difference between the powder particles on the developer’s surface and the laser-illuminated areas on the drum. The greater the potential difference, the more powder will be transferred, the more saturated the color of the print.

A squeegee is a toner metering blade designed to distribute toner evenly over the developer.

The condition of these two parts plays a decisive role in the correct transfer of ink to the drum surface.

The new magnetic shaft and squeegee have a perfectly flat surface, without protrusions and notches. During use, toner residues accumulate on the surface of the blade, which leads to its curvature. Light longitudinal stripes appear on the paper. The porous surface of the rubber roller becomes clogged with the smallest particles of paint over time, which also causes defects on the paper.

READ  Why won't the printer print from the computer

The principle of operation of the cartridge is the same for all manufacturers, but the production technology is different. Developers Canon and HP are made of metal with a rubberized top layer, while Samsung is made entirely of rubber. Samsung and Brother squeegees are made from metal, while Canon and HP make blades from polyurethane. This polymer is stronger and more reliable than metal; only low-quality toner with large and “prickly” particles can damage such a squeegee.

The main problems and how to solve them

If you notice that your laser printer prints dimly, then first of all pay attention to the settings of this device. In this case, we are talking about a setting known as “Economical Printing”. The fact is that such a function helps to extend the operating life of the cartridge of the device, however, there is little sense from this, since this can adversely affect print quality. This function helps the device to properly distribute the dye supply. But when the toner in the cartridge hopper is less than half, then this setting begins to save it, as a result of which the device produces poor quality printing. In this case, printed documents may become fainter. Therefore, any owner of a laser printer can be advised to disable this function in advance, especially since it can save 40-70 additional pages at most.

If you are tired of a faint print, and even after the refueling has been completed, the printer does not print as it should, then this problem can be radically solved by replacing the sheath of the magnetic roller or the entire magnetic roller, as well as the metering blade. It is better to make such a replacement at the same time, due to which it will be possible to improve the print density parameter and the service life of the listed parts immediately by quite a decent amount. After that, the device should print as it did when it was first used. For the toner cartridge, try to refill it carefully and carefully. This will help you with an article on how to refill laser cartridges.

But if you cannot perform the simultaneous replacement of the elements described above for some reason, for example, for financial reasons, then you can resort to some other methods. It should be noted that the surface roughness of an element such as a magnetic roller can be reduced for reasons that consist in the wear of this part and filling the “pores” on its surface with a coloring matter. What to do in the first case? It is impossible to cope with shaft wear, because this process is irreversible. But the problem associated with its pollution can be completely solved, moreover, independently. To eliminate the filling of “pores” with toner, it is necessary to clean the roller using a strong solvent. After that, the printing printer should produce a sufficiently clear image.

To clean the “pores” of the magnetic roller, purchase an affordable product such as acetone. But at the same time, remember that you cannot use unnecessary effort, because thus, you can break the coating of the shaft and worsen its roughness. Also, do not forget that acetone is a toxic substance and, when using it, you must follow all precautions, including ventilation of the room. After clearing any “pores” clogged with toner, you need to print a test document. If you are completely satisfied with its quality, then the problem has been solved, otherwise you will have to contact the service center.

As practice shows, in order to solve the problem of faint printing after refilling the laser printer cartridge, it is advisable to clean the dispensing blade as well. The fact is that during the operation of the device for printing on the edge of this part, over time, a strip is formed, consisting of a pressed toner. This strip, as it were, pushes the metering blade away from the shaft, which negatively affects the friction force, which gradually decreases. That is why, in order to restore normal printing, you need to clean this part. To do this, use dry, lint-free wipes, which, if necessary, can be slightly moistened with distilled water, if the build-up of the dye has not gone away during dry cleaning. If even a damp cloth could not remove them, then it is better to change the blade, or use acetone.

As you can see, the problem with the fading laser cartridge is solved quite simply. But if even after the performed manipulations the device prints faintly, then perhaps the reason is in the device itself, perhaps it is the disease of your printer. Then with materials for a specific model by selecting it in the right drop-down menu.

Why does the printer print faintly after refilling?

A laser printer is a very handy device. Especially if it performs several functions at once (MFP). Its presence makes it possible to print documents, photographs without leaving home. However, sometimes the process is fraught with difficulties. One of them is a fuzzy image. It may appear even after the printer has been refilled and the cartridge is full. Why does the printer print faintly? What to do in this case?

The printer is faint when the cartridge is full

Any owner of a printer or MFP has to solve various kinds of problems associated with both the hardware and software of the device over time. One of the fairly common problems is why the printer prints faintly when the cartridge is full. This problem is perhaps one of the most pressing among all models of laser printing devices. If your printer begins to print faintly, then do not rush to the nearest service center, because you can solve this issue completely on your own. The main thing is to treat it with all seriousness and responsibility, because the sources of this problem can be very different.

In general, a light image is due to insufficient optical density of the laser device. This parameter depends on the charging voltage of the photo roll, the power of the laser flow, the “blackness” of the toner, its amount transferred to the drum and the amount transferred directly to the surface of the paper. Of all the listed values, the amount of dye transferred to the photo roll is of particular importance. the optical density of the print largely depends on this parameter.

The main problems and how to solve them

If you notice that your laser printer prints dimly, then first of all pay attention to the settings of this device. In this case, we are talking about a setting known as “Economical Printing”. The fact is that such a function helps to extend the operating life of the cartridge of the device, however, there is little sense from this, since this can adversely affect print quality. This function helps the device to properly distribute the dye supply. But when the toner in the cartridge hopper is less than half, then this setting begins to save it, as a result of which the device produces poor quality printing. In this case, printed documents may become fainter. Therefore, any owner of a laser printer can be advised to disable this function in advance, especially since it can save 40-70 additional pages at most.

If you are tired of a faint print, and even after the refueling has been completed, the printer does not print as it should, then this problem can be radically solved by replacing the shell of the magnetic roller or the entire magnetic roller, as well as the dispensing blade. It is better to make such a replacement at the same time, due to which it will be possible to improve the print density parameter and the service life of the listed parts immediately by quite a decent amount. After that, the device should print as it did when it was first used. For the toner cartridge, try to refill it carefully and carefully. This will help you with an article on how to refill laser cartridges.

But if you cannot perform the simultaneous replacement of the elements described above for some reason, for example, for financial reasons, then you can resort to some other methods. It should be noted that the surface roughness of an element such as a magnetic roller can decrease for reasons that are in the wear of this part and the filling of “pores” on its surface with a coloring matter. What to do in the first case? It is impossible to cope with shaft wear, because this process is irreversible. But the problem associated with its pollution can be completely solved, moreover, independently. To eliminate the filling of “pores” with toner, it is necessary to clean the roller using a strong solvent. After that, the printing printer should produce a sufficiently clear image.

To clean the “pores” of the magnetic roller, purchase an affordable product such as acetone. But at the same time, remember that you cannot use unnecessary effort, because thus, you can break the coating of the shaft and worsen its roughness. Also, do not forget that acetone is a toxic substance and, when using it, you must follow all precautions, including ventilation of the room. After clearing any “pores” clogged with toner, you need to print a test document. If you are completely satisfied with its quality, then the problem has been solved, otherwise you will have to contact the service center.

As practice shows, in order to solve the problem of faint printing after refilling the laser printer cartridge, it is advisable to clean the dispensing blade as well. The fact is that during the operation of the device for printing on the edge of this part, over time, a strip is formed, consisting of a pressed-in toner. This strip, as it were, pushes the metering blade away from the shaft, which negatively affects the friction force, which gradually decreases. That is why, in order to restore normal printing, you need to clean this part. To do this, use dry, lint-free wipes, which, if necessary, can be slightly moistened with distilled water, if the build-up of the dye has not gone away during dry cleaning. If even a damp cloth could not remove them, then it is better to change the blade, or use acetone.

READ  How to find the IP of the HP laserjet printer

As you can see, the problem with the fading laser cartridge is solved quite simply. But if even after the performed manipulations the device prints faintly, then perhaps the reason is in the device itself, perhaps it is the disease of your printer. Then with materials for a specific model by selecting it in the right drop-down menu.

Checking the cartridge

Of course, at first, suspicions fall on the finished ink in the cartridges, therefore, they should be checked first. We advise users of laser devices to carefully remove the ink tank and shake it, and then check the print again. These movements will collect toner residues in one place and allow them to be used normally, ensuring high-quality printing for a while. However, if this does not help, it is necessary to refuel. As for the owners of inkjet devices, here you need to inspect the cartridge for smudges or try it by weight. You will find detailed guides on refilling ink tanks in our other article by clicking on the link below.

Replacing the drum unit

The drum unit is one of the most important parts of a laser printer. An image is transferred to it, and then toner is gradually applied. This mechanism forms one of the printing steps. Over time, the drum unit loses its properties and performs less well, which affects the quality of the printed sheets. If you have been using the printer for a long time, it is recommended that you have this part replaced by a designated service center.

Solving faint printer problems

From time to time, almost every owner of a printing device is faced with the appearance of a faint print. However, this difficulty does not always indicate the end of ink in the cartridge. It can be caused by other hardware and software problems that need to be resolved quickly in order to continue printing. Within the framework of this article, we would like to consider all these problems and present the available options for solving it.

Solving the problem with faint printing on the printer

Each of the problems discussed below appears with a different frequency, so you need to start checking with the most effective options, which we recommend doing. All methods of solution are arranged from the most effective and frequent to those rarely encountered in order to simplify the procedure for solving the task.

Cleaning the fuser roller

In laser printers, toner is baked in a special oven, drying out and remaining on the paper. If, in addition to faint printing, you notice streaks on the sheets, most likely the problem is that some of the ink once remained on the upper roller of the stove and is now transferred to the paper, preventing the other ink from hardening. This problem is solved by simply cleaning the roller with a napkin or cotton pad. However, the printer will have to be disassembled before doing so. Detailed instructions on this topic are in the material at the link below.

Disabling Economy Mode

Economy Print Mode enabled is the only software issue that causes faint printing. We put it in second place, since the solution is quite simple, and even a novice user can perform the necessary actions. Economy mode can be deactivated as follows:

    Open “Start” and go to “Control Panel”.

Click on the required PCM device and find the item “Printing Properties” or “Printing Preferences”.

Move to the “Finishing” tab.

Set the profile “Default” or uncheck the box “Economical printing”.

After that, it is better to restart the printer and clear the print queue for the changes to take effect.

Cleaning the cartridges

Sometimes there are situations when the printer does not print well immediately after refueling, or there is still a lot of ink in the ink tanks, and the image appears faint. Then the reason lies in the cartridges themselves and their contamination. There are two ways to get rid of the problem, however, each of them involves first removing the part from the device and manually performing all the actions, which you can aboutHonor from our next material.

Above, you were familiar with all the available methods for solving problems with print quality. Of course, almost all of them can be solved independently, however, inexperienced users are better off contacting a master about replacing components. In addition, it should be borne in mind that working in a room with high humidity also provokes the appearance of defects during printing.

Stove problems

Understanding how laser printers work provides insight into why prints get faded.

  • The laser beam in the right places changes the charge of the particles on the surface of the drum to the opposite one. This is how an invisible drawing of the printed document is applied.
  • The dye is distributed by the dosing blade along the magnetic roller.
  • Toner is applied to the entire photocell, but adheres only to areas with a modified particle charge.

Due to a faulty stove, the coloring powder will not bake on the paper and crumble, which will lead to a faint image on the sheet.

When streaks appear on the printed document, ink may have spilled onto the top of the fuser roller. To fix the problem, just clean the roller with a napkin or sponge.

Eco-print mode enabled

A new cartridge may print faintly only as a result of a factory defect. If this reason is excluded, you need to refer to the print settings. The user could intentionally or mistakenly enable the economy mode.

  • Click on “Start”.
  • Choose “Control Panel”.
  • Click on “Devices and Printers”.
  • From the list provided, select the required device and right-click on it.

Depending on the printer, you sometimes need to go to the Finishing tab to turn it off. In the line “Profile” select “Default settings” or uncheck the box next to the item “Economical printing”.

After making changes to the settings, the printer must be rebooted and the print queue must be cleared.

Poor refilling of cartridges

When servicing in the SC, they could assemble the cartridge incorrectly, fail to check for the presence of conductive grease on the drum contacts, or even fill in counterfeit dye.

Poor quality consumables

The situation can only be corrected by refilling with another toner or ink. Change consumables to prevent recurring problem.

Low humidity

Due to the low air humidity, the oven of the laser printer does not bake the dye well. It is enough to move the printer to another room, let it stand for several hours under the new conditions, and try printing again. If transfer is not possible, you can use a household humidifier.

What to do with faint laser or inkjet printing

If, after refilling the cartridge, the printer prints faintly, but there is enough ink / toner, it is most likely that insufficiently qualified personnel are working in the service center. Poor ink quality can be the cause of faint printing when the cartridge is full.

Cartridge faults

If the cartridge is not new, the reasons for poor printing may lie in the breakdown or wear of certain parts of the printer.

    Fotoval. This is a cylinder 30 cm long and 2-3 cm thick. From above it is covered with a green or blue photocell. The coating is erased during operation. The edges of the photo roll will wear out faster, then black stripes will be visible on the edges of the sheet when printing. When the layer wears out completely, the output will be an even faint print.

Cleaning and preventing worn out parts will only eliminate the problem for a short time. An effective solution is their complete replacement.

Little ink or toner

Checking the Toner Level in a Laser Print Cartridge.

  • Turn off the power button on the device and unplug the power cord from the outlet.
  • Opening the cover on the front of the printer.
  • Pulling out the cartridge.
  • Shake it up Best done outdoors, on a balcony or in a well-ventilated room.
  • Insert it back into the device.
  • Check the print quality. For faint prints, the printer needs to be refilled.

Determining the ink level of an inkjet printer.

  • Disconnect the device from the network.
  • Open the lid.
  • Take out each can of dye one at a time.
  • Checking the amount of ink in the can.
  • A can with less paint than the required level requires refueling.